| Constants |
| not-applicable |
0ull |
N/A |
NO COMMENTS
|
| tnlepg-accEncap-missing |
0x1000000000000000ull |
AccEncap should be set for TnlEPG deployment on Core Port. |
Vlan Encap should be set to tunnel before TnlEPG deployment.
|
| port-configured-for-breakout |
0x100000000000000ull |
Interface Configured For Breakout |
Port configured for breakout
|
| encap-mode-mismatch |
0x10000000000000ull |
Different encap modes are not allowed for an encap on a given interface. |
Different encap modes are not allowed for an encap on a given interface
|
| not-supported-with-egress-policy-enforcement-mode |
0x1000000000000ull |
Not supported with VRFs Egress Policy Enforcement Mode |
Not Supprted with VRF's "egress" policy enforcement mode
|
| def-rtleak-criteria-conflict |
0x100000000000ull |
Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides |
Different Default Route Leak Criterias for Context(VRF) Deployed on the Node from Different L3 Outsides.
|
| default-rt-leak-scope-conflict |
0x10000000000ull |
L3 Outsides have Different Scopes for Default Route Leak Policies on the same Node |
For Given Context(VRF) on the same Node, All L3 Outsides must have same Scope for Default Route Leak Policy.
|
| bgp-peer-profile-conflict |
0x1000000000ull |
Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides |
Same BGP Peer Profile for Context(VRF) is Deployed on the Node from Different L3 Outsides.
|
| dest-is-member-of-pc-or-vpc |
0x100000000ull |
SPAN Destination Cannot be PC or VPC Member |
SPAN validations
|
| ip-address-already-in-use |
0x10000000ull |
IP Address Already in Use |
IP-Address already in use
|
| encap-port-mode-mismatch |
0x2000000000000000ull |
Qinq Double Encaps can be deployed only on the trunk double encap ports and regular encaps cannot be deployed on such ports |
Port mode should be set to double encap port mode to deploy epgs with double encap
|
| ipattr-already-in-use |
0x200000000000000ull |
IP attribute already Used by another EPG |
IpAttr validation. an IpAttr can be used by only 1 EPg in a given l2BD
|
| tnlepg-port-mode-mismatch |
0x20000000000000ull |
Port mode should be set to tunnel for Tunnel deployment. |
Port mode should be set to tunnel before TnlEPG deployment.
|
| interleak-policy-conflict |
0x2000000000000ull |
Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. |
Different Interleak Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
|
| dns-not-supported-on-spine-inb |
0x200000000000ull |
Inband DNS resolution not supported on spines. |
DNS on inb epg is not supported on spine.
|
| qinq-double-tag-port-with-l2outs-or-l3outs |
0x20000000000ull |
L2Outs or L3Outs cannot be deployed on qinq double tag ports. |
L2outs and L3outs cannot support double encap(qinq)
|
| router-id-conflict |
0x2000000000ull |
Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides |
Different Router IDs for Context(VRF) Deployed on the Node from Different L3 Outsides.
|
| filter-entry-protocol-not-supported |
0x200000000ull |
Filter Entry Unsupported Protocol Value |
Filter validations
|
| invalid-ep-selection |
0x20000000ull |
Spine Cannot Be Selected For this EP |
Invalid EP selection
|
| bgpProt-policy-already-existing |
0x4000000000000000ull |
A specific leaf node can hold only a single bgpProtP config; this fault is raised when inconsistent configuration is detected |
A specific leaf node can hold only a single bgpProtP config, this fault is raised when inconsistent configuration is detected
|
| Cdp-tunneling-with-cdp-enabled-interface |
0x400000000000000ull |
CDP on tunnel interface is not allowed when protocol mask is set to CDP |
This fault is raised when you enable CDP on a Tunnel Interface, on which CDP tunneling mask is already enabled
|
| tnlepg-existing-on-port |
0x40000000000000ull |
Only one Tunnel can be deployed on an edge port. |
Only one TnlEPG can be set on a port.
|
| rtctrl-enforce-policy-conflict |
0x4000000000000ull |
Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. |
Different Route Control Enforcement Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
|
| IP-EPG-not-applicable-to-L2-only-BD |
0x400000000000ull |
IP based EPG not applicable to L2 only BD. |
IP based EPG is not applicable to L2 only BD.
|
| l3out-config-conflict |
0x40000000000ull |
Operational interface parameters cannot be different (e.g. MTU, MAC, SVI Autostate) from different deployments under a context |
For a given port, catch and report conflicting properties coming from different l3outs
|
| ospf-area-id-conflict |
0x4000000000ull |
Same OSPF Area for Context(VRF) Deployed on the Node from Different Outsides |
Same OSPF Area for Context(VRF) Deployed on the Node from Different L3 Outsides.
|
| invalid-contract-config |
0x400000000ull |
Invalid Contract Configuration |
contract rule error
|
| path-wiring-issues |
0x40000000ull |
Path Wiring Issues |
Path has wiring issues
The path (port/port-channel) getting referred has wiring-issues, which means the link is not
connected to a supported peer.
|
| multiple-mgmt-epg |
0x4000000ull |
Multiple Management EPGs Configured For Node |
Multiple managment EPgs configured
|
| epg-bd-mode-mismatch |
0x8000000000000000ull |
A regular EPg with double encap(qinq) path caanot be supported under Legacy BD.These type of paths will be supported by the EPgswhen they are under Regular BDs |
Legacy BD will not supported for the EPgs having double encap Statis ports
|
| Lldp-tunneling-with-lldp-enabled-interface |
0x800000000000000ull |
LLDP on tunnel interface is not allowed when protocol mask is set to LLDP |
This fault is raised when you enable LLDP on a Tunnel Interface, on which LLDP tunneling mask is already enabled
|
| Tnlport-with-regularEPGs |
0x80000000000000ull |
Regular EPgs,l2Outs,L3outs cannot be deployed on the edge ports. |
Port mode change to tunnel not allowed if regular EPGs exist on the port.
|
| dampening-policy-conflict |
0x8000000000000ull |
Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides. |
Different Dampening Policies are Defined for Context(VRF) Deployed on the Node from Different L3 Outsides.
|
| Qos-Policy-not-supported-for-IP-EPG |
0x800000000000ull |
QoS Policy not supported for IP based EPG. |
Custom QoS Policy not supported for IP based EPG.
|
| eigrp-multiple-out-conflict |
0x80000000000ull |
EIGRP cannot be deployed on the same node and same context from multiple L3 Outsides |
For a given context(VRF) on the same Node, EIGRP cannot be enabled on more than one L3 Outside.
|
| ospf-role-conflict |
0x8000000000ull |
OSPF have Different roles for Context(VRF) Deployed on the Node from Different L3 Outsides |
For Given Context(VRF) OSPF cannot be supporting protocol for BGP for one L3 Outside and Main protocol for some other L3 Outside on the same Node.
|
| duplicate-encap |
0x800000000ull |
Encap Is Already In Use. |
duplicate encap present on node.
|
| l3port-and-sub-interface-on-path |
0x80000000ull |
L3 Port and Sub-Interface Not Allowed on Same Path |
L3 Port and Sub-Interface are not allowed on the same path
Under a Layer3 Outside, a pure layer3 port and sub-interface configurations are not allowed on the same port.
|
| dhcp-provider-is-not-reachable |
0x8000000ull |
DHCP Provider Not Reachable |
DHCP provider is not reachable
|
| port-configured-for-fex |
1024ull |
Interface Configured For FEX |
Port is configured as fex-fabric
The path (i.e. port/port-channel) is currently getting used for attaching a FEX.
Please check the Fex Profile (infra:FexP) and the port-selectors (infra:HPortS) associated to it.
|
| invalid-exception-mask-for-subnet |
1048576ull |
Exception Subnet Mask Must Be More Specific than Subnet Mask |
Route Control - L3 External Subnet/Exception validation
|
| port-part-of-port-channel |
128ull |
Port is Member of Port Channel |
Path is not available
The configuration is directly referring to a port which is part of a port-channel. Such configurations
may affect the behavior of the port-channel and hence are not allowed.
Configuration should refer to the Access-Bundle-Group (infra:AccBndlGrp) directly.
|
| missing-dhcp-lbl-for-infra |
131072ull |
Infra DHCP relay profile is missing corresponding DHCP label |
DHCP validations
|
| multiple-external-encap |
16384ull |
Only One External Encap Allowed on Bridge Domain |
External Encap Validations
A Bridge Domain (fv:BD) can be extended outside the fabric using only one external encap per node.
Check the Layer 2 Outside configuration.
|
| path-is-out-of-service |
16777216ull |
Path Out of Service |
Path is Out of Service
The path (port/port-channel) getting referred is marked Out-of-Service.
Check the Out Of Service Policy (fabric:OOServicePol)
|
| vxlan-capacity |
16ull |
Insufficient VXLANs Available |
Not enough VXLANs available
Check the total number of EPgs, BDs, VRFs etc. confgigurations which use a VXLAN Id.
There total should not exceed the number of VXLANs supported.
|
| bd-not-present |
1ull |
BD Not Present |
BD Validations
BD is not present on the node. Following issues are possible:
1. This could be a temporary issue as the BD could be in the process of getting pushed to the node.
2. If the EPg is associated with a default BD then check the Connectivity Instrumentation Policy.
|
| port-configured-for-apic |
2048ull |
Port Connected to Controller |
Port is configured for apic
The path (i.e. port/port-channel) is currently getting used for APIC connection, hence
no configurations are allowed on it which may bring down the connectivity with APIC
|
| prefix-entry-already-in-use |
2097152ull |
Prefix Entry Already Used in Another EPG |
Prefix Entry validation
Under a Ctx (fvCtx aka VRF), a subnet can belong to only one external EPg at a time. Please check your external network instance profiles
(l3ext:InstP) under the Layer3 Outside configurations.
|
| port-configured-as-l3 |
256ull |
Interface Configured as L3 |
Path is configured as l3
The path (i.e. port/port-channel) is currently getting used by some configurations (example L3 Outside)
which need the port to be configured as a Layer-3 port.
|
| inconsistent-ibgp-peer-as-number |
262144ull |
Inconsistent iBGP Peer AS number provided |
BGP Peer AS validations
|
| context-not-present |
2ull |
VRF Not Present |
Context Validations
VRF is not present on the node. Following issues are possible:
1. This could be a temporary issue as the VRF could be in the process of getting pushed to the node.
2. If the EPg is associated with a default VRF then check the Connectivity Instrumentation Policy.
|
| ip-address-not-present |
32768ull |
IP Address Not Present |
IP-Address Validations
|
| vrf-capacity |
32ull |
Insufficient VRFs Available |
Not enough VRFs available
Check the total number of Ctx(aka VRF) deployed on the node.
The total should not exceed the number of VRF supported by the node.
|
| invalid-vlan |
33554432ull |
Invalid VLAN Configuration |
Invalid VLAN Configuration
The domain associated with the EPg is not allowed to use the specified encap. Check the Attachable Profile,
and VLAN/VXLAN Namespace (fvns:VlanInstP and fvns:VxlanInstP) configurations associated with the domain.
|
| port-channel-capacity |
4096ull |
Insufficient Port Channels Available |
Not enough port-channels available
Check the total number of Access Bundle Groups (i.e. infra:AccBndlGrp) deployed on the node.
The total number of port-channles created by the Access Bundle Groups should not exceed
the total number of port-channels supported by the node.
|
| encap-already-in-use |
4194304ull |
Encap Already Used in Another EPG |
Encap validation
On a node, an encap (VLAN or VXLAN) can be used by only 1 EPg or BD at a time.
|
| insufficient-resources |
4ull |
Insufficient Resources |
overall there are not enough resources
|
| port-configured-as-l2 |
512ull |
Interface Configured as L2 |
Port is configured as l2
The path (i.e. port/port-channel) is currently getting used by some configurations (example L2 Outside, Application EPg)
which need the port to be configured as a Layer-2 port.
|
| invalid-bgp-peer-address |
524288ull |
BGP Peer Address Cannot Be Same as Router ID |
BGP Peer Address validations
|
| invalid-path |
64ull |
Invalid Path Configuration |
Path is not available
Following issues are possible:
1. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) getting referred does not exist on the node.
2. The domain associated with the EPg is not allowed to use the specified path. Check the Attachable Profile
configuration associated with the domain.
3. The path (i.e. port/port-channel/Attachable-Profile/Loose-Node) is deployed on FEX and is part of l2Out/l3Out.
l2Out and l3Out are NOT supported on FEX
|
| multiple-ctx-configuration |
65536ull |
Multiple VRF configuration provided for an encap or path |
Conflicting VRF validations
A Layer-3 interface (which could be a pure-layer3 interface or a sub-interface) can belong to only 1 Ctx (fvCtx aka VRF)
at a time.
For pure-layer3 interface: Please check the Layer3 Outside configuration and make sure that for a given node same path (port/port-channel)
is not part of multiple Layer3 Outsides associated to different fvCtxs.
For sub-interface: Please check the Layer3 Outside configuration and make sure that for a given node the same encap is not part of multiple
Layer3 Outsides associated to different fvCtxs.
|
| native-or-untagged-encap-failure |
8192ull |
Only One Native or Untagged Encap Allowed on Interface |
Native/Untagged Vlan Validation
You are trying to configure two different encaps as native or untagged on the path (i.e. port/port-channel).
Check the "mode" type set on the relations between the EPg and the fabric:Path.
|
| multiple-outsides-from-context-configured-for-the-same-node |
8388608ull |
Multiple External Networks From Same Context Configured For Same Node - Deprecated |
Multiple Outsides from the Same Context Configured for the Same Node
Please check the Layer3 Outside configurations. Fault Deprecated - It's valid now.
|
| vlan-capacity |
8ull |
Insufficient VLANs Available |
Not enough VLANs available
Check the total number of EPgs and BDs deployed on the node.
There total should not exceed the number of VLANs supported by the node
|
| DEFAULT |
not-applicable(0ull) |
N/A |
NO COMMENTS
|
![[V]](styles/eye.gif)