Properties Summary |
Defined in: qos:ADppPol |
qos:DppPolAdminState
scalar:Enum8
|
adminSt (qos:ADppPol:adminSt)
The administrative state of the object or policy.
|
dpp:Burst
scalar:Uint64
|
be (qos:ADppPol:be)
Excessive burst size (2R3C policer only)
|
dpp:BurstUnit
scalar:Enum8
|
beUnit (qos:ADppPol:beUnit)
Excessive Burst unit - none, Kilo, Mega, Giga, ms, us
|
dpp:Burst
scalar:Uint64
|
burst (qos:ADppPol:burst)
A committed burst size. This is the number of packets allowed at line rate during a burst.
|
dpp:BurstUnit
scalar:Enum8
|
burstUnit (qos:ADppPol:burstUnit)
Burst unit - byte, kbyte, mbyte etc.
|
dpp:ConformRateAction
scalar:Enum8
|
conformAction (qos:ADppPol:conformAction)
Confirm action
|
dpp:CosMarkingValue
scalar:Uint16
|
conformMarkCos (qos:ADppPol:conformMarkCos)
Conform Mark cos
|
dpp:DscpMarkingValue
scalar:Uint16
|
conformMarkDscp (qos:ADppPol:conformMarkDscp)
Conform Mark Dscp
|
dpp:ExceedRateAction
scalar:Enum8
|
exceedAction (qos:ADppPol:exceedAction)
Exceed action
|
dpp:CosMarkingValue
scalar:Uint16
|
exceedMarkCos (qos:ADppPol:exceedMarkCos)
Exceed Mark cos
|
dpp:DscpMarkingValue
scalar:Uint16
|
exceedMarkDscp (qos:ADppPol:exceedMarkDscp)
Exceed Mark Dscp
|
dpp:Mode
scalar:Enum8
|
mode (qos:ADppPol:mode)
The BGP Domain mode.
|
dpp:Rate
scalar:Uint64
|
pir (qos:ADppPol:pir)
Peak rate (pir) (2R3C policer only)
|
dpp:RateUnit
scalar:Enum8
|
pirUnit (qos:ADppPol:pirUnit)
Peak Rate unit - none, Kilo, Mega, Giga
|
dpp:Rate
scalar:Uint64
|
rate (qos:ADppPol:rate)
An allowed rate. This is the committed rate at which the packets are allowed into the system (raw NTPD format).
|
dpp:RateUnit
scalar:Enum8
|
rateUnit (qos:ADppPol:rateUnit)
Rate unit - bps, kbps, mbps, packets etc.
|
dpp:Type
scalar:Enum8
|
type (qos:ADppPol:type)
The specific type of the object or component.
|
dpp:ViolateRateAction
scalar:Enum8
|
violateAction (qos:ADppPol:violateAction)
Violate action
|
dpp:CosMarkingValue
scalar:Uint16
|
violateMarkCos (qos:ADppPol:violateMarkCos)
Violate Mark cos
|
dpp:DscpMarkingValue
scalar:Uint16
|
violateMarkDscp (qos:ADppPol:violateMarkDscp)
Violate Mark Dscp
|
adminSt
Type: qos:DppPolAdminState
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
The administrative state of the object or policy.
| |
Constants |
enabled |
0 |
enabled |
NO COMMENTS
|
disabled |
1 |
disabled |
NO COMMENTS
|
DEFAULT |
disabled(1) |
disabled |
NO COMMENTS
|
|
be
Type: dpp:Burst
Primitive Type: scalar:Uint64
Like: dpp:Policer:be
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0l max: 0x7fffffff80l
Comments:
-
Excessive burst size (2R3C policer only)
| |
Constants |
unspecified |
0xffffffffffffffffull |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffffffffffffffffull) |
Unspecified |
NO COMMENTS
|
|
beUnit
Type: dpp:BurstUnit
Primitive Type: scalar:Enum8
Like: dpp:Policer:beUnit
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Excessive Burst unit - none, Kilo, Mega, Giga, ms, us
| |
Constants |
unspecified |
0 |
Bytes/Packets |
NO COMMENTS
|
kilo |
1 |
Kilo Bytes/Packets |
NO COMMENTS
|
mega |
2 |
Mega Bytes/Packets |
NO COMMENTS
|
giga |
3 |
Giga Bytes/Packets |
NO COMMENTS
|
msec |
4 |
Milli Seconds |
NO COMMENTS
|
usec |
5 |
Micro Seconds |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bytes/Packets |
NO COMMENTS
|
|
burst
Type: dpp:Burst
Primitive Type: scalar:Uint64
Like: dpp:Policer:burst
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0l max: 0x7fffffff80l
Comments:
-
A committed burst size. This is the number of packets allowed at line rate during a burst.
| |
Constants |
unspecified |
0xffffffffffffffffull |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffffffffffffffffull) |
Unspecified |
NO COMMENTS
|
|
burstUnit
Type: dpp:BurstUnit
Primitive Type: scalar:Enum8
Like: dpp:Policer:burstUnit
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Burst unit - byte, kbyte, mbyte etc.
| |
Constants |
unspecified |
0 |
Bytes/Packets |
NO COMMENTS
|
kilo |
1 |
Kilo Bytes/Packets |
NO COMMENTS
|
mega |
2 |
Mega Bytes/Packets |
NO COMMENTS
|
giga |
3 |
Giga Bytes/Packets |
NO COMMENTS
|
msec |
4 |
Milli Seconds |
NO COMMENTS
|
usec |
5 |
Micro Seconds |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bytes/Packets |
NO COMMENTS
|
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
conformAction
Type: dpp:ConformRateAction
Primitive Type: scalar:Enum8
Like: dpp:Policer:conformAction
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Confirm action
| |
Constants |
transmit |
1 |
Transmit |
NO COMMENTS
|
drop |
2 |
Drop |
NO COMMENTS
|
mark |
3 |
Mark |
NO COMMENTS
|
DEFAULT |
transmit(1) |
Transmit |
NO COMMENTS
|
|
conformMarkCos
Type: dpp:CosMarkingValue
Primitive Type: scalar:Uint16
Like: dpp:Policer:conformMarkCos
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0 max: 6
Comments:
-
Conform Mark cos
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
conformMarkDscp
Type: dpp:DscpMarkingValue
Primitive Type: scalar:Uint16
Like: dpp:Policer:conformMarkDscp
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0 max: 63
Comments:
-
Conform Mark Dscp
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
descr
Type: naming:Descr
Primitive Type: string:Basic
Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "128"
Allowed Chars:
Regex: [a-zA-Z0-9\\!#$%()*,-./:;@ _{|}~?&+]+
Comments:
-
Specifies a description of the policy definition.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
exceedAction
Type: dpp:ExceedRateAction
Primitive Type: scalar:Enum8
Like: dpp:Policer:exceedAction
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Exceed action
| |
Constants |
transmit |
1 |
Transmit |
NO COMMENTS
|
drop |
2 |
Drop |
NO COMMENTS
|
mark |
3 |
Mark |
NO COMMENTS
|
DEFAULT |
drop(2) |
Drop |
NO COMMENTS
|
|
exceedMarkCos
Type: dpp:CosMarkingValue
Primitive Type: scalar:Uint16
Like: dpp:Policer:exceedMarkCos
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0 max: 6
Comments:
-
Exceed Mark cos
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
exceedMarkDscp
Type: dpp:DscpMarkingValue
Primitive Type: scalar:Uint16
Like: dpp:Policer:exceedMarkDscp
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0 max: 63
Comments:
-
Exceed Mark Dscp
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
mode
Type: dpp:Mode
Primitive Type: scalar:Enum8
Like: dpp:Policer:mode
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
The BGP Domain mode.
| |
Constants |
bit |
1 |
Bit policer |
NO COMMENTS
|
packet |
2 |
Packet Policer |
NO COMMENTS
|
DEFAULT |
bit(1) |
Bit policer |
NO COMMENTS
|
|
name
Type: naming:Name
Primitive Type: string:Basic
Overrides:naming:NamedObject:name
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "64"
Allowed Chars:
Regex: [a-zA-Z0-9_.:-]+
Comments:
-
null
nameAlias
Type: naming:NameAlias
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "63"
Allowed Chars:
Regex: [a-zA-Z0-9_.-]+
Comments:
-
NO COMMENTS
ownerKey
Type: naming:Descr
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "128"
Allowed Chars:
Regex: [a-zA-Z0-9\\!#$%()*,-./:;@ _{|}~?&+]+
Comments:
-
The key for enabling clients to own their data for entity correlation.
ownerTag
Type: naming:Descr
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: "0" max: "64"
Allowed Chars:
Regex: [a-zA-Z0-9\\!#$%()*,-./:;@ _{|}~?&+]+
Comments:
-
A tag for enabling clients to add their own data. For example, to indicate who created this object.
pir
Type: dpp:Rate
Primitive Type: scalar:Uint64
Like: dpp:Policer:pir
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0l max: 0x3fffffffc00l
Comments:
-
Peak rate (pir) (2R3C policer only)
pirUnit
Type: dpp:RateUnit
Primitive Type: scalar:Enum8
Like: dpp:Policer:pirUnit
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Peak Rate unit - none, Kilo, Mega, Giga
| |
Constants |
unspecified |
0 |
Bits/Packets per second |
NO COMMENTS
|
kilo |
1 |
Kilo Bits/Packets per second |
NO COMMENTS
|
mega |
2 |
Mega Bits/Packets per second |
NO COMMENTS
|
giga |
3 |
Giga Bits/Packets per second |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bits/Packets per second |
NO COMMENTS
|
|
rate
Type: dpp:Rate
Primitive Type: scalar:Uint64
Like: dpp:Policer:rate
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0l max: 0x3fffffffc00l
Comments:
-
An allowed rate. This is the committed rate at which the packets are allowed into the system (raw NTPD format).
rateUnit
Type: dpp:RateUnit
Primitive Type: scalar:Enum8
Like: dpp:Policer:rateUnit
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Rate unit - bps, kbps, mbps, packets etc.
| |
Constants |
unspecified |
0 |
Bits/Packets per second |
NO COMMENTS
|
kilo |
1 |
Kilo Bits/Packets per second |
NO COMMENTS
|
mega |
2 |
Mega Bits/Packets per second |
NO COMMENTS
|
giga |
3 |
Giga Bits/Packets per second |
NO COMMENTS
|
DEFAULT |
unspecified(0) |
Bits/Packets per second |
NO COMMENTS
|
|
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|
type
Type: dpp:Type
Primitive Type: scalar:Enum8
Like: dpp:Policer:type
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
The specific type of the object or component.
| |
Constants |
1R2C |
1 |
1 Rate 2 Color |
NO COMMENTS
|
2R3C |
2 |
2 Rate 3 Color |
NO COMMENTS
|
DEFAULT |
1R2C(1) |
1 Rate 2 Color |
NO COMMENTS
|
|
violateAction
Type: dpp:ViolateRateAction
Primitive Type: scalar:Enum8
Like: dpp:Policer:violateAction
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Comments:
-
Violate action
| |
Constants |
transmit |
1 |
Transmit |
NO COMMENTS
|
drop |
2 |
Drop |
NO COMMENTS
|
mark |
3 |
Mark |
NO COMMENTS
|
DEFAULT |
drop(2) |
Drop |
NO COMMENTS
|
|
violateMarkCos
Type: dpp:CosMarkingValue
Primitive Type: scalar:Uint16
Like: dpp:Policer:violateMarkCos
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0 max: 6
Comments:
-
Violate Mark cos
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|
violateMarkDscp
Type: dpp:DscpMarkingValue
Primitive Type: scalar:Uint16
Like: dpp:Policer:violateMarkDscp
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
Range: min: 0 max: 63
Comments:
-
Violate Mark Dscp
| |
Constants |
unspecified |
0xffff |
Unspecified |
NO COMMENTS
|
DEFAULT |
unspecified(0xffff) |
Unspecified |
NO COMMENTS
|
|