Overview  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail 

Class compute:ABoard (ABSTRACT)

Class ID:1903
Encrypted: false - Exportable: false - Persistent: true
Privileges: []
SNMP OID:

Abstract Motherboard added for supporting aggregate boards.

Naming Rules 


DN FORMAT:


Inheritance
equipment:Item
 ├
 		equipment:Stateful
 
 		 ├
 		equipment:StatefulChComp
 
 		 
 		 ├
 		equipment:StatefulBladeComp
 
 		 
 		 
 		 ├
 		compute:ABoard
 
 		 
 		 
 		 
 		 ├
 		compute:Board Motherboard contained by physical compute item.
 
 		 
 		 
 		 
 		 ├
 		compute:ExtBoard Added for aggregate boards. Extended Motherboard contained by physical compute item.
Events


Faults 
                compute:ABoard:motherBoardVoltageLowerThresholdCritical

                compute:ABoard:motherBoardVoltageThresholdLowerNonRecoverable

                compute:ABoard:motherBoardVoltageThresholdUpperNonRecoverable

                compute:ABoard:motherBoardVoltageUpperThresholdCritical

                compute:ABoard:powerUsageProblem

                compute:ABoard:thermalProblem


Fsms


Properties Summary
Defined in: compute:ABoard
equipment:SensorThresholdStatus
          scalar:Enum8 		cmosVoltage  (compute:ABoard:cmosVoltage)
           NO COMMENTS
string:Basic faultQualifier  (compute:ABoard:faultQualifier)
           NO COMMENTS
equipment:Id
          scalar:Uint32 		id  (compute:ABoard:id)
           Overrides:equipment:Item:id
           NO COMMENTS
equipment:PowerState
          scalar:Enum8 		operPower  (compute:ABoard:operPower)
           NO COMMENTS
equipment:PowerState
          scalar:Enum8 		power  (compute:ABoard:power)
           Overrides:equipment:StatefulChComp:power
           NO COMMENTS
equipment:SensorThresholdStatus
          scalar:Enum8 		powerUsage  (compute:ABoard:powerUsage)
           NO COMMENTS
Defined in: equipment:StatefulBladeComp
reference:Object locationDn  (equipment:StatefulBladeComp:locationDn)
           Added for aggregate boards. This property refers to the DN of the extended board object
Defined in: equipment:StatefulChComp
equipment:OperQualifierReason
          string:Basic 		operQualifierReason  (equipment:StatefulChComp:operQualifierReason)
           Overrides:equipment:Stateful:operQualifierReason
           NO COMMENTS
equipment:Operability
          scalar:Enum8 		operState  (equipment:StatefulChComp:operState)
           NO COMMENTS
equipment:Operability
          scalar:Enum8 		operability  (equipment:StatefulChComp:operability)
           Overrides:equipment:Stateful:operability
           NO COMMENTS
equipment:SensorThresholdStatus
          scalar:Enum8 		perf  (equipment:StatefulChComp:perf)
           NO COMMENTS
equipment:Presence
          scalar:Enum8 		presence  (equipment:StatefulChComp:presence)
           Overrides:equipment:Stateful:presence
           NO COMMENTS
equipment:SensorThresholdStatus
          scalar:Enum8 		thermal  (equipment:StatefulChComp:thermal)
           NO COMMENTS
equipment:SensorThresholdStatus
          scalar:Enum8 		voltage  (equipment:StatefulChComp:voltage)
           NO COMMENTS
Defined in: equipment:Item
equipment:Model
          string:Basic 		model  (equipment:Item:model)
           NO COMMENTS
equipment:Revision
          string:Basic 		revision  (equipment:Item:revision)
           NO COMMENTS
equipment:Serial
          string:Basic 		serial  (equipment:Item:serial)
           NO COMMENTS
equipment:Vendor
          string:Basic 		vendor  (equipment:Item:vendor)
           NO COMMENTS
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32 		childAction  (mo:TopProps:childAction)
          
reference:Object dn  (mo:TopProps:dn)
           The Distinguished Name (dn) unambiguously identifies an object in the system.
The dn provides a fully qualified path from the top of the object tree, all the way to the object. It is built as a sequence of relative names separated by the "/" character.
For example:
< ... dn = "sys/chassis-5/blade-2/adaptor-1" />
reference:RN rn  (mo:TopProps:rn)
           The Relative Name (rn) uniquely identifies an object within a given context.
Note that a dn is comprised of a sequence of relative names. For example, the context "sys/chassis-1/blade-1/adaptor-1/host-eth-2" can be thought of as the following expression:
dn = <root object>/{rn}/{rn}/{rn}/{rn}/{rn}.
The rn can then be used to identify the object (for instance, "adaptor-1") within the context:
<... rn ="../" />
mo:InstSaclType
          scalar:Bitmask8 		sacl  (mo:TopProps:sacl)
           The system acl property for each Managed Object. br/> This property is a 8 bit mask and supports the following values :-
a: del
b: mod
c: addchild
d: cascade

By default all Managed Objects have the following permissions
a: del
b: mod
c: addchild
This property is persisted in the db. If this property has a value none
it means, the user has read only permissions on this object.
mo:ModificationStatus
          scalar:Bitmask32 		status  (mo:TopProps:status)
           This property controls the life cycle of a managed object
Properties Detail

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Property Validators:

Comments:
Constants
deleteAll 16384u NO COMMENTS
ignore 4096u NO COMMENTS
deleteNonPresent 8192u NO COMMENTS
DEFAULT 0 This type is used to

cmosVoltage

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

dn

Type: reference:Object
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Property Validators:

Comments:
The Distinguished Name (dn) unambiguously identifies an object in the system.
The dn provides a fully qualified path from the top of the object tree, all the way to the object. It is built as a sequence of relative names separated by the "/" character.
For example:
< ... dn = "sys/chassis-5/blade-2/adaptor-1" />

faultQualifier

Type: string:Basic
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

id

Type: equipment:Id
Primitive Type: scalar:Uint32
Overrides:equipment:Item:id
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS

locationDn

Type: reference:Object
Refers: compute:ExtBoard
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
Added for aggregate boards. This property refers to the DN of the extended board object

model

Type: equipment:Model
Primitive Type: string:Basic
Like: equipment:Info:model
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

operPower

Type: equipment:PowerState
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
on 1 NO COMMENTS
test 2 NO COMMENTS
off 3 NO COMMENTS
online 4 NO COMMENTS
offline 5 NO COMMENTS
offduty 6 NO COMMENTS
degraded 7 NO COMMENTS
power-save 8 NO COMMENTS
error 9 NO COMMENTS
ok 10 NO COMMENTS
failed 11 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

operQualifierReason

Type: equipment:OperQualifierReason
Primitive Type: string:Basic
Overrides:equipment:Stateful:operQualifierReason
Paths: equipment:StatefulChCompIf:operQualifierReason
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "256"
        Allowed Chars:
            Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+

Comments:
NO COMMENTS
Constants
defaultValue "N/A" NO COMMENTS

operState

Type: equipment:Operability
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:operState
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
operable 1 NO COMMENTS
inoperable 2 NO COMMENTS
degraded 3 NO COMMENTS
powered-off 4 NO COMMENTS
power-problem 5 NO COMMENTS
removed 6 NO COMMENTS
voltage-problem 7 NO COMMENTS
thermal-problem 8 NO COMMENTS
performance-problem 9 NO COMMENTS
accessibility-problem 10 NO COMMENTS
identity-unestablishable 11 NO COMMENTS
bios-post-timeout 12 NO COMMENTS
disabled 13 NO COMMENTS
malformed-fru 14 NO COMMENTS
backplane-port-problem 15 NO COMMENTS
chassis-intrusion 16 NO COMMENTS
non-optimal 17 NO COMMENTS
unsupported-config 18 NO COMMENTS
fabric-conn-problem 51 NO COMMENTS
fabric-unsupported-conn 52 NO COMMENTS
config 81 NO COMMENTS
equipment-problem 82 NO COMMENTS
decomissioning 83 NO COMMENTS
chassis-limit-exceeded 84 NO COMMENTS
not-supported 100 NO COMMENTS
discovery 101 NO COMMENTS
discovery-failed 102 NO COMMENTS
identify 103 NO COMMENTS
post-failure 104 NO COMMENTS
upgrade-problem 105 NO COMMENTS
peer-comm-problem 106 NO COMMENTS
auto-upgrade 107 NO COMMENTS
link-activate-blocked 108 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

operability

Type: equipment:Operability
Primitive Type: scalar:Enum8
Overrides:equipment:Stateful:operability
Paths: equipment:StatefulChCompIf:operability
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
operable 1 NO COMMENTS
inoperable 2 NO COMMENTS
degraded 3 NO COMMENTS
powered-off 4 NO COMMENTS
power-problem 5 NO COMMENTS
removed 6 NO COMMENTS
voltage-problem 7 NO COMMENTS
thermal-problem 8 NO COMMENTS
performance-problem 9 NO COMMENTS
accessibility-problem 10 NO COMMENTS
identity-unestablishable 11 NO COMMENTS
bios-post-timeout 12 NO COMMENTS
disabled 13 NO COMMENTS
malformed-fru 14 NO COMMENTS
backplane-port-problem 15 NO COMMENTS
chassis-intrusion 16 NO COMMENTS
non-optimal 17 NO COMMENTS
unsupported-config 18 NO COMMENTS
fabric-conn-problem 51 NO COMMENTS
fabric-unsupported-conn 52 NO COMMENTS
config 81 NO COMMENTS
equipment-problem 82 NO COMMENTS
decomissioning 83 NO COMMENTS
chassis-limit-exceeded 84 NO COMMENTS
not-supported 100 NO COMMENTS
discovery 101 NO COMMENTS
discovery-failed 102 NO COMMENTS
identify 103 NO COMMENTS
post-failure 104 NO COMMENTS
upgrade-problem 105 NO COMMENTS
peer-comm-problem 106 NO COMMENTS
auto-upgrade 107 NO COMMENTS
link-activate-blocked 108 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

perf

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:perf
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

power

Type: equipment:PowerState
Primitive Type: scalar:Enum8
Overrides:equipment:StatefulChComp:power
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
on 1 NO COMMENTS
test 2 NO COMMENTS
off 3 NO COMMENTS
online 4 NO COMMENTS
offline 5 NO COMMENTS
offduty 6 NO COMMENTS
degraded 7 NO COMMENTS
power-save 8 NO COMMENTS
error 9 NO COMMENTS
ok 10 NO COMMENTS
failed 11 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT not-supported(100) NO COMMENTS

powerUsage

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

presence

Type: equipment:Presence
Primitive Type: scalar:Enum8
Overrides:equipment:Stateful:presence
Paths: equipment:StatefulChCompIf:presence
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
empty 1 NO COMMENTS
equipped 10 NO COMMENTS
missing 11 NO COMMENTS
mismatch 12 NO COMMENTS
equipped-not-primary 13 NO COMMENTS
equipped-slave 14 NO COMMENTS
mismatch-slave 15 NO COMMENTS
missing-slave 16 NO COMMENTS
equipped-identity-unestablishable 20 NO COMMENTS
mismatch-identity-unestablishable 21 NO COMMENTS
equipped-with-malformed-fru 22 NO COMMENTS
inaccessible 30 NO COMMENTS
unauthorized 40 NO COMMENTS
not-supported 100 NO COMMENTS
equipped-unsupported 101 NO COMMENTS
equipped-deprecated 102 NO COMMENTS
equipped-disc-not-started 102 NO COMMENTS
equipped-disc-in-progress 103 NO COMMENTS
equipped-disc-error 104 NO COMMENTS
equipped-disc-unknown 105 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

revision

Type: equipment:Revision
Primitive Type: string:Basic
Like: equipment:Info:revision
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS
Constants
defaultValue "0" NO COMMENTS

rn

Type: reference:RN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Property Validators:

Comments:
The Relative Name (rn) uniquely identifies an object within a given context.
Note that a dn is comprised of a sequence of relative names. For example, the context "sys/chassis-1/blade-1/adaptor-1/host-eth-2" can be thought of as the following expression:
dn = <root object>/{rn}/{rn}/{rn}/{rn}/{rn}.
The rn can then be used to identify the object (for instance, "adaptor-1") within the context:
<... rn ="../" />

sacl

Type: mo:InstSaclType
Primitive Type: scalar:Bitmask8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelSacl
Property Validators:

Comments:
The system acl property for each Managed Object. br/> This property is a 8 bit mask and supports the following values :-
a: del
b: mod
c: addchild
d: cascade

By default all Managed Objects have the following permissions
a: del
b: mod
c: addchild
This property is persisted in the db. If this property has a value none
it means, the user has read only permissions on this object.
Constants
none 0 NO COMMENTS
del 1 NO COMMENTS
mod 2 NO COMMENTS
addchild 4 NO COMMENTS
cascade 8 NO COMMENTS
DEFAULT 0 NO COMMENTS

serial

Type: equipment:Serial
Primitive Type: string:Basic
Like: equipment:Info:serial
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Property Validators:

Comments:
This property controls the life cycle of a managed object
Constants
removed 16u In a setter method: specifies that an object should be removed.
In the return value of a setter method: indicates that an object has been removed.
created 2u In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.

thermal

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:thermal
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

vendor

Type: equipment:Vendor
Primitive Type: string:Basic
Like: equipment:Info:vendor
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

voltage

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:voltage
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS
Overview  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail