Properties Summary |
Defined in: ospf:AAdjEp |
ospf:AreaId
address:IPv4
|
area (ospf:AAdjEp:area)
The OSPF Area ID. An area is a logical collection of OSPF networks, routers, and links that have the same area identification. A router within an area must maintain a topological database for the area to which it belongs. The router doesn't have detailed information about network topology outside of its area, thereby reducing the size of its database. Areas limit the scope of route information distribution. It is not possible to do route update filtering within an area. The link-state database (LSDB) of routers within the same area must be synchronized and be exactly the same; however, route summarization and filtering is possible between different areas. The main benefit of creating areas is a reduction in the number of routes to propagate - by the filtering and the summarization of routes. Areas are identified by an area ID. Cisco IOS software supports area IDs expressed in IP address format or decimal format, for example, area 0.0.0.0 is equal to area 0.
|
ospf:DesigAddr
address:Ip
|
bdr (ospf:AAdjEp:bdr)
The OSPF backup designated router IP address.
|
ospf:BfdOperSt
scalar:Enum8
|
bfdSt (ospf:AAdjEp:bfdSt)
The BFD state.
|
ospf:Options
scalar:Uint32
|
dbdOptions (ospf:AAdjEp:dbdOptions)
The database descriptor packet peer options.
|
ospf:DesigAddr
address:Ip
|
dr (ospf:AAdjEp:dr)
A designated router address.
|
ospf:AdjFlags
scalar:Bitmask16
|
flags (ospf:AAdjEp:flags)
The IP address flags.
|
ospf:Options
scalar:Uint32
|
helloOptions (ospf:AAdjEp:helloOptions)
The hello packet peer options.
|
ospf:AdjIfId
scalar:Uint32
|
ifId (ospf:AAdjEp:ifId)
The OSPF neighbor interface ID.
|
ospf:AdjOperSt
scalar:Enum8
|
operSt (ospf:AAdjEp:operSt)
The runtime state of the object or policy.
|
address:Ip
|
peerIp (ospf:AAdjEp:peerIp)
The ID of the fabric interconnect port to which the fabric port is connected.
|
string:Basic
|
peerName (ospf:AAdjEp:peerName)
The address of the peer
|
ospf:DesigPrio
scalar:UByte
|
prio (ospf:AAdjEp:prio)
The QoS priority class ID.
|
area
Type: ospf:AreaId
Primitive Type: address:IPv4
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The OSPF Area ID. An area is a logical collection of OSPF networks, routers, and links that have the same area identification. A router within an area must maintain a topological database for the area to which it belongs. The router doesn't have detailed information about network topology outside of its area, thereby reducing the size of its database. Areas limit the scope of route information distribution. It is not possible to do route update filtering within an area. The link-state database (LSDB) of routers within the same area must be synchronized and be exactly the same; however, route summarization and filtering is possible between different areas. The main benefit of creating areas is a reduction in the number of routes to propagate - by the filtering and the summarization of routes. Areas are identified by an area ID. Cisco IOS software supports area IDs expressed in IP address format or decimal format, for example, area 0.0.0.0 is equal to area 0.
| |
Constants |
backbone |
0u |
Backbone area |
NO COMMENTS
|
defaultValue |
1u |
--- |
NO COMMENTS
|
|
bdr
Type: ospf:DesigAddr
Primitive Type: address:Ip
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The OSPF backup designated router IP address.
bfdSt
Type: ospf:BfdOperSt
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The BFD state.
| |
Constants |
down |
0 |
Down |
The session is down
|
up |
1 |
Up |
The session is up
|
DEFAULT |
0 |
--- |
BFD state
|
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
dbdOptions
Type: ospf:Options
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The database descriptor packet peer options.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
dr
Type: ospf:DesigAddr
Primitive Type: address:Ip
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
A designated router address.
flags
Type: ospf:AdjFlags
Primitive Type: scalar:Bitmask16
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The IP address flags.
| |
Constants |
unspecified |
0 |
Unspecified |
Unspecified
|
master-self |
1 |
Master self |
Local node is master
|
all-dbds-sent |
2 |
All DBDs sent |
All DBDs sent
|
all-dbds-acked |
4 |
All DBDs acked |
All DBDs acked
|
peer-gr-helper |
8 |
Peer is GR Helper |
Neighbor in GR helper mode
|
DEFAULT |
unspecified(0) |
Unspecified |
Unspecified
|
|
helloOptions
Type: ospf:Options
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The hello packet peer options.
id
Type: ospf:AdjId
Primitive Type: address:IPv4
Overrides:ospf:AAdjEp:id
Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular
Comments:
-
An object identifier.
ifId
Type: ospf:AdjIfId
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The OSPF neighbor interface ID.
modTs
Type: mo:TStamp
Primitive Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The time when this object was last modified.
| |
Constants |
never |
0ull |
never |
NO COMMENTS
|
DEFAULT |
never(0ull) |
never |
NO COMMENTS
|
|
monPolDn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The monitoring policy attached to this observable object.
name
Type: naming:Name
Primitive Type: string:Basic
Overrides:nw:Conn:name
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Comments:
-
The name of the object.
operSt
Type: ospf:AdjOperSt
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The runtime state of the object or policy.
| |
Constants |
unknown |
0 |
Unknown |
Unknown
|
down |
1 |
Down |
Down
|
attempt |
2 |
Attempt |
Attempt
|
initializing |
3 |
Initializing |
Initializing
|
two-way |
4 |
Two-way |
Two-way
|
exstart |
5 |
Exstart |
Exstart
|
exchange |
6 |
Exchange |
Exchange
|
loading |
7 |
Loading |
Loading
|
full |
8 |
Full |
Full
|
self |
9 |
Self |
Self
|
DEFAULT |
down(1) |
Down |
Down
|
|
peerIp
Type: address:Ip
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The ID of the fabric interconnect port to which the fabric port is connected.
peerName
Type: string:Basic
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The address of the peer
prio
Type: ospf:DesigPrio
Primitive Type: scalar:UByte
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Comments:
-
The QoS priority class ID.
| |
Constants |
defaultValue |
1 |
--- |
NO COMMENTS
|
|
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|