Cisco System Model: Classeqpt:SupC

Super Mo: eqpt:Card,
Container Mos: eqpt:SupCSlot (deletable:no),
Contained Mos: eqpt:Asic, eqpt:CPU, eqpt:ConsP, eqpt:CpuP, eqpt:Dimm, eqpt:Ejec, eqpt:EobcP, eqpt:EpcP, eqpt:Flash, eqpt:Fpga, eqpt:IndLed, eqpt:LocLed, eqpt:MgmtP, eqpt:Obfl, eqpt:Sensor, eqpt:SpromSup, firmware:CardRunning, tag:AInst,
Relations From: eqptdiagp:SupCTsOd,
Relations To: mon:Pol,
Relations: eqpt:RsMonPolModulePolCons, eqpt:RtSupCOdDiag,

Containers Hierarchies

top:Root This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.

├

fabric:Topology The root for IFC topology.

├

fabric:Pod A pod.

├

fabric:Node The root node for the APIC.

├

top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...

├

eqpt:Ch A hardware chassis container contains chassis properties such as its role in the fabric (spine/tor) and a description of switch.

├

eqpt:SupCSlot The supervisor slot identifier.

├

eqpt:SupC The supervisor card, which contains the CPU running control plane.

top:Root This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.

├

├

eqpt:Ch A hardware chassis container contains chassis properties such as its role in the fabric (spine/tor) and a description of switch.

├

eqpt:SupCSlot The supervisor slot identifier.

├

eqpt:SupC The supervisor card, which contains the CPU running control plane.

Contained Hierarchy

eqpt:SupC The supervisor card, which contains the CPU running control plane.

├

eqpt:Asic The ASIC information container.

├

eqpt:FwdInst Forwarding information container

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.

├

health:Inst A base class for a health score instance.(Switch only)

├

eqpt:CPU A CPU information container.

├

eqpt:Core An equipment core container.

├

eqpt:ConsP An external (debug) console port.

├

eqpt:LPort Removed, ignore

├

eqpt:CpuP The CPU bound traffic port.

├

eqpt:LPort Removed, ignore

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

├

health:Inst A base class for a health score instance.(Switch only)

├

eqpt:Dimm A DIMM memory unit.

├

eqpt:Ejec The ejector information.

├

eqpt:EobcP An internal Ethernet out-of-band channel port. Note that all card component management is done via this port.

├

eqpt:LPort Removed, ignore

├

eqpt:EpcP An internal EPC port (internal hi-gig links connecting the external IO ports).

├

eqpt:LPort Removed, ignore

├

eqpt:Flash A flash memory unit.

├

eqpt:Fpga A field-programmable gate array container.

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

firmware:CompRunning Information about each equipment component firmware that is running.

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

├

health:Inst A base class for a health score instance.(Switch only)

├

health:Inst A base class for a health score instance.(Switch only)

├

eqpt:IndLed The locator LED for monitoring the component state.

├

eqpt:LocLed A locator LED on chassis components.

├

eqpt:MgmtP The external management port.

├

eqpt:IndLed The locator LED for monitoring the component state.

├

eqpt:LPort Removed, ignore

├

eqpt:LocLed A locator LED on chassis components.

├

eqpt:Obfl The onboard failure log information.

├

eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.

├

eqpt:RtSupCOdDiag A target relation to the supervisor card. Note that this relation is an internal object.

├

eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

├

health:Inst A base class for a health score instance.(Switch only)

├

eqpt:SpromSup The supervisor SPROM.

├

eqpt:SpCmnBlk A SPROM common block.

├

eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.

├

eqpt:SpSd A SPROM sensor data.

├

eqpt:SpSensorBlk A SPROM sensor block.

├

eqpt:SpSd A SPROM sensor data.

├

eqpt:SpromSupBlk The SPROM supervisor block.

├

eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.

├

eqpt:SpSd A SPROM sensor data.

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

├

health:Inst A base class for a health score instance.(Switch only)

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

├

firmware:CardRunning Information about each card firmware that is running.

├

fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.

├

├

health:Inst A base class for a health score instance.(Switch only)

├

health:Inst A base class for a health score instance.(Switch only)

├

tag:AInst The label instance, which is contained by the taggable object.

├

fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.

Inheritance

nw:Item Ignore.

├

eqpt:Item The abstraction for any equipment component/container in the system.

├

eqpt:Comp An equipment component such as a card, port, transceiver, or ASIC.

├

eqpt:Fru An abstraction of a field-replaceable unit, such as cards, receivers, fans, and PSUs.

├

eqpt:Card A container for different cards such as line cards and fabric cards.

├

eqpt:SupC The supervisor card, which contains the CPU running control plane.

Stat Counters

scalar:Double GAUGE: eqpt:FruPower:drawn(watts)
power consumed
Comments: Consumed

Stats

eqpt:SupC The supervisor card, which contains the CPU running control plane.

├

eqpt:FruPower15min A class that represents the most current statistics for FRU power in a 15 minute sampling interval. This class updates every 5 minutes.

├

eqpt:FruPower1d A class that represents the most current statistics for FRU power in a 1 day sampling interval. This class updates every hour.

├

eqpt:FruPower1h A class that represents the most current statistics for FRU power in a 1 hour sampling interval. This class updates every 15 minutes.

├

eqpt:FruPower1mo A class that represents the most current statistics for FRU power in a 1 month sampling interval. This class updates every day.

├

eqpt:FruPower1qtr A class that represents the most current statistics for FRU power in a 1 quarter sampling interval. This class updates every day.

├

eqpt:FruPower1w A class that represents the most current statistics for FRU power in a 1 week sampling interval. This class updates every day.

├

eqpt:FruPower1year A class that represents the most current statistics for FRU power in a 1 year sampling interval. This class updates every day.

├

eqpt:FruPower5min A class that represents the most current statistics for FRU power in a 5 minute sampling interval. This class updates every 10 seconds.

├

eqpt:FruPowerHist15min A class that represents historical statistics for FRU power in a 15 minute sampling interval. This class updates every 5 minutes.

├

eqpt:FruPowerHist1d A class that represents historical statistics for FRU power in a 1 day sampling interval. This class updates every hour.

├

eqpt:FruPowerHist1h A class that represents historical statistics for FRU power in a 1 hour sampling interval. This class updates every 15 minutes.

├

eqpt:FruPowerHist1mo A class that represents historical statistics for FRU power in a 1 month sampling interval. This class updates every day.

├

eqpt:FruPowerHist1qtr A class that represents historical statistics for FRU power in a 1 quarter sampling interval. This class updates every day.

├

eqpt:FruPowerHist1w A class that represents historical statistics for FRU power in a 1 week sampling interval. This class updates every day.

├

eqpt:FruPowerHist1year A class that represents historical statistics for FRU power in a 1 year sampling interval. This class updates every day.

├

eqpt:FruPowerHist5min A class that represents historical statistics for FRU power in a 5 minute sampling interval. This class updates every 10 seconds.

Events

                eqpt:Card:eqpt_Card_powerStChange

                eqpt:Card:eqpt_Card_operStChange

                eqpt:Card:eqpt_Card_redunStChange

                eqpt:Card:eqpt_Card_detected

                eqpt:Card:eqpt_Card_removed

                eqpt:Card:eqpt_Card_operStChange

                eqpt:Card:eqpt_Card_powerStChange

Faults
eqpt:Card:mismatchSlot eqpt:Card:powerStDeny eqpt:Card:unknownSwId

Fsms

Properties Summary

Defined in: eqpt:SupC
reference:BinRef	monPolDn (eqpt:SupC:monPolDn) The monitoring policy associated with the supervisor card.
eqpt:CardT scalar:Enum16	type (eqpt:SupC:type) Overrides:eqpt:Card:type The supervisor card type.

Defined in: eqpt:Card
eqpt:MacAddr string:Basic	macB (eqpt:Card:macB) The MAC address base.
eqpt:MacAddrLen scalar:Uint16	macL (eqpt:Card:macL) The MAC address length.
eqpt:CardNumPorts scalar:Uint16	numP (eqpt:Card:numP) The number of ports on the card.
eqpt:COpSt scalar:Enum8	operSt (eqpt:Card:operSt) The operational status.
eqpt:PwrState scalar:Enum8	pwrSt (eqpt:Card:pwrSt)
eqpt:RdSt scalar:Enum8	rdSt (eqpt:Card:rdSt) The redundancy state.
eqpt:CardId scalar:Uint32	swCId (eqpt:Card:swCId) The software card ID
scalar:Date	upTs (eqpt:Card:upTs)

Defined in: eqpt:Fru
cap:Version string:Basic	hwVer (eqpt:Fru:hwVer) The hardware version of a card.

Defined in: eqpt:Comp
naming:Descr string:Basic	descr (eqpt:Comp:descr) Additional descriptive information about the object.
scalar:Date	mfgTm (eqpt:Comp:mfgTm) The manufacturing time.
eqpt:Model string:Basic	model (eqpt:Comp:model) The model of the component.
eqpt:Revision string:Basic	rev (eqpt:Comp:rev) The revision number.
eqpt:Serial string:Basic	ser (eqpt:Comp:ser) The serial number.
eqpt:Vendor string:Basic	vendor (eqpt:Comp:vendor) The vendor.

Defined in: eqpt:Item
eqpt:Id scalar:Uint32	id (eqpt:Item:id) The item identifier.

Defined in: mo:TopProps
mo:ModificationChildAction scalar:Bitmask32	childAction (mo:TopProps:childAction) Delete or ignore. For internal use only.
reference:BinRef	dn (mo:TopProps:dn) A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN	rn (mo:TopProps:rn) Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus scalar:Bitmask32	status (mo:TopProps:status) The upgrade status. This property is for internal use only.

Defined in: mo:Modifiable
mo:TStamp scalar:Date	modTs (mo:Modifiable:modTs) The time when this object was last modified.

Properties Detail

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction

Comments:

Delete or ignore. For internal use only.

Constants
deleteAll	16384u	deleteAll	NO COMMENTS
ignore	4096u	ignore	NO COMMENTS
deleteNonPresent	8192u	deleteNonPresent	NO COMMENTS
DEFAULT	0	---	This type is used to

descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

Comments:

Additional descriptive information about the object.

dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn

Comments:

A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

hwVer

Type: cap:Version
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Comments:

The hardware version of a card.

id

Type: eqpt:Id
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The item identifier.

macB

Type: eqpt:MacAddr
Primitive Type: string:Basic

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Comments:

The MAC address base.

macL

Type: eqpt:MacAddrLen
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Comments:

The MAC address length.

mfgTm

Type: scalar:Date

Like: eqpt:Mfg:mfgTm
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The manufacturing time.

Constants
not-applicable	0ull	N/A	NO COMMENTS
DEFAULT	not-applicable(0ull)	N/A	NO COMMENTS

modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The time when this object was last modified.

Constants
never	0ull	never	NO COMMENTS
DEFAULT	never(0ull)	never	NO COMMENTS

model

Type: eqpt:Model
Primitive Type: string:Basic

Like: eqpt:Dev:model
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The model of the component.

monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The monitoring policy associated with the supervisor card.

numP

Type: eqpt:CardNumPorts
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The number of ports on the card.

Constants
defaultValue	0	---	NO COMMENTS

operSt

Type: eqpt:COpSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Comments:

The operational status.

Constants
unknown	0	Unknown	Unknown
inserted	1	Inserted	Inserted
absent	2	Absent	Absent
mismatch	3	Mismatch	Mismatch slot
fail	4	Failed	Fail state
present	5	Present	Present state
removed	6	Removed	Removed state
online	7	Online	Online state
offline	8	Offline	Offline state
pwr-up	9	Powered up	powered-up state
pwr-down	10	Powered down	powered-down state
err-pwr-down	11	Errored powered down	err-powered-down state
testing	12	Testing	waiting for diag results state
init	13	Initializing	initializing state
reg-failure	14	Registration failed	registration failure state
dnld	15	Downloading	downloading state
upg	16	Upgrading	upgrading state
srg-fail	17	SRG failed	srg failure state
ha-seq-fail	18	HA Sequence number failed	HA SEQNO failure state
DEFAULT	unknown(0)	Unknown	Unknown

pwrSt

Type: eqpt:PwrState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

Constants
unknown	0	Unknown	Unknown
off	1	Off	admin powered off
on	2	On	admin powered on
deny	3	Deny	oper power deny
multi-boot-fail	4	Multiple boot failure	oper powered off due to multiple bootup attempt failures
DEFAULT	unknown(0)	Unknown	Unknown

rdSt

Type: eqpt:RdSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

Comments:

The redundancy state.

Constants
unknown	0	Unknown	Unknown
active	1	Active	Active state
standby	2	Standby	Standby state
DEFAULT	unknown(0)	Unknown	Unknown

rev

Type: eqpt:Revision
Primitive Type: string:Basic

Like: eqpt:Dev:rev
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The revision number.

Constants
defaultValue	"0"	---	NO COMMENTS

rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn

Comments:

Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

ser

Type: eqpt:Serial
Primitive Type: string:Basic

Like: eqpt:Dev:ser
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The serial number.

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus

Comments:

The upgrade status. This property is for internal use only.

Constants
created	2u	created	In a setter method: specifies that an object should be created. An error is returned if the object already exists. In the return value of a setter method: indicates that an object has been created.
modified	4u	modified	In a setter method: specifies that an object should be modified In the return value of a setter method: indicates that an object has been modified.
deleted	8u	deleted	In a setter method: specifies that an object should be deleted. In the return value of a setter method: indicates that an object has been deleted.
DEFAULT	0	---	This type controls the life cycle of objects passed in the XML API. When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed. In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed. When invoking a setter method, the ModificationStatus is optional: If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.

swCId

Type: eqpt:CardId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The software card ID

type

Type: eqpt:CardT
Primitive Type: scalar:Enum16

Overrides:eqpt:Card:type

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The supervisor card type.

Constants
unknown	0	Unknown	Invalid card type
supervisor	1	Supervisor	Supervisor card type
linecard	2	Line card	Linecard card type
fabriccard	3	Fabric card	Fabric card type
sysctrlcard	4	System control card	System control card type
extchcard	5	Extension chassis card	Extension chassis card type
fan-tray	6	fan tray	fan-tray FRU type
power-supply	7	power supply	power-supply FRU type
motherboard	8	motherboard	motherboard type
DEFAULT	supervisor(1)	Supervisor	Supervisor card type

upTs

Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

vendor

Type: eqpt:Vendor
Primitive Type: string:Basic

Like: eqpt:Dev:vendor
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Comments:

The vendor.

Constants
defaultValue	"Cisco Systems, Inc"	---	NO COMMENTS

Overview

Naming

Diagram

Containers

Contained

Inheritance

Stat Counters

Stats

Events

Faults

FSMs

Properties Summary

Properties Detail