eqpt:Psu
The power supply unit.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| descr | eqpt:Descr |
Description of the specified attribute |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| fanDirection | eqpt:AirDir (scalar:Enum8) |
The power supply unit fan air direction | SELECTION: 0 - unknown 1 - front2back 2 - back2front DEFAULT: unknown |
| fanOpSt | eqpt:OpSt (scalar:Enum8) |
The power supply fan's operational status. | SELECTION: 0 - unknown 1 - ok 2 - fail 3 - absent 4 - shut 5 - mismatch DEFAULT: unknown |
| hardwareAlarm | string:Basic |
It is shown if there is power supply hardware alarm | A sequence of characters |
| hwVer | cap:Version (string:Basic) |
The hardware version of a card. | A sequence of characters |
| iIn | eqpt:Amps (scalar:Float) |
The power supply input amps | A floating number per IEEE-754 standard |
| iInB | eqpt:Amps (scalar:Float) |
The power supply input amps for inlet2 | A floating number per IEEE-754 standard |
| iOut | eqpt:Amps (scalar:Float) |
The power supply output amps | A floating number per IEEE-754 standard |
| operSt | eqpt:OpSt (scalar:Enum8) |
The power supply status. | SELECTION: 0 - unknown 1 - ok 2 - fail 3 - absent 4 - shut 5 - mismatch DEFAULT: unknown |
| pIn | eqpt:Watts (scalar:Uint32) |
The power supply input watts | RANGE: [0, 4294967295] |
| pOut | eqpt:Watts (scalar:Uint32) |
The power supply output watts | RANGE: [0, 4294967295] |
| softwareAlarm | scalar:Bool |
It is shown if there is power supply software alarm | SELECTION: true or false |
| typeCordConnected | string:Basic |
The power supply type cord connected | A sequence of characters |
| vIn | eqpt:Volts (scalar:Float) |
The power supply input voltage | A floating number per IEEE-754 standard |
| vInB | eqpt:Volts (scalar:Float) |
The power supply input voltage for inlet2 | A floating number per IEEE-754 standard |
| vOut | eqpt:Volts (scalar:Float) |
The power supply output voltage | A floating number per IEEE-754 standard |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| cap | eqpt:Amps (scalar:Float) |
The power supply capacity in milli amps. | A floating number per IEEE-754 standard |
| drawnCurr | eqpt:Amps (scalar:Float) |
The power supply unit actual drawn/output current | A floating number per IEEE-754 standard |
| id | eqpt:Id (scalar:Uint32) |
The item identifier. | RANGE: [0, 4294967295] |
| inputCurr | eqpt:Amps (scalar:Float) |
The power supply unit input current | A floating number per IEEE-754 standard |
| mfgTm | scalar:Date |
Manufacturing Time | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z DEFAULT: not-applicable |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| model | eqpt:Model (string:Basic) |
Model | A sequence of characters |
| rev | eqpt:Revision (string:Basic) |
Revision | A sequence of characters DEFAULT: 0 |
| ser | eqpt:Serial (naming:Name) |
Serial Number | MAX SIZE: 16 |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| vSrc | eqpt:VSrc (scalar:Enum8) |
The power supply voltage source. | SELECTION: 0 - unknown 1 - 110v 2 - 220v DEFAULT: unknown |
| vdrId | eqpt:ModVid (string:Basic) |
The card vdrId | Value is same as 'VID' shown in A sequence of charactersshow sprom module |
| vendor | eqpt:Vendor (string:Basic) |
Vendor | A sequence of characters DEFAULT: Cisco Systems, Inc |
| volt | eqpt:Volts (scalar:Float) |
The power supply voltage. | A floating number per IEEE-754 standard |