Class pol:RsDependencyToFailedEpP (CONCRETE)

Class ID:6185
Class Label: Represents a Failed EpP or its Child
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled
Relationship Type: explicit
Relationship Cardinality: n-to-m
Relationship From: pol:DependencyExpression
Relationship From Rel: pol:RsDependencyToFailedEpP
Relationship To: fv:FailedEpP
Relationship To Rel: fv:RtDependencyToFailedEpP
Enforceable: false
Resolvable: true
Write Access: [NON CONFIGURABLE]
Read Access: [admin]
Creatable/Deletable: yes (see Container Mos for details)
Semantic Scope: None
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: false, HasStats: false, HasFaults: false, HasHealth: false, HasEventRules: false ]



Naming Rules
RN FORMAT: rsdependencyToFailedEpP-{[tDn]}

    [1] PREFIX=rsdependencyToFailedEpP- PROPERTY = tDn




DN FORMAT: 

[0] dependencycont/dependentOnClass-{dependentOn}/expression-{expression}/rsdependencyToFailedEpP-{[tDn]}

[1] dependencycont/expression-{expression}/rsdependencyToFailedEpP-{[tDn]}

[2] dependencycont/dependentOn-{[dependentOn]}/expression-{expression}/rsdependencyToFailedEpP-{[tDn]}

                


Diagram

Super Mo: reln:To,
Container Mos: pol:DependencyExpression (deletable:yes),


Containers Hierarchies
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] pol:DependencyCont 
 
 ├
[V] pol:DependentOnClass 
 
 
 ├
[V] pol:DependencyExpression 
 
 
 
 ├
[V] pol:RsDependencyToFailedEpP 
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] pol:DependencyCont 
 
 ├
[V] pol:ADependentOn 
 
 
 ├
[V] pol:DependencyExpression 
 
 
 
 ├
[V] pol:RsDependencyToFailedEpP 
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] pol:DependencyCont 
 
 ├
[V] pol:DependentOn 
 
 
 ├
[V] pol:DependencyExpression 
 
 
 
 ├
[V] pol:RsDependencyToFailedEpP 


Contained Hierarchy
[V] pol:RsDependencyToFailedEpP 


Inheritance
[V] reln:Inst This is generated and used only by internal processes.
 ├
[V] reln:To This is generated and used only by internal processes.
 
 ├
[V] pol:RsDependencyToFailedEpP 


Events
                


Faults
                


Fsms
                


Properties Summary
Defined in: pol:RsDependencyToFailedEpP
fv:NwIssues
          scalar:Bitmask64
resolvedConfigQual  (pol:RsDependencyToFailedEpP:resolvedConfigQual)
           NO COMMENTS
fv:StorageIssues
          scalar:Bitmask64
resolvedStrgConfigQual  (pol:RsDependencyToFailedEpP:resolvedStrgConfigQual)
           NO COMMENTS
reln:ClassId
          scalar:Enum16
tCl  (pol:RsDependencyToFailedEpP:tCl)
           Overrides:reln:Inst:tCl
           The class ID of the target object. This property is managed internally and should not be modified by the user.
reln:Dn
          reference:BinRef
tDn  (pol:RsDependencyToFailedEpP:tDn)
           Overrides:reln:Inst:tDn
           The distinguished name of the target.
fv:NwIssues
          scalar:Bitmask64
unresolvedConfigQual  (pol:RsDependencyToFailedEpP:unresolvedConfigQual)
           NO COMMENTS
fv:StorageIssues
          scalar:Bitmask64
unresolvedStrgConfigQual  (pol:RsDependencyToFailedEpP:unresolvedStrgConfigQual)
           NO COMMENTS
Defined in: reln:To
scalar:Bool forceResolve  (reln:To:forceResolve)
           Whether the relation should force pull the target.
reln:ResolverType
          scalar:Enum8
rType  (reln:To:rType)
           Represents the type of resolver.
reln:State
          scalar:Enum8
state  (reln:To:state)
           Represents the state of the relationship.
reln:StateQual
          scalar:Enum8
stateQual  (reln:To:stateQual)
           Represents the state qualifier of the relationship.
reln:TargetType
          scalar:Enum8
tType  (reln:To:tType)
           The type of target.
Defined in: mo:Resolvable
mo:Owner
          scalar:Enum8
lcOwn  (mo:Resolvable:lcOwn)
           A value that indicates how this object was created. For internal use only.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32
childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32
status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Defined in: mo:Modifiable
mo:TStamp
          scalar:Date
modTs  (mo:Modifiable:modTs)
           The time when this object was last modified.
Properties Detail

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to





dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.



forceResolve

Type: scalar:Bool

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Whether the relation should force pull the target.
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT yes(true) --- NO COMMENTS





lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
A value that indicates how this object was created. For internal use only.
Constants
local 0 Local NO COMMENTS
policy 1 Policy NO COMMENTS
replica 2 Replica NO COMMENTS
resolveOnBehalf 3 ResolvedOnBehalf NO COMMENTS
implicit 4 Implicit NO COMMENTS
DEFAULT local(0) Local NO COMMENTS





modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The time when this object was last modified.
Constants
never 0ull never NO COMMENTS
DEFAULT never(0ull) never NO COMMENTS





rType

Type: reln:ResolverType
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Represents the type of resolver.
Constants
mo 1 mo NO COMMENTS
service 2 service NO COMMENTS
local 3 local NO COMMENTS
DEFAULT mo(1) mo NO COMMENTS





resolvedConfigQual

Type: fv:NwIssues
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
not-applicable 0ull N/A NO COMMENTS
tnlepg-accEncap-missing 0x1000000000000000ull AccEncap should be set for TnlEPG deployment on Core Port. Vlan Encap should be set to tunnel before TnlEPG deployment.
port-configured-for-breakout 0x100000000000000ull Interface Configured For Breakout Port configured for breakout
encap-mode-mismatch 0x10000000000000ull Different encap modes are not allowed for an encap on a given interface. Different encap modes are not allowed for an encap on a given interface
not-supported-with-egress-policy-enforcement-mode 0x1000000000000ull Not supported with VRFs Egress Policy Enforcement Mode Not Supprted with VRF's "egress" policy enforcement mode
def-rtleak-criteria-conflict 0x100000000000ull Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides.
default-rt-leak-scope-conflict 0x10000000000ull L3 Outsides have Different Scopes for Default Route Leak Policies on the same Node For Given Context(VRF) on the same Node, All L3 Outsides must have same Scope for Default Route Leak Policy.
bgp-peer-profile-conflict 0x1000000000ull Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides.
dest-is-member-of-pc-or-vpc 0x100000000ull SPAN Destination Cannot be PC or VPC Member SPAN validations
ip-address-already-in-use 0x10000000ull IP Address Already in Use IP-Address already in use
accEncap-existing-on-other-tnlepg 0x2000000000000000ull AccEncap should not be same for different TnlEPGs on Core Port. Vlan Encap should be different on different TnlEPGs on same Core Port.
ipattr-already-in-use 0x200000000000000ull IP attribute already Used by another EPG IpAttr validation. an IpAttr can be used by only 1 EPg in a given l2BD
tnlepg-port-mode-mismatch 0x20000000000000ull Port mode should be set to tunnel for Tunnel deployment. Port mode should be set to tunnel before TnlEPG deployment.
interleak-policy-conflict 0x2000000000000ull Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
dns-not-supported-on-spine-inb 0x200000000000ull Inband DNS resolution not supported on spines. DNS on inb epg is not supported on spine.
multiple-dom-vnid-conflict 0x20000000000ull Multiple domains VNID conflict multiple domain VNID conflict
router-id-conflict 0x2000000000ull Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides.
filter-entry-protocol-not-supported 0x200000000ull Filter Entry Unsupported Protocol Value Filter validations
invalid-ep-selection 0x20000000ull Spine Cannot Be Selected For this EP Invalid EP selection
bgpProt-policy-already-existing 0x4000000000000000ull A specific leaf node can hold only a single bgpProtP config; this fault is raised when inconsistent configuration is detected A specific leaf node can hold only a single bgpProtP config, this fault is raised when inconsistent configuration is detected
Cdp-tunneling-with-cdp-enabled-interface 0x400000000000000ull CDP on tunnel interface is not allowed when protocol mask is set to CDP This fault is raised when you enable CDP on a Tunnel Interface, on which CDP tunneling mask is already enabled
tnlepg-existing-on-port 0x40000000000000ull Only one Tunnel can be deployed on an edge port. Only one TnlEPG can be set on a port.
rtctrl-enforce-policy-conflict 0x4000000000000ull Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
IP-EPG-not-applicable-to-L2-only-BD 0x400000000000ull IP based EPG not applicable to L2 only BD. IP based EPG is not applicable to L2 only BD.
l3out-config-conflict 0x40000000000ull Operational interface parameters cannot be different (e.g. MTU) from different deployments under a context For a given port, catch and report conflicting properties coming from different l3outs
ospf-area-id-conflict 0x4000000000ull Same OSPF Area for Context(VRF) Deployed on the Node from Different Outsides Same OSPF Area for Context(VRF) Deployed on the Node from Different L3 Outsides.
rule-id-allocation-failed 0x400000000ull Rule ID Cannot Be Allocated rule id allocation exhausted
path-wiring-issues 0x40000000ull Path Wiring Issues Path has wiring issues The path (port/port-channel) getting referred has wiring-issues, which means the link is not connected to a supported peer.
multiple-mgmt-epg 0x4000000ull Multiple Management EPGs Configured For Node Multiple managment EPgs configured
qinq-doubleEncap-port-with-regular-epgs-having-regular-encap 0x8000000000000000ull EPgs with regular encaps cannot be deployed if the port mode is Double-Encap port mode Regular EPgs with regular encaps cannot be deployed if the port mode is Double-Encap port mode
Lldp-tunneling-with-lldp-enabled-interface 0x800000000000000ull LLDP on tunnel interface is not allowed when protocol mask is set to LLDP This fault is raised when you enable LLDP on a Tunnel Interface, on which LLDP tunneling mask is already enabled
Tnlport-with-regularEPGs 0x80000000000000ull Regular EPgs,l2Outs,L3outs cannot be deployed on the edge ports. Port mode change to tunnel not allowed if regular EPGs exist on the port.
dampening-policy-conflict 0x8000000000000ull Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
Qos-Policy-not-supported-for-IP-EPG 0x800000000000ull QoS Policy not supported for IP based EPG. Custom QoS Policy not supported for IP based EPG.
eigrp-multiple-out-conflict 0x80000000000ull EIGRP cannot be deployed on the same node and same context from multiple L3 Outsides For a given context(VRF) on the same Node, EIGRP cannot be enabled on more than one L3 Outside.
ospf-role-conflict 0x8000000000ull OSPF have Different roles for Context(VRF) Deployed on the Node from Different L3 Outsides For Given Context(VRF) OSPF cannot be supporting protocol for BGP for one L3 Outside and Main protocol for some other L3 Outside on the same Node.
duplicate-encap 0x800000000ull Encap Is Already In Use. duplicate encap present on node.
l3port-and-sub-interface-on-path 0x80000000ull L3 Port and Sub-Interface Not Allowed on Same Path L3 Port and Sub-Interface are not allowed on the same path Under a Layer3 Outside, a pure layer3 port and sub-interface configurations are not allowed on the same port.
dhcp-provider-is-not-reachable 0x8000000ull DHCP Provider Not Reachable DHCP provider is not reachable
port-configured-for-fex 1024ull Interface Configured For FEX Port is configured as fex-fabric The path (i.e. port/port-channel) is currently getting used for attaching a FEX. Please check the Fex Profile (infra:FexP) and the port-selectors (infra:HPortS) associated to it.
invalid-exception-mask-for-subnet 1048576ull Exception Subnet Mask Must Be More Specific than Subnet Mask Route Control - L3 External Subnet/Exception validation
port-part-of-port-channel 128ull Port is Member of Port Channel Path is not available The configuration is directly referring to a port which is part of a port-channel. Such configurations may affect the behavior of the port-channel and hence are not allowed. Configuration should refer to the Access-Bundle-Group (infra:AccBndlGrp) directly.
missing-dhcp-lbl-for-infra 131072ull Infra DHCP relay profile is missing corresponding DHCP label DHCP validations
multiple-external-encap 16384ull Only One External Encap Allowed on Bridge Domain External Encap Validations A Bridge Domain (fv:BD) can be extended outside the fabric using only one external encap per node. Check the Layer 2 Outside configuration.
path-is-out-of-service 16777216ull Path Out of Service Path is Out of Service The path (port/port-channel) getting referred is marked Out-of-Service. Check the Out Of Service Policy (fabric:OOServicePol)
vxlan-capacity 16ull Insufficient VXLANs Available Not enough VXLANs available Check the total number of EPgs, BDs, VRFs etc. confgigurations which use a VXLAN Id. There total should not exceed the number of VXLANs supported.
bd-not-present 1ull BD Not Present BD Validations BD is not present on the node. Following issues are possible: 1. This could be a temporary issue as the BD could be in the process of getting pushed to the node. 2. If the EPg is associated with a default BD then check the Connectivity Instrumentation Policy.
port-configured-for-apic 2048ull Port Connected to Controller Port is configured for apic The path (i.e. port/port-channel) is currently getting used for APIC connection, hence no configurations are allowed on it which may bring down the connectivity with APIC
prefix-entry-already-in-use 2097152ull Prefix Entry Already Used in Another EPG Prefix Entry validation Under a Ctx (fvCtx aka VRF), a subnet can belong to only one external EPg at a time. Please check your external network instance profiles (l3ext:InstP) under the Layer3 Outside configurations.
port-configured-as-l3 256ull Interface Configured as L3 Path is configured as l3 The path (i.e. port/port-channel) is currently getting used by some configurations (example L3 Outside) which need the port to be configured as a Layer-3 port.
inconsistent-ibgp-peer-as-number 262144ull Inconsistent iBGP Peer AS number provided BGP Peer AS validations
context-not-present 2ull VRF Not Present Context Validations VRF is not present on the node. Following issues are possible: 1. This could be a temporary issue as the VRF could be in the process of getting pushed to the node. 2. If the EPg is associated with a default VRF then check the Connectivity Instrumentation Policy.
ip-address-not-present 32768ull IP Address Not Present IP-Address Validations
vrf-capacity 32ull Insufficient VRFs Available Not enough VRFs available Check the total number of Ctx(aka VRF) deployed on the node. The total should not exceed the number of VRF supported by the node.
invalid-vlan 33554432ull Invalid VLAN Configuration Invalid VLAN Configuration The domain associated with the EPg is not allowed to use the specified encap. Check the Attachable Profile, and VLAN/VXLAN Namespace (fvns:VlanInstP and fvns:VxlanInstP) configurations associated with the domain.
port-channel-capacity 4096ull Insufficient Port Channels Available Not enough port-channels available Check the total number of Access Bundle Groups (i.e. infra:AccBndlGrp) deployed on the node. The total number of port-channles created by the Access Bundle Groups should not exceed the total number of port-channels supported by the node.
encap-already-in-use 4194304ull Encap Already Used in Another EPG Encap validation On a node, an encap (VLAN or VXLAN) can be used by only 1 EPg or BD at a time.
insufficient-resources 4ull Insufficient Resources overall there are not enough resources
port-configured-as-l2 512ull Interface Configured as L2 Port is configured as l2 The path (i.e. port/port-channel) is currently getting used by some configurations (example L2 Outside, Application EPg) which need the port to be configured as a Layer-2 port.
invalid-bgp-peer-address 524288ull BGP Peer Address Cannot Be Same as Router ID BGP Peer Address validations
invalid-path 64ull Invalid Path Configuration Path is not available Following issues are possible: 1. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) getting referred does not exist on the node. 2. The domain associated with the EPg is not allowed to use the specified path. Check the Attachable Profile configuration associated with the domain. 3. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) is deployed on FEX and is part of l2Out/l3Out. l2Out and l3Out are NOT supported on FEX
multiple-ctx-configuration 65536ull Multiple VRF configuration provided for an encap or path Conflicting VRF validations A Layer-3 interface (which could be a pure-layer3 interface or a sub-interface) can belong to only 1 Ctx (fvCtx aka VRF) at a time. For pure-layer3 interface: Please check the Layer3 Outside configuration and make sure that for a given node same path (port/port-channel) is not part of multiple Layer3 Outsides associated to different fvCtxs. For sub-interface: Please check the Layer3 Outside configuration and make sure that for a given node the same encap is not part of multiple Layer3 Outsides associated to different fvCtxs.
native-or-untagged-encap-failure 8192ull Only One Native or Untagged Encap Allowed on Interface Native/Untagged Vlan Validation You are trying to configure two different encaps as native or untagged on the path (i.e. port/port-channel). Check the "mode" type set on the relations between the EPg and the fabric:Path.
multiple-outsides-from-context-configured-for-the-same-node 8388608ull Multiple External Networks From Same Context Configured For Same Node - Deprecated Multiple Outsides from the Same Context Configured for the Same Node Please check the Layer3 Outside configurations. Fault Deprecated - It's valid now.
vlan-capacity 8ull Insufficient VLANs Available Not enough VLANs available Check the total number of EPgs and BDs deployed on the node. There total should not exceed the number of VLANs supported by the node
DEFAULT not-applicable(0ull) N/A NO COMMENTS





resolvedStrgConfigQual

Type: fv:StorageIssues
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
not-applicable 0ull N/A NO COMMENTS
insufficient-resources 1ull insufficient-resources overall there are not enough resources
invalid-vsan 2ull Invalid VSAN Configuration Invalid VSAN Configuration The domain associated with the EPg is not allowed to use the specified encap. Check the Attachable Profile, VsanAttrP and VSAN Namespace (fvns:VsanInstP) configurations associated with the domain.
native-vsan-failure 4ull Only One Native Vsan Allowed on Interface Native/Untagged Vsan Validation You are trying to configure two different vsans as native on the path (i.e. port/port-channel). Check the "mode" type set on the relations between the EPg and the fabric:Path.
another-encap-for-bd-in-use 8ull BD is assigned another encap Vsan Encap validation If a vsan is already attached to BD, another vsan can not be attached.
encap-already-in-use 8ull Encap Already Used in Another EPG Vsan Encap validation On a node, an encap (VSAN) can be used by only 1 EPg or BD at a time.
DEFAULT not-applicable(0ull) N/A NO COMMENTS





rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.



state

Type: reln:State
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Represents the state of the relationship.
Constants
unformed 0 unformed the relationship is not formed
formed 1 formed the relationship is formed with the target object
missing-target 2 missing-target target does not exist
invalid-target 4 invalid-target invalid target DN
cardinality-violation 5 cardinality-violation cardinality violation - When relations are created such that they violate the cardinality, state of the relation would be set to this.
DEFAULT unformed(0) unformed the relationship is not formed





stateQual

Type: reln:StateQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Represents the state qualifier of the relationship.
Constants
none 0 none no issue
mismatch-target 1 mismatch-target target not found, using default
default-target 2 default-target target not specified, using default
DEFAULT none(0) none no issue





status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.






tCl

Type: reln:ClassId
Primitive Type: scalar:Enum16

Overrides:reln:Inst:tCl
Units: null Encrypted: false Access: implicit Category: TopLevelRegular
    Comments:
The class ID of the target object. This property is managed internally and should not be modified by the user.
Constants
unspecified 0 unspecified NO COMMENTS
fvFailedEpP 2120 --- NO COMMENTS
DEFAULT fvFailedEpP(2120) --- NO COMMENTS





tDn

Type: reln:Dn
Primitive Type: reference:BinRef

Overrides:reln:Inst:tDn
Units: null Encrypted: false Naming Property -- [NAMING RULES] Access: naming Category: TopLevelRegular
    Comments:
The distinguished name of the target.



tType

Type: reln:TargetType
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The type of target.
Constants
name 0 name NO COMMENTS
mo 1 mo NO COMMENTS
all 2 all NO COMMENTS
DEFAULT mo(1) mo NO COMMENTS





unresolvedConfigQual

Type: fv:NwIssues
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
not-applicable 0ull N/A NO COMMENTS
tnlepg-accEncap-missing 0x1000000000000000ull AccEncap should be set for TnlEPG deployment on Core Port. Vlan Encap should be set to tunnel before TnlEPG deployment.
port-configured-for-breakout 0x100000000000000ull Interface Configured For Breakout Port configured for breakout
encap-mode-mismatch 0x10000000000000ull Different encap modes are not allowed for an encap on a given interface. Different encap modes are not allowed for an encap on a given interface
not-supported-with-egress-policy-enforcement-mode 0x1000000000000ull Not supported with VRFs Egress Policy Enforcement Mode Not Supprted with VRF's "egress" policy enforcement mode
def-rtleak-criteria-conflict 0x100000000000ull Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides.
default-rt-leak-scope-conflict 0x10000000000ull L3 Outsides have Different Scopes for Default Route Leak Policies on the same Node For Given Context(VRF) on the same Node, All L3 Outsides must have same Scope for Default Route Leak Policy.
bgp-peer-profile-conflict 0x1000000000ull Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides.
dest-is-member-of-pc-or-vpc 0x100000000ull SPAN Destination Cannot be PC or VPC Member SPAN validations
ip-address-already-in-use 0x10000000ull IP Address Already in Use IP-Address already in use
accEncap-existing-on-other-tnlepg 0x2000000000000000ull AccEncap should not be same for different TnlEPGs on Core Port. Vlan Encap should be different on different TnlEPGs on same Core Port.
ipattr-already-in-use 0x200000000000000ull IP attribute already Used by another EPG IpAttr validation. an IpAttr can be used by only 1 EPg in a given l2BD
tnlepg-port-mode-mismatch 0x20000000000000ull Port mode should be set to tunnel for Tunnel deployment. Port mode should be set to tunnel before TnlEPG deployment.
interleak-policy-conflict 0x2000000000000ull Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
dns-not-supported-on-spine-inb 0x200000000000ull Inband DNS resolution not supported on spines. DNS on inb epg is not supported on spine.
multiple-dom-vnid-conflict 0x20000000000ull Multiple domains VNID conflict multiple domain VNID conflict
router-id-conflict 0x2000000000ull Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides.
filter-entry-protocol-not-supported 0x200000000ull Filter Entry Unsupported Protocol Value Filter validations
invalid-ep-selection 0x20000000ull Spine Cannot Be Selected For this EP Invalid EP selection
bgpProt-policy-already-existing 0x4000000000000000ull A specific leaf node can hold only a single bgpProtP config; this fault is raised when inconsistent configuration is detected A specific leaf node can hold only a single bgpProtP config, this fault is raised when inconsistent configuration is detected
Cdp-tunneling-with-cdp-enabled-interface 0x400000000000000ull CDP on tunnel interface is not allowed when protocol mask is set to CDP This fault is raised when you enable CDP on a Tunnel Interface, on which CDP tunneling mask is already enabled
tnlepg-existing-on-port 0x40000000000000ull Only one Tunnel can be deployed on an edge port. Only one TnlEPG can be set on a port.
rtctrl-enforce-policy-conflict 0x4000000000000ull Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
IP-EPG-not-applicable-to-L2-only-BD 0x400000000000ull IP based EPG not applicable to L2 only BD. IP based EPG is not applicable to L2 only BD.
l3out-config-conflict 0x40000000000ull Operational interface parameters cannot be different (e.g. MTU) from different deployments under a context For a given port, catch and report conflicting properties coming from different l3outs
ospf-area-id-conflict 0x4000000000ull Same OSPF Area for Context(VRF) Deployed on the Node from Different Outsides Same OSPF Area for Context(VRF) Deployed on the Node from Different L3 Outsides.
rule-id-allocation-failed 0x400000000ull Rule ID Cannot Be Allocated rule id allocation exhausted
path-wiring-issues 0x40000000ull Path Wiring Issues Path has wiring issues The path (port/port-channel) getting referred has wiring-issues, which means the link is not connected to a supported peer.
multiple-mgmt-epg 0x4000000ull Multiple Management EPGs Configured For Node Multiple managment EPgs configured
qinq-doubleEncap-port-with-regular-epgs-having-regular-encap 0x8000000000000000ull EPgs with regular encaps cannot be deployed if the port mode is Double-Encap port mode Regular EPgs with regular encaps cannot be deployed if the port mode is Double-Encap port mode
Lldp-tunneling-with-lldp-enabled-interface 0x800000000000000ull LLDP on tunnel interface is not allowed when protocol mask is set to LLDP This fault is raised when you enable LLDP on a Tunnel Interface, on which LLDP tunneling mask is already enabled
Tnlport-with-regularEPGs 0x80000000000000ull Regular EPgs,l2Outs,L3outs cannot be deployed on the edge ports. Port mode change to tunnel not allowed if regular EPGs exist on the port.
dampening-policy-conflict 0x8000000000000ull Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
Qos-Policy-not-supported-for-IP-EPG 0x800000000000ull QoS Policy not supported for IP based EPG. Custom QoS Policy not supported for IP based EPG.
eigrp-multiple-out-conflict 0x80000000000ull EIGRP cannot be deployed on the same node and same context from multiple L3 Outsides For a given context(VRF) on the same Node, EIGRP cannot be enabled on more than one L3 Outside.
ospf-role-conflict 0x8000000000ull OSPF have Different roles for Context(VRF) Deployed on the Node from Different L3 Outsides For Given Context(VRF) OSPF cannot be supporting protocol for BGP for one L3 Outside and Main protocol for some other L3 Outside on the same Node.
duplicate-encap 0x800000000ull Encap Is Already In Use. duplicate encap present on node.
l3port-and-sub-interface-on-path 0x80000000ull L3 Port and Sub-Interface Not Allowed on Same Path L3 Port and Sub-Interface are not allowed on the same path Under a Layer3 Outside, a pure layer3 port and sub-interface configurations are not allowed on the same port.
dhcp-provider-is-not-reachable 0x8000000ull DHCP Provider Not Reachable DHCP provider is not reachable
port-configured-for-fex 1024ull Interface Configured For FEX Port is configured as fex-fabric The path (i.e. port/port-channel) is currently getting used for attaching a FEX. Please check the Fex Profile (infra:FexP) and the port-selectors (infra:HPortS) associated to it.
invalid-exception-mask-for-subnet 1048576ull Exception Subnet Mask Must Be More Specific than Subnet Mask Route Control - L3 External Subnet/Exception validation
port-part-of-port-channel 128ull Port is Member of Port Channel Path is not available The configuration is directly referring to a port which is part of a port-channel. Such configurations may affect the behavior of the port-channel and hence are not allowed. Configuration should refer to the Access-Bundle-Group (infra:AccBndlGrp) directly.
missing-dhcp-lbl-for-infra 131072ull Infra DHCP relay profile is missing corresponding DHCP label DHCP validations
multiple-external-encap 16384ull Only One External Encap Allowed on Bridge Domain External Encap Validations A Bridge Domain (fv:BD) can be extended outside the fabric using only one external encap per node. Check the Layer 2 Outside configuration.
path-is-out-of-service 16777216ull Path Out of Service Path is Out of Service The path (port/port-channel) getting referred is marked Out-of-Service. Check the Out Of Service Policy (fabric:OOServicePol)
vxlan-capacity 16ull Insufficient VXLANs Available Not enough VXLANs available Check the total number of EPgs, BDs, VRFs etc. confgigurations which use a VXLAN Id. There total should not exceed the number of VXLANs supported.
bd-not-present 1ull BD Not Present BD Validations BD is not present on the node. Following issues are possible: 1. This could be a temporary issue as the BD could be in the process of getting pushed to the node. 2. If the EPg is associated with a default BD then check the Connectivity Instrumentation Policy.
port-configured-for-apic 2048ull Port Connected to Controller Port is configured for apic The path (i.e. port/port-channel) is currently getting used for APIC connection, hence no configurations are allowed on it which may bring down the connectivity with APIC
prefix-entry-already-in-use 2097152ull Prefix Entry Already Used in Another EPG Prefix Entry validation Under a Ctx (fvCtx aka VRF), a subnet can belong to only one external EPg at a time. Please check your external network instance profiles (l3ext:InstP) under the Layer3 Outside configurations.
port-configured-as-l3 256ull Interface Configured as L3 Path is configured as l3 The path (i.e. port/port-channel) is currently getting used by some configurations (example L3 Outside) which need the port to be configured as a Layer-3 port.
inconsistent-ibgp-peer-as-number 262144ull Inconsistent iBGP Peer AS number provided BGP Peer AS validations
context-not-present 2ull VRF Not Present Context Validations VRF is not present on the node. Following issues are possible: 1. This could be a temporary issue as the VRF could be in the process of getting pushed to the node. 2. If the EPg is associated with a default VRF then check the Connectivity Instrumentation Policy.
ip-address-not-present 32768ull IP Address Not Present IP-Address Validations
vrf-capacity 32ull Insufficient VRFs Available Not enough VRFs available Check the total number of Ctx(aka VRF) deployed on the node. The total should not exceed the number of VRF supported by the node.
invalid-vlan 33554432ull Invalid VLAN Configuration Invalid VLAN Configuration The domain associated with the EPg is not allowed to use the specified encap. Check the Attachable Profile, and VLAN/VXLAN Namespace (fvns:VlanInstP and fvns:VxlanInstP) configurations associated with the domain.
port-channel-capacity 4096ull Insufficient Port Channels Available Not enough port-channels available Check the total number of Access Bundle Groups (i.e. infra:AccBndlGrp) deployed on the node. The total number of port-channles created by the Access Bundle Groups should not exceed the total number of port-channels supported by the node.
encap-already-in-use 4194304ull Encap Already Used in Another EPG Encap validation On a node, an encap (VLAN or VXLAN) can be used by only 1 EPg or BD at a time.
insufficient-resources 4ull Insufficient Resources overall there are not enough resources
port-configured-as-l2 512ull Interface Configured as L2 Port is configured as l2 The path (i.e. port/port-channel) is currently getting used by some configurations (example L2 Outside, Application EPg) which need the port to be configured as a Layer-2 port.
invalid-bgp-peer-address 524288ull BGP Peer Address Cannot Be Same as Router ID BGP Peer Address validations
invalid-path 64ull Invalid Path Configuration Path is not available Following issues are possible: 1. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) getting referred does not exist on the node. 2. The domain associated with the EPg is not allowed to use the specified path. Check the Attachable Profile configuration associated with the domain. 3. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) is deployed on FEX and is part of l2Out/l3Out. l2Out and l3Out are NOT supported on FEX
multiple-ctx-configuration 65536ull Multiple VRF configuration provided for an encap or path Conflicting VRF validations A Layer-3 interface (which could be a pure-layer3 interface or a sub-interface) can belong to only 1 Ctx (fvCtx aka VRF) at a time. For pure-layer3 interface: Please check the Layer3 Outside configuration and make sure that for a given node same path (port/port-channel) is not part of multiple Layer3 Outsides associated to different fvCtxs. For sub-interface: Please check the Layer3 Outside configuration and make sure that for a given node the same encap is not part of multiple Layer3 Outsides associated to different fvCtxs.
native-or-untagged-encap-failure 8192ull Only One Native or Untagged Encap Allowed on Interface Native/Untagged Vlan Validation You are trying to configure two different encaps as native or untagged on the path (i.e. port/port-channel). Check the "mode" type set on the relations between the EPg and the fabric:Path.
multiple-outsides-from-context-configured-for-the-same-node 8388608ull Multiple External Networks From Same Context Configured For Same Node - Deprecated Multiple Outsides from the Same Context Configured for the Same Node Please check the Layer3 Outside configurations. Fault Deprecated - It's valid now.
vlan-capacity 8ull Insufficient VLANs Available Not enough VLANs available Check the total number of EPgs and BDs deployed on the node. There total should not exceed the number of VLANs supported by the node
DEFAULT not-applicable(0ull) N/A NO COMMENTS





unresolvedStrgConfigQual

Type: fv:StorageIssues
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
not-applicable 0ull N/A NO COMMENTS
insufficient-resources 1ull insufficient-resources overall there are not enough resources
invalid-vsan 2ull Invalid VSAN Configuration Invalid VSAN Configuration The domain associated with the EPg is not allowed to use the specified encap. Check the Attachable Profile, VsanAttrP and VSAN Namespace (fvns:VsanInstP) configurations associated with the domain.
native-vsan-failure 4ull Only One Native Vsan Allowed on Interface Native/Untagged Vsan Validation You are trying to configure two different vsans as native on the path (i.e. port/port-channel). Check the "mode" type set on the relations between the EPg and the fabric:Path.
another-encap-for-bd-in-use 8ull BD is assigned another encap Vsan Encap validation If a vsan is already attached to BD, another vsan can not be attached.
encap-already-in-use 8ull Encap Already Used in Another EPG Vsan Encap validation On a node, an encap (VSAN) can be used by only 1 EPg or BD at a time.
DEFAULT not-applicable(0ull) N/A NO COMMENTS