Class l3:Ctx (CONCRETE)

Class ID:3750
Class Label: Context
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-connectivity-l2, access-connectivity-l3, admin, fabric-connectivity-l3, fabric-protocol-l3, tenant-connectivity-l3, tenant-ext-connectivity-l3, tenant-security]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: EPG
Semantic Scope Evaluation Rule: Explicit
Monitoring Policy Source: Explicit
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: true ]

RN FORMAT: ctx-{[encap]}

    [1] PREFIX=ctx- PROPERTY = encap




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/ctx-{[encap]}

[1] sys/ctx-{[encap]}

                

Diagram

Super Mo: l3:Dom, Container Mos: top:System (deletable:no), Contained Mos: actrl:PfxEntry, epm:Db, fmcast:Grp, l2:BD, l2:EpRetPol, l3:CtxExtn, l3:EncRtdIf, l3:FwdCtx, l3:IpEp, l3:LbRtdIf, l3:RtdIf, mgmt:RtdMgmtIf, svccopy:SvcDb, Relations From: fv:EPgDef, actrl:Scope, dbgexp:ExportP, Relations To: fv:AREpP, Relations: l3:RsCtxToEpP, l3:RtEPgDefToL3Dom, l3:RtTenConn, l3:RtUserCtx,

Containers Hierarchies

top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...          ├ l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...    ├ l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.

Contained Hierarchy

l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.  ├ actrl:PfxEntry The prefix list entry definition.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.  ├ epm:Db     ├ epm:DTEp  Tunnel endpoints discovered through epm    ├ epm:IpEp       ├ epm:RtMacEpToIpEpAtt     ├ epm:MacEp       ├ epm:RsMacEpToIpEpAtt   ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.  ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.  ├ fmcast:Grp A multicast group entity.  ├ health:Inst A base class for a health score instance.(Switch only)  ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant’s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.    ├ epm:Db       ├ epm:DTEp  Tunnel endpoints discovered through epm      ├ epm:IpEp         ├ epm:RtMacEpToIpEpAtt       ├ epm:MacEp         ├ epm:RsMacEpToIpEpAtt     ├ epm:DynEpgPolicyTrig     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ fmcast:Grp A multicast group entity.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:EpCtrl     ├ l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l2:EpScanInfo     ├ l2:MacCktEp  Mac EP policy      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:MacCktCons         ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:RsMacBaseEppAtt       ├ l2:RsMacEppAtt     ├ l2:MpBd  Layer2 Bridge-domain more properties used in multipod case Not added to BD mo because in single pod case these new added properties are not used.    ├ l2:RsExtBD A source relation to the interface connectivity. This is an internal object.    ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:LPort The holder of nxosmock-specific information of the port.      ├ l2:PortSecurityPolDef  Port Security Policy        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.    ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.    ├ l3:IpCktEp  IP Circuit Endpoint      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsIpEppAtt     ├ svi:If A routed VLAN interface.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ nw:RtPathToIf A target relation to the interface information.      ├ rmon:Dot1d The Dot1d statistics.      ├ rmon:Dot3Stats The Dot3 statistics.      ├ rmon:EtherStats The Ethernet statistics.      ├ rmon:IfHCIn The interface high capacity input statistics.      ├ rmon:IfHCOut The interface high capacity output statistics.      ├ rmon:IfIn The interface input statistics.      ├ rmon:IfOut The interface output statistics.      ├ rmon:IfStorm       ├ rmon:IpIn The IPV4 input statistics.      ├ rmon:Ipv6IfStats The IPV6 interface statistics.    ├ vlan:CktEp A VLAN object created for an endpoint group with an 802.1q encap.      ├ epm:Db         ├ epm:DTEp  Tunnel endpoints discovered through epm        ├ epm:IpEp           ├ epm:RtMacEpToIpEpAtt         ├ epm:MacEp           ├ epm:RsMacEpToIpEpAtt       ├ epm:DynEpgPolicyTrig       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:EpScanInfo       ├ l2:MacEp A static Mac endpoint.        ├ l2:RtEpDefRefToL2MacEp       ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:LPort The holder of nxosmock-specific information of the port.        ├ l2:PortSecurityPolDef  Port Security Policy          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.      ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.      ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.      ├ vlan:RsVlanEppAtt A source relation to an abstract representation of the resolvable endpoint profile.      ├ vlan:RtSrcEncap A target relation to the VLAN object created for an endpoint group with an 802.1q encap.      ├ vlan:RtToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD    ├ vsan:CktEp  Vsan represents a generic CktEp      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.      ├ vsan:RsVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif        ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ vxlan:CktEp A VXLAN circuit.      ├ epm:Db         ├ epm:DTEp  Tunnel endpoints discovered through epm        ├ epm:IpEp           ├ epm:RtMacEpToIpEpAtt         ├ epm:MacEp           ├ epm:RsMacEpToIpEpAtt       ├ epm:DynEpgPolicyTrig       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:EpScanInfo       ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:LPort The holder of nxosmock-specific information of the port.        ├ l2:PortSecurityPolDef  Port Security Policy          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.      ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.      ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.      ├ vxlan:RsVxlanEppAtt A source relation to an abstract representation of a resolvable endpoint profile.  ├ l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ l3:CtxExtn  Tenant context extension in a Multi pod case    ├ l2:BDExtn  Layer2 Bridge-domain extension in a different pod      ├ vlan:CktEpExtn  802.1q Vlan cirucuit endpoint extension      ├ vxlan:CktEpExtn  802.1q Vxlan cirucuit endpoint extension  ├ l3:EncRtdIf The routed interface corresponds to a sub-interface in Cisco’s routing terminology. A sub-interface is a logical L3 interface created on an underlying physical L3 port (the parent interface). Each sub-interface is associated with an 802.1Q VLAN tag. The traffic that comes on the parent interface with that tag is considered for that sub-interface. The existence of a routed interface under a VRF or infra VRF also implies that the interface belo...    ├ ethpm:EncRtdIf Subinterface information holder    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3:RsEncPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.    ├ l3:RsL3If The source of the sub-interface/l3-interface.    ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.    ├ nw:RtPathToIf A target relation to the interface information.    ├ rmon:Dot1d The Dot1d statistics.    ├ rmon:Dot3Stats The Dot3 statistics.    ├ rmon:EtherStats The Ethernet statistics.    ├ rmon:IfHCIn The interface high capacity input statistics.    ├ rmon:IfHCOut The interface high capacity output statistics.    ├ rmon:IfIn The interface input statistics.    ├ rmon:IfOut The interface output statistics.    ├ rmon:IfStorm     ├ rmon:IpIn The IPV4 input statistics.    ├ rmon:Ipv6IfStats The IPV6 interface statistics.  ├ l3:FwdCtx     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ l3:IpEp  Static IP end point    ├ l3:Cons  Represents a consumer of a resource.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ l3:LbRtdIf The routed loopback interface.    ├ ethpm:LbRtdIf Loopback interface information holder    ├ l3:RsL3If The source of the sub-interface/l3-interface.    ├ l3:RsLbIfToLocale A loopback created for the router ID. This relation is un-enforced because the code tries to access the real-time monitoring tool.      ├ l3:Cons  Represents a consumer of a resource.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l3:RsLbIfToOutRef     ├ l3:RsProtLbIf A loopback created for protection groups.    ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.    ├ nw:RtPathToIf A target relation to the interface information.  ├ l3:RsCtxToEpP A source relation to an abstract representation of the resolvable endpoint profile. This is an internal object.  ├ l3:RtEPgDefToL3Dom A target relation to the layer 3 domain (VRF).  ├ l3:RtTenConn A target relation to the tenant context. This is an internal object.  ├ l3:RtUserCtx A target relation to tenant context information. The tenant context is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.  ├ l3:RtdIf A target relation to the routed concrete interface. This corresponds to a physical L3 interface. The existence of a routed concrete interface under a VRF or infra VRF also implies that interface belongs to that VRF. An L3 interface can belong to only one VRF at a time.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3:RsL3If The source of the sub-interface/l3-interface.    ├ l3:RsPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.    ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.    ├ nw:RtPathToIf A target relation to the interface information.  ├ mgmt:RtdMgmtIf Routed management interface    ├ l3:RsL3If The source of the sub-interface/l3-interface.    ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.    ├ mgmt:RsRtdMgmtConf A source relation to the management interface.    ├ nw:RtPathToIf A target relation to the interface information.  ├ svccopy:SvcDb  Abstraction of copy service database    ├ svccopy:DTEp  Tunnel endpoints learnt through svc dest

Inheritance

nw:Item Ignore.  ├ nw:Conn A connection abstraction.    ├ nw:GEp A group endpoint abstraction.      ├ nw:FwDom A data plane domain abstraction. This object represents a domain within a forwarding plane instance. For example, a bridge domain.        ├ l3:Dom The Layer 3 Domain (VRF).          ├ l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.

                l3:Ctx:creation__l3_Ctx

                l3:Ctx:creation__l3_Ctx_auto

                l3:Ctx:modification__l3_Ctx

                l3:Ctx:modification__l3_Ctx_auto

                l3:Ctx:deletion__l3_Ctx

                l3:Ctx:deletion__l3_Ctx_auto

                

                l3:Dom:l3vmCfgCtrl

                

adminState

Type: l3:VrfAdminState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

vrf Admin State

bgpRd

Type: l3:BgpRdBytes
Primitive Type: base:Uint8Array8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

bgp route distinguisher

bgpRdDisp

Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction

Delete or ignore. For internal use only.

createTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

vrf creation time

ctxPKey

Type: fv:PrimKey
Primitive Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

DN of the fv:Ctx to which the fault will get delegated

dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn

A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

encap

Type: base:Encap

Overrides:l3:Dom:encap

Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular

The Layer 3 context encapsulation.

gsdbCtx

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

gsdb context

hwResourceId

Type: l3:HwRsrcIdT
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

BD hardware resource identifier (allocated by eltm)

id

Type: l3:VrfId
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

vrf id

l3vmCfgFailedBmp

Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

l3vmCfgFailedTs

Type: scalar:Time

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

l3vmCfgState

Type: scalar:UByte

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

lastChgdTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

last state change time

lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

A value that indicates how this object was created. For internal use only.

mgmtPcTag

Type: actrl:PcTag
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The Layer 3 local management class ID.

modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The time when this object was last modified.

monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The monitoring policy for the Layer 3 context object.

name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:FwDom:name  |  nw:Conn:name

Units: null
Encrypted: false
Access: create
Category: TopLevelRegular

vrf name

oldOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

old oper state reason

operStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

oper state reason

operState

Type: l3:VrfOperState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The VRF operational state.

oui

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

vrf oui

pcEnfDir

Type: l3:PcEnfDir
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

It represents Ingress/Egress policy of traffic on this context

pcEnfPref

Type: fv:PcEnfPref
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The preferred policy control.

pcTag

Type: actrl:PcTag
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The Layer 3 classId for the Multicast traffic terminating on the context.

pending

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

pending operation status

prtclBmp

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

protocols in a vrf

resourceId

Type: l3:VrfId
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn

Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

scope

Type: actrl:ScopeId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Scope of the context. It identifies the classId pool and all the epg/bd classIds belonging to this context needs to be allocated from this pool

secLbl

Type: actrl:SecLbl
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus

The upgrade status. This property is for internal use only.

type

Type: l3:CtxT
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The Layer 3 context type.

v4TibId

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv4 table id

v4TibName

Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv4 table name

v4TibOldOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv4 table old oper state reason

v4TibOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv4 table oper state reason

v4TibOperState

Type: l3:VrfOperState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv4 table operational state.

v4TibPending

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv4 table pending operation status

v4TibValid

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv4 table valid

v6TibId

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv6 table id

v6TibName

Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv6 table name

v6TibOldOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv6 table old oper state reason

v6TibOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv6 table oper state reason

v6TibOperState

Type: l3:VrfOperState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv6 table Oper State

v6TibPending

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv6 table pending operation status

v6TibValid

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

ipv6 table valid

vpnId

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

vrf vpnId