ephemeral
nvo:OperES
Operational MO for list of Ethernet segments
Telemetry Sensor Path(s)
Ephemeral Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| activeVLAN | string:Basic |
List of active virtual LANs | A sequence of characters |
| activeVNI | string:Basic |
List of active virtual network identifiers on Ethernet segment | A sequence of characters |
| anycastIp | address:IPv4 |
Anycast IP address on this Ethernet segment. | Value must match ipv4 format |
| anycastIpv6 | address:IPv6 |
Anycast IPv6 address on this Ethernet segment. | Value must match ipv6 format |
| bouncePeer | string:Basic |
ESI bounce peer IP address(es) | A sequence of characters |
| dfElectionMode | nvo:MultiHomingDfElectionModeT (scalar:Enum8) |
Operational DF election mode on this Ethernet segment | SELECTION: 0 - perFlow 1 - modulo DEFAULT: perFlow |
| dfList | string:Basic |
List of ESI peer IP addresses addresses in DF list | A sequence of characters |
| dfTimerExpiry | nvo:ETimeStamp (scalar:Date) |
DF timer expiry timestamp | SELECTION: 0 - NA DEFAULT: NA |
| dfTimerStrt | nvo:ETimeStamp (scalar:Date) |
Start time of DF timer | SELECTION: 0 - NA DEFAULT: NA |
| dfVLAN | string:Basic |
List of designated forwarder VLANs on ethernet-segment | A sequence of characters |
| eadRtAdded | scalar:Bool |
Operational state of EAD/ES route addition to L2RIB | SELECTION: true or false |
| esConfigSt | nvo:NveEsCfgT (scalar:Enum8) |
Ethernet segment config status | SELECTION: 0 - not-applicable 1 - add-pending 2 - delete-pending 3 - add-done-port-reinit-pending 4 - delete-done-port-reinit-pending 5 - done 6 - down-acknowledge-pending |
| esOperSt | l2:DomOperSt (scalar:Enum8) |
Operational state of configured Ethernet segment | SELECTION: 1 - up 2 - down 3 - unknown DEFAULT: down |
| esOrdinal | scalar:Uint16 |
Local ordinal of Ethernet segment | RANGE: [0, 65535] |
| esRtAdded | scalar:Bool |
Operational state of Ethernet segment route addition to L2RIB | SELECTION: true or false |
| id | string:Basic |
Ethernet segment identifier | A sequence of characters |
| learningMode | nvo:HostLearnModeT (scalar:Enum16) |
Indicates the host learning mode (control plane or data plane). | SELECTION: 1 - DP 2 - CP 3 - Ctrlr DEFAULT: DP |
| numESMem | scalar:Uint16 |
Number of Ethernet segment members | RANGE: [0, 65535] |
| nveIf | scalar:Uint32 |
Unit number of NVE interface for Ethernet segment | RANGE: [0, 4294967295] |
| nveIfSt | l2:DomOperSt (scalar:Enum8) |
Operational state of NVE interface | SELECTION: 1 - up 2 - down 3 - unknown DEFAULT: down |
| parentIf | nw:IfId (base:IfIndex) |
Parent interface of configured Ethernet segment | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| portChannelIfSt | nvo:PoIfStT (scalar:Enum8) |
Operational state of ES port-channel interface | SELECTION: 0 - not-applicable 1 - up 2 - down |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |