Class ls:Server (CONCRETE)

Class ID:615
Encrypted: false - Exportable: true - Persistent: true
Privileges: [admin, ls-compute, ls-config, ls-server]
SNMP OID: .1.3.6.1.4.1.9.9.719.1.71.10

Logical Server Definition.
Holds and Regulates Specification of:

applied to the physical compute node like compute:Blade upon association. Logical Server can serve the following purposes:
Non-template logical server instances can be associated with compute resources either explicitly or via association with a pool. Logical server can be instantiated as a result of:
  • management operation (explicit definition)
  • discovery of a physical compute resource (physical hardware inherit or default config)
  • state of tier/group
  • Templates are never associatable. This means that one can not associate a template with a compute resource item. For that a logical server of type "instance" needs to be instantiated referencing this template via srcTemplName.


    Naming Rules
    RN FORMAT: ls-[name]
    
        [1] PREFIX=ls- PROPERTY = name
    
    
    
    
    DN FORMAT: 
    
    [0] org-[name]/tier-[name]/ls-[name]
    
    [1] org-[name]/ls-[name]
    
                    



    Containers Hierarchies
    top:Root This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
     ├
    org:Org
     
     ├
    ls:Server
    top:Root This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
     ├
    org:Org
     
     ├
    ls:Tier Tier
     
     
     ├
    ls:Server


    Contained Hierarchy
    ls:Server
     ├
    cimcvmedia:MountConfigDef This is the DefMo maintained under computePhysicalMo and also the same MO is used for specific vMedia policy (unnamed) where it is maintained under lsServerMo
     
     ├
    cimcvmedia:ConfigMountEntry This MO represents each of the configured vmedia mapping entries(ex: CD or HDD type)
     ├
    compute:PowerSyncDef
     ├
    event:Inst
     ├
    fabric:VCon Represents a virtual network interface connection (vCon), which is a virtual representation of a physical adapter. When a vNIC/vHBA placement policy is assigned to a service profile, and the service profile is associated with a server, the vCons in the vNIC/vHBA placement policy are assigned to the physical adapters. vNICs or vHBAs can be assigned to a vCon. Cisco UCS Man...
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     ├
    fault:SuppressTask
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that needs the schedule, as opposed to being referred by name.
     
     
     ├
    trig:SchedWindow Scheduled Window.
     ├
    ident:RequestEp
     ├
    initiator:RequestorEp Beginning of objects related to storage devices this represents the compute node
     
     ├
    initiator:GroupEp
     
     
     ├
    initiator:InitiatorEp this represents the hostep that a Lun is visible to
     
     
     
     ├
    storage:EpUser
     
     
     
     
     ├
    aaa:CimcSession
     
     
     ├
    initiator:StoreEp
     
     
     ├
    storage:NodeEp
     
     
     
     ├
    storage:IScsiTargetIf
     
     
     
     
     ├
    initiator:LunEp
     
     
     
     
     ├
    storage:AuthKey
     
     
     
     
     ├
    storage:EtherIf
     
     
     
     
     
     ├
    ip:ServiceIf
     ├
    ls:ComputeBinding Abstract Representation of a binding between a ls:Server and physical server.
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     ├
    ls:FcLocale The FcLocale hierarchy should not get copied from one service profile to another while cloning (creating template from SP or instantiating a Template). FcLocaleMo is created one per side under lsServer.
     
     ├
    ls:FcZoneGroup FcZoneGroupMo created per Vsan. It contains FcZones created under this Vsan.
     
     
     ├
    ls:ZoneInitiatorMember Initiator member of a Fibre Channel Zone.
     
     
     
     ├
    ls:FcZone Mo for representing a Fibre Channel Zone.
     
     
     
     
     ├
    ls:ZoneTargetMember Target Member of a Zone
     ├
    ls:IdentityInfo
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     ├
    ls:Issues Configuration Issues on the Logical Server. This is a singleton object implicitly populated under lsServer to proactively show configuration issues/missing/invalid configurations in the given logical server, under the following scenarios:- a: server profile association b: template association lsServer(configQuali...
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     ├
    ls:Power Allows the user to control the power state of a Service Profile. For example, the API user can use this MO to power on the blade associated with a service profile.
     ├
    ls:ServerAssocCtx
     
     ├
    adaptor:UnitAssocCtx
     
     ├
    compute:PhysicalAssocCtx
     
     ├
    processor:UnitAssocCtx
     ├
    ls:ServerExtension
     ├
    ls:ServerFsm
     
     ├
    ls:ServerFsmStage
     ├
    ls:ServerFsmTask
     ├
    ls:UuidHistory A temporary object used to hold the history of lsServer object properties.
     ├
    ls:VConAssign The VConAssign is used by the server administrator to administratively assign a named vNIC or vHBA interface to a numbered virtual connection. The vCon assignment is used to specify the PCI placement when a service profile contains multiple interfaces. To specify the PCI placement and PCI order, there are three options: Specify a vNIC/vHBA placement policy by se...
     ├
    ls:VersionBeh
     ├
    lsboot:Def TODO: decide the role if it admin or read-only Def
     
     ├
    lsboot:BootSecurity Container for secure boot variables Boot Security
     
     ├
    lsboot:Category Boot order category base class
     ├
    lsmaint:Ack Ack
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that needs the schedule, as opposed to being referred by name.
     
     
     ├
    trig:SchedWindow Scheduled Window.
     ├
    lstorage:ProfileBinding Represents a binding between a Service Profile ({@link ls:Server}) and a {@link lstorage:Profile}
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     ├
    lstorage:ProfileDef An object contained by {@link ls:Server} that encapsulates the service profile storage requirements. This object provides the same functionality as a {@link lstorage:Profile}, but unlike a {@link lstorage:Profile}, it is contained directly under a {@ls:Server}. This can be useful in cases when the {@link ls:Server} must be self-contained. The storage specified under a Stor...
     
     ├
    lstorage:ControllerDef
     
     
     ├
    lstorage:ControllerModeConfig
     
     
     ├
    lstorage:ControllerQualifier
     
     ├
    lstorage:LunSetConfig
     
     
     ├
    lstorage:LunSetDiskSlot Represents the Diskslots which are part of LunSet.
     
     
     ├
    lstorage:VirtualDriveDef Virtual Drive Def
     
     ├
    lstorage:ScsiLun Encapsulates the storage requirements for a single SCSI LUN. The user specifies whether the LUN should be accessed locally or remotely. Based on the requirements, the system automatically creates the SCSI LUN using one of the following methods: SCSI LUN is created locally on a physical server, such as a SCSI LUN configured in a RAID group using Direct Atta...
     
     ├
    lstorage:Security
     
     
     ├
    lstorage:DriveSecurity
     
     
     
     ├
    lstorage:Local
     
     
     
     ├
    lstorage:Remote
     
     
     
     
     ├
    lstorage:Login This is used to store the login information for KMIP server
     ├
    mgmt:Interface
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    mgmt:Vnet
     
     
     ├
    vnic:IpV4AddrExplConf
     
     
     ├
    vnic:IpV6AddrExplConf
     ├
    mo:KvCfgHolder A container for configured MO annotations
     
     ├
    mo:AbstractCfgKv An abstract representation of a configured annotation.
     ├
    sol:Config Abstraction of Serial over LAN configuration definition. Specifies configuration of Serial over LAN interface on a given compute resource. SOL configuration is optionally instantiated under logical server profile.
     ├
    storage:ALunRefBase ALunInstRefBase is used for a service profile to reference a local/remote deployed LUN. We can define concrete subclasses for local/remote LUN ref, respectively.
     ├
    storage:IniGroup Initiator Group definition. This specifies the list of initiators that form a logical group for HA/Multipath purpose.
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    storage:Initiator Named initiator that participates in a storage IniGroup
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    vnic:FcGroupDef vHBA Group
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     
     ├
    storage:ConnectionDef Policy used for specifying the target storage configuration. storage::ConnectionDef is created under storage::IniGroup, hence a local storage:ConnectionDef can be created for every IniGroup.
     
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     
     
     ├
    storage:FcTargetEp FcTargetEp represents target pWWNs given by the user. An FcTargetEpMo is created for every target pWWN.
     
     
     
     
     ├
    storage:VsanRef VsanRefMo represents the Vsan applied on the storage:Target/ User-defined FC Zone. A VsanRefMo is created for every Vsan applied on the storage:Target/ User-defined FC Zone.
     
     
     
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     ├
    storage:LocalDiskConfigDef LocalDiskConfig
     
     ├
    lstorage:Security
     
     
     ├
    lstorage:DriveSecurity
     
     
     
     ├
    lstorage:Local
     
     
     
     ├
    lstorage:Remote
     
     
     
     
     ├
    lstorage:Login This is used to store the login information for KMIP server
     
     ├
    storage:LocalDiskPartition identifies a partition as identified by fdisk
     ├
    vnic:ConnDef Connection Definition. A single ConnDef may be contained by a Logical Server in order to reference LAN/SAN connectivity policies. The referenced LAN/SAN connectivity policies describe the network/storage resources for the logical server.
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     ├
    vnic:DefBeh A vnic behavior policy definition to apply to the containing service profile. Behavior policy definitions describe the vnics/vhbas (if any) that should be created for a service profile (ls::Server) that contains no vnics/vhbas. There may be at most 2 DefBeh created for a service profile - one for vnics and one for vhbas.
     ├
    vnic:DynamicCon Specialization of Dynamic Connectivity Requirement. This sace defines the number of vnics preallocated for dynamic use. This object is contained logical server profile and treated as local definition.
     ├
    vnic:FcNode Representation of virtualized abstraction of SAN network Node. This object holds directive to allocation of virtualized or derived World Wide Node Name.
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    vnic:WwnnHistory A temporary object used to hold the history of vnicFcNode object properties.
     ├
    vnic:IScsi An IScsi vnic.
     
     ├
    fabric:FlowMonSrcEp An abstract representation of a source interface in a flow monitoring session.
     
     ├
    fabric:MonSrcEp An abstract representation of a source port in a monitoring session.
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    vnic:IPv4IscsiAddr Represents the IPv4 address of an iSCSI end-point, where the IP address is manually assigned. This object is used to provision a iSCSI vNIC with a static IP address.
     
     
     ├
    vnic:IPv4Dns Represents the IP address of a DNS server, which is used to resolve host names to IP addresses.
     
     ├
    vnic:IScsiAutoTargetIf IScsiAutoTargetIf
     
     ├
    vnic:IScsiStaticTargetIf Represents one target
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     
     ├
    vnic:Lun Represents a logical unit.
     
     ├
    vnic:IqnHistory A temporary object used to hold the history of vnicIScsi object properties.
     
     ├
    vnic:MacHistory A temporary object used to hold the history of vnicEtherBase object properties.
     
     ├
    vnic:Vlan
     
     
     ├
    vnic:IPv4If Represents a network end-point configured with an IPv4 Interface. An IP interface can be provisioned using a user-specified static address, a pool of IP addresses or through DHCP. Optionally, the IPv4 interface may be provisionned with a default gateway, static routes and DNS servers.
     
     
     
     ├
    vnic:IPv4Dhcp Represents an IPv4 interface which is configured at run-time through DHCP.
     
     
     
     ├
    vnic:IPv4Dns Represents the IP address of a DNS server, which is used to resolve host names to IP addresses.
     
     
     
     ├
    vnic:IPv4StaticRoute Represents a statically configured IPv4 route entry. A static route is configured by specifying a destination network and next hop router.
     
     
     
     ├
    vnic:IfRole An abstract base class representing the role(s) assigned to the IP interface
     
     
     
     ├
    vnic:IpV4Addr An abstract base class for IP v4 addresses.
     
     
     
     ├
    vnic:IpV4PooledAddr Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
     
     
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     
     
     
     ├
    vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
     
     
     
     ├
    vnic:IpV4StaticAddr Represents a statically assigned IPv4 address.
     
     
     ├
    vnic:IScsiTargetIfiscsi changes Begin IScsiTargetIf
     ├
    vnic:IScsiBootParams Contains the iSCSI boot configuration of a service profile.
     
     ├
    vnic:IScsiBootVnic Identifies the vnic for iscsi boot and contains settings.
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     
     ├
    vnic:IPv4If Represents a network end-point configured with an IPv4 Interface. An IP interface can be provisioned using a user-specified static address, a pool of IP addresses or through DHCP. Optionally, the IPv4 interface may be provisionned with a default gateway, static routes and DNS servers.
     
     
     
     ├
    vnic:IPv4Dhcp Represents an IPv4 interface which is configured at run-time through DHCP.
     
     
     
     ├
    vnic:IPv4Dns Represents the IP address of a DNS server, which is used to resolve host names to IP addresses.
     
     
     
     ├
    vnic:IPv4StaticRoute Represents a statically configured IPv4 route entry. A static route is configured by specifying a destination network and next hop router.
     
     
     
     ├
    vnic:IfRole An abstract base class representing the role(s) assigned to the IP interface
     
     
     
     ├
    vnic:IpV4Addr An abstract base class for IP v4 addresses.
     
     
     
     ├
    vnic:IpV4PooledAddr Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
     
     
     
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     
     
     
     ├
    vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
     
     
     
     ├
    vnic:IpV4StaticAddr Represents a statically assigned IPv4 address.
     
     
     ├
    vnic:IScsiTargetIfiscsi changes Begin IScsiTargetIf
     ├
    vnic:IScsiNode IScsi Identity Information.
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
     
     ├
    vnic:IqnHistory A temporary object used to hold the history of vnicIScsi object properties.
     ├
    vnic:IpV4AddrExplConf
     ├
    vnic:Vnic An abstract representation of a logical interface within a ls:Server Sub-classes are used to define Ethernet, Fibre Channel, Scsi or other types of interfaces. The interface is realized when the ls:Server is associated with a physical server and the system can find a suitable hardware adapter that can implement the interface specified in this MO.
     
     ├
    fabric:FlowMonSrcEp An abstract representation of a source interface in a flow monitoring session.
     
     ├
    fabric:MonSrcEp An abstract representation of a source port in a monitoring session.
     
     ├
    fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.

    Inheritance
    naming:NamedObject
     ├
    policy:Object
     
     ├
    policy:Definition
     
     
     ├
    compute:Container
     
     
     
     ├
    compute:Logical Logical specification Abstraction of compute item. Serves as a superclass of logical compute items s.a partitions (LPAR, VPAR etc.)
     
     
     
     
     ├
    compute:Server
     
     
     
     
     
     ├
    ls:Server

    Events
                    



    Faults
                    ls:Server:associationFailed
    ls:Server:configFailure
    ls:Server:discoveryFailed
    ls:Server:FAULT
    ls:Server:failed
    ls:Server:inaccessible
    ls:Server:maintenanceFailed
    ls:Server:removed
    ls:Server:server-unfulfilled
    ls:Server:svnicNotPresent



    Fsms
                    ls:Server:Configure



    Properties Summary
    Defined in: ls:Server
    naming:Name
              string:Basic
    agentPolicyName  (ls:Server:agentPolicyName)
               Name reference to the host agent policy governing host agent behaviour.
    ls:Assignment
              scalar:Enum8
    assignState  (ls:Server:assignState)
               Overrides:compute:Server:assignState
               State of the assignemnt between this logical server and the compute resource. Does not apply to templates.
    ls:AssocState
              scalar:Enum8
    assocState  (ls:Server:assocState)
               Overrides:compute:Server:assocState
               State of the association between this logical server and the compute resource. Does not apply to templates.
    naming:Name
              string:Basic
    biosProfileName  (ls:Server:biosProfileName)
               NO COMMENTS
    naming:Name
              string:Basic
    bootPolicyName  (ls:Server:bootPolicyName)
               Name reference to the boot policy specifying boot order rules. Note that boot policy can also be contained by the profile definition, in which case local definition is always checked first and then, if not found, hierarchical resolution by name is performed.
    ls:ConfigIssues
              scalar:Bitmask64
    configQualifier  (ls:Server:configQualifier)
               NO COMMENTS
    ls:ConfigState
              scalar:Enum8
    configState  (ls:Server:configState)
               State of the configuration between this logical server and the compute resource. Does not apply to templates.
    naming:Descr
              string:Basic
    descr  (ls:Server:descr)
               Overrides:policy:Definition:descr
               property name="placementPolicyName" type="naming:Name" owner="management" mod="explicit" backup="yes" refPolicy="power:Placement" refPolicyFault="set" / Name reference to System Event Log(SEL) policy (MEpLogPolicy) property name="selPolicyName" type="naming:Name" owner="management" mod="explicit" backup="yes" / Non-copyable description, such that description doesn't get copied from template to instance, or from original to clone
    naming:Name
              string:Basic
    dynamicConPolicyName  (ls:Server:dynamicConPolicyName)
               Name reference to dynamic resource Id space name
    pool:Name
              string:Basic
    extIPPoolName  (ls:Server:extIPPoolName)
               To store IP pool name to resolve it from
    vnic:ExternalMgmtIPMode
              scalar:Enum8
    extIPState  (ls:Server:extIPState)
               State of the external management IP assignment
    scalar:Uint64 fltAggr  (ls:Server:fltAggr)
               NO COMMENTS
    fsm:Descr
              string:Basic
    fsmDescr  (ls:Server:fsmDescr)
               NO COMMENTS
    ls:ServerFsmFlags
              scalar:Bitmask64
    fsmFlags  (ls:Server:fsmFlags)
               NO COMMENTS
    ls:ServerFsmStatus
              scalar:Enum32
    fsmPrev  (ls:Server:fsmPrev)
               NO COMMENTS
    fsm:Progress
              scalar:UByte
    fsmProgr  (ls:Server:fsmProgr)
               NO COMMENTS
    condition:ErrCode
              scalar:Uint32
    fsmRmtInvErrCode  (ls:Server:fsmRmtInvErrCode)
               NO COMMENTS
    string:Basic fsmRmtInvErrDescr  (ls:Server:fsmRmtInvErrDescr)
               NO COMMENTS
    condition:RemoteInvRslt
              scalar:Bitmask32
    fsmRmtInvRslt  (ls:Server:fsmRmtInvRslt)
               NO COMMENTS
    fsm:Descr
              string:Basic
    fsmStageDescr  (ls:Server:fsmStageDescr)
               NO COMMENTS
    scalar:Date fsmStamp  (ls:Server:fsmStamp)
               NO COMMENTS
    ls:ServerFsmStatus
              scalar:Enum32
    fsmStatus  (ls:Server:fsmStatus)
               NO COMMENTS
    scalar:UByte fsmTry  (ls:Server:fsmTry)
               NO COMMENTS
    naming:Name
              string:Basic
    graphicsCardPolicyName  (ls:Server:graphicsCardPolicyName)
               Name reference to Graphics Card policy
    naming:Name
              string:Basic
    hostFwPolicyName  (ls:Server:hostFwPolicyName)
               Name reference to the host firmware policy name. Firmware policy name identifies rules of how host firmware is managed. For example, whether firmware is moved together with the profile definition upon (re-)association. In addition, it specifies a set of firmware items that are to be populated into a blade.
    pool:Name
              string:Basic
    identPoolName  (ls:Server:identPoolName)
               Name reference to the identity pool from which uuids are drawn. As with templates, pools are resolved hierarchically on the org tree.
    naming:Name
              string:Basic
    kvmMgmtPolicyName  (ls:Server:kvmMgmtPolicyName)
               Name reference to KVM Mgmt policy
    naming:Name
              string:Basic
    localDiskPolicyName  (ls:Server:localDiskPolicyName)
               Name reference to the local disk configuration policy specifying configuration of local storage. Note that local disk policy can also be contained by the profile definition, in which case local definition is always checked first and then, if not found, hierarchical resolution by name is performed.
    naming:Name
              string:Basic
    maintPolicyName  (ls:Server:maintPolicyName)
               NO COMMENTS
    naming:Name
              string:Basic
    mgmtAccessPolicyName  (ls:Server:mgmtAccessPolicyName)
               Name reference to the external mgmt access policy.
    naming:Name
              string:Basic
    mgmtFwPolicyName  (ls:Server:mgmtFwPolicyName)
               Name reference to the management firmware (bmc etc.) policy name. Firmware policy name identifies rules of how management firmware is managed. For example, whether firmware is moved together with the profile definition upon (re-)association. In addition, it specifies a set of firmware items that are to be populated into a blade.
    naming:Name
              string:Basic
    name  (ls:Server:name)
               Overrides:compute:Server:name | policy:Object:name | naming:NamedObject:name
               NO COMMENTS
    reference:Object operBiosProfileName  (ls:Server:operBiosProfileName)
               NO COMMENTS
    reference:Object operBootPolicyName  (ls:Server:operBootPolicyName)
               NO COMMENTS
    reference:Object operDynamicConPolicyName  (ls:Server:operDynamicConPolicyName)
               NO COMMENTS
    reference:Object operExtIPPoolName  (ls:Server:operExtIPPoolName)
               NO COMMENTS
    reference:Object operGraphicsCardPolicyName  (ls:Server:operGraphicsCardPolicyName)
               NO COMMENTS
    reference:Object operHostFwPolicyName  (ls:Server:operHostFwPolicyName)
               NO COMMENTS
    reference:Object operIdentPoolName  (ls:Server:operIdentPoolName)
               NO COMMENTS
    reference:Object operKvmMgmtPolicyName  (ls:Server:operKvmMgmtPolicyName)
               NO COMMENTS
    reference:Object operLocalDiskPolicyName  (ls:Server:operLocalDiskPolicyName)
               NO COMMENTS
    reference:Object operMaintPolicyName  (ls:Server:operMaintPolicyName)
               NO COMMENTS
    reference:Object operMgmtAccessPolicyName  (ls:Server:operMgmtAccessPolicyName)
               NO COMMENTS
    reference:Object operMgmtFwPolicyName  (ls:Server:operMgmtFwPolicyName)
               NO COMMENTS
    reference:Object operPowerPolicyName  (ls:Server:operPowerPolicyName)
               NO COMMENTS
    reference:Object operPowerSyncPolicyName  (ls:Server:operPowerSyncPolicyName)
               NO COMMENTS
    reference:Object operScrubPolicyName  (ls:Server:operScrubPolicyName)
               NO COMMENTS
    reference:Object operSolPolicyName  (ls:Server:operSolPolicyName)
               NO COMMENTS
    reference:Object operSrcTemplName  (ls:Server:operSrcTemplName)
               NO COMMENTS
    ls:OperState
              scalar:Enum8
    operState  (ls:Server:operState)
               Operational state of the logical server. Does not apply to templates.
    reference:Object operStatsPolicyName  (ls:Server:operStatsPolicyName)
               NO COMMENTS
    reference:Object operVconProfileName  (ls:Server:operVconProfileName)
               NO COMMENTS
    reference:Object operVmediaPolicyName  (ls:Server:operVmediaPolicyName)
               NO COMMENTS
    ls:Owner
              scalar:Enum8
    owner  (ls:Server:owner)
               Logical server ownership. Defines the origins of given logical server instantiation. Logical server can be instantiated as a result of:
  • management operation (explicit definition)
  • discovery of a physical compute resource (physical hardware inherit or default config)
  • state of tier/group
  • naming:Name
              string:Basic
    powerPolicyName  (ls:Server:powerPolicyName)
               NO COMMENTS
    naming:Name
              string:Basic
    powerSyncPolicyName  (ls:Server:powerSyncPolicyName)
               Name reference to power sync policy
    mo:PropAclMask
              scalar:Uint64
    propAcl  (ls:Server:propAcl)
               NO COMMENTS
    ls:ResolveFromRemoteServer
              scalar:Enum8
    resolveRemote  (ls:Server:resolveRemote)
               Flag to indicate, if pools and policies need to be resolved from UCS Central, if connected. specific to a given logical server instance. Does not apply to templates.
    naming:Name
              string:Basic
    scrubPolicyName  (ls:Server:scrubPolicyName)
               Name reference to scrub policy
    naming:Name
              string:Basic
    solPolicyName  (ls:Server:solPolicyName)
               Name reference to the Serial over LAN configuration policy.
    ls:NameRef
              string:Basic
    srcTemplName  (ls:Server:srcTemplName)
               Name of the corresponding template that is used to define this logical server. Such templates are hierarchically resolved via the org tree where serach is performed towards org tree hierarchy.
    naming:Name
              string:Basic
    statsPolicyName  (ls:Server:statsPolicyName)
               Name reference to the stats policy.
    scalar:Bool svnicConfig  (ls:Server:svnicConfig)
               NO COMMENTS
    ls:Type
              scalar:Enum8
    type  (ls:Server:type)
               Specifies whether given definition is an instance or a template.
    naming:UserLabel
              string:Basic
    usrLbl  (ls:Server:usrLbl)
               Field to hold user label CSCta06454, CSCsx53838 Intended to be hostname in this case
    bios:Uuid
              address:UUID
    uuid  (ls:Server:uuid)
               Overrides:compute:Container:uuid
               uuuid identity of given logical server. specific to a given logical server instance. Does not apply to templates. uuid can be explicitly set or drawn from the pool identified by identPoolName. If this identity is set, pool resolution will not be attempted.
    address:UUIDSuffix uuidSuffix  (ls:Server:uuidSuffix)
               uuuid identity suffix of given logical server. specific to a given logical server instance. Does not apply to templates.
    naming:Name
              string:Basic
    vconProfileName  (ls:Server:vconProfileName)
               VCON profile name.
    naming:Name
              string:Basic
    vmediaPolicyName  (ls:Server:vmediaPolicyName)
               Name reference to the scriptable vmedia policy specifying vmedia mappings. Note that scriptable vmedia policy can also be contained by the profile definition, in which case local definition is always checked first and then, if not found, hierarchical resolution by name is performed.
    Defined in: compute:Logical
    reference:Object pnDn  (compute:Logical:pnDn)
               Distinguished name refrence to the corresponding compute resource. This property points to currently assigned compute resource. Does not apply to templates.
    Defined in: policy:Definition
    policy:InternalId
              scalar:Uint32
    intId  (policy:Definition:intId)
               NO COMMENTS
    scalar:Uint32 policyLevel  (policy:Definition:policyLevel)
               policyLevel is used internally by generic policy server.
    policy:PolicyOwner
              scalar:Enum8
    policyOwner  (policy:Definition:policyOwner)
               "local" denotes policy created by local policy client, "policy" denotes a policy created by remote policy server.
    Defined in: mo:TopProps
    mo:ModificationChildAction
              scalar:Bitmask32
    childAction  (mo:TopProps:childAction)
              
    reference:Object dn  (mo:TopProps:dn)
               The Distinguished Name (dn) unambiguously identifies an object in the system.
    The dn provides a fully qualified path from the top of the object tree, all the way to the object. It is built as a sequence of relative names separated by the "/" character.
    For example:
    < ... dn = "sys/chassis-5/blade-2/adaptor-1" />
    reference:RN rn  (mo:TopProps:rn)
               The Relative Name (rn) uniquely identifies an object within a given context.
    Note that a dn is comprised of a sequence of relative names. For example, the context "sys/chassis-1/blade-1/adaptor-1/host-eth-2" can be thought of as the following expression:
    dn = <root object>/{rn}/{rn}/{rn}/{rn}/{rn}.
    The rn can then be used to identify the object (for instance, "adaptor-1") within the context:
    <... rn ="../" />
    mo:InstSaclType
              scalar:Bitmask8
    sacl  (mo:TopProps:sacl)
               The system acl property for each Managed Object. br/> This property is a 8 bit mask and supports the following values :-
    a: del
    b: mod
    c: addchild
    d: cascade

    By default all Managed Objects have the following permissions
    a: del
    b: mod
    c: addchild
    This property is persisted in the db. If this property has a value none
    it means, the user has read only permissions on this object.
    mo:ModificationStatus
              scalar:Bitmask32
    status  (mo:TopProps:status)
               This property controls the life cycle of a managed object

    Properties Detail

    agentPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the host agent policy governing host agent behaviour.

    assignState

    Type: ls:Assignment
    Primitive Type: scalar:Enum8
    Overrides:compute:Server:assignState
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    State of the assignemnt between this logical server and the compute resource. Does not apply to templates.
    Constants
    unassigned 0 NO COMMENTS
    assigned 1 NO COMMENTS
    failed 2 NO COMMENTS
    DEFAULT unassigned(0) NO COMMENTS

    assocState

    Type: ls:AssocState
    Primitive Type: scalar:Enum8
    Overrides:compute:Server:assocState
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    State of the association between this logical server and the compute resource. Does not apply to templates.
    Constants
    unassociated 0 NO COMMENTS
    associating 1 NO COMMENTS
    associated 2 NO COMMENTS
    disassociating 3 NO COMMENTS
    failed 4 NO COMMENTS
    DEFAULT unassociated(0) NO COMMENTS

    biosProfileName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: bios:VProfile
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    NO COMMENTS

    bootPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: lsboot:Policy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the boot policy specifying boot order rules. Note that boot policy can also be contained by the profile definition, in which case local definition is always checked first and then, if not found, hierarchical resolution by name is performed.

    childAction

    Type: mo:ModificationChildAction
    Primitive Type: scalar:Bitmask32
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelChildAction
    Property Validators:
    
    Comments:
    Constants
    deleteAll 16384u NO COMMENTS
    ignore 4096u NO COMMENTS
    deleteNonPresent 8192u NO COMMENTS
    DEFAULT 0 This type is used to

    configQualifier

    Type: ls:ConfigIssues
    Primitive Type: scalar:Bitmask64
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    not-applicable 0ull Indicates there are no issues
    boot-order-pxe 1024ull issue with boot order, possibly vnic not found
    wwnn-derivation-from-vhba 1048576ull wwwnn derivation
    migration 1073741824ull NO COMMENTS
    incompat-bios-for-sriov-vnics 1099511627776ull NO COMMENTS
    iscsi-initiator-ip-address 1125899906842624ull NO COMMENTS
    remote-policy 1152921504606846976ull NO COMMENTS
    wwnn-assignment 128ull wwnn address assignment failed for a vhba, possibly illegal wwnn address or no available wwn in the pool
    processor-requirement 131072ull server does not fulfill processor requirements of the service profile
    physical-requirement 134217728ull Physical requirement unfulfilled
    hostimg-policy-invalid 137438953472ull NO COMMENTS
    vif-resources-overprovisioned 140737488355328ull NO COMMENTS
    pinning-invalid 144115188075855872ull NO COMMENTS
    incompatible-number-of-local-disks 16384ull server does not fulfill local disk requirements of the service profile
    mac-derivation-virtualized-port 16777216ull mac address cannot be cannot be hardware derived on a virtualized port
    switch-virtual-if-capacity 16ull Not enough VIfs available on switch, check if blade is discovered from both sides, possibly have to add more uplinks from chassis to switch
    invalid-wwn 17179869184ull Invalid wwn/wwpn
    missing-raid-key 17592186044416ull Missing RAID key.
    board-controller-update-unsupported 18014398509481984ull NO COMMENTS
    insufficient-resources 1ull overall there are not enough resources
    compute-undiscovered 2048ull server is still not discovered
    boot-configuration-invalid 2097152ull Boot order cannot include entries of both san and local disk
    incompatible-bios-image 2147483648ull Missing BIOS image.
    iscsi-config 2199023255552ull NO COMMENTS
    storage-path-configuration-error 2251799813685248ull NO COMMENTS
    resource-ownership-conflict 2305843009213693952ull NO COMMENTS
    system-uuid-assignment 256ull uuid address assignment failed, possibly illegal uuid or no available uuid in the pool
    server-position-requirement 262144ull server does not fulfill chassis/blade id requirements of the service profile
    destructive-local-disk-config 268435456ull Destructive local disk configuration.
    imgsec-policy-invalid 274877906944ull NO COMMENTS
    pinning-vlan-mismatch 281474976710656ull NO COMMENTS
    non-interrupt-fsm-running 288230376151711744ull NO COMMENTS
    vnic-capacity 2ull Not enough VNICs available
    adaptor-requirement 32768ull server does not fulfill adapter requirements of the service profile
    mac-address-assignment 32ull mac address assignment failed for a vnic, possibly illegal mac address or no available macs in the pool
    qos-policy-invalid 33554432ull NO COMMENTS
    insufficient-power-budget 34359738368ull NO COMMENTS
    boot-order-iscsi 35184372088832ull Boot order cannot include entries of both san and local disk
    vnic-vcon-provisioning-change 36028797018963968ull NO COMMENTS
    adaptor-protected-eth-capability 4096ull server's adapter is not failover capable
    connection-placement 4194304ull NO COMMENTS
    incompatible-disk-types 4294967296ull Different disk technologies such as HDD and SSD cannot be mixed in a single RAID.
    vnic-not-ha-ready 4398046511104ull NO COMMENTS
    zone-capacity 4503599627370496ull NO COMMENTS
    adaptor-out-of-vifs 4611686018427387904ull NO COMMENTS
    duplicate-address-conflict 4611686018427387904ull NO COMMENTS
    vhba-capacity 4ull Not enough VHBAs available
    boot-order-san-image-path 512ull issue with boot order, possibly vhba not found or boot target not found
    compute-unavailable 524288ull compute unavailable
    power-group-requirement 536870912ull NO COMMENTS
    provsrv-policy-invalid 549755813888ull NO COMMENTS
    vnic-vlan-assignment-error 562949953421312ull NO COMMENTS
    missing-firmware-image 576460752303423488ull missing firmware image.
    wwpn-assignment 64ull wwpn address assignment failed for a vhba, possibly illegal wwpn address or no available wwn in the pool
    memory-requirement 65536ull server does not fulfill memory requirements of the service profile
    vlan-port-capacity 67108864ull NO COMMENTS
    bootip-policy-invalid 68719476736ull gpxe policies error
    vfc-vnic-pvlan-conflict 70368744177664ull NO COMMENTS
    named-vlan-inaccessible 72057594037927936ull NO COMMENTS
    adaptor-fcoe-capability 8192ull server's adapter is not fcoe capable
    wwpn-derivation-virtualized-port 8388608ull WWWPN cannot be hardware derived on a virtualized port
    incompatible-raid-level 8589934592ull Incomptible RAID level.
    missing-primary-vlan 8796093022208ull NO COMMENTS
    fcoe-capacity 8ull Not enough FCOE capable vnics
    dynamic-vf-vnic 9007199254740992ull One of the vNICs referenced by a named VLAN is inaccessible to this server.
    DEFAULT not-applicable(0ull) Indicates there are no issues

    configState

    Type: ls:ConfigState
    Primitive Type: scalar:Enum8
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    State of the configuration between this logical server and the compute resource. Does not apply to templates.
    Constants
    not-applied 0 NO COMMENTS
    applying 1 NO COMMENTS
    failed-to-apply 2 NO COMMENTS
    applied 3 NO COMMENTS
    DEFAULT not-applied(0) NO COMMENTS

    descr

    Type: naming:Descr
    Primitive Type: string:Basic
    Overrides:policy:Definition:descr
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Property Validators:
        Range:  min: "0"  max: "256"
            Allowed Chars:
                Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+
    
    Comments:
    property name="placementPolicyName" type="naming:Name" owner="management" mod="explicit" backup="yes" refPolicy="power:Placement" refPolicyFault="set" / Name reference to System Event Log(SEL) policy (MEpLogPolicy) property name="selPolicyName" type="naming:Name" owner="management" mod="explicit" backup="yes" / Non-copyable description, such that description doesn't get copied from template to instance, or from original to clone

    dn

    Type: reference:Object
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelDn
    Property Validators:
    
    Comments:
    The Distinguished Name (dn) unambiguously identifies an object in the system.
    The dn provides a fully qualified path from the top of the object tree, all the way to the object. It is built as a sequence of relative names separated by the "/" character.
    For example:
    < ... dn = "sys/chassis-5/blade-2/adaptor-1" />

    dynamicConPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: vnic:DynamicConPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to dynamic resource Id space name

    extIPPoolName

    Type: pool:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: ippool:Pool
    Property Validators:
        Range:  min: "0"  max: "32"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    To store IP pool name to resolve it from
    Constants
    defaultValue "ext-mgmt" NO COMMENTS

    extIPState

    Type: vnic:ExternalMgmtIPMode
    Primitive Type: scalar:Enum8
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    State of the external management IP assignment
    Constants
    none 1 NO COMMENTS
    static 2 NO COMMENTS
    pooled 3 NO COMMENTS
    DEFAULT none(1) NO COMMENTS

    fltAggr

    Type: scalar:Uint64
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    fsmDescr

    Type: fsm:Descr
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
        Range:  min: "0"  max: "256"
            Allowed Chars:
                Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+
    
    Comments:
    NO COMMENTS

    fsmFlags

    Type: ls:ServerFsmFlags
    Primitive Type: scalar:Bitmask64
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    sam:dme:LsServerConfigure:final-disassoc 1125899906842624ull NO COMMENTS
    sam:dme:LsServerConfigure:ls-rename 16ull NO COMMENTS
    sam:dme:LsServerConfigure:modification 562949953421312ull NO COMMENTS
    defaultValue 0ull NO COMMENTS

    fsmPrev

    Type: ls:ServerFsmStatus
    Primitive Type: scalar:Enum32
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    nop 0u NO COMMENTS
    ConfigureFail 1002u NO COMMENTS
    ConfigureSuccess 1003u NO COMMENTS
    ConfigureResolveIdentifiers 1270u NO COMMENTS
    ConfigureApplyDefaultIdentifiers 1271u NO COMMENTS
    ConfigureResolveDefaultIdentifiers 1272u NO COMMENTS
    ConfigureResolvePolicies 1273u NO COMMENTS
    ConfigureResolveDistributableNames 1274u NO COMMENTS
    ConfigureResolveDistributable 1275u NO COMMENTS
    ConfigureResolveImages 1276u NO COMMENTS
    ConfigureResolveSchedule 1277u NO COMMENTS
    ConfigureProvisionStorage 1278u NO COMMENTS
    ConfigureWaitForStorageProvision 1279u NO COMMENTS
    ConfigureCommitStorage 1280u NO COMMENTS
    ConfigureWaitForCommitStorage 1281u NO COMMENTS
    ConfigureWaitForAssocCompletion 1282u NO COMMENTS
    ConfigureResolveNetworkPolicies 1471u NO COMMENTS
    ConfigureResolveNetworkTemplates 1472u NO COMMENTS
    ConfigureValidatePolicyOwnership 1473u NO COMMENTS
    ConfigureCheckAssignedIdentifiersForDup 1611u NO COMMENTS
    ConfigureCheckAssignedDefaultIdentifiersForDup 1612u NO COMMENTS
    ConfigureResolveStorageSchedule 1742u NO COMMENTS
    ConfigureApplyMaintConfig 1982u NO COMMENTS
    ConfigureEstimateApplyConfig 2245u NO COMMENTS
    ConfigureBegin 857u NO COMMENTS
    ConfigureApplyTemplate 858u NO COMMENTS
    ConfigureApplyIdentifiers 859u NO COMMENTS
    ConfigureApplyPolicies 860u NO COMMENTS
    ConfigureResolveBootConfig 861u NO COMMENTS
    ConfigureEvaluateAssociation 862u NO COMMENTS
    ConfigureAnalyzeImpact 863u NO COMMENTS
    ConfigureWaitForMaintPermission 864u NO COMMENTS
    ConfigureWaitForMaintWindow 865u NO COMMENTS
    ConfigureApplyConfig 866u NO COMMENTS
    DEFAULT nop(0u) NO COMMENTS

    fsmProgr

    Type: fsm:Progress
    Primitive Type: scalar:UByte
    Units: %
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
        Range:  min: (short)0  max: (short)100
    
    Comments:
    NO COMMENTS
    Constants
    defaultValue 100 NO COMMENTS

    fsmRmtInvErrCode

    Type: condition:ErrCode
    Primitive Type: scalar:Uint32
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    none 0u NO COMMENTS
    ERR-MO-illegal-iterator-state 100u NO COMMENTS
    ERR-MO-illegal-object-lifecycle-transition 101u NO COMMENTS
    ERR-MO-object-not-found 102u NO COMMENTS
    ERR-MO-duplicate-object 103u NO COMMENTS
    ERR-MO-naming-rule-violation 104u NO COMMENTS
    ERR-MO-illegal-creation 105u NO COMMENTS
    ERR-MO-illegal-containment 106u NO COMMENTS
    ERR-MO-deletion-rule-violation 107u NO COMMENTS
    ERR-MO-PROPERTY-value-out-of-range 120u NO COMMENTS
    ERR-MO-PROPERTY-no-such-property 121u NO COMMENTS
    ERR-MO-META-no-such-object-class 122u NO COMMENTS
    ERR-MO-CONFIG-child-object-cant-be-configured 130u NO COMMENTS
    ERR-FILTER-illegal-format 140u NO COMMENTS
    ERR-MO-resource-allocation 150u NO COMMENTS
    ERR-FSM-no-such-state 160u NO COMMENTS
    ERR-MO-access-denied 170u NO COMMENTS
    ERR-test-error-1 501u NO COMMENTS
    ERR-test-error-2 502u NO COMMENTS
    ERR-HOST-fru-identity-mismatch 503u NO COMMENTS
    ERR-IBMC-connect-error 504u NO COMMENTS
    ERR-IBMC-fru-retrieval-error 505u NO COMMENTS
    ERR-IBMC-invalid-end-point-config 506u NO COMMENTS
    ERR-SWITCH-invalid-if-config 507u NO COMMENTS
    ERR-DNLD-authentication-failure 508u NO COMMENTS
    ERR-DNLD-invalid-image 509u NO COMMENTS
    ERR-DNLD-no-space 510u NO COMMENTS
    ERR-DNLD-no-file 511u NO COMMENTS
    ERR-radius-group-set-error 512u NO COMMENTS
    ERR-ldap-group-set-error 513u NO COMMENTS
    ERR-tacacs-group-set-error 514u NO COMMENTS
    ERR-tacacs-enable-error 515u NO COMMENTS
    ERR-radius-set-error 516u NO COMMENTS
    ERR-radius-global-set-error 517u NO COMMENTS
    ERR-tacacs-set-error 518u NO COMMENTS
    ERR-tacacs-global-set-error 519u NO COMMENTS
    ERR-ldap-get-error 520u NO COMMENTS
    ERR-ldap-delete-error 521u NO COMMENTS
    ERR-ldap-set-error 522u NO COMMENTS
    ERR-acct-realm-set-error 523u NO COMMENTS
    ERR-auth-realm-set-error 524u NO COMMENTS
    ERR-role-set-error 525u NO COMMENTS
    ERR-locale-set-error 526u NO COMMENTS
    ERR-user-set-error 527u NO COMMENTS
    ERR-NTP-set-error 528u NO COMMENTS
    ERR-NTP-get-error 529u NO COMMENTS
    ERR-NTP-delete-error 530u NO COMMENTS
    ERR-DNS-set-error 531u NO COMMENTS
    ERR-DNS-get-error 532u NO COMMENTS
    ERR-DNS-delete-error 533u NO COMMENTS
    ERR-UPDATE-in-progress 534u NO COMMENTS
    ERR-UPDATE-failed 535u NO COMMENTS
    ERR-UPDATE-retry 536u NO COMMENTS
    ERR-admin-passwd-set 537u NO COMMENTS
    ERR-delete-user 538u NO COMMENTS
    ERR-create-user 539u NO COMMENTS
    ERR-modify-user 540u NO COMMENTS
    ERR-modify-role 541u NO COMMENTS
    ERR-modify-locale 542u NO COMMENTS
    ERR-modify-user-role 543u NO COMMENTS
    ERR-modify-user-locale 544u NO COMMENTS
    ERR-HTTP-set-error 545u NO COMMENTS
    ERR-HTTPS-set-error 546u NO COMMENTS
    ERR-timezone-set-error 547u NO COMMENTS
    ERR-set-network 548u NO COMMENTS
    ERR-set-port-channel 549u NO COMMENTS
    ERR-BIOS-network-boot-order-not-found 550u NO COMMENTS
    ERR-authentication 551u NO COMMENTS
    ERR-authorization-required 552u NO COMMENTS
    ERR-user-account-expired 553u NO COMMENTS
    ERR-session-cache-full 554u NO COMMENTS
    ERR-session-not-found 555u NO COMMENTS
    ERR-service-not-ready 556u NO COMMENTS
    ERR-internal-error 557u NO COMMENTS
    ERR-create-role 558u NO COMMENTS
    ERR-create-locale 559u NO COMMENTS
    ERR-Diagnostics-in-progress 560u NO COMMENTS
    ERR-Diagnostics-memtest-in-progress 561u NO COMMENTS
    ERR-Diagnostics-network-in-progress 562u NO COMMENTS
    ERR-delete-role 563u NO COMMENTS
    ERR-delete-locale 564u NO COMMENTS
    ERR-efi-Diagnostics--in-progress 565u NO COMMENTS
    ERR-delete-session 566u NO COMMENTS
    ERR-DNLD-hostkey-mismatch 567u NO COMMENTS
    ERR-IBMC-results-not-ready 568u NO COMMENTS
    ERR-IBMC-analyze-results 569u NO COMMENTS
    ERR-create-keyring 570u NO COMMENTS
    ERR-insufficiently-equipped 571u NO COMMENTS
    ERR-max-userid-sessions-reached 572u NO COMMENTS
    ERR-set-password-strength-check 573u NO COMMENTS
    ERR-BOARDCTRLUPDATE-ignore 574u NO COMMENTS
    ERR-DIAG-test-failed 575u NO COMMENTS
    ERR-DIAG-cancelled 576u NO COMMENTS
    ERR-DIAG-fsm-restarted 577u NO COMMENTS
    ERR-UNABLE-TO-FETCH-BIOS-SETTINGS 578u NO COMMENTS
    ERR-BIOS-TOKENS-OLD-BIOS 579u NO COMMENTS
    ERR-BIOS-TOKENS-OLD-CIMC 580u NO COMMENTS
    ERR-POWER-CAP-UNSUPPORTED 581u NO COMMENTS
    ERR-provider-group-set-error 582u NO COMMENTS
    ERR-ldap-group-modify-error 583u NO COMMENTS
    ERR-provider-group-modify-error 584u NO COMMENTS
    ERR-aaa-config-modify-error 585u NO COMMENTS
    ERR-get-max-http-user-sessions 586u NO COMMENTS
    ERR-SERVER-mis-connect 587u NO COMMENTS
    ERR-store-pre-login-banner-msg 588u NO COMMENTS
    ERR-ACTIVATE-in-progress 589u NO COMMENTS
    ERR-ACTIVATE-failed 590u NO COMMENTS
    ERR-ACTIVATE-retry 591u NO COMMENTS
    ERR-request-timeout 592u NO COMMENTS
    ERR-missing-method 593u NO COMMENTS
    ERR-xml-parse-error 594u NO COMMENTS
    ERR-auth-issue 595u NO COMMENTS
    ERR-http-initializing 596u NO COMMENTS
    ERR-secondary-node 597u NO COMMENTS
    ERR-auth-realm-get-error 598u NO COMMENTS
    ERR-radius-get-error 599u NO COMMENTS
    ERR-tacacs-plus-get-error 600u NO COMMENTS
    ERR-ep-set-error 601u NO COMMENTS
    ERR-MAX-subscriptions-allowed-error 602u NO COMMENTS
    ERR-enable-mgmt-conn 603u NO COMMENTS
    ERR-reset-adapter 604u NO COMMENTS
    ERR-TOKEN-request-denied 605u NO COMMENTS
    ERR-cli-session-limit-reached 606u NO COMMENTS
    ERR-2fa-auth-retry 607u NO COMMENTS
    ERR-IBMC-connector-info-retrieval-error 608u NO COMMENTS
    ERR-create-tp 609u NO COMMENTS
    ERR-POWER-PROFILE-IN-PROGRESS 610u NO COMMENTS
    ERR-DNLD-usb-unmounted 611u NO COMMENTS
    ERR-downgrade-fail 612u NO COMMENTS
    ERR-set-min-passphrase-length 613u NO COMMENTS
    ERR-set-key-cert 614u NO COMMENTS
    ERR-set-login-profile 615u NO COMMENTS
    DEFAULT 0 NO COMMENTS

    fsmRmtInvErrDescr

    Type: string:Basic
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
        Range:  min: "0"  max: "510"
    
    Comments:
    NO COMMENTS

    fsmRmtInvRslt

    Type: condition:RemoteInvRslt
    Primitive Type: scalar:Bitmask32
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    not-applicable 0u NO COMMENTS
    resource-unavailable 1024u NO COMMENTS
    service-unavailable 1048576u NO COMMENTS
    intermittent-error 1073741824u NO COMMENTS
    sw-defect 128u NO COMMENTS
    service-not-implemented-ignore 131072u NO COMMENTS
    extend-timeout 134217728u NO COMMENTS
    capability-not-implemented-failure 16384u NO COMMENTS
    illegal-fru 16777216u NO COMMENTS
    end-point-unavailable 16u NO COMMENTS
    failure 1u NO COMMENTS
    resource-capacity-exceeded 2048u NO COMMENTS
    service-protocol-error 2097152u NO COMMENTS
    fw-defect 256u NO COMMENTS
    service-not-implemented-fail 262144u NO COMMENTS
    task-reset 268435456u NO COMMENTS
    unidentified-fail 2u NO COMMENTS
    capability-not-supported 32768u NO COMMENTS
    end-point-failed 32u NO COMMENTS
    fru-state-indeterminate 33554432u NO COMMENTS
    resource-dependency 4096u NO COMMENTS
    fru-identity-indeterminate 4194304u NO COMMENTS
    internal-error 4u NO COMMENTS
    hw-defect 512u NO COMMENTS
    service-not-supported 524288u NO COMMENTS
    fru-not-supported 536870912u NO COMMENTS
    end-point-protocol-error 64u NO COMMENTS
    capability-unavailable 65536u NO COMMENTS
    fru-not-ready 67108864u NO COMMENTS
    capability-not-implemented-ignore 8192u NO COMMENTS
    fru-info-malformed 8388608u NO COMMENTS
    timeout 8u NO COMMENTS
    DEFAULT not-applicable(0u) NO COMMENTS

    fsmStageDescr

    Type: fsm:Descr
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
        Range:  min: "0"  max: "256"
            Allowed Chars:
                Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+
    
    Comments:
    NO COMMENTS

    fsmStamp

    Type: scalar:Date
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    never 0ull NO COMMENTS
    DEFAULT 0 NO COMMENTS

    fsmStatus

    Type: ls:ServerFsmStatus
    Primitive Type: scalar:Enum32
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    nop 0u NO COMMENTS
    ConfigureFail 1002u NO COMMENTS
    ConfigureSuccess 1003u NO COMMENTS
    ConfigureResolveIdentifiers 1270u NO COMMENTS
    ConfigureApplyDefaultIdentifiers 1271u NO COMMENTS
    ConfigureResolveDefaultIdentifiers 1272u NO COMMENTS
    ConfigureResolvePolicies 1273u NO COMMENTS
    ConfigureResolveDistributableNames 1274u NO COMMENTS
    ConfigureResolveDistributable 1275u NO COMMENTS
    ConfigureResolveImages 1276u NO COMMENTS
    ConfigureResolveSchedule 1277u NO COMMENTS
    ConfigureProvisionStorage 1278u NO COMMENTS
    ConfigureWaitForStorageProvision 1279u NO COMMENTS
    ConfigureCommitStorage 1280u NO COMMENTS
    ConfigureWaitForCommitStorage 1281u NO COMMENTS
    ConfigureWaitForAssocCompletion 1282u NO COMMENTS
    ConfigureResolveNetworkPolicies 1471u NO COMMENTS
    ConfigureResolveNetworkTemplates 1472u NO COMMENTS
    ConfigureValidatePolicyOwnership 1473u NO COMMENTS
    ConfigureCheckAssignedIdentifiersForDup 1611u NO COMMENTS
    ConfigureCheckAssignedDefaultIdentifiersForDup 1612u NO COMMENTS
    ConfigureResolveStorageSchedule 1742u NO COMMENTS
    ConfigureApplyMaintConfig 1982u NO COMMENTS
    ConfigureEstimateApplyConfig 2245u NO COMMENTS
    ConfigureBegin 857u NO COMMENTS
    ConfigureApplyTemplate 858u NO COMMENTS
    ConfigureApplyIdentifiers 859u NO COMMENTS
    ConfigureApplyPolicies 860u NO COMMENTS
    ConfigureResolveBootConfig 861u NO COMMENTS
    ConfigureEvaluateAssociation 862u NO COMMENTS
    ConfigureAnalyzeImpact 863u NO COMMENTS
    ConfigureWaitForMaintPermission 864u NO COMMENTS
    ConfigureWaitForMaintWindow 865u NO COMMENTS
    ConfigureApplyConfig 866u NO COMMENTS
    DEFAULT nop(0u) NO COMMENTS

    fsmTry

    Type: scalar:UByte
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    graphicsCardPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: compute:GraphicsCardPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to Graphics Card policy

    hostFwPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: firmware:ComputeHostPack
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the host firmware policy name. Firmware policy name identifies rules of how host firmware is managed. For example, whether firmware is moved together with the profile definition upon (re-)association. In addition, it specifies a set of firmware items that are to be populated into a blade.

    identPoolName

    Type: pool:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: uuidpool:Pool
    Property Validators:
        Range:  min: "0"  max: "32"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the identity pool from which uuids are drawn. As with templates, pools are resolved hierarchically on the org tree.

    intId

    Type: policy:InternalId
    Primitive Type: scalar:Uint32
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    none 0u NO COMMENTS
    DEFAULT none(0u) NO COMMENTS

    kvmMgmtPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: compute:KvmMgmtPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to KVM Mgmt policy

    localDiskPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: storage:LocalDiskConfigPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the local disk configuration policy specifying configuration of local storage. Note that local disk policy can also be contained by the profile definition, in which case local definition is always checked first and then, if not found, hierarchical resolution by name is performed.

    maintPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: lsmaint:MaintPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    NO COMMENTS

    mgmtAccessPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: aaa:EpAuthProfile
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the external mgmt access policy.

    mgmtFwPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: firmware:ComputeMgmtPack
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the management firmware (bmc etc.) policy name. Firmware policy name identifies rules of how management firmware is managed. For example, whether firmware is moved together with the profile definition upon (re-)association. In addition, it specifies a set of firmware items that are to be populated into a blade.

    name

    Type: naming:Name
    Primitive Type: string:Basic
    Overrides:compute:Server:name  |  policy:Object:name  |  naming:NamedObject:name
    Units: null
    Encrypted: false
    Naming Property -- [NAMING RULES]
    Access: naming
    Category: TopLevelRegular
    Property Validators:
        Range:  min: "2"  max: "32"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    NO COMMENTS

    operBiosProfileName

    Type: reference:Object
    Refers: bios:VProfile
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operBootPolicyName

    Type: reference:Object
    Refers: lsboot:Policy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operDynamicConPolicyName

    Type: reference:Object
    Refers: vnic:DynamicConPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operExtIPPoolName

    Type: reference:Object
    Refers: ippool:Pool
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operGraphicsCardPolicyName

    Type: reference:Object
    Refers: compute:GraphicsCardPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operHostFwPolicyName

    Type: reference:Object
    Refers: firmware:ComputeHostPack
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operIdentPoolName

    Type: reference:Object
    Refers: uuidpool:Pool
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operKvmMgmtPolicyName

    Type: reference:Object
    Refers: compute:KvmMgmtPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operLocalDiskPolicyName

    Type: reference:Object
    Refers: storage:LocalDiskConfigPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operMaintPolicyName

    Type: reference:Object
    Refers: lsmaint:MaintPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operMgmtAccessPolicyName

    Type: reference:Object
    Refers: aaa:EpAuthProfile
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operMgmtFwPolicyName

    Type: reference:Object
    Refers: firmware:ComputeMgmtPack
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operPowerPolicyName

    Type: reference:Object
    Refers: power:Policy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operPowerSyncPolicyName

    Type: reference:Object
    Refers: compute:PowerSyncPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operScrubPolicyName

    Type: reference:Object
    Refers: compute:ScrubPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operSolPolicyName

    Type: reference:Object
    Refers: sol:Policy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operSrcTemplName

    Type: reference:Object
    Refers: ls:Server
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operState

    Type: ls:OperState
    Primitive Type: scalar:Enum8
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    Operational state of the logical server. Does not apply to templates.
    Constants
    indeterminate 0 Operational state is unknown and can't be determined at the moment.
    unassociated 1 resoiurce is un-associated
    ok 10 Everything is fine. Resource is fully configured and is fully operable.
    discovery 11 (Re)discovery is in progress
    config 12 (Re)configuration is in progress
    unconfig 13 Unconfiguration is in progress
    power-off 14 resource is powered off
    restart 15 NO COMMENTS
    maintenance 20 resource is in maintenance.
    test 21 resource is under test (deep diag) and is unavailable for general use.
    compute-mismatch 29 resource mismatch.
    compute-failed 30 resource failure.
    degraded 31 resource is experiencing operability degradation.
    discovery-failed 32 discovery/check-pointing failure.
    config-failure 33 configuration is failed
    unconfig-failed 34 Unconfiguration failed
    test-failed 35 resource test failed
    maintenance-failed 36 Resource maintenance failure.
    removed 40 underlying resource is removed/unpopulated
    disabled 41 underlying resource is disabled.
    inaccessible 50 resource can't be accessed (either due to resource or communications failure) ** NEED FAULT
    thermal-problem 60 Environment Issues
    power-problem 61 NO COMMENTS
    voltage-problem 62 NO COMMENTS
    inoperable 63 NO COMMENTS
    decomissioning 101 NO COMMENTS
    bios-restore 201 NO COMMENTS
    cmos-reset 202 NO COMMENTS
    diagnostics 203 Diagnostics
    diagnostics-failed 204 NO COMMENTS
    pending-reboot 210 Deferred deployment states
    pending-reassociation 211 NO COMMENTS
    svnic-not-present 212 Netflow state
    DEFAULT unassociated(1) resoiurce is un-associated

    operStatsPolicyName

    Type: reference:Object
    Refers: stats:ThresholdPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operVconProfileName

    Type: reference:Object
    Refers: fabric:VConProfile
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    operVmediaPolicyName

    Type: reference:Object
    Refers: cimcvmedia:MountConfigPolicy
    Units: null
    Encrypted: false
    Access: oper
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    owner

    Type: ls:Owner
    Primitive Type: scalar:Enum8
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    Logical server ownership. Defines the origins of given logical server instantiation. Logical server can be instantiated as a result of:
  • management operation (explicit definition)
  • discovery of a physical compute resource (physical hardware inherit or default config)
  • state of tier/group
  • Constants
    system 0 Service Profile is implicitly managed by the system.
    management 1 Service Profile is configured by the end-user (XML API)
    physical-inherit 2 Service Profile is automatically created by the system and inherits the compute:Physical properties
    physical-default-config 4 NO COMMENTS
    policy 7 NO COMMENTS
    tier 8 NO COMMENTS
    DEFAULT management(1) Service Profile is configured by the end-user (XML API)

    pnDn

    Type: reference:Object
    Refers: compute:Physical
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    Distinguished name refrence to the corresponding compute resource. This property points to currently assigned compute resource. Does not apply to templates.

    policyLevel

    Type: scalar:Uint32
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    policyLevel is used internally by generic policy server.

    policyOwner

    Type: policy:PolicyOwner
    Primitive Type: scalar:Enum8
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    "local" denotes policy created by local policy client, "policy" denotes a policy created by remote policy server.
    Constants
    local 0 NO COMMENTS
    policy 1 NO COMMENTS
    pending-policy 2 NO COMMENTS
    DEFAULT local(0) NO COMMENTS

    powerPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: power:Policy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    NO COMMENTS
    Constants
    defaultValue "default" NO COMMENTS

    powerSyncPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: compute:PowerSyncPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to power sync policy

    propAcl

    Type: mo:PropAclMask
    Primitive Type: scalar:Uint64
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS

    resolveRemote

    Type: ls:ResolveFromRemoteServer
    Primitive Type: scalar:Enum8
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    Flag to indicate, if pools and policies need to be resolved from UCS Central, if connected. specific to a given logical server instance. Does not apply to templates.
    Constants
    no 0 NO COMMENTS
    yes 1 NO COMMENTS
    DEFAULT yes(1) NO COMMENTS

    rn

    Type: reference:RN
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRn
    Property Validators:
    
    Comments:
    The Relative Name (rn) uniquely identifies an object within a given context.
    Note that a dn is comprised of a sequence of relative names. For example, the context "sys/chassis-1/blade-1/adaptor-1/host-eth-2" can be thought of as the following expression:
    dn = <root object>/{rn}/{rn}/{rn}/{rn}/{rn}.
    The rn can then be used to identify the object (for instance, "adaptor-1") within the context:
    <... rn ="../" />

    sacl

    Type: mo:InstSaclType
    Primitive Type: scalar:Bitmask8
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelSacl
    Property Validators:
    
    Comments:
    The system acl property for each Managed Object. br/> This property is a 8 bit mask and supports the following values :-
    a: del
    b: mod
    c: addchild
    d: cascade

    By default all Managed Objects have the following permissions
    a: del
    b: mod
    c: addchild
    This property is persisted in the db. If this property has a value none
    it means, the user has read only permissions on this object.
    Constants
    none 0 NO COMMENTS
    del 1 NO COMMENTS
    mod 2 NO COMMENTS
    addchild 4 NO COMMENTS
    cascade 8 NO COMMENTS
    DEFAULT 0 NO COMMENTS

    scrubPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: compute:ScrubPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to scrub policy

    solPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: sol:Policy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the Serial over LAN configuration policy.

    srcTemplName

    Type: ls:NameRef
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: ls:Server
    Property Validators:
        Range:  min: "0"  max: "32"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name of the corresponding template that is used to define this logical server. Such templates are hierarchically resolved via the org tree where serach is performed towards org tree hierarchy.

    statsPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: stats:ThresholdPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the stats policy.
    Constants
    defaultValue "default" NO COMMENTS

    status

    Type: mo:ModificationStatus
    Primitive Type: scalar:Bitmask32
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelStatus
    Property Validators:
    
    Comments:
    This property controls the life cycle of a managed object
    Constants
    removed 16u In a setter method: specifies that an object should be removed.
    In the return value of a setter method: indicates that an object has been removed.
    created 2u In a setter method: specifies that an object should be created. An error is returned if the object already exists.
    In the return value of a setter method: indicates that an object has been created.
    modified 4u In a setter method: specifies that an object should be modified
    In the return value of a setter method: indicates that an object has been modified.
    deleted 8u In a setter method: specifies that an object should be deleted.
    In the return value of a setter method: indicates that an object has been deleted.
    DEFAULT 0 This type controls the life cycle of objects passed in the XML API.

    When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
    In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

    When invoking a setter method, the ModificationStatus is optional:
    If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.


    svnicConfig

    Type: scalar:Bool
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    NO COMMENTS
    Constants
    yes true NO COMMENTS
    no false NO COMMENTS

    type

    Type: ls:Type
    Primitive Type: scalar:Enum8
    Units: null
    Encrypted: false
    Access: create
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    Specifies whether given definition is an instance or a template.
    Constants
    instance 0 NO COMMENTS
    initial-template 1 NO COMMENTS
    updating-template 2 NO COMMENTS
    DEFAULT instance(0) NO COMMENTS

    usrLbl

    Type: naming:UserLabel
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Property Validators:
        Range:  min: "0"  max: "32"
            Allowed Chars:
                Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+
    
    Comments:
    Field to hold user label CSCta06454, CSCsx53838 Intended to be hostname in this case

    uuid

    Type: bios:Uuid
    Primitive Type: address:UUID
    Overrides:compute:Container:uuid
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    uuuid identity of given logical server. specific to a given logical server instance. Does not apply to templates. uuid can be explicitly set or drawn from the pool identified by identPoolName. If this identity is set, pool resolution will not be attempted.
    Constants
    derived base::UUID(0ull) NO COMMENTS
    DEFAULT derived(base::UUID(0ull)) NO COMMENTS

    uuidSuffix

    Type: address:UUIDSuffix
    Units: null
    Encrypted: false
    Access: implicit
    Category: TopLevelRegular
    Property Validators:
    
    Comments:
    uuuid identity suffix of given logical server. specific to a given logical server instance. Does not apply to templates.

    vconProfileName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: fabric:VConProfile
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    VCON profile name.

    vmediaPolicyName

    Type: naming:Name
    Primitive Type: string:Basic
    Units: null
    Encrypted: false
    Access: admin
    Category: TopLevelRegular
    Policy Reference to: cimcvmedia:MountConfigPolicy
    Property Validators:
        Range:  min: "0"  max: "16"
            Allowed Chars:
                Regex: [a-zA-Z0-9_.:-]+
    
    Comments:
    Name reference to the scriptable vmedia policy specifying vmedia mappings. Note that scriptable vmedia policy can also be contained by the profile definition, in which case local definition is always checked first and then, if not found, hierarchical resolution by name is performed.