Class mgmt:InB (CONCRETE)

Class ID:2194
Class Label: In-Band Management EPg
Encrypted: false - Exportable: true - Persistent: true - Configurable: true - Subject to Quota: Disabled - Abstraction Layer: Logical Model
Write Access: [admin, tenant-connectivity-mgmt, tenant-epg, tenant-network-profile]
Read Access: [aaa, access-connectivity-l1, access-connectivity-l2, access-connectivity-l3, access-connectivity-mgmt, admin, fabric-connectivity-l3, fabric-protocol-mgmt, nw-svc-device, nw-svc-policy, tenant-connectivity-l2, tenant-connectivity-l3, tenant-connectivity-mgmt, tenant-connectivity-util, tenant-epg, tenant-ext-connectivity-l3, tenant-network-profile, tenant-protocol-l2, tenant-protocol-l3, tenant-security, vmm-policy]
Creatable/Deletable: yes (see Container Mos for details)
Semantic Scope: EPG
Semantic Scope Evaluation Rule: Explicit
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: true, HasFaults: true, HasHealth: true, HasEventRules: false ]

The in-band management endpoint group consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band management zone. The allocated IP address is then configured as the in-band management access IP address on the corresponding node. Any host that is part of another endpoint group can communicate with the nodes in the in-band management endpoint group using contacts.

Naming Rules
RN FORMAT: inb-{name}

    [1] PREFIX=inb- PROPERTY = name




DN FORMAT: 

[1] uni/tn-{name}/mgmtp-{name}/inb-{name}

                


Diagram

Super Mo: fv:EPg,
Container Mos: mgmt:MgmtP (deletable:yes),
Contained Mos: fv:CtrctCtxDefCont, fv:OrchsInfo, fv:RInfoHolder, fv:SharedService, fv:Subnet, fv:UpdateContract, health:NodeInst, orchs:LDevVipCfg, tag:AInst, tag:Annotation, tag:Tag, telemetry:MatchedSelector, vns:ACCfg, vns:SvcPol, vz:ConsCtrctLbl, vz:ConsLbl, vz:ConsSubjLbl, vz:ProvCtrctLbl, vz:ProvLbl, vz:ProvSubjLbl,
Relations From: file:ARemoteHost, vns:Chassis, span:ADest, vns:ALDev, vns:DevMgr, snmp:ClientGrpP, netflow:AExporterPol, dbgac:FromEpgCmn, infra:AFunc, vns:LIfCtx, vmm:CtrlrP, datetime:NtpProv, dns:Profile, dhcp:RelayP, aaa:AProvider, span:ASrc, dnsepg:ASvrGrp, vns:ATerm, dbgac:ToEpgCmn, dbgac:EpgToEpg, vns:VEpg, span:VSrcDef, mgmt:InBZone, telemetry:VipP, telemetry:FlowCollectorP,
Relations To: vz:BrCP, vz:CPIf, qos:CustomPol, vz:Taboo, fabric:Node, fv:BD,
Relations: fv:RsCons, fv:RsConsIf, fv:RsCustQosPol, fv:RsIntraEpg, fv:RsProtBy, fv:RsProv, fv:RsSecInherited, fv:RtARemoteHostToEpg, fv:RtChassisEpg, fv:RtDestEpg, fv:RtDevEpg, fv:RtDevMgrEpg, fv:RtEpg, fv:RtExporterToEPg, fv:RtFromAbsEpg, fv:RtFuncToEpg, fv:RtLIfCtxToInstP, fv:RtMgmtEPg, fv:RtNtpProvToEpg, fv:RtProfileToEpg, fv:RtProv, fv:RtSecInherited, fv:RtSecProvToEpg, fv:RtSrcToEpg, fv:RtSvcMgmtEpg, fv:RtSvrEpg, fv:RtTermToEPg, fv:RtToAbsEpg, fv:RtToAbsEpgForEpgToEpg, fv:RtVConnToEpgEp, fv:RtVConnToEpgSubnet, fv:RtVsrcToEpg, mgmt:RsInBStNode, mgmt:RsMgmtBD, mgmt:RtInB, mgmt:RtInbEpg, mgmt:RtToInbEpg, mgmt:RtToInbandEpg,


Containers Hierarchies
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] fabric:Topology The root for IFC topology.
 
 ├
[V] fabric:Pod A pod.
 
 
 ├
[V] fabric:Node The root node for the APIC.
 
 
 
 ├
[V] ctx:Local The local Context.
 
 
 
 
 ├
[V] ctx:Application The context application.
 
 
 
 
 
 ├
[V] pol:Uni Represents policy definition/resolution universe.
 
 
 
 
 
 
 ├
[V] fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.
 
 
 
 
 
 
 
 ├
[V] mgmt:MgmtP The in-band and out-of-band management endpoint groups consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band or out-of-band management zone.
 
 
 
 
 
 
 
 
 ├
[V] mgmt:InB The in-band management endpoint group consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band management zone. The allocated IP address is then configured as the in-band management access IP address on the corresponding node. Any host that is part of another endpoint group can communicate with the nodes in the...
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] pol:Uni Represents policy definition/resolution universe.
 
 ├
[V] fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.
 
 
 ├
[V] mgmt:MgmtP The in-band and out-of-band management endpoint groups consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band or out-of-band management zone.
 
 
 
 ├
[V] mgmt:InB The in-band management endpoint group consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band management zone. The allocated IP address is then configured as the in-band management access IP address on the corresponding node. Any host that is part of another endpoint group can communicate with the nodes in the...


Contained Hierarchy
[V] mgmt:InB The in-band management endpoint group consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band management zone. The allocated IP address is then configured as the in-band management access IP address on the corresponding node. Any host that is part of another endpoint group can communicate with the nodes in the...
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fv:CtrctCtxDefCont An internal container for objects used for deployment.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] fv:OrchsInfo The orchestration information is used to store orchestration specific properties such as Microsoft Azure Pack.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:OptedPlanSrvc 
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:OrchsLBCfg 
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RInfoHolder An internal object for filtering security rules.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] fv:RsCons The Consumer contract profile information.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:CollectionCont The collection container.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 
 ├
[V] vz:ConsLbl A label used by consumers to filter the providers. The label can be parented as follows: By the consumer endpoint group. By the relation between the consumer endpoint group and contract. By the relation between the contract interface and contract. By the relation between the consumer endpoint group and contract interface. A consumer with no label will consume from all the providers of the contract with no labels. A consumer with a specific label...
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] vz:ConsSubjLbl A consumer subject label. In general, a subject label is used as a classification criteria for subjects being consumed/provided by the endpoint groups (EPGs) participating in the contract. The label identifies a subject being consumed by a consumer. It can be parented by 2 different methods. The first method is the relation between the consumer EPG and the contract that is used for filtering the subjects. A label should match either the subject n...
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RsConsIf A contract for which the EPG will be a consumer.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 
 ├
[V] vz:ConsLbl A label used by consumers to filter the providers. The label can be parented as follows: By the consumer endpoint group. By the relation between the consumer endpoint group and contract. By the relation between the contract interface and contract. By the relation between the consumer endpoint group and contract interface. A consumer with no label will consume from all the providers of the contract with no labels. A consumer with a specific label...
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] vz:ConsSubjLbl A consumer subject label. In general, a subject label is used as a classification criteria for subjects being consumed/provided by the endpoint groups (EPGs) participating in the contract. The label identifies a subject being consumed by a consumer. It can be parented by 2 different methods. The first method is the relation between the consumer EPG and the contract that is used for filtering the subjects. A label should match either the subject n...
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RsCustQosPol A source relation to a custom QoS policy that enables different levels of service to be assigned to network traffic, including specifications for the Differentiated Services Code Point (DSCP) value(s) and the 802.1p Dot1p priority. This is an internal object.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RsIntraEpg  Intra EPg contract: Represents that the EPg is moving from "allow all within epg" mode to a "deny all within epg" mode. The only type of traffic allowed between EPs in this EPg is the one specified by contracts EPg associates to with this relation.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:CollectionCont The collection container.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RsProtBy The taboo contract for which the EPG will be a provider and consumer.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:TabooCtxDefCont An internal container for objects used for deployment.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RsProv A contract for which the EPG will be a provider.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:CollectionCont The collection container.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 
 ├
[V] vz:ProvLbl A label used by a provider for specifying its identity. The parent can be either the provider endpoint group or the relation between the provider endpoint group and a contract. A consumer with no label will consume from all the providers of the contract regardless of the provider label. A consumer with a specific label can only consume from providers matching the label.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] vz:ProvSubjLbl A subject label is used as classification criteria for subjects being consumed/provided by the endpoint groups (EPGs) participating in the contract. The label identifies a subject being provided by a provider. It can be parented by 2 different methods. The first method is the relation between the provider EPG and the contract that is used for filtering the subjects. A label should match either the subject name or the label present under the subje...
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RsSecInherited  Represents that the EPg is inheriting security configuration from another EPg
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fv:RtARemoteHostToEpg A target relation to teh abstract representation of the resolvable endpoint profile. This is an internal object.
 ├
[V] fv:RtChassisEpg A target relation to a set of endpoints.
 ├
[V] fv:RtDestEpg A target relation to a set of endpoints. This is an internal object.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] fv:RtDevEpg A target relation to an endpoint. This is an internal object.
 ├
[V] fv:RtDevMgrEpg 
 ├
[V] fv:RtEpg A target relation to an attachable target group. This is an internal object.
 ├
[V] fv:RtExporterToEPg  Points to the EPg behind which the Netflow Exporter Resides
 ├
[V] fv:RtFromAbsEpg 
 ├
[V] fv:RtFuncToEpg A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:RtLIfCtxToInstP 
 ├
[V] fv:RtMgmtEPg A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:RtNtpProvToEpg A target relation to an attachable target group. This is an internal object.
 ├
[V] fv:RtProfileToEpg An attachable target group. This is an internal object.
 ├
[V] fv:RtProv A target relation to a set of requirements for the application-level endpoint group instance. This is an internal object.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] fv:RtSecInherited  Represents that the EPg is inheriting security configuration from another EPg
 ├
[V] fv:RtSecProvToEpg A target relation to an attachable target group. This is an internal object.
 ├
[V] fv:RtSrcToEpg A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:RtSvcMgmtEpg A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:RtSvrEpg 
 ├
[V] fv:RtTermToEPg A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:RtToAbsEpg 
 ├
[V] fv:RtToAbsEpgForEpgToEpg  Rel Def to Dst. EPG (Abstract super class of EPG)
 ├
[V] fv:RtVConnToEpgEp A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:RtVConnToEpgSubnet A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:RtVsrcToEpg A target relation to a set of endpoints. This is an internal object.
 ├
[V] fv:SharedService When an EPG contains this object, its pcTag is allocated from Shared.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fv:CtxSharedServiceUpdate  An object to trigger Ctx update tasks @@@ If InstP is in shared service mode and it has @@@ 0/0 Subnet, its VRF must have a global pcTag
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] vz:CreatedBy A container that captures information about the creator of an object.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] fv:Subnet A subnet defines the IP address range that can be used within the bridge domain. While a context defines a unique layer 3 space, that space can consist of multiple subnets. These subnets are defined per bridge domain. A bridge domain can contain multiple subnets, but a subnet is contained within a single bridge domain.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] fv:CepNetCfgPol  Represents Client End Point network configuration policy, Used this information for Microsoft SCVMM/Azure application to create SCVMM static IP pool
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:EpAnycast 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:EpReachability 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] ip:NexthopEpP 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:RsBDSubnetToOut A source relation to the L3 routed outside network.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:RsBDSubnetToProfile The external networks that are routed via Layer 3 networks outside the fabric that are reachable by a tenant's applications. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] fv:RsNdPfxPol The neighbor discovery prefix policy.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fv:UpdateContract  If EPg pcTag gets allocated in postExplicit, there might be a race condition since contract updates happens in postExplicit as well (which might cause contract shard to be updated with wrong pcTag)
 ├
[V] health:Inst A base class for a health score instance.
 ├
[V] health:NodeInst The health score instance calculated on a node and reported to appliance.
 ├
[V] mgmt:RsInBStNode 
 
 ├
[V] mgmt:Ip  Secondary interface connection parameters
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] mgmt:RsMgmtBD A source relation to the management bridge domain.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] mgmt:RtInB  Relationship to an in-band EPG
 ├
[V] mgmt:RtInbEpg A target relation to the in-band management endpoint group.
 ├
[V] mgmt:RtToInbEpg  Association with the inband epg
 ├
[V] mgmt:RtToInbandEpg  Association with the inband epg
 ├
[V] orchs:LDevVipCfg  This is used to store orchestration specific properties like Microsoft Azure Pack
 
 ├
[V] orchs:LDevVipAttr 
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] tag:AInst The label instance, which is contained by the taggable object.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] tag:Annotation 
 ├
[V] tag:Tag 
 ├
[V] telemetry:MatchedSelector 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] vns:ACCfg Contains a hierarchy of folders and parameters similar to AMItem.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] vns:RsCfgToConn A source relation to a connector. Note that this relation is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] vns:RsCfgToVConn A source relation to a virtual connector. Note that this relation is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] vns:SvcPol 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 
 ├
[V] vns:FolderInst A folder instance configured by the administrator.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] vns:CfgRelInst A folder instance configured by the administrator.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] vns:ConfIssue 
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] vns:RsCfgToConn A source relation to a connector. Note that this relation is an internal object.
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] vns:RsCfgToVConn A source relation to a virtual connector. Note that this relation is an internal object.
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] vns:ConfIssue 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] vns:ParamInst A parameter instance configured by the administrator.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] vns:ConfIssue 
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] vns:RsCfgToConn A source relation to a connector. Note that this relation is an internal object.
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] vns:RsCfgToVConn A source relation to a virtual connector. Note that this relation is an internal object.
 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] vns:RsCfgToConn A source relation to a connector. Note that this relation is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] vns:RsCfgToVConn A source relation to a virtual connector. Note that this relation is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] vns:RsFolderInstToMFolder A source relation to an MFolder path.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] vns:RsScopeToTerm A source relation to contract terminal node for parameter resolution. Note that this relation is an internal object.
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] vns:RtFolderInstAtt A target relation to a folder instance configured by the administrator. Note that this relation is an internal object.
 ├
[V] vz:ConsCtrctLbl A consumer contract label. A contract label can be parented by the relation between an endpoint group (EPG) and security group. The EPG is associated with a group and lists all contracts it provides out of the group, as well as, optionally, contracts that it chooses to consume. If no consumption contracts are indicated, all contracts are consumed. If no provider contracts are identified, the EPG provides no contracts out of this group.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] vz:ConsLbl A label used by consumers to filter the providers. The label can be parented as follows: By the consumer endpoint group. By the relation between the consumer endpoint group and contract. By the relation between the contract interface and contract. By the relation between the consumer endpoint group and contract interface. A consumer with no label will consume from all the providers of the contract with no labels. A consumer with a specific label...
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] vz:ConsSubjLbl A consumer subject label. In general, a subject label is used as a classification criteria for subjects being consumed/provided by the endpoint groups (EPGs) participating in the contract. The label identifies a subject being consumed by a consumer. It can be parented by 2 different methods. The first method is the relation between the consumer EPG and the contract that is used for filtering the subjects. A label should match either the subject n...
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] vz:ProvCtrctLbl A label identifying a contract. A contract label can be parented by the relation between an endpoint group (EPG) and security group. The EPG is associated with a group and lists all contracts it provides out of the group, as well as, optionally, contracts that it chooses to consume. If no consumption contracts are indicated, all contracts are consumed. If no provider contracts are identified, the EPG provides no contracts out of this group.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] vz:ProvLbl A label used by a provider for specifying its identity. The parent can be either the provider endpoint group or the relation between the provider endpoint group and a contract. A consumer with no label will consume from all the providers of the contract regardless of the provider label. A consumer with a specific label can only consume from providers matching the label.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] vz:ProvSubjLbl A subject label is used as classification criteria for subjects being consumed/provided by the endpoint groups (EPGs) participating in the contract. The label identifies a subject being provided by a provider. It can be parented by 2 different methods. The first method is the relation between the provider EPG and the contract that is used for filtering the subjects. A label should match either the subject name or the label present under the subje...
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 


Inheritance
[V] naming:NamedObject An abstract base class for an object that contains a name.
 ├
[V] pol:Obj Represents a generic policy object.
 
 ├
[V] pol:Comp Represents a policy component. This object is part of the policy definition.
 
 
 ├
[V] fv:Comp An abstraction of the fabric virtualization policy definition.
 
 
 
 ├
[V] fv:ATg Base class for the Attachable Target Group
 
 
 
 
 ├
[V] fv:EPg A set of endpoints.
 
 
 
 
 
 ├
[V] mgmt:InB The in-band management endpoint group consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band management zone. The allocated IP address is then configured as the in-band management access IP address on the corresponding node. Any host that is part of another endpoint group can communicate with the nodes in the...


Stat Counters
scalar:Uint32 GAUGE: fv:FltCounter:warncount(count)
           warning Fault
          Comments: NO COMMENTS
scalar:Uint32 GAUGE: fv:FltCounter:mincount(count)
           minor Fault
          Comments: NO COMMENTS
scalar:Uint32 GAUGE: fv:FltCounter:majcount(count)
           major Fault
          Comments: NO COMMENTS
scalar:Uint32 GAUGE: fv:FltCounter:critcount(count)
           critical Fault
          Comments: Fault Counter
scalar:Uint64 COUNTER: l2:EgrBytes:multicast(bytes)
           egress multicast bytes
          Comments: Egress multicast bytes
scalar:Uint64 COUNTER: l2:EgrBytes:unicast(bytes)
           egress unicast bytes
          Comments: Egress unicast bytes
scalar:Uint64 COUNTER: l2:EgrPkts:multicast(packets)
           egress multicast packets
          Comments: Egress multicast packets
scalar:Uint64 COUNTER: l2:EgrPkts:unicast(packets)
           egress unicast packets
          Comments: Egress unicast packets
scalar:Uint64 COUNTER: l2:IngrBytes:drop(bytes)
           ingress drop bytes
          Comments: Ingress drop bytes
scalar:Uint64 COUNTER: l2:IngrBytes:flood(bytes)
           ingress flood bytes
          Comments: Ingress flood bytes
scalar:Uint64 COUNTER: l2:IngrBytes:multicast(bytes)
           ingress multicast bytes
          Comments: Ingress multicast bytes
scalar:Uint64 COUNTER: l2:IngrBytes:unicast(bytes)
           ingress unicast bytes
          Comments: Ingress unicast bytes
scalar:Uint64 COUNTER: l2:IngrPkts:drop(packets)
           ingress drop packets
          Comments: Ingress drop packets
scalar:Uint64 COUNTER: l2:IngrPkts:flood(packets)
           ingress flood packets
          Comments: Ingress flood packets
scalar:Uint64 COUNTER: l2:IngrPkts:multicast(packets)
           ingress multicast packets
          Comments: Ingress multicast packets
scalar:Uint64 COUNTER: l2:IngrPkts:unicast(packets)
           ingress unicast packets
          Comments: Ingress unicast packets


Stats
[V] mgmt:InB The in-band management endpoint group consists of switches (leaves/spines) and APICs. Each node in the group is assigned an IP address that is dynamically allocated from the address pool associated with the corresponding in-band management zone. The allocated IP address is then configured as the in-band management access IP address on the corresponding node. Any host that is part of another endpoint group can communicate with the nodes in the...
 ├
[V] fv:FltCounter15min A class that represents the most current statistics for Fault Counter in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] fv:FltCounter1d A class that represents the most current statistics for Fault Counter in a 1 day sampling interval. This class updates every hour.
 ├
[V] fv:FltCounter1h A class that represents the most current statistics for Fault Counter in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] fv:FltCounter1mo A class that represents the most current statistics for Fault Counter in a 1 month sampling interval. This class updates every day.
 ├
[V] fv:FltCounter1qtr A class that represents the most current statistics for Fault Counter in a 1 quarter sampling interval. This class updates every day.
 ├
[V] fv:FltCounter1w A class that represents the most current statistics for Fault Counter in a 1 week sampling interval. This class updates every day.
 ├
[V] fv:FltCounter1year A class that represents the most current statistics for Fault Counter in a 1 year sampling interval. This class updates every day.
 ├
[V] fv:FltCounter5min A class that represents the most current statistics for Fault Counter in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] fv:FltCounterHist15min A class that represents historical statistics for Fault Counter in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] fv:FltCounterHist1d A class that represents historical statistics for Fault Counter in a 1 day sampling interval. This class updates every hour.
 ├
[V] fv:FltCounterHist1h A class that represents historical statistics for Fault Counter in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] fv:FltCounterHist1mo A class that represents historical statistics for Fault Counter in a 1 month sampling interval. This class updates every day.
 ├
[V] fv:FltCounterHist1qtr A class that represents historical statistics for Fault Counter in a 1 quarter sampling interval. This class updates every day.
 ├
[V] fv:FltCounterHist1w A class that represents historical statistics for Fault Counter in a 1 week sampling interval. This class updates every day.
 ├
[V] fv:FltCounterHist1year A class that represents historical statistics for Fault Counter in a 1 year sampling interval. This class updates every day.
 ├
[V] fv:FltCounterHist5min A class that represents historical statistics for Fault Counter in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:EgrBytesAg15min Egress byte. A class that represents the most current aggregated statistics for egress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrBytesAg1d Egress byte. A class that represents the most current aggregated statistics for egress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrBytesAg1h Egress byte. A class that represents the most current aggregated statistics for egress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrBytesAg1mo Egress byte. A class that represents the most current aggregated statistics for egress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesAg1qtr Egress byte. A class that represents the most current aggregated statistics for egress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesAg1w Egress byte. A class that represents the most current aggregated statistics for egress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesAg1year Egress byte. A class that represents the most current aggregated statistics for egress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesAgHist15min Egress byte. A class that represents historical aggregated statistics for egress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrBytesAgHist1d Egress byte. A class that represents historical aggregated statistics for egress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrBytesAgHist1h Egress byte. A class that represents historical aggregated statistics for egress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrBytesAgHist1mo Egress byte. A class that represents historical aggregated statistics for egress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesAgHist1qtr Egress byte. A class that represents historical aggregated statistics for egress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesAgHist1w Egress byte. A class that represents historical aggregated statistics for egress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesAgHist1year Egress byte. A class that represents historical aggregated statistics for egress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPart15min Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrBytesPart1d Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrBytesPart1h Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrBytesPart1mo Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPart1qtr Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPart1w Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPart1year Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPart5min Egress byte. A class that represents the most current portion of the statistics for egress bytes in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:EgrBytesPartHist15min Egress byte. A class that represents historical portion of the statistics for egress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrBytesPartHist1d Egress byte. A class that represents historical portion of the statistics for egress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrBytesPartHist1h Egress byte. A class that represents historical portion of the statistics for egress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrBytesPartHist1mo Egress byte. A class that represents historical portion of the statistics for egress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPartHist1qtr Egress byte. A class that represents historical portion of the statistics for egress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPartHist1w Egress byte. A class that represents historical portion of the statistics for egress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPartHist1year Egress byte. A class that represents historical portion of the statistics for egress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrBytesPartHist5min Egress byte. A class that represents historical portion of the statistics for egress bytes in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:EgrPktsAg15min Egress packet. A class that represents the most current aggregated statistics for egress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrPktsAg1d Egress packet. A class that represents the most current aggregated statistics for egress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrPktsAg1h Egress packet. A class that represents the most current aggregated statistics for egress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrPktsAg1mo Egress packet. A class that represents the most current aggregated statistics for egress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsAg1qtr Egress packet. A class that represents the most current aggregated statistics for egress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsAg1w Egress packet. A class that represents the most current aggregated statistics for egress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsAg1year Egress packet. A class that represents the most current aggregated statistics for egress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsAgHist15min Egress packet. A class that represents historical aggregated statistics for egress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrPktsAgHist1d Egress packet. A class that represents historical aggregated statistics for egress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrPktsAgHist1h Egress packet. A class that represents historical aggregated statistics for egress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrPktsAgHist1mo Egress packet. A class that represents historical aggregated statistics for egress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsAgHist1qtr Egress packet. A class that represents historical aggregated statistics for egress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsAgHist1w Egress packet. A class that represents historical aggregated statistics for egress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsAgHist1year Egress packet. A class that represents historical aggregated statistics for egress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPart15min Egress packet. A class that represents the most current portion of the statistics for egress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrPktsPart1d Egress packet. A class that represents the most current portion of the statistics for egress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrPktsPart1h Egress packet. A class that represents the most current portion of the statistics for egress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrPktsPart1mo Egress packet. A class that represents the most current portion of the statistics for egress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPart1qtr Egress packet. A class that represents the most current portion of the statistics for egress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPart1w Egress packet. A class that represents the most current portion of the statistics for egress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPart1year Egress packet. A class that represents the most current portion of the statistics for egress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPart5min Egress packet. A class that represents the most current portion of the statistics for egress packets in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:EgrPktsPartHist15min Egress packet. A class that represents historical portion of the statistics for egress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:EgrPktsPartHist1d Egress packet. A class that represents historical portion of the statistics for egress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:EgrPktsPartHist1h Egress packet. A class that represents historical portion of the statistics for egress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:EgrPktsPartHist1mo Egress packet. A class that represents historical portion of the statistics for egress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPartHist1qtr Egress packet. A class that represents historical portion of the statistics for egress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPartHist1w Egress packet. A class that represents historical portion of the statistics for egress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPartHist1year Egress packet. A class that represents historical portion of the statistics for egress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:EgrPktsPartHist5min Egress packet. A class that represents historical portion of the statistics for egress packets in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:IngrBytesAg15min A class that represents the most current aggregated statistics for ingress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrBytesAg1d A class that represents the most current aggregated statistics for ingress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrBytesAg1h A class that represents the most current aggregated statistics for ingress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrBytesAg1mo A class that represents the most current aggregated statistics for ingress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesAg1qtr A class that represents the most current aggregated statistics for ingress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesAg1w A class that represents the most current aggregated statistics for ingress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesAg1year A class that represents the most current aggregated statistics for ingress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesAgHist15min A class that represents historical aggregated statistics for ingress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrBytesAgHist1d A class that represents historical aggregated statistics for ingress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrBytesAgHist1h A class that represents historical aggregated statistics for ingress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrBytesAgHist1mo A class that represents historical aggregated statistics for ingress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesAgHist1qtr A class that represents historical aggregated statistics for ingress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesAgHist1w A class that represents historical aggregated statistics for ingress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesAgHist1year A class that represents historical aggregated statistics for ingress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPart15min A class that represents the most current portion of the statistics for ingress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrBytesPart1d A class that represents the most current portion of the statistics for ingress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrBytesPart1h A class that represents the most current portion of the statistics for ingress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrBytesPart1mo A class that represents the most current portion of the statistics for ingress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPart1qtr A class that represents the most current portion of the statistics for ingress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPart1w A class that represents the most current portion of the statistics for ingress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPart1year A class that represents the most current portion of the statistics for ingress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPart5min A class that represents the most current portion of the statistics for ingress bytes in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:IngrBytesPartHist15min A class that represents historical portion of the statistics for ingress bytes in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrBytesPartHist1d A class that represents historical portion of the statistics for ingress bytes in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrBytesPartHist1h A class that represents historical portion of the statistics for ingress bytes in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrBytesPartHist1mo A class that represents historical portion of the statistics for ingress bytes in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPartHist1qtr A class that represents historical portion of the statistics for ingress bytes in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPartHist1w A class that represents historical portion of the statistics for ingress bytes in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPartHist1year A class that represents historical portion of the statistics for ingress bytes in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrBytesPartHist5min A class that represents historical portion of the statistics for ingress bytes in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:IngrPktsAg15min A class that represents the most current aggregated statistics for ingress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrPktsAg1d A class that represents the most current aggregated statistics for ingress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrPktsAg1h A class that represents the most current aggregated statistics for ingress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrPktsAg1mo A class that represents the most current aggregated statistics for ingress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsAg1qtr A class that represents the most current aggregated statistics for ingress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsAg1w A class that represents the most current aggregated statistics for ingress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsAg1year A class that represents the most current aggregated statistics for ingress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsAgHist15min A class that represents historical aggregated statistics for ingress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrPktsAgHist1d A class that represents historical aggregated statistics for ingress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrPktsAgHist1h A class that represents historical aggregated statistics for ingress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrPktsAgHist1mo A class that represents historical aggregated statistics for ingress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsAgHist1qtr A class that represents historical aggregated statistics for ingress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsAgHist1w A class that represents historical aggregated statistics for ingress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsAgHist1year A class that represents historical aggregated statistics for ingress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPart15min A class that represents the most current portion of the statistics for ingress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrPktsPart1d A class that represents the most current portion of the statistics for ingress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrPktsPart1h A class that represents the most current portion of the statistics for ingress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrPktsPart1mo A class that represents the most current portion of the statistics for ingress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPart1qtr A class that represents the most current portion of the statistics for ingress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPart1w A class that represents the most current portion of the statistics for ingress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPart1year A class that represents the most current portion of the statistics for ingress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPart5min A class that represents the most current portion of the statistics for ingress packets in a 5 minute sampling interval. This class updates every 10 seconds.
 ├
[V] l2:IngrPktsPartHist15min A class that represents historical portion of the statistics for ingress packets in a 15 minute sampling interval. This class updates every 5 minutes.
 ├
[V] l2:IngrPktsPartHist1d A class that represents historical portion of the statistics for ingress packets in a 1 day sampling interval. This class updates every hour.
 ├
[V] l2:IngrPktsPartHist1h A class that represents historical portion of the statistics for ingress packets in a 1 hour sampling interval. This class updates every 15 minutes.
 ├
[V] l2:IngrPktsPartHist1mo A class that represents historical portion of the statistics for ingress packets in a 1 month sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPartHist1qtr A class that represents historical portion of the statistics for ingress packets in a 1 quarter sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPartHist1w A class that represents historical portion of the statistics for ingress packets in a 1 week sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPartHist1year A class that represents historical portion of the statistics for ingress packets in a 1 year sampling interval. This class updates every day.
 ├
[V] l2:IngrPktsPartHist5min A class that represents historical portion of the statistics for ingress packets in a 5 minute sampling interval. This class updates every 10 seconds.


Events
                mgmt:InB:creation__mgmt_InB
mgmt:InB:modification__mgmt_InB
mgmt:InB:deletion__mgmt_InB


Faults
                fv:ATg:configurationFailed


Fsms
                


Properties Summary
Defined in: mgmt:InB
mo:Annotation
          string:Basic
annotation  (mgmt:InB:annotation)
           NO COMMENTS
base:Encap encap  (mgmt:InB:encap)
           The in-band access encapsulation.
mo:ExtMngdByType
          scalar:Bitmask32
extMngdBy  (mgmt:InB:extMngdBy)
           NO COMMENTS
reference:BinRef monPolDn  (mgmt:InB:monPolDn)
           The monitoring policy attached to this observable object.
naming:Name
          string:Basic
name  (mgmt:InB:name)
           Overrides:fv:ATg:name | pol:Obj:name | naming:NamedObject:name
           The in-band management endpoint group name. This name can be up to 64 alphanumeric characters.
Defined in: fv:EPg
string:Basic exceptionTag  (fv:EPg:exceptionTag)
           NO COMMENTS
fv:FloodOnEncap
          scalar:Enum8
floodOnEncap  (fv:EPg:floodOnEncap)
           Control at EPG level if the traffic L2 Multicast/Broadcast and Link Local Layer should be flooded only on ENCAP or based on bridg-domain settings
vz:MatchT
          scalar:Enum8
matchT  (fv:EPg:matchT)
           The provider label match criteria.
fv:PrefGrMemb
          scalar:Enum8
prefGrMemb  (fv:EPg:prefGrMemb)
           Represents parameter used to determine if EPg is part of a group that does not a contract for communication
fv:TriggerSt
          scalar:Enum8
triggerSt  (fv:EPg:triggerSt)
          
scalar:Uint64 txId  (fv:EPg:txId)
           The identifier of the transaction in which the user action occurred.
Defined in: fv:ATg
fv:ConfigIssues
          scalar:Bitmask64
configIssues  (fv:ATg:configIssues)
           Bitmask representation of the configuration issues found during the endpoint group deployment.
pol:ConfigSt
          scalar:Enum8
configSt  (fv:ATg:configSt)
           The configuration state of the endpoint group.
vz:GPCTag
          scalar:Uint32
pcTag  (fv:ATg:pcTag)
           The classification tag used for policy enforcement and zoning.
qos:TenantPrio
          scalar:Enum8
prio  (fv:ATg:prio)
           The QoS priority class identifier.
fv:ScopeId
          scalar:Uint32
scope  (fv:ATg:scope)
          
Defined in: pol:Comp
naming:Descr
          string:Basic
descr  (pol:Comp:descr)
           Specifies the description of a policy component.
Defined in: naming:NamedObject
naming:NameAlias
          string:Basic
nameAlias  (naming:NamedObject:nameAlias)
           NO COMMENTS
Defined in: mo:Modifiable
mo:TStamp
          scalar:Date
modTs  (mo:Modifiable:modTs)
           The time when this object was last modified.
Defined in: mo:Ownable
scalar:Uint16 uid  (mo:Ownable:uid)
           A unique identifier for this object.
Defined in: mo:Resolvable
mo:Owner
          scalar:Enum8
lcOwn  (mo:Resolvable:lcOwn)
           A value that indicates how this object was created. For internal use only.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32
childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32
status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Properties Detail

annotation

Type: mo:Annotation
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "128"
        Allowed Chars:
            Regex: [a-zA-Z0-9_.:-]+
    Comments:
NO COMMENTS



childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to





configIssues

Type: fv:ConfigIssues
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Bitmask representation of the configuration issues found during the endpoint group deployment.
Constants
none 0ull none NO COMMENTS
instrimedcy-unsupported 1024ull On-Demand deployment immediacy is not supported for uSeg EPG associated to VMware DVS domain Deployment Immediacy Validation
l3port-and-sub-interface-on-path 128ull L3 Port and Sub-Interface Not Allowed on Same Path NO COMMENTS
bd-not-present 1ull BD Not present BD Validations
bd-id-not-allocated 256ull BD IDs Not Allocated NO COMMENTS
context-not-present 2ull Context Not present Context Validations
invalid-rel-to-rtctrlProfile 32ull Invalid Association to Route Control Policy NO COMMENTS
id-not-allocated 4ull IDs Not Allocated NO COMMENTS
context-id-not-allocated 512ull Context IDs Not Allocated NO COMMENTS
not-associated-with-mgmt-zone 64ull Not Associated With Management Zone NO COMMENTS
encap-assignment 8ull Encapsulation Not Valid NO COMMENTS
DEFAULT none(0ull) none NO COMMENTS





configSt

Type: pol:ConfigSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The configuration state of the endpoint group.
Constants
not-applied 0 not-applied Configuration is not applied.
applying 1 applying Configuration is getting applied.
applied 2 applied Configuration applied.
failed-to-apply 3 failed-to-apply Failed to apply configuration
temp-failed-to-apply 4 temp-failed-to-apply Temporary failure. No faults are raised for this kind of failure.
DEFAULT not-applied(0) not-applied Configuration is not applied.





descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "128"
        Allowed Chars:
            Regex: [a-zA-Z0-9\\!#$%()*,-./:;@ _{|}~?&+]+
    Comments:
Specifies the description of a policy component.



dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.



encap

Type: base:Encap

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Comments:
The in-band access encapsulation.



exceptionTag

Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "512"
    Comments:
NO COMMENTS



extMngdBy

Type: mo:ExtMngdByType
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
undefined 0u undefined NO COMMENTS
msc 1u msc NO COMMENTS
DEFAULT undefined(0u) undefined NO COMMENTS





floodOnEncap

Type: fv:FloodOnEncap
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Comments:
Control at EPG level if the traffic L2 Multicast/Broadcast and Link Local Layer should be flooded only on ENCAP or based on bridg-domain settings
Constants
disabled 0 Disabled Flood on encapsulation for EPG is disabled, which essentially means it will take the behavior from bridge-domain
enabled 1 Enabled Flood on encapsulation for EPG is enabled, this will override bridge-domain settings
DEFAULT disabled(0) Disabled Flood on encapsulation for EPG is disabled, which essentially means it will take the behavior from bridge-domain





lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
A value that indicates how this object was created. For internal use only.
Constants
local 0 Local NO COMMENTS
policy 1 Policy NO COMMENTS
replica 2 Replica NO COMMENTS
resolveOnBehalf 3 ResolvedOnBehalf NO COMMENTS
implicit 4 Implicit NO COMMENTS
DEFAULT local(0) Local NO COMMENTS





matchT

Type: vz:MatchT
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Comments:
The provider label match criteria.
Constants
All 1 All Logical AND i.e. &&
AtleastOne 2 AtleastOne Logical OR i.e. ||
AtmostOne 3 AtmostOne Logical XOR
None 4 None Logical NOT i.e. !
DEFAULT AtleastOne(2) AtleastOne Logical OR i.e. ||





modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The time when this object was last modified.
Constants
never 0ull never NO COMMENTS
DEFAULT never(0ull) never NO COMMENTS





monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The monitoring policy attached to this observable object.



name

Type: naming:Name
Primitive Type: string:Basic

Overrides:fv:ATg:name  |  pol:Obj:name  |  naming:NamedObject:name
Units: null Encrypted: false Naming Property -- [NAMING RULES] Access: naming Category: TopLevelRegular Property Validators: Range: min: "1" max: "64" Allowed Chars: Regex: [a-zA-Z0-9_.:-]+
    Comments:
The in-band management endpoint group name. This name can be up to 64 alphanumeric characters.



nameAlias

Type: naming:NameAlias
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "63"
        Allowed Chars:
            Regex: [a-zA-Z0-9_.-]+
    Comments:
NO COMMENTS



pcTag

Type: vz:GPCTag
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The classification tag used for policy enforcement and zoning.
Constants
any 0u any NO COMMENTS
DEFAULT 0 --- A shorthand for GroupPolicyClassTag: A tag that is used to identify and classify a particular group of resources/end-points for policy enforcement purposes





prefGrMemb

Type: fv:PrefGrMemb
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Comments:
Represents parameter used to determine if EPg is part of a group that does not a contract for communication
Constants
include 1 Include EPg is part of preferred group member
exclude 2 Exclude EPg is NOT part of preferred group member
DEFAULT exclude(2) Exclude EPg is NOT part of preferred group member





prio

Type: qos:TenantPrio
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: (byte)0  max: (byte)3
    Comments:
The QoS priority class identifier.
Constants
unspecified 0 Unspecified NO COMMENTS
level3 1 Level3 User configurable classes
level2 2 Level2 NO COMMENTS
level1 3 Level1 NO COMMENTS
DEFAULT unspecified(0) Unspecified NO COMMENTS





rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.



scope

Type: fv:ScopeId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Constants
defaultValue 0u --- NO COMMENTS





status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.






triggerSt

Type: fv:TriggerSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Constants
not_triggerable 0 not_triggerable NO COMMENTS
triggerable 1 triggerable NO COMMENTS
DEFAULT not_triggerable(0) not_triggerable NO COMMENTS





txId

Type: scalar:Uint64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The identifier of the transaction in which the user action occurred.



uid

Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
A unique identifier for this object.