Properties Summary |
Defined in: ospf:LsSentStats |
scalar:Uint32
|
lsAckPktsSentAvg (ospf:LsSentStats:lsAckPktsSentAvg)
LSACK Packets Sent. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsAckPktsSentBase (ospf:LsSentStats:lsAckPktsSentBase)
LSACK Packets Sent. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint32
|
lsAckPktsSentCum (ospf:LsSentStats:lsAckPktsSentCum)
LSACK Packets Sent. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint32
|
lsAckPktsSentLast (ospf:LsSentStats:lsAckPktsSentLast)
LSACK Packets Sent. This is the most current value read by the counter.
|
scalar:Uint32
|
lsAckPktsSentMax (ospf:LsSentStats:lsAckPktsSentMax)
LSACK Packets Sent. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsAckPktsSentMin (ospf:LsSentStats:lsAckPktsSentMin)
LSACK Packets Sent. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsAckPktsSentPer (ospf:LsSentStats:lsAckPktsSentPer)
LSACK Packets Sent. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
lsAckPktsSentRate (ospf:LsSentStats:lsAckPktsSentRate)
LSACK Packets Sent. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
lsAckPktsSentSpct (ospf:LsSentStats:lsAckPktsSentSpct)
LSACK Packets Sent. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
lsAckPktsSentThr (ospf:LsSentStats:lsAckPktsSentThr)
LSACK Packets Sent. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint32
|
lsAckPktsSentTr (ospf:LsSentStats:lsAckPktsSentTr)
LSACK Packets Sent. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsAckPktsSentTrBase (ospf:LsSentStats:lsAckPktsSentTrBase)
LSACK Packets Sent. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Uint32
|
lsReqPktsSentAvg (ospf:LsSentStats:lsReqPktsSentAvg)
LSREQ Packets Sent. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsReqPktsSentBase (ospf:LsSentStats:lsReqPktsSentBase)
LSREQ Packets Sent. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint32
|
lsReqPktsSentCum (ospf:LsSentStats:lsReqPktsSentCum)
LSREQ Packets Sent. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint32
|
lsReqPktsSentLast (ospf:LsSentStats:lsReqPktsSentLast)
LSREQ Packets Sent. This is the most current value read by the counter.
|
scalar:Uint32
|
lsReqPktsSentMax (ospf:LsSentStats:lsReqPktsSentMax)
LSREQ Packets Sent. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsReqPktsSentMin (ospf:LsSentStats:lsReqPktsSentMin)
LSREQ Packets Sent. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsReqPktsSentPer (ospf:LsSentStats:lsReqPktsSentPer)
LSREQ Packets Sent. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
lsReqPktsSentRate (ospf:LsSentStats:lsReqPktsSentRate)
LSREQ Packets Sent. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
lsReqPktsSentSpct (ospf:LsSentStats:lsReqPktsSentSpct)
LSREQ Packets Sent. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
lsReqPktsSentThr (ospf:LsSentStats:lsReqPktsSentThr)
LSREQ Packets Sent. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint32
|
lsReqPktsSentTr (ospf:LsSentStats:lsReqPktsSentTr)
LSREQ Packets Sent. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsReqPktsSentTrBase (ospf:LsSentStats:lsReqPktsSentTrBase)
LSREQ Packets Sent. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Uint32
|
lsUpdPktsSentAvg (ospf:LsSentStats:lsUpdPktsSentAvg)
LSU Packets Sent. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsUpdPktsSentBase (ospf:LsSentStats:lsUpdPktsSentBase)
LSU Packets Sent. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint32
|
lsUpdPktsSentCum (ospf:LsSentStats:lsUpdPktsSentCum)
LSU Packets Sent. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint32
|
lsUpdPktsSentLast (ospf:LsSentStats:lsUpdPktsSentLast)
LSU Packets Sent. This is the most current value read by the counter.
|
scalar:Uint32
|
lsUpdPktsSentMax (ospf:LsSentStats:lsUpdPktsSentMax)
LSU Packets Sent. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsUpdPktsSentMin (ospf:LsSentStats:lsUpdPktsSentMin)
LSU Packets Sent. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsUpdPktsSentPer (ospf:LsSentStats:lsUpdPktsSentPer)
LSU Packets Sent. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
lsUpdPktsSentRate (ospf:LsSentStats:lsUpdPktsSentRate)
LSU Packets Sent. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
lsUpdPktsSentSpct (ospf:LsSentStats:lsUpdPktsSentSpct)
LSU Packets Sent. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
lsUpdPktsSentThr (ospf:LsSentStats:lsUpdPktsSentThr)
LSU Packets Sent. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint32
|
lsUpdPktsSentTr (ospf:LsSentStats:lsUpdPktsSentTr)
LSU Packets Sent. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint32
|
lsUpdPktsSentTrBase (ospf:LsSentStats:lsUpdPktsSentTrBase)
LSU Packets Sent. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
cnt
Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The number of readings made within the current sample.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
lastCollOffset
Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
lsAckPktsSentAvg
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
LSACK Packets Sent. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsAckPktsSentBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
LSACK Packets Sent. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
lsAckPktsSentCum
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
LSACK Packets Sent. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
lsAckPktsSentLast
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
LSACK Packets Sent. This is the most current value read by the counter.
lsAckPktsSentMax
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
LSACK Packets Sent. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
lsAckPktsSentMin
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
LSACK Packets Sent. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
lsAckPktsSentPer
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
LSACK Packets Sent. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsAckPktsSentRate
Type: scalar:Double
Units: packets
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
LSACK Packets Sent. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsAckPktsSentSpct
Type: scalar:Uint16
Units: packets
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
LSACK Packets Sent. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsAckPktsSentThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
LSACK Packets Sent. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
lsAckPktsSentTr
Type: scalar:Sint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
LSACK Packets Sent. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
lsAckPktsSentTrBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
LSACK Packets Sent. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
lsReqPktsSentAvg
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
LSREQ Packets Sent. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsReqPktsSentBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
LSREQ Packets Sent. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
lsReqPktsSentCum
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
LSREQ Packets Sent. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
lsReqPktsSentLast
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
LSREQ Packets Sent. This is the most current value read by the counter.
lsReqPktsSentMax
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
LSREQ Packets Sent. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
lsReqPktsSentMin
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
LSREQ Packets Sent. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
lsReqPktsSentPer
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
LSREQ Packets Sent. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsReqPktsSentRate
Type: scalar:Double
Units: packets
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
LSREQ Packets Sent. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsReqPktsSentSpct
Type: scalar:Uint16
Units: packets
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
LSREQ Packets Sent. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsReqPktsSentThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
LSREQ Packets Sent. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
lsReqPktsSentTr
Type: scalar:Sint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
LSREQ Packets Sent. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
lsReqPktsSentTrBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
LSREQ Packets Sent. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
lsUpdPktsSentAvg
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
LSU Packets Sent. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsUpdPktsSentBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
LSU Packets Sent. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
lsUpdPktsSentCum
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
LSU Packets Sent. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
lsUpdPktsSentLast
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
LSU Packets Sent. This is the most current value read by the counter.
lsUpdPktsSentMax
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
LSU Packets Sent. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
lsUpdPktsSentMin
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
LSU Packets Sent. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
lsUpdPktsSentPer
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
LSU Packets Sent. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsUpdPktsSentRate
Type: scalar:Double
Units: packets
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
LSU Packets Sent. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsUpdPktsSentSpct
Type: scalar:Uint16
Units: packets
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
LSU Packets Sent. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
lsUpdPktsSentThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
LSU Packets Sent. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
lsUpdPktsSentTr
Type: scalar:Sint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
LSU Packets Sent. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
lsUpdPktsSentTrBase
Type: scalar:Uint32
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
LSU Packets Sent. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
modTs
Type: mo:TStamp
Primitive Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The time when this object was last modified.
| |
Constants |
never |
0ull |
never |
NO COMMENTS
|
DEFAULT |
never(0ull) |
never |
NO COMMENTS
|
|
repIntvEnd
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
repIntvStart
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|