isis:Dom
The IS-IS domain (vrf) information.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | nw:AdminSt (scalar:Enum8) |
Administative state | SELECTION: 1 - enabled 2 - disabled DEFAULT: enabled |
| bwRef | isis:BwRef (scalar:Uint32) |
The IS-IS domain bandwidth reference. This sets the default reference bandwidth used for calculating the IS-IS cost metric. | RANGE: [0, 4294967295] DEFAULT: 40000 |
| bwRefUnit | isis:BwRefUnit (scalar:Enum8) |
Bandwidth Reference Unit (Mbps or Gbps) | SELECTION: 0 - mbps 1 - gbps DEFAULT: mbps |
| ctrl | isis:DomControl (scalar:Bitmask8) |
Controls | SELECTION: 0 - unspecified 1 - log-adj-changes 2 - hostname-dynamic-disable DEFAULT: unspecified |
| isType | isis:IsT (scalar:Enum8) |
IS Type | SELECTION: 1 - l1 2 - l2 3 - l12 DEFAULT: l12 |
| lspLifetime | isis:MaxLSPLife (scalar:Uint32) |
LSP Lifetime | RANGE: [1 , 65535] DEFAULT: 1200 |
| metricStyle | isis:MetricStyle (scalar:Enum8) |
Metric Style | SELECTION: 1 - narrow 2 - wide 3 - transition DEFAULT: wide |
| mtu | isis:Mtu (scalar:Uint32) |
The configuration of link-state packet (LSP) maximum transmission units (MTU) is supported. You can enable up to 4352 bytes | RANGE: [256 , 4352] DEFAULT: 1492 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 63 |
| net | isis:Net (string:Basic) |
Net | A sequence of characters |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| contextId | scalar:Uint32 |
Context ID | RANGE: [0, 4294967295] |
| fastCsnps | scalar:Uint32 |
The total number of fast flooded CSNP packets sent. | RANGE: [0, 4294967295] |
| fastLsps | scalar:Uint32 |
The total number of fast flooded LSP packets sent. | RANGE: [0, 4294967295] |
| lspPurged | scalar:Uint32 |
Total LSP Purged | RANGE: [0, 4294967295] |
| lspRefreshed | scalar:Uint32 |
Total LSP Refreshed | RANGE: [0, 4294967295] |
| lspSourced | scalar:Uint32 |
Total LSP Sourced | RANGE: [0, 4294967295] |
| mtsError | scalar:Bool |
SELECTION: true or false | |
| operSt | isis:OperSt (scalar:Enum8) |
The IS-IS domain operational state. This indicates if the current operational state of the IS-IS domain is up, down, or initializing. | SELECTION: 0 - unknown 1 - initializing 2 - ok 3 - failed |
| seqWrapError | scalar:Bool |
Sequence Wrap Error | SELECTION: true or false |
| spfCalculated | scalar:Uint32 |
Total SPF Calculations | RANGE: [0, 4294967295] |
| uribError | scalar:Bool |
SELECTION: true or false |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| areaId | isis:AreaId (scalar:UByte) |
The IS-IS domain area ID. This ID is designated by the system. | RANGE: [0 , 255] DEFAULT: 0 |
| deletedViaCLI | scalar:Bool |
Was Dom deleted via CLI | SELECTION: true or false |
| maxEcmp | isis:Ecmp (scalar:UByte) |
The maximum Equal Cost Multiple Paths (ECMP) value. You can configure the ECMP feature to support up to 16 equal-cost paths in the IS-IS route table and the unicast RIB. | RANGE: [1 , 64] DEFAULT: 8 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| mode | isis:Mode (scalar:Enum8) |
Mode | SELECTION: 1 - fabric 2 - external DEFAULT: fabric |
| nSel | isis:NSEL (scalar:Enum8) |
The IS-IS domain network selector. The selector is a controller that determines the domain network selected by the system. | SELECTION: 0 - ip DEFAULT: ip |
| status | mo:ModificationStatus (scalar:Bitmask32) |
Modification status | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |
| sysId | isis:SysId (address:MAC) |
Specifies the Domain system ID. | Value must match MM:MM:MM:SS:SS:SS format |