traceroute:ExecTn
An execution for an endpoint to endpoint (tenant) traceroute.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | action:AdminSt (scalar:Enum8) |
The administrative state of the object or policy. | SELECTION: 0 - unknown 1 - start 2 - stop 3 - suspend DEFAULT: unknown |
| descr | action:Descr (naming:Descr) |
Description | RANGE: [0 , 128] |
| dstIp | oam:IpId (address:Ip) |
The destination IP address. | Value must match ipv4 or ipv6 known format |
| dstMac | oam:MacId (address:MAC) |
Specifies the destination MAC address for the rule. | Value must match MM:MM:MM:SS:SS:SS format |
| freq | action:Freq (scalar:Time) |
Frequency at which tasks are executed | SELECTION: 0 - one-shot DEFAULT: one-shot |
| gwMac | oam:MacId (address:MAC) |
Gateway MAC | Value must match MM:MM:MM:SS:SS:SS format |
| name | oam:ProfName (naming:Name) |
The name of the object. | MAX SIZE: 16 |
| payloadSz | oam:PayloadSz (scalar:Uint16) |
Indicates the payload size. | RANGE: [20 , 8904] DEFAULT: 56 |
| srcIp | oam:IpId (address:Ip) |
The source IP address. Traffic from this IP address to the EP is counted | Value must match ipv4 or ipv6 known format |
| srcMac | oam:MacId (address:MAC) |
Specifies the source MAC address for the rule. | Value must match MM:MM:MM:SS:SS:SS format |
| srcNodeId | fabric:NodeId (scalar:Uint16) |
Source Node ID | RANGE: [1 , 16000] DEFAULT: 1 |
| tenant | oam:TenantName (naming:Name) |
Tenant Name | MAX SIZE: 16 |
| type | action:Type (scalar:Enum8) |
The specific type of the object or component. | SELECTION: 1 - clear 2 - reset 3 - reload 4 - locate 5 - install 6 - test 7 - collect 8 - interface-in-service DEFAULT: clear |
| useGwMac | scalar:Bool |
Flag to use Gateway MAC at Destination MAC | SELECTION: true or false DEFAULT: true |
| vrf | oam:Vrf (l3:VrfName) |
Identifies the VRF for the NTP providers | |
| vtep | address:Ip |
VTEP IP | Value must match ipv4 or ipv6 known format |
| vtepEncap | base:Encap |
VTEP Encapsulation | SELECTION: unknown, vlan-%d or vxlan-%d |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| operSt | action:OperSt (scalar:Enum8) |
The runtime state of the object or policy. | SELECTION: 0 - scheduled 1 - processing 2 - completed 3 - cancelled 4 - failed 5 - indeterminate 6 - suspended 7 - crashsuspect DEFAULT: scheduled |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| epT | oam:EpT (scalar:Enum8) |
Endpoint Type | SELECTION: 1 - ep 2 - vtep-ep 3 - node DEFAULT: node |
| maxHops | traceroute:Hops (scalar:UByte) |
Indicates the maximum number of hops that the traceroute took to reach the destination. | RANGE: [1 , 255] DEFAULT: 32 |
| maxPaths | traceroute:Paths (scalar:Uint16) |
Max Paths | RANGE: [1 , 512] DEFAULT: 50 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| peerClassId | mo:MoClassId |
The BGP neighbor. | |
| rSz | action:RetentionSize (scalar:Uint16) |
The retention size of the task results. | RANGE: [1 , 1024] DEFAULT: 100 |
| rTm | action:RetentionTime (scalar:Time) |
The retention time of the task results. | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| startTs | mo:TStamp (scalar:Date) |
The date and time when the task began. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |