udld:PhysIf
Unidirectional Link Detection Interface
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| aggressive | udld:AdminSt (scalar:Enum8) |
Interface Aggressive Mode | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| biDirDetect | udld:PortEnable (scalar:Enum8) |
Bidirectional Detection Enabled | SELECTION: 0 - port-enabled 1 - port-fiber-disabled 2 - port-default DEFAULT: port-default |
| descr | naming:Descr1024 (string:Basic) |
Tunnel Description | MAX SIZE: 254 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 127 DEFAULT: bgp-PeerAf |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| biDirDetectState | udld:NeighborState (scalar:Enum8) |
Bidirectional Detection State | SELECTION: 0 - unknown 1 - unidir-detected 2 - bidir-detected 3 - tx-rx-loop 4 - mismatch 5 - empty-echo DEFAULT: unknown |
| currBiDirState | udld:NeighborState (scalar:Enum8) |
Current Bidirectional State | SELECTION: 0 - unknown 1 - unidir-detected 2 - bidir-detected 3 - tx-rx-loop 4 - mismatch 5 - empty-echo DEFAULT: unknown |
| deepPktInspCnt | scalar:Uint64 |
Deep Packet Inspections | RANGE: [0, 18446744073709551615] DEFAULT: 0 |
| error | scalar:Uint64 |
failure code | RANGE: [0, 18446744073709551615] DEFAULT: 0 |
| fiber | udld:OperSt (scalar:Enum8) |
Fiber Port | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| fsmState | udld:FsmState (scalar:Enum8) |
FSM State | SELECTION: 0 - link-up 1 - link-down 2 - detection 3 - advertisement 4 - disable-port 5 - disabled-link-up 6 - disabled-link-down 7 - init 8 - extended-detection DEFAULT: init |
| linkState | udld:OperSt (scalar:Enum8) |
Link State | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| pktDropCnt | scalar:Uint64 |
Packet Drops | RANGE: [0, 18446744073709551615] DEFAULT: 0 |
| pktMismatchCnt | scalar:Uint64 |
Packet Mismatches | RANGE: [0, 18446744073709551615] DEFAULT: 0 |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
Modification status | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |