Class l3ext:LIfPDef (CONCRETE)

Class ID:1792
Class Label: Logical Interface Profile
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Logical Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [admin, tenant-ext-protocol-l3, tenant-qos]
Creatable/Deletable: yes (see Container Mos for details)
Semantic Scope: EPG
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: false, HasHealth: true, HasEventRules: false ]

RN FORMAT: lifp-{name}

    [1] PREFIX=lifp- PROPERTY = name




DN FORMAT: 

[0] outdefcont-{id}/rsoutDefContToOut-{[tDn]}/outdef-{name}/lnodep-{name}/lifp-{name}

[2] uni/tn-{name}/acIpToIp-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[4] uni/tn-{name}/acExtToEp-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[6] uni/tn-{name}/acEpToExt-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[8] uni/tn-{name}/acEpToEp-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[10] uni/tn-{name}/acAnyToEp-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[12] uni/tn-{name}/acEpToAny-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[14] uni/tn-{name}/epgToEp-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[16] uni/tn-{name}/epToEpg-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[18] uni/tn-{name}/ipToEpg-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[20] uni/tn-{name}/epgToIp-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[22] uni/tn-{name}/epgToEpg-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[24] uni/epp/fv-{[epgPKey]}/ac-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[26] uni/epp/rtd-{[epgPKey]}/ac-{name}/acl3outcont/outdef-{name}/lnodep-{name}/lifp-{name}

[28] uni/tn-{name}/ldevCtx-c-{ctrctNameOrLbl}-g-{graphNameOrLbl}-n-{nodeNameOrLbl}/lIfCtx-c-{connNameOrLbl}/outdef-{name}/lnodep-{name}/lifp-{name}

[30] uni/tn-{name}/outdef-{name}/lnodep-{name}/lifp-{name}

[32] uni/epp/rtd-{[epgPKey]}/lnodep-{name}/lifp-{name}

                

Diagram

Super Mo: l3ext:AIfP, Container Mos: l3ext:LNodePDef (deletable:yes), Contained Mos: arp:IfPolDef, bfd:IfDef, dhcp:LblDef, eigrp:IfDef, hsrp:IfDef, igmp:IfDef, nd:IfPolDef, netflow:ExporterPolHolder, netflow:MonitorPolHolder, ospf:IfDef, qos:EgressDppPolHolder, qos:IngressDppPolHolder, rtdmc:IPV6McastIfDefCont, rtdmc:McastIfDefCont, Relations To: fabric:PathEp, Relations: l3ext:RsPathDefL3OutAtt,

Containers Hierarchies

top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ l3ext:OutDefCont  L4L7 Services Route Peering    ├ l3ext:RsOutDefContToOut       ├ l3ext:OutDef The L4-L7 services route peering.        ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.          ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:IpToIp  IP Addr to IP policy Defn. Used for an external host identified by its IP address to another IP address                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:IpToIp  IP Addr to IP policy Defn. Used for an external host identified by its IP address to another IP address        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:ExtToEp The external host-to-endpoint atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:ExtToEp The external host-to-endpoint atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:EpToExt The endpoint-to-external IP address atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:EpToExt The endpoint-to-external IP address atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:EpToEp The endpoint-to-endpoint atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:EpToEp The endpoint-to-endpoint atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:AnyToEp Atomic counters detect drops and misrouting in the fabric enables quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:AnyToEp Atomic counters detect drops and misrouting in the fabric enables quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:EpToAny The endpoint-to-any atomic counter policy which detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:EpToAny The endpoint-to-any atomic counter policy which detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:EpgToEp The endpoint group-to-endpoint atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:EpgToEp The endpoint group-to-endpoint atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:EpToEpg The endpoint-to-endpoint group atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:EpToEpg The endpoint-to-endpoint group atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:IpToEpg The IP-to-endpoint group atomic counter policy detects drops and misrouting in the fabric and enables quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:IpToEpg The IP-to-endpoint group atomic counter policy detects drops and misrouting in the fabric and enables quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:EpgToIp The endpoint group-to-IP atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:EpgToIp The endpoint group-to-IP atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ dbgac:EpgToEpg The endpoint group-to-endpoint group atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.                  ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ dbgac:EpgToEpg The endpoint group-to-endpoint group atomic counter policy detects drops and misrouting in the fabric to enable quick debugging and isolation of application connectivity issues.        ├ dbgac:L3OutCont  Atomic counter L3Out Container MO          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:EpPCont The container for an endpoint profile.                ├ fv:EpP An endpoint profile.                  ├ dbgac:TenantSpaceCmnDef The tenant space common definition. This atomic counter managed object is used internally for managing Epg/Epp source and destination policies.                    ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                      ├ l3ext:OutDef The L4-L7 services route peering.                        ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                          ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:EpPCont The container for an endpoint profile.      ├ fv:EpP An endpoint profile.        ├ dbgac:TenantSpaceCmnDef The tenant space common definition. This atomic counter managed object is used internally for managing Epg/Epp source and destination policies.          ├ dbgac:L3OutCont  Atomic counter L3Out Container MO            ├ l3ext:OutDef The L4-L7 services route peering.              ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:EpPCont The container for an endpoint profile.                ├ fv:RtdEpP A target relation to an L3 routed outside present under a tenant.                  ├ dbgac:TenantSpaceCmnDef The tenant space common definition. This atomic counter managed object is used internally for managing Epg/Epp source and destination policies.                    ├ dbgac:L3OutCont  Atomic counter L3Out Container MO                      ├ l3ext:OutDef The L4-L7 services route peering.                        ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                          ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:EpPCont The container for an endpoint profile.      ├ fv:RtdEpP A target relation to an L3 routed outside present under a tenant.        ├ dbgac:TenantSpaceCmnDef The tenant space common definition. This atomic counter managed object is used internally for managing Epg/Epp source and destination policies.          ├ dbgac:L3OutCont  Atomic counter L3Out Container MO            ├ l3ext:OutDef The L4-L7 services route peering.              ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ vns:LDevCtx A device cluster context points to the device cluster used to pick a specific device based on contract, subject, and function label or names. To specify a wild card, set the name to Any.                  ├ vns:LIfCtx The logical interface context points to the logical interface used to pick a specific logical interface based on the connector name. To specify a wild card, set the name to Any.                    ├ l3ext:OutDef The L4-L7 services route peering.                      ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                        ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ vns:LDevCtx A device cluster context points to the device cluster used to pick a specific device based on contract, subject, and function label or names. To specify a wild card, set the name to Any.        ├ vns:LIfCtx The logical interface context points to the logical interface used to pick a specific logical interface based on the connector name. To specify a wild card, set the name to Any.          ├ l3ext:OutDef The L4-L7 services route peering.            ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.              ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.                ├ l3ext:OutDef The L4-L7 services route peering.                  ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                    ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:Tenant A policy owner in the virtual fabric. A tenant can be either a private or a shared entity. For example, you can create a tenant with contexts and bridge domains shared by other tenants. A shared type of tenant is typically named common, default, or infra.      ├ l3ext:OutDef The L4-L7 services route peering.        ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.          ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ ctx:Local The local Context.          ├ ctx:Application The context application.            ├ pol:Uni Represents policy definition/resolution universe.              ├ fv:EpPCont The container for an endpoint profile.                ├ fv:RtdEpP A target relation to an L3 routed outside present under a tenant.                  ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.                    ├ l3ext:LIfPDef The interface identifiers attached to the node profile. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ pol:Uni Represents policy definition/resolution universe.    ├ fv:EpPCont The container for an endpoint profile.      ├ fv:RtdEpP A target relation to an L3 routed outside present under a tenant.        ├ l3ext:LNodePDef The logical node profile definition. This defines the characteristics to be applied to resources that match with the profile name.          ├ l3ext:LIfPDef The interface identifiers attached to the node profile.

Contained Hierarchy

l3ext:LIfPDef The interface identifiers attached to the node profile.  ├ arp:IfPolDef     ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ bfd:IfDef     ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ dhcp:LblDef Definition of the label.    ├ dhcp:OptionDef The option definition. Each DHCP option is defined by a unique name, ID, and option data.      ├ dhcp:DiscNode The Discovered DHCP client node.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ dhcp:RsLblDefToRelayP Internal object: Relation from dhcpLblDef to dhcpRelayP.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ eigrp:IfDef The EIGRP interface definition.    ├ eigrp:AuthIfPDef  AuthPDef    ├ eigrp:RsIfDefToEigrpIf A source relation to EIGRP interfaces.    ├ eigrp:SummDef The EIGRP summary route definition.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.  ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ health:Inst A base class for a health score instance.(Switch only)  ├ hsrp:IfDef     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ hsrp:GroupDef       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ hsrp:SecVipDef         ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ igmp:IfDef     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ igmp:RepDef       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ pim:RouteMapDef PIM route map definition        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim:RouteMapEntryDef PIM route map entry definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtdmc:RtFilterToRtMapPol       ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag     ├ igmp:RsIfDefToIgmpIf  Relationship to the IGMP interfaces    ├ igmp:StRepDef       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ pim:RouteMapDef PIM route map definition        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim:RouteMapEntryDef PIM route map entry definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtdmc:RtFilterToRtMapPol       ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag     ├ igmp:StateLDef       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ pim:RouteMapDef PIM route map definition        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim:RouteMapEntryDef PIM route map entry definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtdmc:RtFilterToRtMapPol       ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag   ├ l3ext:RsPathDefL3OutAtt The object used for creating a static association with a leaf host port. Existence of this implies that the corresponding set of policies will be resolved into the node pointed to by the relationship.    ├ bgp:APeerDef  Peer connectivity definition      ├ bgp:AsDef An internal object for the BGP autonomous system profile definition.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ bgp:LocalAsnDef The local autonomous system number (ASN) definition.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ bgp:RsPeerPfxPol The source relation to the peer prefix policy.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3ext:IpDef The definition of a secondary IP address policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l3ext:RtAddrToIpDef A target relation to a secondary IP address policy definition.      ├ nd:PfxPolDef The neighbor discovery prefix policy definition.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l3ext:MemberDef The member definition. The member is used for providing per node IP address configuration. This is used internally.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l3ext:IpDef The definition of a secondary IP address policy.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l3ext:RtAddrToIpDef A target relation to a secondary IP address policy definition.        ├ nd:PfxPolDef The neighbor discovery prefix policy definition.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ nd:PfxPolDef The neighbor discovery prefix policy definition.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ nd:PfxPolDef The neighbor discovery prefix policy definition.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ nd:IfPolDef The read only copy of the neighbor discovery interface policy.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ netflow:ExporterPolHolder  Mo that will be attached to retrieve the DN of the NetflowExporterPolDef that should be downloaded on the leaf in order to program the leaf    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ netflow:MonitorPolHolder  Mo that will be attached to retrieve the DN of the NetflowMonitorPolDef that should be downloaded on the leaf in order to program the leaf    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ ospf:IfDef The OSPF interface definition model.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ ospf:AuthKeyDef  Encrypted Password    ├ ospf:RsIfDefToOspfIf A source relation to the OSPF information that is operated at an interface level.    ├ ospf:RsIfDefToOspfv3If A source relation to the OSPF v3 interfaces  ├ qos:EgressDppPolHolder  DppPolHolder for Egress direction    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ qos:IngressDppPolHolder  DppPolHolder for Ingress direction    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ rtdmc:IPV6McastIfDefCont  Interface Policy Container    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ pim:IfDef PIM interface definition.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ pim:JPInbFilterDef Interface-level inbound join/prune filter definition.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ pim:JPOutbFilterDef Interface-level outbound join/prune filter definition.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ pim:NbrFilterDef Interface-level neighbor filter definition.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ pim:RsIfDefToPim6If       ├ pim:RsIfDefToPimIf Relationship to the PIM interfaces  ├ rtdmc:McastIfDefCont  Interface Policy Container    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ igmp:IfDef       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ igmp:RepDef         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ igmp:RsIfDefToIgmpIf  Relationship to the IGMP interfaces      ├ igmp:StRepDef         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ igmp:StateLDef         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag     ├ pim:IfDef PIM interface definition.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ pim:JPInbFilterDef Interface-level inbound join/prune filter definition.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ pim:JPOutbFilterDef Interface-level outbound join/prune filter definition.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ pim:NbrFilterDef Interface-level neighbor filter definition.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:RouteMapDef PIM route map definition          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RouteMapEntryDef PIM route map entry definition            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtdmc:RtFilterToRtMapPol         ├ rtdmc:RsFilterToRtMapPol The RouteMap policy.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag       ├ pim:RsIfDefToPim6If       ├ pim:RsIfDefToPimIf Relationship to the PIM interfaces