|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
equipment:Tpm
Trusted Platform Module would be a type of security controller.
It is a chip on the MotherBoard and is used to store encryption
keys and signifies the integrity of hardware.
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
├
|
lstorage:LocalDef
This is used to store the security key when the SED is managed locally by the UCSM user.
|
|
├
|
lstorage:Login
This is used to store the login information for KMIP server
|
|
├
|
lstorage:Login
This is used to store the login information for KMIP server
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
storage:EnclosureDiskSlotEp Indicates the disk slot in an enclosure. When the slot is populated, peerDn
references the disk present. This is the same as the LocalDiskSlotEp mo.
This mo was created because of a conflict between LocalDiskSlotEp and
LocalDisk. Both have the same rn and therefore cannot be contained under
the same container. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
storage:LocalDiskLocalDisk identifies the physical storage device, a group of LocalDisks can be
partitioned into VirtualDrive (or LunDisk in the old code). All of them are child
MOs under Storage::Controller. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
├
|
storage:LocalDiskLocalDisk identifies the physical storage device, a group of LocalDisks can be
partitioned into VirtualDrive (or LunDisk in the old code). All of them are child
MOs under Storage::Controller. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
|
|
|
├
|
lstorage:Login
This is used to store the login information for KMIP server
|
|
├
|
storage:LocalDiskEp
Represents SAS/SATA connectivity to a physical disk.
This object is created to indicate a SCSI controller has physical connectivity to \
the specified {@link storage:LocalDisk}. In addition, when the disk is accessed \
through a SAS link, the SAS expander must be configured to expose the physical disk
to the SCSI controller.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
storage:NvmeStorageAdding a new MO for all NVMe related properties. Right now it has only one field but this will
increase going forward. Idea is to segregate NVMe specific properties from generic storage controller MO |
|
├
|
storage:OnboardDevice OnBoard Device This MO can represent any component that is part of a storage controller etc |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
storage:VirtualDrive Storage physical drives are grouped as Drive Group, a drive group then can be partitioned into
virtual drives. Each virtual drive appears as a physical device to the O/S. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
storage:LunDisk A logical unit number, or LUN, is a number used to identify a logical storage unit. A LUN may be used with
any device which supports read/write operations, but is most often used to refer to a logical disk as created
on a SAN. LunDisk refers to the logical disk, it's deprecated and replaced with VirtualDrive |
|
|
├
|
storage:ScsiLunRef ScsiLunRef is to keep track of the location of LUN item defined
storage profile (or profile def). This meta-data is guaranteed to be persisted in the storage target.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
lstorage:Login
This is used to store the login information for KMIP server
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
├
|
storage:SasExpander Represents a SAS Expander that exposes the physical disks to the SCSI controller |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
├
|
storage:OnboardDevice OnBoard Device This MO can represent any component that is part of a storage controller etc |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|