Properties Summary |
Defined in: dpp:Policer |
dpp:Burst
scalar:Uint64
|
be (dpp:Policer:be)
Excessive burst size (2R3C policer only)
|
dpp:BurstUnit
scalar:Enum8
|
beUnit (dpp:Policer:beUnit)
Excessive Busrt unit - none, Kilo, Mega, Giga, ms, us
|
dpp:Burst
scalar:Uint64
|
burst (dpp:Policer:burst)
Committed burst size, number of packets to absorb during a burst
|
dpp:BurstUnit
scalar:Enum8
|
burstUnit (dpp:Policer:burstUnit)
Busrt unit - none, Kilo, Mega, Giga, ms, us
|
dpp:ConformRateAction
scalar:Enum8
|
conformAction (dpp:Policer:conformAction)
Conform action
|
dpp:CosMarkingValue
scalar:Uint16
|
conformMarkCos (dpp:Policer:conformMarkCos)
Conform Mark cos
|
dpp:DscpMarkingValue
scalar:Uint16
|
conformMarkDscp (dpp:Policer:conformMarkDscp)
Conform Mark Dscp
|
dpp:ExceedRateAction
scalar:Enum8
|
exceedAction (dpp:Policer:exceedAction)
Exceed action
|
dpp:CosMarkingValue
scalar:Uint16
|
exceedMarkCos (dpp:Policer:exceedMarkCos)
Exceed Mark cos
|
dpp:DscpMarkingValue
scalar:Uint16
|
exceedMarkDscp (dpp:Policer:exceedMarkDscp)
Exceed Mark Dscp
|
dpp:Mode
scalar:Enum8
|
mode (dpp:Policer:mode)
Policer mode - bits or packet policer
|
dpp:Rate
scalar:Uint64
|
pir (dpp:Policer:pir)
Peak rate (pir) (2R3C policer only)
|
dpp:RateUnit
scalar:Enum8
|
pirUnit (dpp:Policer:pirUnit)
Peak Rate unit - none, Kilo, Mega, Giga
|
dpp:Rate
scalar:Uint64
|
rate (dpp:Policer:rate)
Allowed rate, committed rate at which the packets are allowed into the system
|
dpp:RateUnit
scalar:Enum8
|
rateUnit (dpp:Policer:rateUnit)
Rate unit - none, Kilo, Mega, Giga
|
dpp:Type
scalar:Enum8
|
type (dpp:Policer:type)
Policer type
|
dpp:ViolateRateAction
scalar:Enum8
|
violateAction (dpp:Policer:violateAction)
Violate action
|
dpp:CosMarkingValue
scalar:Uint16
|
violateMarkCos (dpp:Policer:violateMarkCos)
Violate Mark cos
|
dpp:DscpMarkingValue
scalar:Uint16
|
violateMarkDscp (dpp:Policer:violateMarkDscp)
Violate Mark Dscp
|
Defined in: mo:Resolvable |
mo:Owner
scalar:Enum8
|
lcOwn (mo:Resolvable:lcOwn)
A value that indicates how this object was created. For internal use only.
|
be
Type: dpp:Burst
Primitive Type: scalar:Uint64
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Excessive burst size (2R3C policer only)
| |
Constants |
unspecified |
0xffffffffffffffffull |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffffffffffffffffull) |
Unspecified |
NO COMMENTS
|
|
beUnit
Type: dpp:BurstUnit
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Excessive Busrt unit - none, Kilo, Mega, Giga, ms, us
| |
Constants |
unspecified |
0 |
Bytes/Packets |
NO COMMENTS
|
kilo |
1 |
Kilo Bytes/Packets |
NO COMMENTS
|
mega |
2 |
Mega Bytes/Packets |
NO COMMENTS
|
giga |
3 |
Giga Bytes/Packets |
NO COMMENTS
|
msec |
4 |
Milli Seconds |
NO COMMENTS
|
usec |
5 |
Micro Seconds |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bytes/Packets |
NO COMMENTS
|
|
burst
Type: dpp:Burst
Primitive Type: scalar:Uint64
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Committed burst size, number of packets to absorb during a burst
| |
Constants |
unspecified |
0xffffffffffffffffull |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffffffffffffffffull) |
Unspecified |
NO COMMENTS
|
|
burstUnit
Type: dpp:BurstUnit
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Busrt unit - none, Kilo, Mega, Giga, ms, us
| |
Constants |
unspecified |
0 |
Bytes/Packets |
NO COMMENTS
|
kilo |
1 |
Kilo Bytes/Packets |
NO COMMENTS
|
mega |
2 |
Mega Bytes/Packets |
NO COMMENTS
|
giga |
3 |
Giga Bytes/Packets |
NO COMMENTS
|
msec |
4 |
Milli Seconds |
NO COMMENTS
|
usec |
5 |
Micro Seconds |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bytes/Packets |
NO COMMENTS
|
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
conformAction
Type: dpp:ConformRateAction
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Conform action
| |
Constants |
transmit |
1 |
Transmit |
NO COMMENTS
|
drop |
2 |
Drop |
NO COMMENTS
|
mark |
3 |
Mark |
NO COMMENTS
|
DEFAULT |
transmit(1) |
Transmit |
NO COMMENTS
|
|
conformMarkCos
Type: dpp:CosMarkingValue
Primitive Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Conform Mark cos
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
conformMarkDscp
Type: dpp:DscpMarkingValue
Primitive Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Conform Mark Dscp
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
descr
Type: naming:Descr
Primitive Type: string:Basic
Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Comments:
-
Specifies a control instrumentation description.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
exceedAction
Type: dpp:ExceedRateAction
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Exceed action
| |
Constants |
transmit |
1 |
Transmit |
NO COMMENTS
|
drop |
2 |
Drop |
NO COMMENTS
|
mark |
3 |
Mark |
NO COMMENTS
|
DEFAULT |
drop(2) |
Drop |
NO COMMENTS
|
|
exceedMarkCos
Type: dpp:CosMarkingValue
Primitive Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Exceed Mark cos
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
exceedMarkDscp
Type: dpp:DscpMarkingValue
Primitive Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Exceed Mark Dscp
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
lcOwn
Type: mo:Owner
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
A value that indicates how this object was created. For internal use only.
| |
Constants |
local |
0 |
Local |
NO COMMENTS
|
policy |
1 |
Policy |
NO COMMENTS
|
replica |
2 |
Replica |
NO COMMENTS
|
resolveOnBehalf |
3 |
ResolvedOnBehalf |
NO COMMENTS
|
implicit |
4 |
Implicit |
NO COMMENTS
|
DEFAULT |
local(0) |
Local |
NO COMMENTS
|
|
modTs
Type: mo:TStamp
Primitive Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The time when this object was last modified.
| |
Constants |
never |
0ull |
never |
NO COMMENTS
|
DEFAULT |
never(0ull) |
never |
NO COMMENTS
|
|
mode
Type: dpp:Mode
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Policer mode - bits or packet policer
| |
Constants |
bit |
1 |
Bit policer |
NO COMMENTS
|
packet |
2 |
Packet Policer |
NO COMMENTS
|
DEFAULT |
bit(1) |
Bit policer |
NO COMMENTS
|
|
monPolDn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Monitoring policy attached to this observable object
name
Type: naming:Name
Primitive Type: string:Basic
Overrides:pol:Obj:name | naming:NamedObject:name
Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular
Comments:
-
nameAlias
Type: naming:NameAlias
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Comments:
-
NO COMMENTS
operSt
Type: dpp:OperSt
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
operational state
| |
Constants |
enabled |
1 |
enabled |
Operational state is Enabled
|
disabled |
2 |
disabled |
Operational state is Disabled
|
DEFAULT |
disabled(2) |
disabled |
Operational state is Disabled
|
|
operStQual
Type: dpp:OperStQual
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
Rule operational state disabled reason
| |
Constants |
unspecified |
0 |
Unspecified |
Unspecified
|
hwprog-fail |
1 |
Hardware Programming Failed |
Hardware programming failed
|
max-if-policer-limit-reached |
2 |
Max interface policer limit reached |
Max policer limit reached
|
unsupported-interface-type |
3 |
Policer is not supported on this type of interface |
Unsupported interface type
|
transient-error |
4 |
A transient error occurred, auto-retry will be attempted |
Transient error, where retry might work
|
link-is-down |
5 |
Policer is not enabled as the link is down |
Link down
|
policer-mode-unsupported |
6 |
Specified policer mode is not supported on this platform |
Unsupported mode - packet mode not supported on sug
|
policer-type-unsupported |
7 |
Specified policer type is not supported on this platform |
Unsupported type - 2R3C type not supported on sug
|
policer-action-unsupported |
8 |
Specified policer action is not supported on this platform |
Unsupported action - not all actions are supported on sug
|
l3-policer-active |
9 |
L3 Policer is already active |
L3 Policer already applied
|
DEFAULT |
unspecified(0) |
Unspecified |
Unspecified
|
|
pir
Type: dpp:Rate
Primitive Type: scalar:Uint64
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Peak rate (pir) (2R3C policer only)
pirUnit
Type: dpp:RateUnit
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Peak Rate unit - none, Kilo, Mega, Giga
| |
Constants |
unspecified |
0 |
Bits/Packets per second |
NO COMMENTS
|
kilo |
1 |
Kilo Bits/Packets per second |
NO COMMENTS
|
mega |
2 |
Mega Bits/Packets per second |
NO COMMENTS
|
giga |
3 |
Giga Bits/Packets per second |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bits/Packets per second |
NO COMMENTS
|
|
qosmCfgFailedBmp
Type: scalar:Bitmask64
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
| |
Constants |
dpp:ClasslcOwn_failed_flag |
-9223372036854775808ull |
--- |
NO COMMENTS
|
dpp:ClassexceedAction_failed_flag |
1024ull |
--- |
NO COMMENTS
|
dpp:ClassviolateMarkCos_failed_flag |
1048576ull |
--- |
NO COMMENTS
|
dpp:ClassconformAction_failed_flag |
128ull |
--- |
NO COMMENTS
|
dpp:ClassrateUnit_failed_flag |
131072ull |
--- |
NO COMMENTS
|
dpp:Classpir_failed_flag |
16384ull |
--- |
NO COMMENTS
|
dpp:ClassbeUnit_failed_flag |
16ull |
--- |
NO COMMENTS
|
dpp:Classname_failed_flag |
1ull |
--- |
NO COMMENTS
|
dpp:ClassexceedMarkCos_failed_flag |
2048ull |
--- |
NO COMMENTS
|
dpp:ClassviolateMarkDscp_failed_flag |
2097152ull |
--- |
NO COMMENTS
|
dpp:ClassmodTs_failed_flag |
2305843009213693952ull |
--- |
NO COMMENTS
|
dpp:ClassconformMarkCos_failed_flag |
256ull |
--- |
NO COMMENTS
|
dpp:Classtype_failed_flag |
262144ull |
--- |
NO COMMENTS
|
dpp:ClassnameAlias_failed_flag |
2ull |
--- |
NO COMMENTS
|
dpp:ClasspirUnit_failed_flag |
32768ull |
--- |
NO COMMENTS
|
dpp:Classburst_failed_flag |
32ull |
--- |
NO COMMENTS
|
dpp:ClassexceedMarkDscp_failed_flag |
4096ull |
--- |
NO COMMENTS
|
dpp:ClassmonPolDn_failed_flag |
4194304ull |
--- |
NO COMMENTS
|
dpp:Classdescr_failed_flag |
4ull |
--- |
NO COMMENTS
|
dpp:ClassconformMarkDscp_failed_flag |
512ull |
--- |
NO COMMENTS
|
dpp:ClassviolateAction_failed_flag |
524288ull |
--- |
NO COMMENTS
|
dpp:ClassburstUnit_failed_flag |
64ull |
--- |
NO COMMENTS
|
dpp:Classrate_failed_flag |
65536ull |
--- |
NO COMMENTS
|
dpp:Classmode_failed_flag |
8192ull |
--- |
NO COMMENTS
|
dpp:Classbe_failed_flag |
8ull |
--- |
NO COMMENTS
|
DEFAULT |
0 |
--- |
NO COMMENTS
|
|
qosmCfgFailedTs
Type: scalar:Time
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
qosmCfgState
Type: scalar:UByte
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
rate
Type: dpp:Rate
Primitive Type: scalar:Uint64
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Allowed rate, committed rate at which the packets are allowed into the system
rateUnit
Type: dpp:RateUnit
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Rate unit - none, Kilo, Mega, Giga
| |
Constants |
unspecified |
0 |
Bits/Packets per second |
NO COMMENTS
|
kilo |
1 |
Kilo Bits/Packets per second |
NO COMMENTS
|
mega |
2 |
Mega Bits/Packets per second |
NO COMMENTS
|
giga |
3 |
Giga Bits/Packets per second |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bits/Packets per second |
NO COMMENTS
|
|
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|
type
Type: dpp:Type
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Policer type
| |
Constants |
1R2C |
1 |
1 Rate 2 Color |
NO COMMENTS
|
2R3C |
2 |
2 Rate 3 Color |
NO COMMENTS
|
DEFAULT |
1R2C(1) |
1 Rate 2 Color |
NO COMMENTS
|
|
violateAction
Type: dpp:ViolateRateAction
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Violate action
| |
Constants |
transmit |
1 |
Transmit |
NO COMMENTS
|
drop |
2 |
Drop |
NO COMMENTS
|
mark |
3 |
Mark |
NO COMMENTS
|
DEFAULT |
drop(2) |
Drop |
NO COMMENTS
|
|
violateMarkCos
Type: dpp:CosMarkingValue
Primitive Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Violate Mark cos
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
violateMarkDscp
Type: dpp:DscpMarkingValue
Primitive Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
Violate Mark Dscp
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|