Fault fltL2BDNoOptArpFwdWithUnkMacFlood
                

Rule ID:1364


Explanation:
This fault occurs when the arp flood knob is not set in bridge only mode

Recommended Action:
To recover from this fault, try the following actions


  1. Set the arp flood knob for this BD
  2. If the above actions did not resolve the issue, generate the show tech-support file and contact Cisco TAC.

Raised on MO: l2:BD

Fault Name: fltL2BDNoOptArpFwdWithUnkMacFlood

Unqualified API Name: noOptArpFwdWithUnkMacFlood
Code: F1364
Applied Mo DN Format:
     topology/pod-[id]/node-[id]/sys/ctxsubstitute-[encap]/bd-[fabEncap]
     sys/ctxsubstitute-[encap]/bd-[fabEncap]
     topology/pod-[id]/node-[id]/sys/inst-[name]/bd-[fabEncap]
     sys/inst-[name]/bd-[fabEncap]
     topology/pod-[id]/node-[id]/sys/ctx-[encap]/bd-[fabEncap]
     sys/ctx-[encap]/bd-[fabEncap]

Type: operational
Cause: bd-provisioning-failed
Severity: warning
Weight: 100
Tags:
Message: Optimized ARP forwarding is not supported with unknown MAC flood

Help:

Triggered By:
        not
          fwdCtrl contains arp-flood
        and
         unkMacUcastAct equals flood