eqpt:LEM
The line card information
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| descr | eqpt:Descr |
Description of the specified attribute |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| breakoutFactor | scalar:Uint32 |
The LEM card breakout factor | RANGE: [0, 4294967295] DEFAULT: 1 |
| hwVer | cap:Version (string:Basic) |
The hardware version of a card. | A sequence of characters |
| macB | eqpt:MacAddr (string:Basic) |
Value is same as 'MAC-Address(es)' shown in The MAC address base.show module |
A sequence of characters |
| macE | eqpt:MacAddr (string:Basic) |
Value is same as 'MAC-Address(es)' shown in The card MAC address endshow module |
A sequence of characters |
| numP | eqpt:CardNumPorts (scalar:Uint16) |
Value is same as 'Ports' shown in The number of ports on the card.show module |
RANGE: [0 , 256] DEFAULT: 0 |
| operSt | eqpt:COpSt (scalar:Enum8) |
Value is same as 'Status' shown in The operational status.show module |
SELECTION: 0 - unknown 1 - inserted 2 - absent 3 - mismatch 4 - fail 5 - present 6 - removed 7 - online 8 - offline 9 - pwr-up 10 - pwr-down 11 - err-pwr-down 12 - testing 13 - init 14 - reg-failure 15 - dnld 16 - upg 17 - srg-fail 18 - ha-seq-fail DEFAULT: unknown |
| partNumber | eqpt:PartNum (string:Basic) |
Value is same as 'Part Number' shown in The card part numbershow sprom module |
A sequence of characters |
| powerActualDraw | eqpt:Watts (scalar:Uint32) |
It is the power value that module actually draw | RANGE: [0, 4294967295] |
| powerAllocated | eqpt:Watts (scalar:Uint32) |
It is the power value that power supply allocated to the module | RANGE: [0, 4294967295] |
| purgeLemCfg | scalar:Bool |
Purge Config for LEM | SELECTION: true or false |
| swCId | eqpt:CardId (scalar:Uint32) |
The software card ID | RANGE: [0, 4294967295] |
| swVer | eqpt:Revision (string:Basic) |
Value is same as 'Sw' shown in The card software revisionshow module |
A sequence of characters DEFAULT: 0 |
| type | eqpt:CardT (scalar:Enum16) |
The type of card. | SELECTION: 0 - unknown 1 - supervisor 2 - linecard 3 - fabriccard 4 - sysctrlcard 5 - extchcard 6 - fan-tray 7 - power-supply 8 - lemcard DEFAULT: lemcard |
| vdrId | eqpt:ModVid (string:Basic) |
Value is same as 'VID' shown in The card vdrIdshow sprom module |
A sequence of characters |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | eqpt:Id (scalar:Uint32) |
The item identifier. | RANGE: [0, 4294967295] |
| lemid | scalar:Uint32 |
LEM Module Id | RANGE: [0, 4294967295] |
| mfgTm | scalar:Date |
Manufacturing Time | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z DEFAULT: not-applicable |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| model | eqpt:Model (string:Basic) |
Model | A sequence of characters |
| pwrSt | eqpt:PwrState (scalar:Enum8) |
The power state of this card | Value is same as 'Status' shown in SELECTION: show environment power0 - unknown 1 - off 2 - on 3 - deny 4 - multi-boot-fail DEFAULT: unknown |
| rev | eqpt:Revision (string:Basic) |
Revision | A sequence of characters DEFAULT: 0 |
| ser | eqpt:Serial (naming:Name) |
Serial Number | MAX SIZE: 16 |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| upTs | scalar:Date |
The timestamp when card was detected | Value is same as 'Up Time' shown in DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%zshow module uptime |
| vendor | eqpt:Vendor (string:Basic) |
Vendor | A sequence of characters DEFAULT: Cisco Systems, Inc |