Properties Summary |
Defined in: latency:LatencyAvg2 |
scalar:Uint32
|
seqNoAvg (latency:LatencyAvg2:seqNoAvg)
Sequence number. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
seqNoBase (latency:LatencyAvg2:seqNoBase)
Sequence number. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint32
|
seqNoCum (latency:LatencyAvg2:seqNoCum)
Sequence number. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint32
|
seqNoLast (latency:LatencyAvg2:seqNoLast)
Sequence number. This is the most current value read by the counter.
|
scalar:Uint32
|
seqNoMax (latency:LatencyAvg2:seqNoMax)
Sequence number. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
seqNoMin (latency:LatencyAvg2:seqNoMin)
Sequence number. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
seqNoPer (latency:LatencyAvg2:seqNoPer)
Sequence number. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
seqNoRate (latency:LatencyAvg2:seqNoRate)
Sequence number. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
seqNoSpct (latency:LatencyAvg2:seqNoSpct)
Sequence number. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
seqNoThr (latency:LatencyAvg2:seqNoThr)
Sequence number. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint32
|
seqNoTr (latency:LatencyAvg2:seqNoTr)
Sequence number. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
seqNoTrBase (latency:LatencyAvg2:seqNoTrBase)
Sequence number. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Uint64
|
stdDevAvg (latency:LatencyAvg2:stdDevAvg)
Standard deviation. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
stdDevBase (latency:LatencyAvg2:stdDevBase)
Standard deviation. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint64
|
stdDevCum (latency:LatencyAvg2:stdDevCum)
Standard deviation. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint64
|
stdDevLast (latency:LatencyAvg2:stdDevLast)
Standard deviation. This is the most current value read by the counter.
|
scalar:Uint64
|
stdDevMax (latency:LatencyAvg2:stdDevMax)
Standard deviation. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
stdDevMin (latency:LatencyAvg2:stdDevMin)
Standard deviation. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
stdDevPer (latency:LatencyAvg2:stdDevPer)
Standard deviation. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
stdDevRate (latency:LatencyAvg2:stdDevRate)
Standard deviation. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
stdDevSpct (latency:LatencyAvg2:stdDevSpct)
Standard deviation. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
stdDevThr (latency:LatencyAvg2:stdDevThr)
Standard deviation. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint64
|
stdDevTr (latency:LatencyAvg2:stdDevTr)
Standard deviation. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
stdDevTrBase (latency:LatencyAvg2:stdDevTrBase)
Standard deviation. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Uint64
|
totPktCountAvg (latency:LatencyAvg2:totPktCountAvg)
Total packet count. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
totPktCountBase (latency:LatencyAvg2:totPktCountBase)
Total packet count. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint64
|
totPktCountCum (latency:LatencyAvg2:totPktCountCum)
Total packet count. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint64
|
totPktCountLast (latency:LatencyAvg2:totPktCountLast)
Total packet count. This is the most current value read by the counter.
|
scalar:Uint64
|
totPktCountMax (latency:LatencyAvg2:totPktCountMax)
Total packet count. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
totPktCountMin (latency:LatencyAvg2:totPktCountMin)
Total packet count. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
totPktCountPer (latency:LatencyAvg2:totPktCountPer)
Total packet count. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
totPktCountRate (latency:LatencyAvg2:totPktCountRate)
Total packet count. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
totPktCountSpct (latency:LatencyAvg2:totPktCountSpct)
Total packet count. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
totPktCountThr (latency:LatencyAvg2:totPktCountThr)
Total packet count. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint64
|
totPktCountTr (latency:LatencyAvg2:totPktCountTr)
Total packet count. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
totPktCountTrBase (latency:LatencyAvg2:totPktCountTrBase)
Total packet count. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
cnt
Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The number of readings made within the current sample.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
lastCollOffset
Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
modTs
Type: mo:TStamp
Primitive Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The time when this object was last modified.
| |
Constants |
never |
0ull |
never |
NO COMMENTS
|
DEFAULT |
never(0ull) |
never |
NO COMMENTS
|
|
repIntvEnd
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
repIntvStart
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
seqNoAvg
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Sequence number. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
seqNoBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
Sequence number. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
seqNoCum
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
Sequence number. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
seqNoLast
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Sequence number. This is the most current value read by the counter.
seqNoMax
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Sequence number. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
seqNoMin
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Sequence number. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
seqNoPer
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
Sequence number. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
seqNoRate
Type: scalar:Double
Units: packets
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
Sequence number. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
seqNoSpct
Type: scalar:Uint16
Units: packets
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Sequence number. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
seqNoThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Sequence number. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
seqNoTr
Type: scalar:Sint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Sequence number. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
seqNoTrBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Sequence number. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|
stdDevAvg
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Standard deviation. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
stdDevBase
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
Standard deviation. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
stdDevCum
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
Standard deviation. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
stdDevLast
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Standard deviation. This is the most current value read by the counter.
stdDevMax
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Standard deviation. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
stdDevMin
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Standard deviation. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
stdDevPer
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
Standard deviation. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
stdDevRate
Type: scalar:Double
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
Standard deviation. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
stdDevSpct
Type: scalar:Uint16
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Standard deviation. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
stdDevThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Standard deviation. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
stdDevTr
Type: scalar:Sint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Standard deviation. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
stdDevTrBase
Type: scalar:Uint64
Units: microseconds
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Standard deviation. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
totPktCountAvg
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Total packet count. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
totPktCountBase
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
Total packet count. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
totPktCountCum
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
Total packet count. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
totPktCountLast
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Total packet count. This is the most current value read by the counter.
totPktCountMax
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Total packet count. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
totPktCountMin
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Total packet count. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
totPktCountPer
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
Total packet count. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
totPktCountRate
Type: scalar:Double
Units: packets
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
Total packet count. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
totPktCountSpct
Type: scalar:Uint16
Units: packets
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Total packet count. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
totPktCountThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Total packet count. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
totPktCountTr
Type: scalar:Sint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Total packet count. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
totPktCountTrBase
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Total packet count. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.