Class l1:VethIf (CONCRETE)

Class ID:11917
Class Label: Virtual Ethernet Interface Config
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Concrete Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-connectivity-l1, access-connectivity-l2, access-connectivity-l3, access-protocol-l1, access-protocol-l2, admin, fabric-connectivity-l3, fabric-protocol-l1, fabric-protocol-l2, tenant-connectivity-l3, tenant-ext-connectivity-l3, tenant-ext-protocol-l1, tenant-ext-protocol-l2, tenant-protocol-l1, tenant-protocol-l2]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: Fabric
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: false ]

RN FORMAT: veth-{[id]}

    [1] PREFIX=veth- PROPERTY = id




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/veth/inst/veth-{[id]}

[1] sys/veth/inst/veth-{[id]}

                

Diagram

Super Mo: l1:EthIf, Container Mos: veth:Inst (deletable:no), Contained Mos: fv:DomDef, l1:PrioFlowCtrlP, Relations From: l2:BrIf, l3:EncRtdIf, l2:ProtIf, l2:ExtIf, nw:LabelEp, leqpt:LooseNode, fv:Locale, l3:RtdIf, span:ASource, l1:ObservedEthIf, nw:PathEp, Relations To: infra:AttEntityP, cdp:IfPol, netflow:MonitorPol, copp:IfPol, dwdm:FabIfPol, dwdm:IfPol, fc:IfPol, fabric:HIfPol, l2:IfPol, l2:PortAuthPol, l2:PortSecurityPol, l3:IfPol, lacp:IfPol, lldp:IfPol, macsec:FabIfPol, macsec:IfPol, mcp:IfPol, mon:Pol, poe:IfPol, qos:DppPol, qos:PfcIfPol, qos:SdIfPol, stormctrl:IfPol, stp:IfPol, Relations: l1:RsAttEntityPCons, l1:RsCdpIfPolCons, l1:RsCeMonitorPolCons, l1:RsCoppIfPolCons, l1:RsDwdmFabIfPolCons, l1:RsDwdmIfPolCons, l1:RsFcIfPolCons, l1:RsHIfPolCons, l1:RsIpv4MonitorPolCons, l1:RsIpv6MonitorPolCons, l1:RsL2IfPolCons, l1:RsL2PortAuthCons, l1:RsL2PortSecurityCons, l1:RsL3IfPolCons, l1:RsLacpIfPolCons, l1:RsLldpIfPolCons, l1:RsMacsecFabPolCons, l1:RsMacsecPolCons, l1:RsMcpIfPolCons, l1:RsMonPolIfPolCons, l1:RsPoeIfPolCons, l1:RsQosEgressDppIfPolCons, l1:RsQosIngressDppIfPolCons, l1:RsQosPfcIfPolCons, l1:RsQosSdIfPolCons, l1:RsStormctrlIfPolCons, l1:RsStpIfPolCons, l1:RtBrConf, l1:RtEncPhysRtdConf, l1:RtEthIf, l1:RtExtConf, l1:RtLabelEpToAllowedEthIf, l1:RtLabelEpToConsumerEthIf, l1:RtLsNodeToIf, l1:RtNodePortAtt, l1:RtPhysRtdConf, l1:RtSpanSrcToL1IfAtt, l1:RtToObservedEthIf, nw:RtPathToIf,

Containers Hierarchies

top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...          ├ veth:Entity  Container for Virtual Ethernet Ports            ├ veth:Inst  This object represents whether the NIV feature is enabled/disabled on the node              ├ l1:VethIf  Virtual Ethernet Port Config top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...    ├ veth:Entity  Container for Virtual Ethernet Ports      ├ veth:Inst  This object represents whether the NIV feature is enabled/disabled on the node        ├ l1:VethIf  Virtual Ethernet Port Config

Contained Hierarchy

l1:VethIf  Virtual Ethernet Port Config  ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.  ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ fv:DomDef The domain information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fv:RsDomDefNs A source relation to the VxLAN namespace policy definition. This is an internal object.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fv:RsDomDefNsLocal A source relation to the VxLAN namespace policy definition. This is an internal object.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag     ├ fv:RtToDomDef A target relation to the domain definition. This is an internal object.    ├ fv:RtToFvDomDef     ├ health:Inst A base class for a health score instance.(Switch only)  ├ health:Inst A base class for a health score instance.(Switch only)  ├ l1:PrioFlowCtrlP  MO for slow-drain policy and PFC mode. This is a child policy of if.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ l1:RsAttEntityPCons   ├ l1:RsCdpIfPolCons A source relation to CDP interface policy parameters. Note that this relation is an internal object.  ├ l1:RsCeMonitorPolCons   ├ l1:RsCoppIfPolCons  Relationship with the coppIf policy consumed by this physical interface  ├ l1:RsDwdmFabIfPolCons   ├ l1:RsDwdmIfPolCons   ├ l1:RsFcIfPolCons  Relationship with the fcIfPol policy consumed by this physical interface  ├ l1:RsHIfPolCons A source relation to the host interface policy. Note that this relation is an internal object.  ├ l1:RsIpv4MonitorPolCons  Relationship with the Monitor policy consumed by this physical interface  ├ l1:RsIpv6MonitorPolCons   ├ l1:RsL2IfPolCons   ├ l1:RsL2PortAuthCons  Relationship with the Port Authentication policy consumed by this physical interface  ├ l1:RsL2PortSecurityCons  Relationship with the Port Security policy consumed by this physical interface  ├ l1:RsL3IfPolCons  Relationship with the L3 interface policy consumed by this physical interface  ├ l1:RsLacpIfPolCons A source relation to the port-Level LACP member policy. Note that this relation is an internal object.  ├ l1:RsLldpIfPolCons A source relation to the LLDP policy parameters for the interface. Note that this relation is an internal object.  ├ l1:RsMacsecFabPolCons   ├ l1:RsMacsecPolCons  Relationship with the cdp/lacp/lldp if policy consumed by this physical interface  ├ l1:RsMcpIfPolCons   ├ l1:RsMonPolIfPolCons A source relation to the base monitoring policy model. Note that this relation is an internal object.  ├ l1:RsPoeIfPolCons  Relationship with the poe policy consumed by this physical interface  ├ l1:RsQosEgressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Egress  ├ l1:RsQosIngressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Ingress  ├ l1:RsQosPfcIfPolCons  Relationship with the qosPfcPol policy consumed by this physical interface  ├ l1:RsQosSdIfPolCons  Relationship with the SdIfPol policy consumed by this physical interface  ├ l1:RsStormctrlIfPolCons   ├ l1:RsStpIfPolCons A source relation to the Spanning-Tree Protocol (STP) policy. Note that this relation is an internal object.  ├ l1:RtBrConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.  ├ l1:RtEncPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ l1:RtEthIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.  ├ l1:RtExtConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.  ├ l1:RtLabelEpToAllowedEthIf  Associations to the allowed interfaces for the label  ├ l1:RtLabelEpToConsumerEthIf  Associations to the interfaces consuming the label  ├ l1:RtLsNodeToIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.  ├ l1:RtNodePortAtt A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.  ├ l1:RtPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.  ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.  ├ l1:RtToObservedEthIf   ├ nw:RtPathToIf A target relation to the interface information.

Inheritance

nw:Item Ignore.  ├ nw:Conn A connection abstraction.    ├ nw:Ep A static endpoint.      ├ nw:ConnEp A connection endpoint abstraction.        ├ nw:If The interface information.          ├ l1:If An abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces.            ├ l1:EthIf An abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces.              ├ l1:VethIf  Virtual Ethernet Port Config

                l1:VethIf:ethpmCfgCtrl

                l1:EthIf:ReflectiveRelayCfgNotSupported

                

adminSt

Type: l1:AdminSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port state

autoNeg

Type: l1:AutoNeg
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port auto-negotiation

boundChannelId

Type: l1:BoundChannelId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

NO COMMENTS

boundIf

Type: nw:IfId
Primitive Type: base:IfIndex

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

NO COMMENTS

boundPcName

Type: string:Basic

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

NO COMMENTS

bw

Type: l1:Bw
Primitive Type: scalar:Uint32

Units: kb
Encrypted: false
Access: implicit
Category: TopLevelRegular

The bandwidth parameter for a routed interface, port channel, or subinterface.

capability

Type: l1:VethCapFlags
Primitive Type: scalar:Bitmask16

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The neighbor system capability.

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction

Delete or ignore. For internal use only.

configErr

Type: l1:VethConfig
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

NO COMMENTS

ctrl

Type: l1:VethCfgCtrl
Primitive Type: scalar:Bitmask16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The control state.

delay

Type: l1:Delay
Primitive Type: scalar:Uint32

Units: usec
Encrypted: false
Access: implicit
Category: TopLevelRegular

The administrative port delay time.

descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn

A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

dot1qEtherType

Type: l1:Dot1qEtherType
Primitive Type: scalar:Enum16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The administrative port Dot1q ether-type. Dot1q Ether Type configures the TPID value in the VLAN tag field for packets received and sent by the interface.

ethpmCfgFailedBmp

Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The configuration that failed for an interface. When this bitmap is set it will cause IFC to retry the configuration again.

ethpmCfgFailedTs

Type: scalar:Time

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The timestamp of the last failed configuration.

ethpmCfgState

Type: scalar:UByte

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The status of a configuration.

fcotChannelNumber

Type: l1:FcotChannelNumber
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

DWDM C optic Channel Number

hostNicGrp

Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

NO COMMENTS

id

Type: nw:IfId
Primitive Type: base:IfIndex

Overrides:nw:If:id

Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular

An object identifier.

inhBw

Type: l1:InheritBw
Primitive Type: scalar:Uint32

Units: kb
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port inherit bandwidth

isReflectiveRelayCfgSupported

Type: l1:IsReflectiveRelayCfgSupported
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

NO COMMENTS

label

Type: string:Basic

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

NO COMMENTS

layer

Type: l1:Layer
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port layer

lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

A value that indicates how this object was created. For internal use only.

linkDebounce

Type: l1:LinkDebounce
Primitive Type: scalar:Uint16

Units: msec
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port link debounce interval

linkLog

Type: l1:LinkLog
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative link logging enable

mdix

Type: l1:Mdix
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The administrative Mdix mode. The Medium-dependant interface crossover (Mdix) is when the interface automatically detects the required cable connection type (straight through or crossover) and configures the connection appropriately.

medium

Type: l1:Medium
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The administrative port medium type.

mgmtId

Type: l1:VethMgmtId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Ignore

modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The time when this object was last modified.

mode

Type: l1:Mode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port mode

monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The monitoring policy attached to this observable object.

mtu

Type: l1:Mtu
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port mtu

name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:Conn:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

The name of the object.

operSt

Type: l1:VethState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The runtime state of the object or policy.

operStQual

Type: l1:OperStQual
Primitive Type: scalar:Enum32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The chassis operational status qualifier.

pathSDescr

Type: naming:Descr
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Overide Port Description

portT

Type: eqpt:PortT
Primitive Type: scalar:Enum16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Type of the port: Fabric vs Leaf

prioFlowCtrl

Type: l1:PrioFlowCtrl
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Priority flow control mode

reflectiveRelayEn

Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port VEPA mode

regmacAllHost

Type: scalar:Bool

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

NO COMMENTS

rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn

Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

routerMac

Type: address:MAC

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The administrative router MAC address.

snmpTrapSt

Type: l1:SnmpTrapSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port snmp trap state

spanMode

Type: l1:SpanMode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port span mode

speed

Type: l1:Speed
Primitive Type: scalar:Enum16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative port speed

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus

The upgrade status. This property is for internal use only.

switchingSt

Type: l1:SwitchingSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Switching state

trunkLog

Type: l1:TrunkLog
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Administrative trunk logging enable

usage

Type: l1:PortUsage
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The port usage type.