bfd:Sess
BFD Session
Telemetry Sensor Path(s)
Operational Properties 
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES | 
|---|---|---|---|
| asyncPort | l4:Port (scalar:Uint16)  | 
Asynchronous mode Source Port | RANGE: [0 , 0xffff] DEFAULT: unspecified  | 
| authSeqno | bfd:AuthSeqno (scalar:Uint32)  | 
Authentication Sequence Number | RANGE: [0, 4294967295] | 
| authType | bfd:AuthT (scalar:Enum8)  | 
Active value of Authentication Type | SELECTION:  0     - none  4     - sha1  5     - met-sha1 DEFAULT: none  | 
| destAddr | address:Ip | 
Destination IP Address | Value must match ipv4 or ipv6 known format | 
| detectMult | bfd:DetectMult (scalar:UByte)  | 
Active value of Detection Multiplier | RANGE: [1 , 50] DEFAULT: 3  | 
| diag | bfd:DiagCode (scalar:Enum16)  | 
Protocol Diagnostic code | SELECTION:  0     - none  1     - detect-timeout  2     - echo-fail  3     - nbr-signal-down  4     - fwd-plane-reset  5     - path-down  6     - concat-path-down  7     - admin-down  8     - rev-concat-path-down  | 
| echoPort | l4:Port (scalar:Uint16)  | 
Echo mode Source Port | RANGE: [0 , 0xffff] DEFAULT: unspecified  | 
| echoTxIntvl | bfd:MinTxIntvl (scalar:Uint16)  | 
Active Value of Echo Tx Interval | RANGE: [50 , 999] DEFAULT: 50  | 
| flags | bfd:PktFlags (scalar:Bitmask16)  | 
Packet Flags | SELECTION:  1     - demand  2     - poll  4     - final  8     - authentication  16    - echo  16    - cbit  | 
| ifId | nw:IfId (base:IfIndex)  | 
Interface ID associated with the BFD session | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 | 
| iod | nw:Iod (scalar:Uint32)  | 
Interface ordinal associated with the BFD session | RANGE: [1 , 0xffffffff] DEFAULT: 1  | 
| lastDiag | bfd:DiagCode (scalar:Enum16)  | 
Last Diagnostic code | SELECTION:  0     - none  1     - detect-timeout  2     - echo-fail  3     - nbr-signal-down  4     - fwd-plane-reset  5     - path-down  6     - concat-path-down  7     - admin-down  8     - rev-concat-path-down  | 
| lastDownTime | scalar:Date | 
Last Down Time | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z | 
| lastTransTime | scalar:Date | 
Transition Time. Last time when protocol state changed | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z | 
| localDetectMult | bfd:DetectMult (scalar:UByte)  | 
Local value of Detection Multiplier | RANGE: [1 , 50] DEFAULT: 3  | 
| localMac | address:MAC | 
Local MAC Address | Value must match MM:MM:MM:SS:SS:SS format | 
| localRxIntvl | bfd:MinRxIntvl (scalar:Uint16)  | 
Local Value of Rx Interval | RANGE: [50 , 999] DEFAULT: 50  | 
| localTxIntvl | bfd:MinTxIntvl (scalar:Uint16)  | 
Local Value of Tx Interval | RANGE: [50 , 999] DEFAULT: 50  | 
| operSt | bfd:OperSt (scalar:Enum8)  | 
Operational State | SELECTION:  0     - admin-down  1     - down  2     - init  3     - up  | 
| remoteDiscr | bfd:Discr (scalar:Uint32)  | 
Remote Session Identifier of the BFD session | RANGE: [0, 4294967295] | 
| remoteMac | address:MAC | 
Remote MAC Address | Value must match MM:MM:MM:SS:SS:SS format | 
| remoteOperSt | bfd:OperSt (scalar:Enum8)  | 
Remote Operational State | SELECTION:  0     - admin-down  1     - down  2     - init  3     - up  | 
| rxIntvl | bfd:MinRxIntvl (scalar:Uint16)  | 
Active Value of Rx Interval | RANGE: [50 , 999] DEFAULT: 50  | 
| sessType | bfd:SessionType (scalar:Enum8)  | 
BFD Session Type. Types are Single-Hop, Multi-Hop and SRTE echo | SELECTION:  0     - single-hop  1     - multi-hop  2     - srte-echo  | 
| sessionDown | bfd:BfdFaultT (scalar:Enum8)  | 
Flag to indicate that BFD session is down | SELECTION:  0     - no  1     - yes DEFAULT: no  | 
| sessionType | bfd:SessionT (scalar:Enum8)  | 
BFD session type - single or multi hop | SELECTION:  1     - singlehop  2     - multihop  3     - ietf-bfd DEFAULT: singlehop  | 
| slowIntvl | bfd:SlowIntvl (scalar:Uint16)  | 
Active value of Slow Interval | RANGE: [1000 , 30000] DEFAULT: 2000  | 
| srcAddr | address:Ip | 
Source IP Address | Value must match ipv4 or ipv6 known format | 
| srteBsid | scalar:Uint32 | 
Binding Segment ID value Associated with BFD Session | RANGE: [0, 4294967295] | 
| txIntvl | bfd:MinTxIntvl (scalar:Uint16)  | 
Active Value of Tx Interval | RANGE: [50 , 999] DEFAULT: 50  | 
| vrfName | l3:VrfName (string:Basic)  | 
L3 Context Name | A sequence of characters | 
Internal Properties 
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES | 
|---|---|---|---|
| discr | bfd:Discr (scalar:Uint32)  | 
Local Session Identifier of the BFD session | RANGE: [0, 4294967295] | 
| modTs | mo:TStamp (scalar:Date)  | 
The time when this object was last modified. | SELECTION:  0     - never DEFAULT: never  | 
| status | mo:ModificationStatus (scalar:Bitmask32)  | 
The upgrade status. This property is for internal use only. | SELECTION:  2     - created  4     - modified  8     - deleted  16    - replaced  |