Class ospf:If (CONCRETE)

Class ID:2655
Class Label: OSPF Interface
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-protocol-l3, admin, fabric-protocol-l3, tenant-ext-protocol-l3, tenant-protocol-l3]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: Fabric
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: true ]

The OSPF information that is operated at an interface level.

Naming Rules
RN FORMAT: if-{[id]}

    [1] PREFIX=if- PROPERTY = id




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/ospf/inst-{name}/dom-{name}/if-{[id]}

[1] sys/ospf/inst-{name}/dom-{name}/if-{[id]}

                


Diagram

Super Mo: ospf:AIf,
Container Mos: ospf:Dom (deletable:no),
Contained Mos: ospf:AdjEp, ospf:AuthP, ospf:Db, ospf:IfStats, ospf:TrafficStats,
Relations From: nw:PathEp, ospf:IfDef,
Relations: nw:RtPathToIf, ospf:RtIfDefToOspfIf,


Containers Hierarchies
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] fabric:Topology The root for IFC topology.
 
 ├
[V] fabric:Pod A pod.
 
 
 ├
[V] fabric:Node The root node for the APIC.
 
 
 
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 
 
 
 ├
[V] ospf:Entity The OSPF control plane entity information.
 
 
 
 
 
 ├
[V] ospf:Inst The per OSPF instance information.
 
 
 
 
 
 
 ├
[V] ospf:Dom The per OSPF domain (vrf) information.
 
 
 
 
 
 
 
 ├
[V] ospf:If The OSPF information that is operated at an interface level.
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 ├
[V] ospf:Entity The OSPF control plane entity information.
 
 
 ├
[V] ospf:Inst The per OSPF instance information.
 
 
 
 ├
[V] ospf:Dom The per OSPF domain (vrf) information.
 
 
 
 
 ├
[V] ospf:If The OSPF information that is operated at an interface level.


Contained Hierarchy
[V] ospf:If The OSPF information that is operated at an interface level.
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 ├
[V] nw:RtPathToIf A target relation to the interface information.
 ├
[V] ospf:AdjEp An adjacency endpoint contains information regarding dynamically learned endpoints.
 
 ├
[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 ├
[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 ├
[V] health:Inst A base class for a health score instance.(Switch only)
 
 ├
[V] ospf:AdjStats The OSPF neighbor-related statistics.
 
 ├
[V] ospf:GrSt OSPF graceful restart operational information.
 ├
[V] ospf:AuthP The OSPF authentication policy information.
 
 ├
[V] fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.
 ├
[V] ospf:Db The OSPF database information.
 
 ├
[V] ospf:LsaRec The LSA records information.
 
 ├
[V] ospf:Route The OSPF route information is used to establish OSPF sessions between peers.
 
 
 ├
[V] ospf:McNexthop The OSPF Multicast Nexthop information.
 
 
 ├
[V] ospf:UcNexthop The Unicast Nexthop information.
 ├
[V] ospf:IfStats The OSPF interface related statistics.
 ├
[V] ospf:RtIfDefToOspfIf A target relation to the OSPF information that is operated at an interface level.
 ├
[V] ospf:TrafficStats The OSPF domain traffic statistics.


Inheritance
[V] nw:Item Ignore.
 ├
[V] nw:Conn A connection abstraction.
 
 ├
[V] nw:Ep A static endpoint.
 
 
 ├
[V] nw:ConnEp A connection endpoint abstraction.
 
 
 
 ├
[V] nw:If The interface information.
 
 
 
 
 ├
[V] nw:LogicalIf A logical interface abstraction.
 
 
 
 
 
 ├
[V] nw:ProtIf A protocol interface abstraction.
 
 
 
 
 
 
 ├
[V] l3:ProtIf A layer 3 protocol interface abstraction.
 
 
 
 
 
 
 
 ├
[V] ospf:AIf An abstraction of the OSPF information that is operated at an interface level.
 
 
 
 
 
 
 
 
 ├
[V] ospf:If The OSPF information that is operated at an interface level.


Events
                ospf:If:ospf_If_ifOperStChange


Faults
                ospf:AIf:P2PError


Fsms
                


Properties Summary
Defined in: ospf:If
nw:IfId
          base:IfIndex
id  (ospf:If:id)
           Overrides:nw:If:id
           The OSPF interface ID.
reference:BinRef monPolDn  (ospf:If:monPolDn)
           The monitoring policy attached to this observable object.
Defined in: ospf:AIf
address:Ip addr  (ospf:AIf:addr)
           The peer IP address.
ospf:AreaId
          address:IPv4
area  (ospf:AIf:area)
           The OSPF Area ID. An area is a logical collection of OSPF networks, routers, and links that have the same area identification. A router within an area must maintain a topological database for the area to which it belongs. The router doesn't have detailed information about network topology outside of its area, thereby reducing the size of its database. Areas limit the scope of route information distribution. It is not possible to do route update filtering within an area. The link-state database (LSDB) of routers within the same area must be synchronized and be exactly the same; however, route summarization and filtering is possible between different areas. The main benefit of creating areas is a reduction in the number of routes to propagate-by the filtering and the summarization of routes. Areas are identified by an area ID. Cisco IOS software supports area IDs expressed in IP address format or decimal format, for example, area 0.0.0.0 is equal to area 0.
address:Ip bdr  (ospf:AIf:bdr)
           The OSPF backup designated router IP address.
ip:RtrId
          address:IPv4
bdrId  (ospf:AIf:bdrId)
           A backup designated router ID.
ospf:IfCost
          scalar:Uint16
cost  (ospf:AIf:cost)
           The OSPF Area cost for the default summary LSAs. The Area cost is used with NSSA and stub area types only.
ospf:IfControl
          scalar:Bitmask8
ctrl  (ospf:AIf:ctrl)
           The control state.
ospf:DeadIntvl
          scalar:Uint16
deadIntvl  (ospf:AIf:deadIntvl)
           The interval between hello packets from a neighbor before the router declares the neighbor as down. This value must be the same for all networking devices on a specific network. Specifying a smaller dead interval (seconds) will give faster detection of a neighbor being down and improve convergence, but might cause more routing instability.
address:Ip dr  (ospf:AIf:dr)
           A designated router address.
ip:RtrId
          address:IPv4
drId  (ospf:AIf:drId)
           A designated router ID.
ospf:FailStQual
          scalar:Bitmask64
failStQual  (ospf:AIf:failStQual)
           The OSPF domain failed state qualifier.
ospf:IfFlags
          scalar:Bitmask32
flags  (ospf:AIf:flags)
           The IP address flags.
ospf:HelloIntvl
          scalar:Uint16
helloIntvl  (ospf:AIf:helloIntvl)
           The hello interval.
ospf:LsaCksumSum
          scalar:Uint32
lsaCksumSum  (ospf:AIf:lsaCksumSum)
           The LSA checksum sum.
ospf:NwT
          scalar:Enum8
nwT  (ospf:AIf:nwT)
           The OSPF interface policy network type. OSPF supports point-to-point and broadcast.
ospf:IfCost
          scalar:Uint16
operCost  (ospf:AIf:operCost)
           The route summary cost.
ospf:IfOperSt
          scalar:Enum8
operSt  (ospf:AIf:operSt)
           The runtime state of the object or policy.
ospf:P2PIfOperSt
          scalar:Enum8
p2pOperSt  (ospf:AIf:p2pOperSt)
           P2P Interface Operational state
ospf:IfPfxSuppress
          scalar:Enum8
pfxSuppress  (ospf:AIf:pfxSuppress)
           Configure prefix suppression
ospf:DesigPrio
          scalar:UByte
prio  (ospf:AIf:prio)
           The QoS priority class ID.
ospf:RexmitIntvl
          scalar:Uint16
rexmitIntvl  (ospf:AIf:rexmitIntvl)
           The interval between LSA retransmissions. The retransmit interval occurs while the router is waiting for an acknowledgement from the neighbor router that it received the LSA. If no acknowlegment is received at the end of the interval, then the LSA is resent.
ospf:IfType
          scalar:Enum8
type  (ospf:AIf:type)
           The specific type of the object or component.
ospf:XmitDelay
          scalar:Uint16
xmitDelay  (ospf:AIf:xmitDelay)
           The delay time needed to send an LSA update packet. OSPF increments the LSA age time by the transmit delay amount before transmitting the LSA update. You should take into account the transmission and propagation delays for the interface when you set this value.
Defined in: nw:ProtIf
nw:IfAdminSt
          scalar:Enum8
adminSt  (nw:ProtIf:adminSt)
           The administrative state of the object or policy.
Defined in: nw:If
naming:Descr
          string:Basic
descr  (nw:If:descr)
          
Defined in: nw:Ep
naming:Name
          string:Basic
name  (nw:Ep:name)
           Overrides:nw:Conn:name
           The name of the object.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32
childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32
status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Defined in: mo:Resolvable
mo:Owner
          scalar:Enum8
lcOwn  (mo:Resolvable:lcOwn)
           A value that indicates how this object was created. For internal use only.
Defined in: mo:Modifiable
mo:TStamp
          scalar:Date
modTs  (mo:Modifiable:modTs)
           The time when this object was last modified.
Properties Detail

addr

Type: address:Ip

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The peer IP address.



adminSt

Type: nw:IfAdminSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The administrative state of the object or policy.
Constants
enabled 1 Enabled Enabled
disabled 2 Disabled Disabled
DEFAULT enabled(1) Enabled Enabled





area

Type: ospf:AreaId
Primitive Type: address:IPv4

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The OSPF Area ID. An area is a logical collection of OSPF networks, routers, and links that have the same area identification. A router within an area must maintain a topological database for the area to which it belongs. The router doesn't have detailed information about network topology outside of its area, thereby reducing the size of its database. Areas limit the scope of route information distribution. It is not possible to do route update filtering within an area. The link-state database (LSDB) of routers within the same area must be synchronized and be exactly the same; however, route summarization and filtering is possible between different areas. The main benefit of creating areas is a reduction in the number of routes to propagate-by the filtering and the summarization of routes. Areas are identified by an area ID. Cisco IOS software supports area IDs expressed in IP address format or decimal format, for example, area 0.0.0.0 is equal to area 0.
Constants
backbone 0u Backbone area NO COMMENTS
defaultValue 1u --- NO COMMENTS





bdr

Type: address:Ip

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The OSPF backup designated router IP address.



bdrId

Type: ip:RtrId
Primitive Type: address:IPv4

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
A backup designated router ID.



childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to





cost

Type: ospf:IfCost
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The OSPF Area cost for the default summary LSAs. The Area cost is used with NSSA and stub area types only.
Constants
unspecified 0 Unspecified NO COMMENTS
DEFAULT unspecified(0) Unspecified NO COMMENTS





ctrl

Type: ospf:IfControl
Primitive Type: scalar:Bitmask8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The control state.
Constants
unspecified 0 Unspecified Unspecified
passive 1 Passive participation Passive, the interface doesn't participate in OSPF protocol and will not establish adjacencies or send routing updates. However the interface is announced as part of the routing network
mtu-ignore 2 MTU ignore MTU ignore, disables MTU mismatch detection on an interface.
advert-subnet 4 Advertise subnet Advertise ip subnet instead of a host mask in the router LSA
bfd 8 BFD Bidirectional Forwarding Detection
DEFAULT unspecified(0) Unspecified Unspecified





deadIntvl

Type: ospf:DeadIntvl
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The interval between hello packets from a neighbor before the router declares the neighbor as down. This value must be the same for all networking devices on a specific network. Specifying a smaller dead interval (seconds) will give faster detection of a neighbor being down and improve convergence, but might cause more routing instability.
Constants
defaultValue 40 --- NO COMMENTS





descr

Type: naming:Descr
Primitive Type: string:Basic

Like: naming:Described:descr
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
    Comments:



dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.



dr

Type: address:Ip

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
A designated router address.



drId

Type: ip:RtrId
Primitive Type: address:IPv4

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
A designated router ID.



failStQual

Type: ospf:FailStQual
Primitive Type: scalar:Bitmask64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The OSPF domain failed state qualifier.
Constants
unspecified 0ull Unspecified Unspecified
ipc-error 16ull IPC error IPC error
init-error 1ull Initialization error Initialization error
ha-error 2ull HA error HA error
rib-error 32ull RIB programming error RIB error
proto-error 4ull Protocol error Protocol error
mem-error 8ull Memory error Memory error
DEFAULT unspecified(0ull) Unspecified Unspecified





flags

Type: ospf:IfFlags
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The IP address flags.
Constants
unspecified 0u Unspecified Unspecified
admin-up 1u Admin up Admin up
proto-up 2u Proto up Proto up
DEFAULT unspecified(0u) Unspecified Unspecified





helloIntvl

Type: ospf:HelloIntvl
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The hello interval.
Constants
defaultValue 10 --- NO COMMENTS





id

Type: nw:IfId
Primitive Type: base:IfIndex

Overrides:nw:If:id
Units: null Encrypted: false Naming Property -- [NAMING RULES] Access: naming Category: TopLevelRegular
    Comments:
The OSPF interface ID.



lcOwn

Type: mo:Owner
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
A value that indicates how this object was created. For internal use only.
Constants
local 0 Local NO COMMENTS
policy 1 Policy NO COMMENTS
replica 2 Replica NO COMMENTS
resolveOnBehalf 3 ResolvedOnBehalf NO COMMENTS
implicit 4 Implicit NO COMMENTS
DEFAULT local(0) Local NO COMMENTS





lsaCksumSum

Type: ospf:LsaCksumSum
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The LSA checksum sum.



modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The time when this object was last modified.
Constants
never 0ull never NO COMMENTS
DEFAULT never(0ull) never NO COMMENTS





monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The monitoring policy attached to this observable object.



name

Type: naming:Name
Primitive Type: string:Basic

Overrides:nw:Conn:name
Units: null Encrypted: false Access: admin Category: TopLevelRegular
    Comments:
The name of the object.



nwT

Type: ospf:NwT
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The OSPF interface policy network type. OSPF supports point-to-point and broadcast.
Constants
unspecified 0 Unspecified Unspecified
p2p 1 Point-to-point p2p interface
bcast 2 Broadcast Broadcast interface
DEFAULT unspecified(0) Unspecified Unspecified





operCost

Type: ospf:IfCost
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The route summary cost.
Constants
unspecified 0 Unspecified NO COMMENTS
DEFAULT unspecified(0) Unspecified NO COMMENTS





operSt

Type: ospf:IfOperSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The runtime state of the object or policy.
Constants
unknown 0 Unknown Unknown state
down 1 Down Down state
loopback 2 Loopback Loopback state
waiting 3 Waiting Waiting state
p2p 4 p2p p2p state
dr 5 DR DR state
bdr 6 BDR BDR state
dr-other 7 DR-other DROther state
DEFAULT down(1) Down Down state





p2pOperSt

Type: ospf:P2PIfOperSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
P2P Interface Operational state
Constants
ok 0 ok Operating normally
nbr-exceeded 1 Neighbors limit on P2P interface exceeded Neighbor limit exceeded
DEFAULT ok(0) ok Operating normally





pfxSuppress

Type: ospf:IfPfxSuppress
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
Configure prefix suppression
Constants
inherit 0 Inherit Inherit
enable 1 Enable Enable
disable 2 Disable Disable
DEFAULT inherit(0) Inherit Inherit





prio

Type: ospf:DesigPrio
Primitive Type: scalar:UByte

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The QoS priority class ID.
Constants
defaultValue 1 --- NO COMMENTS





rexmitIntvl

Type: ospf:RexmitIntvl
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The interval between LSA retransmissions. The retransmit interval occurs while the router is waiting for an acknowledgement from the neighbor router that it received the LSA. If no acknowlegment is received at the end of the interval, then the LSA is resent.
Constants
defaultValue 5 --- NO COMMENTS





rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.



status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.






type

Type: ospf:IfType
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The specific type of the object or component.
Constants
unspecified 0 Unspecified Unspecified
loopback 1 Loopback Loopback type
p2p 2 P2P p2p type
p2mp 3 P2MP p2mp type
nbma 4 NBMA nbma type
bcast 5 Broadcast BDR state
DEFAULT unspecified(0) Unspecified Unspecified





xmitDelay

Type: ospf:XmitDelay
Primitive Type: scalar:Uint16

Units: sec
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The delay time needed to send an LSA update packet. OSPF increments the LSA age time by the transmit delay amount before transmitting the LSA update. You should take into account the transmission and propagation delays for the interface when you set this value.
Constants
defaultValue 1 --- NO COMMENTS