Class l3:Inst (CONCRETE)

Class ID:3753
Class Label: Overlay Instance
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-connectivity-l2, access-connectivity-l3, admin, fabric-connectivity-l3, fabric-connectivity-util, fabric-protocol-l3, tenant-connectivity-l3, tenant-ext-connectivity-l3]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: EPG
Semantic Scope Evaluation Rule: Explicit
Monitoring Policy Source: Explicit
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: false ]

The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.

Naming Rules
RN FORMAT: inst-{name}

    [1] PREFIX=inst- PROPERTY = name




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/inst-{name}

[1] sys/inst-{name}

                


Diagram

Super Mo: l3:Dom,
Container Mos: top:System (deletable:no),
Contained Mos: dci:LocalSite, dci:RemoteSite, epm:Db, fmcast:Tree, l2:BD, l3:EncRtdIf, l3:LbRtdIf, l3:RtdIf, mgmt:RtdMgmtIf, mp:PodExtn, svccopy:SvcDb, topoctrl:ShardChP, tunnel:CtrlPfxEntry, tunnel:Ctx, tunnel:PfxEntry,
Relations From: fv:EPgDef,
Relations: l3:RtEPgDefToL3Dom,


Containers Hierarchies
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] fabric:Topology The root for IFC topology.
 
 ├
[V] fabric:Pod A pod.
 
 
 ├
[V] fabric:Node The root node for the APIC.
 
 
 
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 
 
 
 ├
[V] l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 ├
[V] l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.


Contained Hierarchy
[V] l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.
 ├
[V] dci:LocalSite  local Site
 
 ├
[V] l3:LocalCtxSubstitute  multisite l3 local context
 
 
 ├
[V] l2:LocalBdSubstitute  Multisite local bd/Pctag
 
 
 
 ├
[V] l2:RtToLocalBdSubstitute 
 
 
 ├
[V] l2:LocalPcTagSubstitute 
 
 
 
 ├
[V] l2:RtToLocalPcTagSubstitute 
 
 
 ├
[V] l3:RtToLocalCtxSubstitute 
 ├
[V] dci:RemoteSite  Remote Site
 
 ├
[V] dci:AnycastExtn  multipod under remote site
 
 ├
[V] l3:RemoteCtxSubstitute  multisite l3 remote context
 
 
 ├
[V] l2:RemoteBdSubstitute  Multisite Remote bd/Pctag
 
 
 
 ├
[V] l2:RsToLocalBdSubstitute 
 
 
 ├
[V] l2:RemotePcTagSubstitute 
 
 
 
 ├
[V] l2:RsToLocalPcTagSubstitute 
 
 
 ├
[V] l3:RsToLocalCtxSubstitute 
 ├
[V] epm:Db 
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 ├
[V] epm:IpEp 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 ├
[V] epm:MacEp 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 ├
[V] fmcast:Tree A distribution tree used to forward multi-destination (flood and Multicast) traffic over the fabric.
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant’s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
 
 ├
[V] epm:Db 
 
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 
 ├
[V] epm:IpEp 
 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 
 ├
[V] epm:MacEp 
 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 
 ├
[V] epm:DynEpgPolicyTrig 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 ├
[V] fmcast:Grp A multicast group entity.
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:EpCtrl 
 
 ├
[V] l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] l2:EpScanInfo 
 
 ├
[V] l2:MacCktEp  Mac EP policy
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:MacCktCons 
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] l2:RsMacBaseEppAtt 
 
 
 ├
[V] l2:RsMacEppAtt 
 
 ├
[V] l2:MpBd  Layer2 Bridge-domain more properties used in multipod case Not added to BD mo because in single pod case these new added properties are not used.
 
 ├
[V] l2:RsExtBD A source relation to the interface connectivity. This is an internal object.
 
 ├
[V] l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] l2:LPort The holder of nxosmock-specific information of the port.
 
 
 ├
[V] l2:PortSecurityPolDef  Port Security Policy
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 ├
[V] l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.
 
 ├
[V] l3:IpCktEp  IP Circuit Endpoint
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l3:RsIpEppAtt 
 
 ├
[V] svi:If A routed VLAN interface.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l3:RsL3If The source of the sub-interface/l3-interface.
 
 
 ├
[V] l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.
 
 
 ├
[V] nw:RtPathToIf A target relation to the interface information.
 
 
 ├
[V] rmon:Dot1d The Dot1d statistics.
 
 
 ├
[V] rmon:Dot3Stats The Dot3 statistics.
 
 
 ├
[V] rmon:EtherStats The Ethernet statistics.
 
 
 ├
[V] rmon:IfHCIn The interface high capacity input statistics.
 
 
 ├
[V] rmon:IfHCOut The interface high capacity output statistics.
 
 
 ├
[V] rmon:IfIn The interface input statistics.
 
 
 ├
[V] rmon:IfOut The interface output statistics.
 
 
 ├
[V] rmon:IfStorm 
 
 
 ├
[V] rmon:IpIn The IPV4 input statistics.
 
 
 ├
[V] rmon:Ipv6IfStats The IPV6 interface statistics.
 
 ├
[V] vlan:CktEp A VLAN object created for an endpoint group with an 802.1q encap.
 
 
 ├
[V] epm:Db 
 
 
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 
 
 ├
[V] epm:IpEp 
 
 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 
 
 ├
[V] epm:MacEp 
 
 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 
 
 ├
[V] epm:DynEpgPolicyTrig 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:EpScanInfo 
 
 
 ├
[V] l2:MacEp A static Mac endpoint.
 
 
 
 ├
[V] l2:RtEpDefRefToL2MacEp 
 
 
 ├
[V] l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] l2:LPort The holder of nxosmock-specific information of the port.
 
 
 
 ├
[V] l2:PortSecurityPolDef  Port Security Policy
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 
 ├
[V] l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.
 
 
 ├
[V] l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.
 
 
 ├
[V] vlan:RsVlanEppAtt A source relation to an abstract representation of the resolvable endpoint profile.
 
 
 ├
[V] vlan:RtSrcEncap A target relation to the VLAN object created for an endpoint group with an 802.1q encap.
 
 
 ├
[V] vlan:RtToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD
 
 ├
[V] vsan:CktEp  Vsan represents a generic CktEp
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 
 ├
[V] vsan:RsVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif
 
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] vxlan:CktEp A VXLAN circuit.
 
 
 ├
[V] epm:Db 
 
 
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 
 
 ├
[V] epm:IpEp 
 
 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 
 
 ├
[V] epm:MacEp 
 
 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 
 
 ├
[V] epm:DynEpgPolicyTrig 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:EpScanInfo 
 
 
 ├
[V] l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] l2:LPort The holder of nxosmock-specific information of the port.
 
 
 
 ├
[V] l2:PortSecurityPolDef  Port Security Policy
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 
 ├
[V] l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.
 
 
 ├
[V] l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.
 
 
 ├
[V] vxlan:RsVxlanEppAtt A source relation to an abstract representation of a resolvable endpoint profile.
 ├
[V] l3:EncRtdIf The routed interface corresponds to a sub-interface in Cisco’s routing terminology. A sub-interface is a logical L3 interface created on an underlying physical L3 port (the parent interface). Each sub-interface is associated with an 802.1Q VLAN tag. The traffic that comes on the parent interface with that tag is considered for that sub-interface. The existence of a routed interface under a VRF or infra VRF also implies that the interface belo...
 
 ├
[V] ethpm:EncRtdIf Subinterface information holder
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l3:RsEncPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.
 
 ├
[V] l3:RsL3If The source of the sub-interface/l3-interface.
 
 ├
[V] l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.
 
 ├
[V] nw:RtPathToIf A target relation to the interface information.
 
 ├
[V] rmon:Dot1d The Dot1d statistics.
 
 ├
[V] rmon:Dot3Stats The Dot3 statistics.
 
 ├
[V] rmon:EtherStats The Ethernet statistics.
 
 ├
[V] rmon:IfHCIn The interface high capacity input statistics.
 
 ├
[V] rmon:IfHCOut The interface high capacity output statistics.
 
 ├
[V] rmon:IfIn The interface input statistics.
 
 ├
[V] rmon:IfOut The interface output statistics.
 
 ├
[V] rmon:IfStorm 
 
 ├
[V] rmon:IpIn The IPV4 input statistics.
 
 ├
[V] rmon:Ipv6IfStats The IPV6 interface statistics.
 ├
[V] l3:LbRtdIf The routed loopback interface.
 
 ├
[V] ethpm:LbRtdIf Loopback interface information holder
 
 ├
[V] l3:RsL3If The source of the sub-interface/l3-interface.
 
 ├
[V] l3:RsLbIfToLocale A loopback created for the router ID. This relation is un-enforced because the code tries to access the real-time monitoring tool.
 
 
 ├
[V] l3:Cons  Represents a consumer of a resource.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] l3:RsLbIfToOutRef 
 
 ├
[V] l3:RsProtLbIf A loopback created for protection groups.
 
 ├
[V] l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.
 
 ├
[V] nw:RtPathToIf A target relation to the interface information.
 ├
[V] l3:RtEPgDefToL3Dom A target relation to the layer 3 domain (VRF).
 ├
[V] l3:RtdIf A target relation to the routed concrete interface. This corresponds to a physical L3 interface. The existence of a routed concrete interface under a VRF or infra VRF also implies that interface belongs to that VRF. An L3 interface can belong to only one VRF at a time.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l3:RsL3If The source of the sub-interface/l3-interface.
 
 ├
[V] l3:RsPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.
 
 ├
[V] l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.
 
 ├
[V] nw:RtPathToIf A target relation to the interface information.
 ├
[V] mgmt:RtdMgmtIf Routed management interface
 
 ├
[V] l3:RsL3If The source of the sub-interface/l3-interface.
 
 ├
[V] l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.
 
 ├
[V] mgmt:RsRtdMgmtConf A source relation to the management interface.
 
 ├
[V] nw:RtPathToIf A target relation to the interface information.
 ├
[V] mp:PodExtn  Multi Pod Pod Extension Container
 
 ├
[V] mp:AnycastExtn  Anycast Address Extension for a Pod
 ├
[V] svccopy:SvcDb  Abstraction of copy service database
 
 ├
[V] svccopy:DTEp  Tunnel endpoints learnt through svc dest
 ├
[V] topoctrl:ShardChP The shard chaining policy.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] tunnel:CtrlPfxEntry  Conversational tunnels discovered matching these external prefixes are marked untrusted or trusted based on whether the sclass can be trusted or not
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] tunnel:Ctx  Tunnel container for all tunnel related information for a given layer 3 domain
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tunnel:Db  Tunnel databases
 
 ├
[V] tunnel:EpRetPol  End-Point retention policy identifying the duration of how long information is kept about remote end-point. This is expressed through a set of triggering and aging control parameters
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] tunnel:PfxEntry  Tunnel prefix white list. The tunnels are formed through conversation. Only the tunnels that are part of the whitelist are allowed to form
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.


Inheritance
[V] nw:Item Ignore.
 ├
[V] nw:Conn A connection abstraction.
 
 ├
[V] nw:GEp A group endpoint abstraction.
 
 
 ├
[V] nw:FwDom A data plane domain abstraction. This object represents a domain within a forwarding plane instance. For example, a bridge domain.
 
 
 
 ├
[V] l3:Dom The Layer 3 Domain (VRF).
 
 
 
 
 ├
[V] l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.


Events
                


Faults
                l3:Dom:l3vmCfgCtrl


Fsms
                


Properties Summary
Defined in: l3:Inst
reference:BinRef monPolDn  (l3:Inst:monPolDn)
           The monitoring policy for the Layer 3 instance object.
naming:Name
          string:Basic
name  (l3:Inst:name)
           Overrides:l3:Dom:name | nw:FwDom:name | nw:Conn:name
           The Layer 3 instance name.
Defined in: l3:Dom
l3:VrfAdminState
          scalar:Enum8
adminState  (l3:Dom:adminState)
           vrf Admin State
l3:BgpRdBytes
          base:Uint8Array8
bgpRd  (l3:Dom:bgpRd)
           bgp route distinguisher
string:Basic bgpRdDisp  (l3:Dom:bgpRdDisp)
          
scalar:Date createTs  (l3:Dom:createTs)
           vrf creation time
fv:PrimKey
          reference:BinRef
ctxPKey  (l3:Dom:ctxPKey)
           DN of the fv:Ctx to which the fault will get delegated
base:Encap encap  (l3:Dom:encap)
           Encap for this Context
scalar:Uint32 gsdbCtx  (l3:Dom:gsdbCtx)
           gsdb context
l3:VrfId
          scalar:Uint16
id  (l3:Dom:id)
           vrf id
scalar:Bitmask64 l3vmCfgFailedBmp  (l3:Dom:l3vmCfgFailedBmp)
          
scalar:Time l3vmCfgFailedTs  (l3:Dom:l3vmCfgFailedTs)
          
scalar:UByte l3vmCfgState  (l3:Dom:l3vmCfgState)
          
scalar:Date lastChgdTs  (l3:Dom:lastChgdTs)
           last state change time
l3:VrfOperStateQual
          scalar:Enum8
oldOperStQual  (l3:Dom:oldOperStQual)
           old oper state reason
l3:VrfOperStateQual
          scalar:Enum8
operStQual  (l3:Dom:operStQual)
           oper state reason
l3:VrfOperState
          scalar:Enum8
operState  (l3:Dom:operState)
           The VRF operational state.
scalar:Uint32 oui  (l3:Dom:oui)
           vrf oui
scalar:Bool pending  (l3:Dom:pending)
           pending operation status
scalar:Uint32 prtclBmp  (l3:Dom:prtclBmp)
           protocols in a vrf
l3:VrfId
          scalar:Uint16
resourceId  (l3:Dom:resourceId)
          
actrl:ScopeId
          scalar:Uint32
scope  (l3:Dom:scope)
           Scope of the context. It identifies the classId pool and all the epg/bd classIds belonging to this context needs to be allocated from this pool
actrl:SecLbl
          scalar:Uint16
secLbl  (l3:Dom:secLbl)
          
scalar:Uint32 v4TibId  (l3:Dom:v4TibId)
           ipv4 table id
string:Basic v4TibName  (l3:Dom:v4TibName)
           ipv4 table name
l3:VrfOperStateQual
          scalar:Enum8
v4TibOldOperStQual  (l3:Dom:v4TibOldOperStQual)
           ipv4 table old oper state reason
l3:VrfOperStateQual
          scalar:Enum8
v4TibOperStQual  (l3:Dom:v4TibOperStQual)
           ipv4 table oper state reason
l3:VrfOperState
          scalar:Enum8
v4TibOperState  (l3:Dom:v4TibOperState)
           ipv4 table operational state.
scalar:Bool v4TibPending  (l3:Dom:v4TibPending)
           ipv4 table pending operation status
scalar:Bool v4TibValid  (l3:Dom:v4TibValid)
           ipv4 table valid
scalar:Uint32 v6TibId  (l3:Dom:v6TibId)
           ipv6 table id
string:Basic v6TibName  (l3:Dom:v6TibName)
           ipv6 table name
l3:VrfOperStateQual
          scalar:Enum8
v6TibOldOperStQual  (l3:Dom:v6TibOldOperStQual)
           ipv6 table old oper state reason
l3:VrfOperStateQual
          scalar:Enum8
v6TibOperStQual  (l3:Dom:v6TibOperStQual)
           ipv6 table oper state reason
l3:VrfOperState
          scalar:Enum8
v6TibOperState  (l3:Dom:v6TibOperState)
           ipv6 table Oper State
scalar:Bool v6TibPending  (l3:Dom:v6TibPending)
           ipv6 table pending operation status
scalar:Bool v6TibValid  (l3:Dom:v6TibValid)
           ipv6 table valid
scalar:Uint32 vpnId  (l3:Dom:vpnId)
           vrf vpnId
Defined in: mo:Resolvable
mo:Owner
          scalar:Enum8
lcOwn  (mo:Resolvable:lcOwn)
           A value that indicates how this object was created. For internal use only.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32
childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32
status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Defined in: mo:Modifiable
mo:TStamp
          scalar:Date
modTs  (mo:Modifiable:modTs)
           The time when this object was last modified.
Properties Detail

adminState

Type: l3:VrfAdminState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
vrf Admin State
Constants
shutdown 1 shutdown NO COMMENTS
admin-up 2 admin-up NO COMMENTS
DEFAULT admin-up(2) admin-up NO COMMENTS





bgpRd

Type: l3:BgpRdBytes
Primitive Type: base:Uint8Array8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
bgp route distinguisher



bgpRdDisp

Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:



childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to





createTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
vrf creation time



ctxPKey

Type: fv:PrimKey
Primitive Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
DN of the fv:Ctx to which the fault will get delegated



dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.



encap

Type: base:Encap

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Encap for this Context



gsdbCtx

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
gsdb context



id

Type: l3:VrfId
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
vrf id



l3vmCfgFailedBmp

Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:



l3vmCfgFailedTs

Type: scalar:Time

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:



l3vmCfgState

Type: scalar:UByte

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:



lastChgdTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
last state change time



lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
A value that indicates how this object was created. For internal use only.
Constants
local 0 Local NO COMMENTS
policy 1 Policy NO COMMENTS
replica 2 Replica NO COMMENTS
resolveOnBehalf 3 ResolvedOnBehalf NO COMMENTS
implicit 4 Implicit NO COMMENTS
DEFAULT local(0) Local NO COMMENTS





modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The time when this object was last modified.
Constants
never 0ull never NO COMMENTS
DEFAULT never(0ull) never NO COMMENTS





monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The monitoring policy for the Layer 3 instance object.



name

Type: naming:Name
Primitive Type: string:Basic

Overrides:l3:Dom:name  |  nw:FwDom:name  |  nw:Conn:name
Units: null Encrypted: false Naming Property -- [NAMING RULES] Access: naming Category: TopLevelRegular
    Comments:
The Layer 3 instance name.



oldOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
old oper state reason
Constants
admin-down 1 admin-down NO COMMENTS
admin-down-pending 2 admin-down-pending NO COMMENTS
delete-holddown 3 delete-holddown NO COMMENTS
delete-pending 4 delete-pending NO COMMENTS
invalid 5 invalid NO COMMENTS
create-pending 6 create-pending NO COMMENTS
DEFAULT admin-down(1) admin-down NO COMMENTS





operStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
oper state reason
Constants
admin-down 1 admin-down NO COMMENTS
admin-down-pending 2 admin-down-pending NO COMMENTS
delete-holddown 3 delete-holddown NO COMMENTS
delete-pending 4 delete-pending NO COMMENTS
invalid 5 invalid NO COMMENTS
create-pending 6 create-pending NO COMMENTS
DEFAULT admin-down(1) admin-down NO COMMENTS





operState

Type: l3:VrfOperState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The VRF operational state.
Constants
up 1 up NO COMMENTS
down 2 down NO COMMENTS
DEFAULT down(2) down NO COMMENTS





oui

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
vrf oui



pending

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
pending operation status
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS





prtclBmp

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
protocols in a vrf



resourceId

Type: l3:VrfId
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:



rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.



scope

Type: actrl:ScopeId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Scope of the context. It identifies the classId pool and all the epg/bd classIds belonging to this context needs to be allocated from this pool
Constants
defaultValue 1u --- NO COMMENTS





secLbl

Type: actrl:SecLbl
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:



status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.






v4TibId

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv4 table id



v4TibName

Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv4 table name



v4TibOldOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv4 table old oper state reason
Constants
admin-down 1 admin-down NO COMMENTS
admin-down-pending 2 admin-down-pending NO COMMENTS
delete-holddown 3 delete-holddown NO COMMENTS
delete-pending 4 delete-pending NO COMMENTS
invalid 5 invalid NO COMMENTS
create-pending 6 create-pending NO COMMENTS
DEFAULT admin-down(1) admin-down NO COMMENTS





v4TibOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv4 table oper state reason
Constants
admin-down 1 admin-down NO COMMENTS
admin-down-pending 2 admin-down-pending NO COMMENTS
delete-holddown 3 delete-holddown NO COMMENTS
delete-pending 4 delete-pending NO COMMENTS
invalid 5 invalid NO COMMENTS
create-pending 6 create-pending NO COMMENTS
DEFAULT admin-down(1) admin-down NO COMMENTS





v4TibOperState

Type: l3:VrfOperState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv4 table operational state.
Constants
up 1 up NO COMMENTS
down 2 down NO COMMENTS
DEFAULT down(2) down NO COMMENTS





v4TibPending

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv4 table pending operation status
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS





v4TibValid

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv4 table valid
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS





v6TibId

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv6 table id



v6TibName

Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv6 table name



v6TibOldOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv6 table old oper state reason
Constants
admin-down 1 admin-down NO COMMENTS
admin-down-pending 2 admin-down-pending NO COMMENTS
delete-holddown 3 delete-holddown NO COMMENTS
delete-pending 4 delete-pending NO COMMENTS
invalid 5 invalid NO COMMENTS
create-pending 6 create-pending NO COMMENTS
DEFAULT admin-down(1) admin-down NO COMMENTS





v6TibOperStQual

Type: l3:VrfOperStateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv6 table oper state reason
Constants
admin-down 1 admin-down NO COMMENTS
admin-down-pending 2 admin-down-pending NO COMMENTS
delete-holddown 3 delete-holddown NO COMMENTS
delete-pending 4 delete-pending NO COMMENTS
invalid 5 invalid NO COMMENTS
create-pending 6 create-pending NO COMMENTS
DEFAULT admin-down(1) admin-down NO COMMENTS





v6TibOperState

Type: l3:VrfOperState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv6 table Oper State
Constants
up 1 up NO COMMENTS
down 2 down NO COMMENTS
DEFAULT down(2) down NO COMMENTS





v6TibPending

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv6 table pending operation status
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS





v6TibValid

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
ipv6 table valid
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS





vpnId

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
vrf vpnId