Class l2:BD (CONCRETE)

Class ID:3377
Class Label: Bridge Domain
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Concrete Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-connectivity-l2, admin, fabric-connectivity-l3, fabric-protocol-l3, tenant-connectivity-l3, tenant-ext-connectivity-l3]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: EPG
Semantic Scope Evaluation Rule: Explicit
Monitoring Policy Source: Explicit
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: false ]

The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.

Naming Rules
RN FORMAT: bd-{[fabEncap]}

    [1] PREFIX=bd- PROPERTY = fabEncap




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/ctxsubstitute-{[encap]}/bd-{[fabEncap]}

[1] sys/ctxsubstitute-{[encap]}/bd-{[fabEncap]}

[2] topology/pod-{id}/node-{id}/sys/inst-{name}/bd-{[fabEncap]}

[3] sys/inst-{name}/bd-{[fabEncap]}

[4] topology/pod-{id}/node-{id}/sys/ctx-{[encap]}/bd-{[fabEncap]}

[5] sys/ctx-{[encap]}/bd-{[fabEncap]}

                


Diagram

Super Mo: l2:Dom,
Container Mos: l3:Dom (deletable:no),
Contained Mos: epm:Db, epm:DynEpgPolicyTrig, fmcast:Grp, l2:AnchorBD, l2:CfgMacEp, l2:EpCtrl, l2:EpRetPol, l2:EpScanInfo, l2:MacCktEp, l2:MpBd, l3:IpCktEp, l3:StaticRouteIpEp, qinq:CktEp, svi:If, vlan:CktEp, vsan:CktEp, vxlan:CktEp,
Relations From: fv:AIfConn, fv:EPgDef,
Relations To: fv:IfConn, nw:PathEp,
Relations: l2:RsExtBD, l2:RsPathDomAtt, l2:RtDomIfConn, l2:RtEPgDefToL2Dom,


Containers Hierarchies
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] fabric:Topology The root for IFC topology.
 
 ├
[V] fabric:Pod A pod.
 
 
 ├
[V] fabric:Node The root node for the APIC.
 
 
 
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 
 
 
 ├
[V] l3:CtxSubstitute  Tenant context object substitute. Its needed for internal PE purposes but it doesnt instantiate any VRF in the node.
 
 
 
 
 
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 ├
[V] l3:CtxSubstitute  Tenant context object substitute. Its needed for internal PE purposes but it doesnt instantiate any VRF in the node.
 
 
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] fabric:Topology The root for IFC topology.
 
 ├
[V] fabric:Pod A pod.
 
 
 ├
[V] fabric:Node The root node for the APIC.
 
 
 
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 
 
 
 ├
[V] l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.
 
 
 
 
 
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 ├
[V] l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.
 
 
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] fabric:Topology The root for IFC topology.
 
 ├
[V] fabric:Pod A pod.
 
 
 ├
[V] fabric:Node The root node for the APIC.
 
 
 
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 
 
 
 ├
[V] l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.
 
 
 
 
 
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 ├
[V] l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.
 
 
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.


Contained Hierarchy
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
 ├
[V] epm:Db 
 
 ├
[V] epm:AnycastIpEp  IP Anycast record
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 ├
[V] epm:IpEp 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 ├
[V] epm:MacEp 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 
 ├
[V] epm:MacEpFault  Mac Ep Fault record
 
 ├
[V] epm:RogueIpEp  IP Rogue record
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] epm:RogueMacEp 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] epm:SviIpEp  SVI IP record
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] epm:DynEpgPolicyTrig 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] fmcast:Grp A multicast group entity.
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] l2:AnchorBD 
 ├
[V] l2:CfgMacEp  Config Mac end point (Anycast MAC)
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:L2AnycastEP 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] l2:EpCtrl 
 ├
[V] l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] l2:EpScanInfo 
 ├
[V] l2:MacCktEp  Mac EP policy
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:MacCktCons 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] l2:RsMacBaseEppAtt 
 
 ├
[V] l2:RsMacEppAtt 
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] l2:MpBd  Layer2 Bridge-domain more properties used in multipod case Not added to BD mo because in single pod case these new added properties are not used.
 ├
[V] l2:RsExtBD A source relation to the interface connectivity. This is an internal object.
 ├
[V] l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] l2:LPort The holder of nxosmock-specific information of the port.
 
 ├
[V] l2:PortSecurityPolDef  Port Security Policy
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 ├
[V] l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.
 ├
[V] l3:IpCktEp  IP Circuit Endpoint
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l3:RsIpEppAtt 
 
 ├
[V] l3:RtIpCktEpIfConn  IP correspojding to this IfConn
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] l3:StaticRouteIpEp  Static Route IP end point
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 ├
[V] tag:Annotation 
 
 ├
[V] tag:Tag 
 ├
[V] qinq:CktEp  802.1q Vlan
 
 ├
[V] epm:Db 
 
 
 ├
[V] epm:AnycastIpEp  IP Anycast record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 
 ├
[V] epm:IpEp 
 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 
 ├
[V] epm:MacEp 
 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 
 
 ├
[V] epm:MacEpFault  Mac Ep Fault record
 
 
 ├
[V] epm:RogueIpEp  IP Rogue record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:RogueMacEp 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:SviIpEp  SVI IP record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] epm:DynEpgPolicyTrig 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:EpScanInfo 
 
 ├
[V] l2:MacEp A static Mac endpoint.
 
 
 ├
[V] l2:RtEpDefRefToL2MacEp 
 
 ├
[V] l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] l2:LPort The holder of nxosmock-specific information of the port.
 
 
 ├
[V] l2:PortSecurityPolDef  Port Security Policy
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 ├
[V] l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.
 
 ├
[V] l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.
 
 ├
[V] qinq:RsQinqEppAtt 
 ├
[V] svi:If A routed VLAN interface.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l3:RsL3If The source of the sub-interface/l3-interface.
 
 ├
[V] l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.
 
 ├
[V] l3:RtSpanSrcToL3OutAtt  Relation to the L3 out
 
 ├
[V] l3:RtSrcToL3OutAtt  Relation to the L3 out
 
 ├
[V] nw:RtPathToIf A target relation to the interface information.
 
 ├
[V] rmon:Dot1d The Dot1d statistics.
 
 ├
[V] rmon:Dot3Stats The Dot3 statistics.
 
 ├
[V] rmon:EgrCounters  Interface egress Drop counters
 
 ├
[V] rmon:EtherStats The Ethernet statistics.
 
 ├
[V] rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters
 
 ├
[V] rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters
 
 ├
[V] rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters
 
 ├
[V] rmon:IfBvMacsectx  Interface Bv Macsec Tx counters
 
 ├
[V] rmon:IfFcmac  fcmac interface In Out statistics counters
 
 ├
[V] rmon:IfHCIn The interface high capacity input statistics.
 
 ├
[V] rmon:IfHCOut The interface high capacity output statistics.
 
 ├
[V] rmon:IfIn The interface input statistics.
 
 ├
[V] rmon:IfMacsecrx  Interface Macsec Rx counters
 
 ├
[V] rmon:IfMacsectx  Interface Macsec Tx counters
 
 ├
[V] rmon:IfOut The interface output statistics.
 
 ├
[V] rmon:IfStorm 
 
 ├
[V] rmon:IngrCounters  Ingress counters
 
 ├
[V] rmon:IpIn The IPV4 input statistics.
 
 ├
[V] rmon:Ipv6IfStats The IPV6 interface statistics.
 ├
[V] vlan:CktEp A VLAN object created for an endpoint group with an 802.1q encap.
 
 ├
[V] epm:Db 
 
 
 ├
[V] epm:AnycastIpEp  IP Anycast record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 
 ├
[V] epm:IpEp 
 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 
 ├
[V] epm:MacEp 
 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 
 
 ├
[V] epm:MacEpFault  Mac Ep Fault record
 
 
 ├
[V] epm:RogueIpEp  IP Rogue record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:RogueMacEp 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:SviIpEp  SVI IP record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] epm:DynEpgPolicyTrig 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:EpScanInfo 
 
 ├
[V] l2:MacEp A static Mac endpoint.
 
 
 ├
[V] l2:RtEpDefRefToL2MacEp 
 
 ├
[V] l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] l2:LPort The holder of nxosmock-specific information of the port.
 
 
 ├
[V] l2:PortSecurityPolDef  Port Security Policy
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 ├
[V] l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.
 
 ├
[V] l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.
 
 ├
[V] vlan:RsVlanEppAtt A source relation to an abstract representation of the resolvable endpoint profile.
 
 ├
[V] vlan:RtSrcEncap A target relation to the VLAN object created for an endpoint group with an 802.1q encap.
 
 ├
[V] vlan:RtToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD
 ├
[V] vsan:CktEp  Vsan represents a generic CktEp
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 ├
[V] vsan:RsVsanLabelAtt  Associations to nw:LabelEp with rel-mo to vfcif "
 
 ├
[V] vsan:RsVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] vxlan:CktEp A VXLAN circuit.
 
 ├
[V] epm:Db 
 
 
 ├
[V] epm:AnycastIpEp  IP Anycast record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:DTEp  Tunnel endpoints discovered through epm
 
 
 ├
[V] epm:IpEp 
 
 
 
 ├
[V] epm:RtMacEpToIpEpAtt 
 
 
 ├
[V] epm:MacEp 
 
 
 
 ├
[V] epm:RsMacEpToIpEpAtt 
 
 
 ├
[V] epm:MacEpFault  Mac Ep Fault record
 
 
 ├
[V] epm:RogueIpEp  IP Rogue record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:RogueMacEp 
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] epm:SviIpEp  SVI IP record
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] epm:DynEpgPolicyTrig 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 ├
[V] tag:Annotation 
 
 
 ├
[V] tag:Tag 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:EpScanInfo 
 
 ├
[V] l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 ├
[V] tag:Tag 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 
 ├
[V] l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 ├
[V] l2:LPort The holder of nxosmock-specific information of the port.
 
 
 ├
[V] l2:PortSecurityPolDef  Port Security Policy
 
 
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 
 
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 
 
 
 ├
[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 
 
 
 ├
[V] tag:Annotation 
 
 
 
 
 ├
[V] tag:Tag 
 
 
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] l2:RtDomIfConn A target relation to the layer 2 flood domain.
 
 ├
[V] l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.
 
 ├
[V] l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.
 
 ├
[V] vxlan:RsVxlanEppAtt A source relation to an abstract representation of a resolvable endpoint profile.


Inheritance
[V] nw:Item Ignore.
 ├
[V] nw:Conn A connection abstraction.
 
 ├
[V] nw:GEp A group endpoint abstraction.
 
 
 ├
[V] nw:FwDom A data plane domain abstraction. This object represents a domain within a forwarding plane instance. For example, a bridge domain.
 
 
 
 ├
[V] l2:ADom  Layer2 Abstract Domain represents a generic layer 2 flood domain. It independent of technology like 802.1q, vxlan
 
 
 
 
 ├
[V] l2:Dom A generic layer 2 flood domain is independent of such technology as 802.1q.
 
 
 
 
 
 ├
[V] l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.


Events
                


Faults
                l2:BD:l3outCustomFault
l2:BD:learningDisabled
l2:BD:loopDetected
l2:BD:noOptArpFwdWithUnkMacFlood
l2:BD:optFloodIgnored
l2:Dom:vlanmgrCfgCtrl


Fsms
                


Properties Summary
Defined in: l2:BD
base:Encap accEncap  (l2:BD:accEncap)
           The Layer 2 access encapsulation (VLAN or VNID).
address:MAC addr  (l2:BD:addr)
           The peer IP address.
reference:BinRef bdDefDn  (l2:BD:bdDefDn)
           The bridge domain name.
l2:BridgeMode
          scalar:Enum8
bridgeMode  (l2:BD:bridgeMode)
           The Layer 2 bridge-domain parameter mode used by the node for enabling classical bridging or bridging with the IP address.
l2:EpMoveDetectMode
          scalar:Bitmask32
epMoveDetectMode  (l2:BD:epMoveDetectMode)
          
epm:BdOperSt
          scalar:Bitmask8
epOperSt  (l2:BD:epOperSt)
          
epm:BDOperStQual
          scalar:Enum8
epOperStQual  (l2:BD:epOperStQual)
           Ep operational state Qualifier
base:Encap fabEncap  (l2:BD:fabEncap)
           The Layer 2 bridge-domain Fabric encapsulation (VNID).
l2:FwdMode
          scalar:Bitmask8
fwdMode  (l2:BD:fwdMode)
           The Layer 2 bridge-domain parameter mode used by the node for enabling forwarding modes.
l2:HwRsrcIdT
          scalar:Uint32
hwResourceId  (l2:BD:hwResourceId)
           BD hardware resource identifier (allocated by eltm)
l2:HwRsrcIdT
          scalar:Uint32
hwShadowId  (l2:BD:hwShadowId)
           BD hardware shadow resource identifier (allocated by eltm)
scalar:Bool ipv6McastAllow  (l2:BD:ipv6McastAllow)
           NO COMMENTS
scalar:Bool mcastAllow  (l2:BD:mcastAllow)
           Multicast. Flag to indicate if multicast is enabled
mfdm:BdOperSt
          scalar:Bitmask32
mcastOperSt  (l2:BD:mcastOperSt)
           mcast operational state
reference:BinRef monPolDn  (l2:BD:monPolDn)
           The monitoring policy for the Layer 2 bridge-domain object.
l2:MultiDstPktAct
          scalar:Enum8
multiDstPktAct  (l2:BD:multiDstPktAct)
          
actrl:PcTag
          scalar:Uint32
pcTag  (l2:BD:pcTag)
           The default classId for the unknown Unicast traffic terminating on the L2 bridge-domain.
l2:qiqL2ProtTunMaskT
          scalar:Bitmask16
qiqL2ProtTunMask  (l2:BD:qiqL2ProtTunMask)
           QiQ L2 Protocol Tunneling Mask
qos:TenantPrio
          scalar:Enum8
qosPrio  (l2:BD:qosPrio)
           The default QOS group for the traffic on this circuit. This property represents one of three property levels.
l2:UnkMacUcastAct
          scalar:Enum8
unkMacUcastAct  (l2:BD:unkMacUcastAct)
           The classical bridge-domain parameter used by the node for forwarding data for an unknown mac Unicast destination.
l2:UnkMcastAct
          scalar:Enum8
unkMcastAct  (l2:BD:unkMcastAct)
          
l2:UnkMcastAct
          scalar:Enum8
v6unkMcastAct  (l2:BD:v6unkMcastAct)
           This represents the parameter used by the node (i.e. Leaf) for forwarding data for unknown V6 multicast destination
Defined in: l2:Dom
l2:DomAdminSt
          scalar:Enum8
adminSt  (l2:Dom:adminSt)
           admin state
scalar:Date createTs  (l2:Dom:createTs)
           creation time
l2:DomCtrl
          scalar:Bitmask32
ctrl  (l2:Dom:ctrl)
           The control state.
scalar:Uint64 epUpSeqNum  (l2:Dom:epUpSeqNum)
           EP Update Sequence Number
l2:FwdCtrl
          scalar:Bitmask32
fwdCtrl  (l2:Dom:fwdCtrl)
           Forwarding controls
l2:DomId
          scalar:Uint32
hwId  (l2:Dom:hwId)
           Internal domain id
l2:DomId
          scalar:Uint32
id  (l2:Dom:id)
           domain id
l2:DomMode
          scalar:Enum8
mode  (l2:Dom:mode)
           Vlan mode
l2:DomOperSt
          scalar:Enum8
operSt  (l2:Dom:operSt)
           oper state
l2:DomType
          scalar:Enum8
type  (l2:Dom:type)
           domain type
scalar:Bitmask64 vlanmgrCfgFailedBmp  (l2:Dom:vlanmgrCfgFailedBmp)
           null
scalar:Time vlanmgrCfgFailedTs  (l2:Dom:vlanmgrCfgFailedTs)
          
scalar:UByte vlanmgrCfgState  (l2:Dom:vlanmgrCfgState)
           null
l2:vlanmgrCustFaultBmpT
          scalar:Bitmask64
vlanmgrCustFaultBmp  (l2:Dom:vlanmgrCustFaultBmp)
           NO COMMENTS
Defined in: nw:FwDom
naming:Name
          string:Basic
name  (nw:FwDom:name)
           Overrides:nw:Conn:name
           The name of the object.
Defined in: mo:Modifiable
mo:TStamp
          scalar:Date
modTs  (mo:Modifiable:modTs)
           The time when this object was last modified.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32
childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32
status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Defined in: mo:Resolvable
mo:Owner
          scalar:Enum8
lcOwn  (mo:Resolvable:lcOwn)
           A value that indicates how this object was created. For internal use only.
Properties Detail

accEncap

Type: base:Encap

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The Layer 2 access encapsulation (VLAN or VNID).



addr

Type: address:MAC

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The peer IP address.



adminSt

Type: l2:DomAdminSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
admin state
Constants
suspend 1 suspend NO COMMENTS
active 2 active NO COMMENTS
DEFAULT active(2) active NO COMMENTS





bdDefDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The bridge domain name.



bridgeMode

Type: l2:BridgeMode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The Layer 2 bridge-domain parameter mode used by the node for enabling classical bridging or bridging with the IP address.
Constants
ip 1 Bridge with IP Bridge with IP, lookup the l3 entry to do bridging
mac 2 Bridge with MAC Classical bridging, bridge with MAC; lookup the mac entry for bridging
DEFAULT mac(2) Bridge with MAC Classical bridging, bridge with MAC; lookup the mac entry for bridging





childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to





createTs

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
creation time



ctrl

Type: l2:DomCtrl
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The control state.
Constants
none 0u None None
anchor 128u Anchor BD floating L3out Anchor BD for floating L3out config
qiq 16u QiQ QiQ Dom
untagged 1u Untagged Untagged
non-anchor 256u Non-anchor BD floating L3out Non-Anchor BD for floating L3out config
policy-enforced 2u Policy Enforced Policy enforced
en_ivxlan_dl 32u Enable ivxlan dont-learn bit remote don't Learn
isolated 4u Intra EPG Deny Enforced Isolated
transparent-ep 64u Transparent EP Transparent
service-ep 8u Service EP Service
DEFAULT none(0u) None None





dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.



epMoveDetectMode

Type: l2:EpMoveDetectMode
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Constants
garp 1u GARP based detection Detection through GARP
DEFAULT 0 --- Ep move detection mode





epOperSt

Type: epm:BdOperSt
Primitive Type: scalar:Bitmask8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Constants
unspecified 0 Unspecified Unspecified
learn-disabled 1 Learning Disabled learn disable
DEFAULT 0 --- BD operational state





epOperStQual

Type: epm:BDOperStQual
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Ep operational state Qualifier
Constants
unspecified 0 Unspecified Unspecified"
vrf-pfx-flush 1 VRF Prefix flush VRF PFX Flush
bd-pfx-flush 2 BD Prefix flush BD PFX Flush
bd-loop-detection 3 BD Loop Detection BD Loop Detection
bd-move-freq 4 BD Move frequency BD Move Frequency
fd-pfx-flush 5 FD Prefix flush FD PFX Flush
fd-tcn 6 FD TCN FD TCN
DEFAULT 0 --- BD operational state qualifier





epUpSeqNum

Type: scalar:Uint64

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
EP Update Sequence Number



fabEncap

Type: base:Encap

Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular
    Comments:
The Layer 2 bridge-domain Fabric encapsulation (VNID).



fwdCtrl

Type: l2:FwdCtrl
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Forwarding controls
Constants
mac-flush-on-vpc-delete 128u Delete vPC MAC addressesfrom fabric on EP delete Delete vPC MAC addresses from fabric on EP delete in BD unkUcastMac flood mode
mac-learn-disable 16u Disable MAC Learning MAC Learning, default is on. If disabled, the MAC learning will not be done for the BD
mdst-flood 1u Enable Multi Destination Flooding Multi destination (unknown multicast/broadcast) flood, default is on
encap-flood 256u Flood in Encapsulation Flood BUM and link local protocols within L2 Encapsulation of EPG
arp-flood 2u Enable ARP Flooding ARP flooding, default is off. If disabled it will do unicast routing on the target IP
proxy-arp 32u Enable Proxy ARP on EPG Proxy ARP enabled check, default is off.
ip-learn-subnet-check 4u Enable IP Learn Subnet Check IP learning subnet check, default is off. Every BD has multiple subnets associated with it. All IPs are learned without any restrictions. Enable this knob to suppress learning of IPs that fall outside the BD subnets
ng-avs 512u Learn feature for avs Learn feature for avs
copy-service 64u Enable copy service on BD Copy service default is off. If enabled, all copy service functionality will be applied on this BD
ip-learn-disable 8u Disable IP Learning IP Learning, default is on. If disabled, the IP learning will not be done for the BD
DEFAULT mdst-flood(1u) Enable Multi Destination Flooding Multi destination (unknown multicast/broadcast) flood, default is on





fwdMode

Type: l2:FwdMode
Primitive Type: scalar:Bitmask8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The Layer 2 bridge-domain parameter mode used by the node for enabling forwarding modes.
Constants
route 1 L3 Forwarding L3 forwarding, route the packets when the dest mac is our router mac
bridge 2 L2 Bridging L2 bridiging
defaultValue (1|2) --- NO COMMENTS





hwId

Type: l2:DomId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Internal domain id



hwResourceId

Type: l2:HwRsrcIdT
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
BD hardware resource identifier (allocated by eltm)



hwShadowId

Type: l2:HwRsrcIdT
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
BD hardware shadow resource identifier (allocated by eltm)



id

Type: l2:DomId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: create
Category: TopLevelRegular
    Comments:
domain id



ipv6McastAllow

Type: scalar:Bool

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS





lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
A value that indicates how this object was created. For internal use only.
Constants
local 0 Local NO COMMENTS
policy 1 Policy NO COMMENTS
replica 2 Replica NO COMMENTS
resolveOnBehalf 3 ResolvedOnBehalf NO COMMENTS
implicit 4 Implicit NO COMMENTS
DEFAULT local(0) Local NO COMMENTS





mcastAllow

Type: scalar:Bool

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Multicast. Flag to indicate if multicast is enabled
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS





mcastOperSt

Type: mfdm:BdOperSt
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
mcast operational state
Constants
opt-flood-ignored 1u Optimized flood ignored Optimized flood ignored
DEFAULT 0 --- BD operational state





modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The time when this object was last modified.
Constants
never 0ull never NO COMMENTS
DEFAULT never(0ull) never NO COMMENTS





mode

Type: l2:DomMode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Vlan mode
Constants
CE 1 CE NO COMMENTS
FabricPath 2 FabricPath NO COMMENTS
DEFAULT CE(1) CE NO COMMENTS





monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The monitoring policy for the Layer 2 bridge-domain object.



multiDstPktAct

Type: l2:MultiDstPktAct
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Constants
bd-flood 0 Flood in BD BD Flood, flood with all L2 encapsulations in that BD
encap-flood 1 Flood in Encapsulation Flood with the L2 Encapsulation
drop 2 Drop Drop
DEFAULT bd-flood(0) Flood in BD BD Flood, flood with all L2 encapsulations in that BD





name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:Conn:name
Units: null Encrypted: false Access: admin Category: TopLevelRegular
    Comments:
The name of the object.



operSt

Type: l2:DomOperSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
oper state
Constants
up 1 up NO COMMENTS
down 2 down NO COMMENTS
DEFAULT down(2) down NO COMMENTS





pcTag

Type: actrl:PcTag
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The default classId for the unknown Unicast traffic terminating on the L2 bridge-domain.
Constants
any 0u any NO COMMENTS
DEFAULT 0 --- Policy control tag





qiqL2ProtTunMask

Type: l2:qiqL2ProtTunMaskT
Primitive Type: scalar:Bitmask16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
QiQ L2 Protocol Tunneling Mask
Constants
none 0 NONE NO COMMENTS
stp 1 STP NO COMMENTS
lldp 2 LLDP NO COMMENTS
cdp 4 CDP NO COMMENTS
lacp 8 LACP NO COMMENTS
vtp 16 VTP NO COMMENTS
DEFAULT none(0) NONE NO COMMENTS





qosPrio

Type: qos:TenantPrio
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The default QOS group for the traffic on this circuit. This property represents one of three property levels.
Constants
unspecified 0 Unspecified NO COMMENTS
level3 1 Level3 (Default) User configurable classes
level2 2 Level2 NO COMMENTS
level1 3 Level1 NO COMMENTS
level6 7 Level6 NO COMMENTS
level5 8 Level5 NO COMMENTS
level4 9 Level4 NO COMMENTS
DEFAULT unspecified(0) Unspecified NO COMMENTS





rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.



status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.






type

Type: l2:DomType
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
domain type
Constants
bd-regular 1 BD regular NO COMMENTS
bd-reserved 2 BD reserved NO COMMENTS
bd-control 3 BD control NO COMMENTS
bd-external 4 BD external NO COMMENTS
ckt-vlan 5 Vlan circuit NO COMMENTS
ckt-vxlan 6 Vxlan circuit NO COMMENTS
bd-fcoe 7 BD fcoe NO COMMENTS
DEFAULT bd-regular(1) BD regular NO COMMENTS





unkMacUcastAct

Type: l2:UnkMacUcastAct
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The classical bridge-domain parameter used by the node for forwarding data for an unknown mac Unicast destination.
Constants
flood 0 Flood Flooding
proxy 1 Hardware Proxy Proxy
DEFAULT proxy(1) Hardware Proxy Proxy





unkMcastAct

Type: l2:UnkMcastAct
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Constants
flood 0 Flood Flooding
opt-flood 1 Optimized Flood Optimized flooding
DEFAULT flood(0) Flood Flooding





v6unkMcastAct

Type: l2:UnkMcastAct
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
This represents the parameter used by the node (i.e. Leaf) for forwarding data for unknown V6 multicast destination
Constants
flood 0 Flood Flooding
opt-flood 1 Optimized Flood Optimized flooding
DEFAULT flood(0) Flood Flooding





vlanmgrCfgFailedBmp

Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
null



vlanmgrCfgFailedTs

Type: scalar:Time

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:



vlanmgrCfgState

Type: scalar:UByte

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
null



vlanmgrCustFaultBmp

Type: l2:vlanmgrCustFaultBmpT
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
NO COMMENTS
Constants
none 0ull NONE NO COMMENTS
dtag-platform-unsupported 1ull QinQ to EPG translation not supported NO COMMENTS
l3vif-platform-unsupported 2ull L3 external virtual If not supported NO COMMENTS
DEFAULT none(0ull) NONE NO COMMENTS