eqpt:ExtChCard

The module on an extension chassis. The extended chassis is an extension of the fabric.

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
descr eqpt:Descr
 Description of the specified attribute
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
macB eqpt:MacAddr
(string:Basic)
Value is same as 'MAC-Address(es)' shown in show module
The MAC address base.		 A sequence of characters
macE eqpt:MacAddr
(string:Basic)
Value is same as 'MAC-Address(es)' shown in show module
The card MAC address end		 A sequence of characters
modModel eqpt:Model
(string:Basic)		 The chassis card module model. A sequence of characters
modSerial eqpt:Serial
(naming:Name)		 The extension chassis card module serial number.
MAX SIZE: 16
modVendor eqpt:Vendor
(string:Basic)		 The extension chassis card module vendor. A sequence of characters
operSt eqpt:COpSt
(scalar:Enum8)
Value is same as 'Status' shown in show module
The operational status.		 SELECTION:
0 - unknown
1 - inserted
2 - absent
3 - mismatch
4 - fail
5 - present
6 - removed
7 - online
8 - offline
9 - pwr-up
10 - pwr-down
11 - err-pwr-down
12 - testing
13 - init
14 - reg-failure
15 - dnld
16 - upg
17 - srg-fail
18 - ha-seq-fail
DEFAULT: unknown
powerActualDraw eqpt:Watts
(scalar:Uint32)		 It is the power value that module actually draw RANGE: [0, 4294967295]
powerAllocated eqpt:Watts
(scalar:Uint32)		 It is the power value that power supply allocated to the module RANGE: [0, 4294967295]
rdSt eqpt:RdSt
(scalar:Enum8)
Value is same as 'Status' shown in show module. Example: active, standby
The redundancy state.		 SELECTION:
0 - unknown
1 - active
2 - standby
DEFAULT: unknown
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
fwVer eqpt:Revision
(string:Basic)		 The card firmware revision A sequence of characters
DEFAULT: 0
id eqpt:Id
(scalar:Uint32)		 The item identifier. RANGE: [0, 4294967295]
mfgTm scalar:Date
 Manufacturing Time DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z
DEFAULT: not-applicable
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
model eqpt:Model
(string:Basic)		 Model A sequence of characters
numP eqpt:CardNumPorts
(scalar:Uint16)		 The number of ports on the card.
Value is same as 'Ports' shown in show module
RANGE: [0 , 256]
DEFAULT: 0
partNum eqpt:PartNum
(string:Basic)		 Module Part Number A sequence of characters
partNumber eqpt:PartNum
(string:Basic)		 The card part number
Value is same as 'Part Number' shown in show sprom module
A sequence of characters
pwrSt eqpt:PwrState
(scalar:Enum8)		 The power state of this card
Value is same as 'Status' shown in show environment power
SELECTION:
0 - unknown
1 - off
2 - on
3 - deny
4 - multi-boot-fail
DEFAULT: unknown
rev eqpt:Revision
(string:Basic)		 Revision A sequence of characters
DEFAULT: 0
ser eqpt:Serial
(naming:Name)		 Serial Number
MAX SIZE: 16
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced
swCId eqpt:CardId
(scalar:Uint32)		 The software card ID RANGE: [0, 4294967295]
swVer eqpt:Revision
(string:Basic)		 The card software revision
Value is same as 'Sw' shown in show module
A sequence of characters
DEFAULT: 0
type eqpt:CardT
(scalar:Enum16)		 The type of card. SELECTION:
0 - unknown
1 - supervisor
2 - linecard
3 - fabriccard
4 - sysctrlcard
5 - extchcard
6 - fan-tray
7 - power-supply
8 - lemcard
DEFAULT: extchcard
upTs scalar:Date
 The timestamp when card was detected
Value is same as 'Up Time' shown in show module uptime
DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z
vdrId eqpt:ModVid
(string:Basic)		 The card vdrId
Value is same as 'VID' shown in show sprom module
A sequence of characters
vendor eqpt:Vendor
(string:Basic)		 Vendor A sequence of characters
DEFAULT: Cisco Systems, Inc