tunnelif:If
Tunnel Interface
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | l1:AdminSt (scalar:Enum8) |
Administrative state | SELECTION: 1 - down 2 - up DEFAULT: down |
| descr | naming:Descr1024 (string:Basic) |
Tunnel Description | MAX SIZE: 254 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| snmpTrapSt | tunnelif:SnmpTrapSt (scalar:Enum8) |
Snmp Trap State | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
| tunBW | tunnelif:TunnelBW (scalar:Uint32) |
Tunnel Bandwidth | RANGE: [1 , 10000000] DEFAULT: 9 |
| tunDestAddr | address:Ip |
Tunnel Destination | Value must match ipv4 or ipv6 known format |
| tunMode | tunnelif:TunnelMode (scalar:Enum8) |
Tunnel Mode | SELECTION: 1 - gre/ip 6 - gre/ipv6 7 - ipip/ip 8 - ipip/ipv6 9 - ipip/dcapany/ip 10 - ipip/dcapany/ipv6 11 - ipv6ip 12 - ipv6ip/dcapany 13 - ipv6ipv6 14 - ipv6ipv6/dcapany DEFAULT: gre/ip |
| tunMtu | tunnelif:TunnelMtu (scalar:Uint32) |
Tunnel MTU | RANGE: [64 , 9196] DEFAULT: 1476 |
| tunPMTUD | tunnelif:TunnelPMTUD (scalar:Enum8) |
Tunnel PMTU Discovery | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| tunPMTUage | tunnelif:TunnelPMTUAge (scalar:Uint32) |
Tunnel PMTU age | RANGE: [0 , 30] DEFAULT: 10 |
| tunSrcAddr | address:Ip |
Tunnel Source | Value must match ipv4 or ipv6 known format |
| tunSrcDirect | tunnelif:TunnelSrcDirect (scalar:Enum8) |
Tunnel Source | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| tunSrcIntf | nw:IfId (base:IfIndex) |
Tunnel Source | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| tunTTL | tunnelif:TunnelTTL (scalar:Uint32) |
Tunnel TTL | RANGE: [0 , 255] DEFAULT: 0 |
| tunVrf | tunnelif:TunnelTransVRF (l3:VrfName) |
Tunnel Transport VRF | DEFAULT: default |
| tunminPMTU | tunnelif:TunnelminPMTU (scalar:Uint32) |
Tunnel min PMTU | RANGE: [64 , 9196] DEFAULT: 64 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| lastCtrRstChgdTs | scalar:Time |
Last Counters Reset Timestamp | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| lastStateChgdTs | scalar:Time |
Last State Change Timestamp | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
| tunDelInProg | scalar:Bool |
Tunnel Deletion in Progress | SELECTION: true or false |
| tunIfIndex | scalar:Uint32 |
Tunnel Interface Index | RANGE: [0, 4294967295] |
| tunIfPmtu | scalar:Uint32 |
Tunnel Interface PMTU | RANGE: [0, 4294967295] |
| tunIntfOptions | tunnelif:TunnelOption (scalar:Enum16) |
Tunnel Interface Options | SELECTION: 0 - unknown 1 - del_on_fail 2 - usr_cfg_mtu DEFAULT: unknown |
| tunIod | scalar:Uint32 |
Tunnel Interface Ordinal | RANGE: [0, 4294967295] |
| tunOperSt | tunnelif:TunnelOperSt (scalar:Enum8) |
Tunnel Operational State | SELECTION: 1 - up 2 - down DEFAULT: down |
| tunOperStQual | tunnelif:TunnelOperStQual (scalar:Enum16) |
Tunnel Operational State Qualifier | SELECTION: 0 - unknown 1 - none 2 - initing 3 - incomp-conf 4 - dup-conf 5 - no-mode 6 - admin-down 7 - src-down 8 - src-unres 9 - no-dest 10 - desip-unres 11 - dest-unreach 12 - vrf-mismatch 13 - vrf-fwdref 14 - vrf-down 15 - mtu-error 16 - hwprog-fail 17 - no-src DEFAULT: unknown |
| tunRxBytes | scalar:Uint64 |
Tunnel Rx Bytes counter | RANGE: [0, 18446744073709551615] |
| tunRxPackets | scalar:Uint64 |
Tunnel Rx Packet counter | RANGE: [0, 18446744073709551615] |
| tunSrcIP | address:Ip |
Tunnel Source IP | Value must match ipv4 or ipv6 known format |
| tunTxBytes | scalar:Uint64 |
Tunnel Tx Bytes counter | RANGE: [0, 18446744073709551615] |
| tunTxPackets | scalar:Uint64 |
Tunnel Tx Packet counter | RANGE: [0, 18446744073709551615] |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |