Class nw:Ep (ABSTRACT)

Class ID:3566
Class Label: Endpoint
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [admin]
Creatable/Deletable: no (see Container Mos for details)
Possible Semantic Scopes: EPG, Infra, Fabric,
Semantic Scope Evaluation Rule: Subclasses
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: false, HasStats: false, HasFaults: false, HasHealth: false, HasEventRules: false ]

DN FORMAT: 

                

Diagram

Super Mo: nw:Conn, Sub Mos: coop:Ep, l2:MacEp, l3:IpEp, nw:ConnEp,

Inheritance

nw:Item Ignore.  ├ nw:Conn A connection abstraction.    ├ nw:Ep A static endpoint.      ├ coop:Ep The COOP static endpoint.      ├ l2:MacEp A static Mac endpoint.      ├ l3:IpEp  Static IP end point      ├ nw:ConnEp A connection endpoint abstraction.        ├ fv:PathEp An endpoint path.        ├ nw:AdjEp The adjacency endpoint. This is the endpoint object that contains information regarding dynamically learned endpoints.          ├ lldp:AdjEp The LLDP neighbors, which contains the information regarding the neighbors.          ├ nw:ProtAdjEp A protocol adjacency endpoint abstraction.            ├ l1:ProtAdjEp A protocol adjacency abstraction.            ├ l2:ProtAdjEp A protocol adjacency abstraction.              ├ cdp:AdjEp The CDP neighbor information. CDP is enabled by default on all supported interfaces.              ├ lacp:AdjEp The LACP neighbor information.            ├ l3:ProtAdjEp A layer 3 protocol adjacency abstraction.              ├ arp:AAdjEp The abstraction of an ARP adjacency information object endpoint. This encapsulates static and dynamic endpoint objects.                ├ arp:AdjEp The adjacency endpoint. This is the endpoint object that contains information regarding dynamically learned endpoints.                ├ arp:StAdjEp The ARP static adjacency endpoint, which is the endpoint object that contains information regarding statically configured endpoints. This is a statically configured endpoint corresponding to an interface.                ├ arp:SvcAdjEp  Service arp adjacency definitions              ├ bgp:LocalAsn The local autonomous system (AS) information pertaining to a peer.              ├ bgp:Peer The BGP information pertaining to a peer.              ├ bgp:PeerEntry The BGP peer status specifies the status of a relationship between BGP speakers. A BGP speaker does not discover another BGP speaker automatically. You must configure the relationships between BGP speakers. A BGP peer is a BGP speaker that has an active TCP connection to another BGP speaker.              ├ coop:AdjEp The abstract class for all types of COOP adjacencies.                ├ coop:OracleAdj The adjacency to the Oracle node information.              ├ coop:CitizenAdj The adjacency to the citizen node.              ├ eigrp:AdjEp The neighbor information.              ├ isis:AdjEp The ISIS adjacency neighbor endpoint is a managed object that captures ISIS adjacency specific information such as peer system identifier and peer circuit identifier.              ├ nd:AAdjEp The neighbor discovery adjacency records.                ├ nd:AdjEp The neighbor discovery adjacency endpoint. This is the endpoint object that contains information regarding dynamically learned endpoints.                ├ nd:StAdjEp The static neighbor discovery adjacency definitions.                ├ nd:SvcAdjEp  Service nd adjacency definitions              ├ ospf:AAdjEp An abstraction of an OSPF adjacent endpoint.                ├ ospf:AdjEp An adjacency endpoint contains information regarding dynamically learned endpoints.                ├ ospfv3:AdjEp The neighbor information.              ├ rtdmc:AAdjEp  This object holds rtdmc neighbor information                ├ pim:AdjEp PIM neighbor information.          ├ udld:AdjEp  This object holds udld neighbor information        ├ nw:If The interface information.          ├ l1:If An abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces.            ├ l1:EthIf An abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces.              ├ cnw:AggrIf The aggregated interface assigned to the node cluster.              ├ cnw:PhysIf The physical interface assigned to the node cluster.              ├ l1:PhysIf The object that represents the Layer 1 physical Ethernet interface information object.              ├ pc:AggrIf The aggregated interface, which is a collection of physical ports; aka port channel            ├ mgmt:MgmtIf The management interface.          ├ nw:LogicalIf A logical interface abstraction.            ├ l2:FcIf  Abstraction for a fiber channel interface in the system. The properties apply to all types of fiber channel interfaces              ├ l2:VfcIf  An fiber channel interface properties            ├ l2:If The layer 2 configured interface allows traffic of multiple VLANs over a single link and also extends VLANs across the network. All Layer 2 switching ports maintain MAC address tables.              ├ l2:BrIf The L2 bridged interface.              ├ l2:ExtIf The FEX fabric interface.              ├ l2:InbandIf The in-band interface.            ├ l3:If An abstract layer 3 interface.              ├ l3:EncRtdIf The routed interface corresponds to a sub-interface in Cisco’s routing terminology. A sub-interface is a logical L3 interface created on an underlying physical L3 port (the parent interface). Each sub-interface is associated with an 802.1Q VLAN tag. The traffic that comes on the parent interface with that tag is considered for that sub-interface. The existence of a routed interface under a VRF or infra VRF also implies that the interface belo...              ├ l3:LbRtdIf The routed loopback interface.              ├ l3:RtdIf A target relation to the routed concrete interface. This corresponds to a physical L3 interface. The existence of a routed concrete interface under a VRF or infra VRF also implies that interface belongs to that VRF. An L3 interface can belong to only one VRF at a time.              ├ mgmt:RtdMgmtIf Routed management interface              ├ svi:If A routed VLAN interface.            ├ nw:ProtIf A protocol interface abstraction.              ├ l1:ProtIf A protocol interface abstraction.              ├ l2:ProtIf A protocol interface abstraction.                ├ cdp:If CDP information that is operated at a interface level. CDP is used to obtain protocol addresses of neighboring devices and discover the platform of those devices. CDP is also used to display information about the neighboring interfaces/devices.                ├ dot1x:If  This object holds dot1x information that is operated at a interface level                ├ ipmcsnoop:If  This object holds IP Multicast snooping interface information that is operated at a interface                  ├ ipmcsnoop:StRtrIf  Multicast router if that is configured statically                    ├ igmpsnoop:StRtrIf This object represents the multicast router if that is configured statically.                    ├ mldsnoop:StRtrIf  Multicast router if that is configured statically                ├ lacp:If The LACP information that is operated at an interface (member port of the port channel) level.                ├ lldp:If The LLDP interface, which holds the operational states.                ├ macsec:AIf  This object holds macsec information that is operated at a interface level                  ├ macsec:FabIf                   ├ macsec:If                 ├ mcp:If The Mis-cabling Protocol (MCP) configured interface. The interface type can be physical Ethernet Interface or the Port-Channel Interface. The MCP packets are sent over the logic interfaces.                ├ poe:If  This object holds Power over Ethernet information that is operated at a interface level                ├ stp:If A container for the MCP information that is operated at a interface level.                ├ udld:If  This object holds udld information that is operated at a interface level              ├ l3:ProtIf A layer 3 protocol interface abstraction.                ├ arp:If The ARP Interface. This is configured to contain ARP specific interface information and contains statically configured adjacency endpoint(s).                ├ bfd:If  This object holds bfd interface information                ├ dhcp:If The DHCP information that is operated at an interface level.                  ├ dhcp:ClientIf Used for showing client functionality on the interface.                  ├ dhcp:PseudoIf The Psuedo Interface definition.                  ├ dhcp:RelayIf DHCP relay if used for representing relay functionality on the interface.                  ├ dhcp:ServerIf DHCP server if not supported; defined for completeness.                ├ eigrp:If An EIGRP configured interface combines the benefits of distance vector protocols with the features of link-state protocols.                ├ hsrp:If  This object holds interface information                ├ icmp:If The ICMP information operated at the interface level.                  ├ icmpv4:If Internet Control Message Protocol (ICMPv4) information that is operated at the interface level.                ├ icmpv6:If Per Internet Control Message Protocol (ICMPv6) information that is operated at the interface level.                ├ igmp:ExtIf  This objects hold per igmp external interface information                ├ ip:If The IP information that is operated at an interface level.                  ├ ipv4:If A container for IPV4 information that is operated at an interface level.                  ├ ipv6:If The IPv6 interface information.                ├ ipmc:AIf  This object holds IP Multicast Routing interface information that is operated at a interface                  ├ igmp:If  This objects hold per igmp interface information                ├ isis:ExtIf  This object holds isis information that is operated at a interface level, specific to external interfaces                ├ isis:If The ISIS interface holds ISIS information that is operated at an interface level.                ├ nd:If The per ND protocol interface information.                ├ ospf:AIf An abstraction of the OSPF information that is operated at an interface level.                  ├ ospf:If The OSPF information that is operated at an interface level.                  ├ ospfv3:If An OSPF interface.                ├ ptp:If  This object holds interface information                ├ rtdmc:AIf  This object holds routed multicast information that is operated at a interface level                  ├ pim:If PIM interface information.            ├ regress:If This is generated and used only by internal processes.            ├ tunnel:If A tunnel interface.        ├ nw:PathEp An abstraction of an endpoint path.        ├ tunnel:Ep An abstraction of a tunnel endpoint.          ├ tunnel:DEp A discovered tunnel endpoint.            ├ bgp:DTEp  Tunnel endpoints discovered through bgp            ├ coop:DTEp  Tunnel endpoints discovered through coop            ├ epm:DTEp  Tunnel endpoints discovered through epm            ├ isis:DTEp The discovered IP security (IPsec) endpoints. The deployment of IPsec with Internet Key Exchange (IKE) requires the configuration of a crypto map for every peer which identifies the endpoint to which a secure tunnel is to be established.            ├ svccopy:DTEp  Tunnel endpoints learnt through svc dest

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction

Delete or ignore. For internal use only.

dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn

A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:Conn:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

The name of the object.

rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn

Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus

The upgrade status. This property is for internal use only.