ospfv3:If
OSPF Interface
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | nw:IfAdminSt (nw:AdminSt) |
The administrative state of the object or policy. | SELECTION: 1 - enabled 2 - disabled |
| advertiseSecondaries | scalar:Bool |
Advertise secondary IP addresses | SELECTION: true or false DEFAULT: true |
| area | ospf:AreaId (address:IPv4) |
Area ID | RANGE: [0 , 4294967295] DEFAULT: 1 |
| bfdCtrl | ospf:BfdControl (scalar:Enum8) |
BFD Control | SELECTION: 0 - unspecified 1 - enabled 2 - disabled DEFAULT: unspecified |
| ctrl | ospf:IfControl (scalar:Bitmask8) |
Controls | SELECTION: 0 - unspecified 1 - mtu-ignore 2 - advert-subnet DEFAULT: unspecified |
| descr | naming:Descr1024 (string:Basic) |
Tunnel Description | MAX SIZE: 254 |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 127 DEFAULT: bgp-PeerAf |
| nwT | ospf:NwT (scalar:Enum8) |
Network Type | SELECTION: 0 - unspecified 1 - p2p 2 - bcast DEFAULT: unspecified |
| passiveCtrl | ospf:PassiveControl (scalar:Enum8) |
Passive Interface Control | SELECTION: 0 - unspecified 1 - enabled 2 - disabled DEFAULT: unspecified |
| prio | ospf:DesigPrio (scalar:UByte) |
Priority | RANGE: [0 , 255] DEFAULT: 1 |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| addr | address:Ip |
Address | Value must match ipv4 or ipv6 known format |
| bdr | address:Ip |
BDR Ip Address | Value must match ipv4 or ipv6 known format |
| bdrId | ip:RtrId (address:IPv4) |
BDR Id | Value must match ipv4 format |
| dr | address:Ip |
DR Ip Address | Value must match ipv4 or ipv6 known format |
| drId | ip:RtrId (address:IPv4) |
DR Id | Value must match ipv4 format |
| failStQual | ospf:FailStQual (scalar:Bitmask64) |
Failed State Qualifier | SELECTION: 0 - unspecified 1 - init-error 2 - ha-error 4 - proto-error 8 - mem-error 16 - ipc-error 32 - rib-error DEFAULT: unspecified |
| flags | ospf:IfFlags (scalar:Bitmask32) |
Flags | SELECTION: 0 - unspecified 1 - admin-up 2 - proto-up DEFAULT: unspecified |
| lsaCksumSum | ospf:LsaCksumSum (scalar:Uint32) |
LSA Checksum Sum | RANGE: [0, 4294967295] |
| operCost | ospf:IfCost (scalar:Uint16) |
Operational Cost | RANGE: [0 , 65535] DEFAULT: unspecified |
| operDeadIntvl | ospf:DeadIntvl (scalar:Uint16) |
Operational Dead Interval | RANGE: [0 , 65535] DEFAULT: unspecified |
| operSt | ospf:IfOperSt (scalar:Enum8) |
Operational State | SELECTION: 0 - unknown 1 - down 2 - loopback 3 - waiting 4 - p2p 5 - dr 6 - bdr 7 - dr-other DEFAULT: down |
| type | ospf:IfType (scalar:Enum8) |
Type | SELECTION: 0 - unspecified 1 - loopback 2 - p2p 3 - p2mp 4 - nbma 5 - bcast DEFAULT: unspecified |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
Modification status | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |