Class ospfv3:If (CONCRETE)

Class ID:5828
Class Label: OSPF Interface
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-protocol-l3, admin, fabric-protocol-l3, tenant-ext-protocol-l3, tenant-protocol-l3]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: Fabric
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: true ]

RN FORMAT: if-{[id]}

    [1] PREFIX=if- PROPERTY = id




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/ospfv3/inst-{name}/dom-{name}/if-{[id]}

[1] sys/ospfv3/inst-{name}/dom-{name}/if-{[id]}

                

Diagram

Super Mo: ospf:AIf, Container Mos: ospfv3:Dom (deletable:no), Contained Mos: ospfv3:AdjEp, ospfv3:Db, ospfv3:IfStats, ospfv3:TrafficStats, Relations From: nw:PathEp, ospf:IfDef, Relations To: ipsec:StSecAssoc, Relations: nw:RtPathToIf, ospfv3:RsIfSecAssocAtt, ospfv3:RtIfDefToOspfv3If,

Containers Hierarchies

top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...          ├ ospfv3:Entity The OSPFV3 control plane entity information.            ├ ospfv3:Inst The per OSPF instance information.              ├ ospfv3:Dom The OSPF domain (VRF) information.                ├ ospfv3:If An OSPF interface. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...    ├ ospfv3:Entity The OSPFV3 control plane entity information.      ├ ospfv3:Inst The per OSPF instance information.        ├ ospfv3:Dom The OSPF domain (VRF) information.          ├ ospfv3:If An OSPF interface.

Contained Hierarchy

ospfv3:If An OSPF interface.  ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.  ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.  ├ health:Inst A base class for a health score instance.(Switch only)  ├ nw:RtPathToIf A target relation to the interface information.  ├ ospfv3:AdjEp The neighbor information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ ospfv3:AdjStats The OSPFV3 neighborship statistics.    ├ ospfv3:GrSt The OSPF graceful restart operational information.  ├ ospfv3:Db The OSPF databases.    ├ ospfv3:LsaRec The LSA records information.    ├ ospfv3:Route The internal OSPF routes in the OSPF RIB (Routing Information Base).      ├ ospfv3:McNexthop The OSPF Multicast Nexthop information.      ├ ospfv3:UcNexthop The unicast nexthop information.  ├ ospfv3:IfStats The OSPF interface related statistics.  ├ ospfv3:RsIfSecAssocAtt  ipsec SA  ├ ospfv3:RtIfDefToOspfv3If A target relation to OSPF information that is operated at a interface level.  ├ ospfv3:TrafficStats The OSPF domain traffic statistics.

Inheritance

nw:Item Ignore.  ├ nw:Conn A connection abstraction.    ├ nw:Ep A static endpoint.      ├ nw:ConnEp A connection endpoint abstraction.        ├ nw:If The interface information.          ├ nw:LogicalIf A logical interface abstraction.            ├ nw:ProtIf A protocol interface abstraction.              ├ l3:ProtIf A layer 3 protocol interface abstraction.                ├ ospf:AIf An abstraction of the OSPF information that is operated at an interface level.                  ├ ospfv3:If An OSPF interface.

                ospfv3:If:ospfv3_If_ifOperStChange

                

                ospf:AIf:P2PError

                

addr

Type: address:Ip

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The peer IP address.

adminSt

Type: nw:IfAdminSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The administrative state of the object or policy.

area

Type: ospf:AreaId
Primitive Type: address:IPv4

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The OSPF Area ID. An area is a logical collection of OSPF networks, routers, and links that have the same area identification. A router within an area must maintain a topological database for the area to which it belongs. The router doesn't have detailed information about network topology outside of its area, thereby reducing the size of its database. Areas limit the scope of route information distribution. It is not possible to do route update filtering within an area. The link-state database (LSDB) of routers within the same area must be synchronized and be exactly the same; however, route summarization and filtering is possible between different areas. The main benefit of creating areas is a reduction in the number of routes to propagate-by the filtering and the summarization of routes. Areas are identified by an area ID. Cisco IOS software supports area IDs expressed in IP address format or decimal format, for example, area 0.0.0.0 is equal to area 0.

bdr

Type: address:Ip

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The OSPF backup designated router IP address.

bdrId

Type: ip:RtrId
Primitive Type: address:IPv4

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

A backup designated router ID.

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction

Delete or ignore. For internal use only.

cost

Type: ospf:IfCost
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The OSPF Area cost for the default summary LSAs. The Area cost is used with NSSA and stub area types only.

ctrl

Type: ospf:IfControl
Primitive Type: scalar:Bitmask8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The control state.

deadIntvl

Type: ospf:DeadIntvl
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular

The interval between hello packets from a neighbor before the router declares the neighbor as down. This value must be the same for all networking devices on a specific network. Specifying a smaller dead interval (seconds) will give faster detection of a neighbor being down and improve convergence, but might cause more routing instability.

descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn

A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.

dr

Type: address:Ip

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

A designated router address.

drId

Type: ip:RtrId
Primitive Type: address:IPv4

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

A designated router ID.

failStQual

Type: ospf:FailStQual
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The OSPF domain failed state qualifier.

flags

Type: ospf:IfFlags
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The IP address flags.

helloIntvl

Type: ospf:HelloIntvl
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular

The hello interval.

id

Type: nw:IfId
Primitive Type: base:IfIndex

Overrides:nw:If:id

Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular

An object identifier.

lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

A value that indicates how this object was created. For internal use only.

lsaCksumSum

Type: ospf:LsaCksumSum
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The LSA checksum sum.

modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The time when this object was last modified.

monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The monitoring policy attached to this observable object.

name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:Conn:name

Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular

The name of the object.

nwT

Type: ospf:NwT
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

operCost

Type: ospf:IfCost
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The route summary cost.

operSt

Type: ospf:IfOperSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The runtime state of the object or policy.

p2pOperSt

Type: ospf:P2PIfOperSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

P2P Interface Operational state

pfxSuppress

Type: ospf:IfPfxSuppress
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

Configure prefix suppression

prio

Type: ospf:DesigPrio
Primitive Type: scalar:UByte

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular

The QoS priority class ID.

rexmitIntvl

Type: ospf:RexmitIntvl
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular

The interval between LSA retransmissions. The retransmit interval occurs while the router is waiting for an acknowledgement from the neighbor router that it received the LSA. If no acknowlegment is received at the end of the interval, then the LSA is resent.

rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn

Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus

The upgrade status. This property is for internal use only.

type

Type: ospf:IfType
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular

The specific type of the object or component.

xmitDelay

Type: ospf:XmitDelay
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular

The delay time needed to send an LSA update packet. OSPF increments the LSA age time by the transmit delay amount before transmitting the LSA update. You should take into account the transmission and propagation delays for the interface when you set this value.