span:ERDestination
The ERSPAN destination, which is where network traffic is sent for analysis by a network analyzer. When you create a traffic monitoring session, you must select an ERSPAN source and ERSPAN destination. The type of session (Tenant, Access, or Fabric) determines the allowed types of ERSPAN sources and destinations. The destination can be either a remote port or endpoint group. If the destination is a port, it should not be one that has been configured for other purposes.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| descr | pol:Descr |
Description | |
| name | naming:Name256 (string:Basic) |
Object name | MAX SIZE: 64 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| operSt | span:OperSt (scalar:Enum8) |
The operational state of the session. | SELECTION: 0 - unspecified 1 - up 2 - down 3 - failed 4 - partial DEFAULT: down |
| operStQual | span:OperStQual (scalar:Enum8) |
The operational state qualifier. | SELECTION: 1 - active 2 - no-hw-res 3 - no-oper-src-dst 4 - error 5 - no-src 6 - no-dst 7 - no-src-dst 8 - shut 9 - invalid-dst-mode 10 - invalid-src-mode 11 - invalid-vrf 12 - invalid-ip 13 - no-route 14 - no-eg-intf 15 - hw-err DEFAULT: no-oper-src-dst |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| dscp | qosp:Dscp (qosp:DscpCP) |
The DSCP value for sending the monitored packets using ERSPAN. | RANGE: [0 , 63] DEFAULT: 0 |
| dstIp | address:Ip |
The destination IP of the ERSPAN packet. | Value must match ipv4 or ipv6 known format |
| flowId | span:FlowId (scalar:Uint16) |
The flow ID of the ERSPAN packet. | RANGE: [1 , 1023] DEFAULT: 1 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| mtu | span:Mtu (scalar:Uint16) |
The MTU truncation size for the packets. | RANGE: [64 , 9216] DEFAULT: 1518 |
| srcIp | address:Ip |
The source IP of the ERSPAN packet. | Value must match ipv4 or ipv6 known format |
| status | mo:ModificationStatus (scalar:Bitmask32) |
Modification status | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| ttl | l3:Ttl (scalar:UByte) |
The time to live (ttl) value in the ERSPAN packet. | RANGE: [1 , 255] DEFAULT: 64 |
| type | span:DestEncapT (scalar:Enum8) |
The encapsulation type of the monitored packet sent to the destination. | SELECTION: 1 - gre DEFAULT: gre |
| ver | span:ErSpanVer (scalar:Enum8) |
The ERSPAN current version. | SELECTION: 1 - ver1 2 - ver2 DEFAULT: ver2 |
| vnid | base:Encap |
The VN ID for the VRF. | SELECTION: unknown, vlan-%d or vxlan-%d |
| vrfName | l3:VrfName (string:Basic) |
The VRF for the ERSPAN packet. | A sequence of characters |