ptm:L1Intf
Layer1 interface
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | l1:AdminSt (scalar:Enum8) |
Administrative port state | SELECTION: 1 - down 2 - up DEFAULT: up |
| autoNeg | l1:AutoNeg (scalar:Enum8) |
Administrative port auto-negotiation | SELECTION: 1 - on 2 - off 3 - 25G DEFAULT: on |
| cfgFlags | scalar:Uint32 |
Configuration options | RANGE: [0, 4294967295] DEFAULT: 0 |
| connType | ptm:L1ConnType (scalar:Uint32) |
Layer1 connection type on interface | SELECTION: 0 - patch 1 - tap |
| connectedIntf | nw:IfId (base:IfIndex) |
Layer1 connected interface id | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| descr | naming:Descr1024 (string:Basic) |
descr | MAX SIZE: 254 |
| duplex | l1:Duplex (scalar:Enum8) |
Duplex | SELECTION: 1 - auto 2 - full 3 - half DEFAULT: auto |
| ituChannel | l1:ItuChannel (scalar:Uint32) |
ITU Channel to support DWDM XCVR | RANGE: [1 , 96] DEFAULT: 32 |
| mtu | l1:Mtu (scalar:Uint32) |
Administrative port mtu | RANGE: [576 , 9216] DEFAULT: 1500 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| snmpTrapSt | l1:SnmpTrapSt (scalar:Enum8) |
Administrative port snmp trap state | SELECTION: 1 - enable 2 - disable DEFAULT: enable |
| speed | l1:Speed (scalar:Enum8) |
Administrative port speed | SELECTION: 0 - unknown 2 - 100M 3 - 1G 4 - 10G 5 - 40G 6 - auto 7 - auto 100M 8 - auto 100M 1G 9 - 100G 10 - 25G 11 - 10M 12 - 50G 13 - 200G 14 - 400G 15 - 2.5G 16 - 5G 17 - auto 2.5G 5G 10G 18 - auto 100M 1G 2.5G 5G 19 - 800G DEFAULT: auto |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| error | scalar:Uint64 |
Run time layer1 config failure code | RANGE: [0, 18446744073709551615] |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| switchingSt | l1:SwitchingSt (scalar:Enum8) |
Switching state | SELECTION: 0 - disabled 1 - enabled DEFAULT: disabled |