Class igmpsnoop:Dom (CONCRETE)

Class ID:2710
Class Label: IGMP Snooping Domain
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Concrete Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-protocol-l2, access-protocol-l3, admin, fabric-protocol-l3, tenant-ext-protocol-l3, tenant-protocol-l3]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: Fabric
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: false, HasHealth: true, HasEventRules: false ]

RN FORMAT: dom-{[encap]}

    [1] PREFIX=dom- PROPERTY = encap




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/igmpsnoop/inst/dom-{[encap]}

[1] sys/igmpsnoop/inst/dom-{[encap]}

                

Diagram

Super Mo: ipmcsnoop:Dom, Container Mos: igmpsnoop:Inst (deletable:no), Contained Mos: igmpsnoop:CktEp, igmpsnoop:Db, igmpsnoop:DomStats, igmpsnoop:QuerierP, igmpsnoop:QuerierSt, igmpsnoop:RtrIf, igmpsnoop:StRtrIf,

Containers Hierarchies

top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...          ├ igmpsnoop:Entity Holds IGMP control plane entity information.            ├ igmpsnoop:Inst Holds per IGMP instance information. There is only one instance of IGMP running in the system today.              ├ igmpsnoop:Dom An IGMP snooping domain, which is a bridge domain (BD) in which IGMP snooping is enabled. When an IGMP querier is in the network, it sends periodic IGMP queries that trigger IGMP report messages from hosts that want to receive IP multicast traffic. IGMP snooping listens to these IGMP reports to establish appropriate forwarding top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...    ├ igmpsnoop:Entity Holds IGMP control plane entity information.      ├ igmpsnoop:Inst Holds per IGMP instance information. There is only one instance of IGMP running in the system today.        ├ igmpsnoop:Dom An IGMP snooping domain, which is a bridge domain (BD) in which IGMP snooping is enabled. When an IGMP querier is in the network, it sends periodic IGMP queries that trigger IGMP report messages from hosts that want to receive IP multicast traffic. IGMP snooping listens to these IGMP reports to establish appropriate forwarding

Contained Hierarchy

igmpsnoop:Dom An IGMP snooping domain, which is a bridge domain (BD) in which IGMP snooping is enabled. When an IGMP querier is in the network, it sends periodic IGMP queries that trigger IGMP report messages from hosts that want to receive IP multicast traffic. IGMP snooping listens to these IGMP reports to establish appropriate forwarding  ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.  ├ health:Inst A base class for a health score instance.(Switch only)  ├ igmpsnoop:CktEp  Circuit endpoint representing EPG    ├ igmpsnoop:ACtrlP  Route control policy for igmp multicast snoop.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ igmpsnoop:TgtIf  Target Interface (outgoing interface list)        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag     ├ igmpsnoop:StMcGrp  Multicast Snoop Configured statically      ├ igmpsnoop:McSrc  IPMC Source IP        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ igmpsnoop:TgtIf  Target Interface (outgoing interface list)          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag     ├ nlb:StMacGrp  Multicast Snoop Configured statically      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ nlb:NlbTgtIf  Target Interface (outgoing interface list)        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ tag:Annotation       ├ tag:Tag   ├ igmpsnoop:Db Represents all the IGMP Snooping database information.    ├ igmpsnoop:McGrpRec Represents the Multicast Group records information.      ├ igmpsnoop:EpgRec Represents the endpoint group (EPG) entries in the Multicast group record information.        ├ igmpsnoop:ReportRec Represents the IGMP Snooping report record information snooped by the igmp-snoop application          ├ igmpsnoop:OIFRec Represents the IGMP Snooping outgoing interface list (OIF) information.            ├ igmpsnoop:HostRec Used for Explicit Host Tracking.      ├ igmpsnoop:ReportRec Represents the IGMP Snooping report record information snooped by the igmp-snoop application        ├ igmpsnoop:OIFRec Represents the IGMP Snooping outgoing interface list (OIF) information.          ├ igmpsnoop:HostRec Used for Explicit Host Tracking.  ├ igmpsnoop:DomStats Use the show ip IGMP snooping statistics vlan command to display IGMP snooping statistics. You can see the virtual port channel (vPC) statistics in this output. Use the clear ip igmp snooping statistics vlan command to clear IGMP snooping statistics.  ├ igmpsnoop:QuerierP When an IGMP snooping querier is enabled on a leaf, it sends out periodic IGMP queries on front panel ports of a BD on that leaf.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ igmpsnoop:QuerierSt Shows the IGMP Snoop querier state.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ igmpsnoop:RtrIf The Multicast router interface.    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ igmpsnoop:StRtrIf This object represents the multicast router if that is configured statically.    ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.    ├ nw:RtPathToIf A target relation to the interface information.

Inheritance

nw:Item Ignore.  ├ nw:Conn A connection abstraction.    ├ nw:GEp A group endpoint abstraction.      ├ nw:CpDom A control plane domain abstraction. This object represents a domain within a control plane instance. For example, a VRF.        ├ nw:ProtDom A protocol domain abstraction.          ├ ipmcsnoop:Dom  This objects hold per IP Multicast Snooping domain information            ├ igmpsnoop:Dom An IGMP snooping domain, which is a bridge domain (BD) in which IGMP snooping is enabled. When an IGMP querier is in the network, it sends periodic IGMP queries that trigger IGMP report messages from hosts that want to receive IP multicast traffic. IGMP snooping listens to these IGMP reports to establish appropriate forwarding

adminSt

Type: nw:AdminSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Admin State

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction

Delete or ignore. For internal use only.

ctrl

Type: ipmcsnoop:DomControl
Primitive Type: scalar:Bitmask8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Controls

dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn

A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

encap

Type: base:Encap

Overrides:ipmcsnoop:Dom:encap

Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular

The layer 2 domain encapsulation block corresponding the the IGMP domain.

flags

Type: ipmcsnoop:DomFlags
Primitive Type: scalar:Bitmask8

Overrides:ipmcsnoop:Dom:flags

Holder: igmpsnoop:DomFlags
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Specifies the IGMP Snooping domain flags.

fwdMode

Type: ipmcsnoop:FwdMode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Forwarding mode

grpFlushTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Group Flush No Querier timestamp

id

Type: l2:DomId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Id for this domain

lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

A value that indicates how this object was created. For internal use only.

modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The time when this object was last modified.

monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The monitoring policy attached to this observable object.

mrtrEpgId

Type: l2:DomId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Mrtr Epg Id used when sending packets to mrtr port

name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:CpDom:name  |  nw:Conn:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

dom name. @@@ name = tenantName + BD Name

nextQueryExpTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Querier Expiry timestamp, if external Querier

nextQueryTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Next Query timestamp, if we are Querier

numMcGrp

Type: nw:Counter32
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Number of multicast groups

numRtrIf

Type: nw:Counter32
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Number of router interfaces

numSrcGrp

Type: nw:Counter32
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Number of Source groups

rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn

Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus

The upgrade status. This property is for internal use only.