Class top:System (CONCRETE)

Class ID:3
Class Label: System
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Concrete Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [aaa, access-connectivity, access-equipment, access-protocol, access-qos, admin, fabric-connectivity, fabric-equipment, fabric-protocol, nw-svc-policy, ops, tenant-connectivity, tenant-epg, tenant-ext-connectivity, tenant-ext-protocol, tenant-network-profile, tenant-protocol, tenant-qos, tenant-security, vmm-policy]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: Fabric
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Explicit
Monitoring Flags : [ IsObservable: true, HasStats: true, HasFaults: true, HasHealth: true, HasEventRules: true ]

RN FORMAT: sys

    [1] PREFIX=sys


DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys

[1] sys

                

Diagram

Super Mo: naming:NamedObject, Container Mos: fabric:Node (deletable:no), top:Root (deletable:no), Contained Mos: aaa:CtrlrFipsState, aaa:FipsState, ac:Entity, acl:Entity, aclcap:Prov, action:LCont, actrl:Entity, actrlcap:Prov, aentp:Entity, aib:Entity, analytics:Entity, analytics:HwTelemetry, arp:Entity, bd:EnforceExpCont, bfd:Entity, bgp:Entity, cap:Cat, cdp:Entity, cert:Entity, cloud:Controller, cloudsec:Entity, cnw:AggrIf, cnw:PhysIf, comm:RLTepInfo, comm:SshInst, comm:TelnetInst, compat:SuppFw, configprofile:Catalog, coop:Entity, copp:Entity, cpinfra:Entity, datetime:ClkPol, datetime:Ntpq, dhcp:Entity, dns:Entity, dot1x:Entity, dot1x:Nic, dpp:Entity, eigrp:Entity, eqpt:Ch, eqpt:Entity, eqpt:ExtCh, eqpt:FeatureEx, eqpt:ReloadSwitch, eqptcapacity:Entity, eqptdiag:Entity, ethpm:Entity, fabrgm:Entity, fabric:Decommission, fabric:LeafNodeRole, fabric:MMUpgrader, fabric:RemoteLeafNodeRole, fabric:SpineNodeRole, fabric:SystemInfo, fc:Entity, fcoe:Entity, fcpm:Entity, fhs:Entity, firmware:CatFwStatusCont, firmware:CtrlrFwStatusCont, firmware:FwStatusCont, fv:EpNs, fv:ImplicitStaleEpCont, fv:StaleTunEpCont, glean:Entity, hsrp:Entity, icmpv4:Entity, icmpv6:Entity, igmp:Entity, igmpsnoop:Entity, im:Entity, infrasec:Entity, ipagectrl:Entity, ipsec:Entity, ipv4:Entity, ipv6:Entity, isis:Entity, l1:PhysIf, l1cap:Prov, l2:BrIf, l2:ExtIf, l2:InbandIf, l2cap:Prov, l3:Ctx, l3:CtxSubstitute, l3:Inst, l3cap:Prov, l3vm:Entity, lacp:Entity, leqpt:LooseNode, license:Entity, lldp:Entity, macsec:Entity, mcp:Entity, mgmt:MgmtIf, mld:Entity, mldsnoop:Entity, mock:MockRoot, monitor:Entity, mp:Localfabric, mp:Site, mpls:Entity, mrib:Entity, multidomain:InternalCtxInfo, multidomain:MultiDomainIps, multidomain:MultiDomainVnids, nat:Entity, nd:Entity, npv:Entity, nw:ConnGrp, nw:Vdc, opflex:ODevCmdReq, opflex:ODevCmdResp, opflex:ODevRefCont, opflex:OeHupTrigger, opflex:PodInfo, opflex:VtepRefCont, opflexp:HupTrigger, opflexp:PolicyResolveReq, opflexp:Reference, opflexp:ReportedEpReg, opflexp:ReportedRouteReg, ospf:Entity, ospfv3:Entity, pc:AggrIf, pc:Entity, pc:FcEntity, pim6:Entity, pim:Capability, pim:Entity, pki:FabricSelfCACertsModified, platformmgr:PlmgrTrig, poe:Entity, poe:Nic, proc:Container, proc:Entity, proc:System, ptp:Entity, qosm:Entity, radius:Entity, regress:If, rlpodred:RlPodRedPolicy, rlpodred:RlSwitchoverPod, rpm:Entity, rpm:Mmode, satm:Entity, segrt:Entity, sla:Entity, slowdrain:Entity, smm:Entity, snmp:Entity, span:Acct, span:Entity, span:RetryCont, statspref:Cont, stp:Entity, sts:Entity, svccopy:Entity, svcredir:Entity, synthetic:SwTLTestObj, sysdebug:CoreFileRepository, sysdebug:Ep, sysdebug:TechSupFileRepository, syslog:Acct, sysmgr:Entity, telemetry:CapabilityCont, telemetry:Entity, telemetry:Inst, topoctrl:Entity, track:Entity, tunnel:If, twamp:Entity, udld:Entity, unifiedports:Entity, uribv4:Entity, uribv6:Entity, usrcallhome:Record, usrsyslog:Record, veth:Entity, vlanmgr:Entity, vpc:Entity, vsanmgr:Entity, wwn:Entity, Relations From: netflow:AExporterPol, maint:MaintPOnD, traceroutep:TrNode, dbgexp:TechSupOnDBase, Relations To: mon:Pol, compat:Fw, bfd:Ipv4InstPol, bfd:Ipv6InstPol, cdp:InstPol, edr:ErrDisRecoverPol, topoctrl:FastLinkFailoverInstPol, fc:FabricPol, fc:InstPol, equipment:FlashConfigPol, topoctrl:FwdScaleProfilePol, iacl:AProfile, l2:NodeAuthPol, lldp:InstPol, mcp:InstPol, stp:InstPol, netflow:NodePol, poe:InstPol, psu:InstPol, geo:Rack, Relations: top:RsMonPolSystemPolCons, top:RsNeighFw, top:RsProtGFw, top:RsSysBfdIpv4PolCons, top:RsSysBfdIpv6PolCons, top:RsSysCdpInstPolCons, top:RsSysErrDisRecoverPolCons, top:RsSysFastLinkFailoverInstPolCons, top:RsSysFcFabricPolCons, top:RsSysFcInstPolCons, top:RsSysFlashConfigPolCons, top:RsSysFwdScaleProfPolCons, top:RsSysIaclProfilePolCons, top:RsSysL2NodePolAuthCons, top:RsSysLldpInstPolCons, top:RsSysMcpInstPolCons, top:RsSysMstInstPolCons, top:RsSysNetflowNodePolCons, top:RsSysPoeInstPolCons, top:RsSysPsuInstPolCons, top:RsSystemRack, top:RtExporterToTopSystem, top:RtFwinstlsrc, top:RtTrDst, top:RtTrSrc, top:RtTsSrc,

Containers Hierarchies

top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc... top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...

Contained Hierarchy

top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...  ├ aaa:CtrlrFipsState     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ aaa:FipsState     ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ ac:Entity Holds entity information for the atomic counters control plane.    ├ ac:LatencyInst  Global Latency Measurement Mode for Tunnel Endpoints      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ ac:LatencyHistIntvl  Configure Latency histogram parameters for all h/w tables        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag     ├ ac:LatencyPtpModeDef  latency ptp mode knob      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ ac:RuleArp Represents an ARP-based rule for the atomic counters.      ├ ac:Bank Represents an atomic counter bank. Each atomic counter rule has two sets of banks to count packets and bytes.        ├ ac:EgrHit Represents the number of egress hits        ├ ac:IngrHit Represents the number of ingress hits.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ ac:RuleIp Specifies the IP entry.      ├ ac:Bank Represents an atomic counter bank. Each atomic counter rule has two sets of banks to count packets and bytes.        ├ ac:EgrHit Represents the number of egress hits        ├ ac:IngrHit Represents the number of ingress hits.      ├ ac:LatencyAvg Average Latency Data.      ├ ac:LatencyHist  MO containing histogram data for latency      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ ac:RuleMac Represents media access control (MAC) address-based rules for the atomic counters.      ├ ac:Bank Represents an atomic counter bank. Each atomic counter rule has two sets of banks to count packets and bytes.        ├ ac:EgrHit Represents the number of egress hits        ├ ac:IngrHit Represents the number of ingress hits.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ acl:Entity  Holds ACL control plane configuration    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ acl:Inst  Holds service instance information      ├ acl:ACEHolder     ├ ipv4acl:AF  IPv4      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ ipv4acl:ACL  IPv4 ACL        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ipv4acl:ACE  IPv4 ACE          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ tag:Annotation       ├ tag:Tag     ├ ipv6acl:AF  IPv6      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ ipv6acl:ACL  IPv6 ACL        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ipv6acl:ACE  IPv6 ACE          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ tag:Annotation       ├ tag:Tag     ├ tag:Annotation     ├ tag:Tag   ├ aclcap:Prov   ├ action:LCont The local container.    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ action:LSubj The local subject.      ├ aaa:DomainRef A reference to the domain that the parent object belongs to.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ aaa:RtDomainRef The target relation to resolve an RBAC domain.        ├ aaa:RtLSubjToDomainRef         ├ aaa:RtScriptHandlerStateToDomainRef A target relation to a reference to the domain that the parent object belongs.        ├ aaa:RtSessionToDomainRef         ├ aaa:RtTenantToDomainRef         ├ aaa:RtVDevDomainRefContToDomainRef         ├ aaa:RtVDevToDomainRef A target relation to a reference to the domain that the parent object belongs.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ aaa:IDomainRef This object is generated and used only by internal processes.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ action:LInst The local instance.      ├ action:RsLSubjToDomainRef         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ imginstall:Rslt The executed results.      ├ ping:ExecFab The execution for fabric ping.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ oam:RsSrcEncap A source relation to an 802.1q VLAN. This object indicates the VLAN an endpoint belongs to.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ oam:RsSrcToL3OutAtt  Relation to the L3 out          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ ping:ExecTn The execution for endpoint to endpoint (Tenant) ping.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ oam:RsSrcEncap A source relation to an 802.1q VLAN. This object indicates the VLAN an endpoint belongs to.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ oam:RsSrcToL3OutAtt  Relation to the L3 out          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ ping:RsltFab The result for a fabric ping.      ├ ping:RsltTn       ├ tag:Annotation       ├ tag:Tag       ├ traceroute:ExecFab An execution for a fabric (node to node) traceroute.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ oam:RsSrcEncap A source relation to an 802.1q VLAN. This object indicates the VLAN an endpoint belongs to.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ oam:RsSrcToL3OutAtt  Relation to the L3 out          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ traceroute:ExecTn An execution for an endpoint to endpoint (tenant) traceroute.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ oam:RsSrcEncap A source relation to an 802.1q VLAN. This object indicates the VLAN an endpoint belongs to.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ oam:RsSrcToL3OutAtt  Relation to the L3 out          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ traceroute:RsltFab The result for fabric traceroute.        ├ traceroute:PathGrp A path group. Each path group captures all paths taken by the traceroute to the final destination.          ├ traceroute:Path A path. Each path represents a sequence of nodes towards the destination.            ├ traceroute:Node A node in the traceroute path. Each node is identified by the IP address and the order represents its placement in the path.            ├ traceroute:ProbeInfo  ProbeInfo for each Path              ├ traceroute:Probe  Probe for each Path      ├ traceroute:RsltTn The result for an endpoint to endpoint (tenant) traceroute.        ├ traceroute:PathGrp A path group. Each path group captures all paths taken by the traceroute to the final destination.          ├ traceroute:Path A path. Each path represents a sequence of nodes towards the destination.            ├ traceroute:Node A node in the traceroute path. Each node is identified by the IP address and the order represents its placement in the path.            ├ traceroute:ProbeInfo  ProbeInfo for each Path              ├ traceroute:Probe  Probe for each Path    ├ eqptdiag:OnDRule       ├ eqptdiag:OnDSubj         ├ eqptdiag:Rslt         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ tag:Annotation     ├ tag:Tag   ├ actrl:Entity The ACTRL control plane entity information.    ├ actrl:AuxSt The auxiliary state of the process, used for internal information.      ├ actrl:AuxFlt The filter auxiliary information.        ├ actrl:AuxEntry FilterEntry auxiliary information.      ├ actrl:AuxRule The auxiliary rule information.        ├ actrl:RtAuxRule A target relation to the auxiliary rule information.      ├ actrl:AuxScope The auxiliary scope.      ├ actrl:MgmtAuxFlt The filter auxiliary information.      ├ actrl:MgmtAuxRule The management rule auxiliary information.    ├ actrl:Bootstrap  Holds actrl bootstrap information    ├ actrl:Flt The filter rules identifying a group of filter entries.      ├ actrl:Entry The filter entry in the system, which is a unique set of classification filters identified by l4 parameters.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ actrl:RsRfltpConn       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ vz:RsFiltGraphAtt A source relation to an input terminal node. For abstract graphs, this is the terminal node at the input end. Note that this relation is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ vz:RtConnToFlt A target relation to an abstraction of a filter object, which can be a filter, folder of filters , or a collection of filters. Note that this relation is an internal object.      ├ vz:RtConnToFltInst A target relation to an abstraction of a filter object, which can be a filter, folder of filters , or a collection of filters. Note that this relation is an internal object.      ├ vz:RtFwdRFltPAtt A target relation to a forward remote filter profile.      ├ vz:RtRFltAtt A target relation to a resolved filter profile.      ├ vz:RtRevRFltPAtt The reverse a resolved filter profile.      ├ vz:RtTabooRFltAtt A target relation to a taboo resolved filter profile.      ├ vz:RtToRFltP       ├ vz:RtToRemoteRFltAtt A target relation to remote resolved filter profile.      ├ vz:RtToRemoteRFltP     ├ actrl:Inst The ACTRL instance information.    ├ actrl:Scope The scope of the zoning rules.      ├ actrl:MgmtRule The zoning rules for management endpoint groups.        ├ actrl:RsAuxRule         ├ actrl:RsToCopyDestGrp  Relationship to the copy service object        ├ actrl:RsToEpgConn         ├ actrl:RsToEpgProt         ├ actrl:RsToRedirDestGrp  Relationship to the service object for pbr redirection        ├ actrl:RsToStsVNode         ├ actrl:RsToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ vz:ObservableRuleOwner           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ vz:RuleOwner           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ vz:TrCreatedBy  Tracks the resource that created a Taboo rule.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ actrl:RsTenConn       ├ actrl:Rule The zoning rules for tenant endpoint groups.        ├ actrl:RsAuxRule         ├ actrl:RsToCopyDestGrp  Relationship to the copy service object        ├ actrl:RsToEpgConn         ├ actrl:RsToEpgProt         ├ actrl:RsToRedirDestGrp  Relationship to the service object for pbr redirection        ├ actrl:RsToStsVNode         ├ actrl:RsToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ vz:ObservableRuleOwner           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ vz:RuleOwner           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ vz:TrCreatedBy  Tracks the resource that created a Taboo rule.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ actrl:SnmpRule The zoning rules for SNMP endpoint groups.        ├ actrl:RsAuxRule         ├ actrl:RsToCopyDestGrp  Relationship to the copy service object        ├ actrl:RsToEpgConn         ├ actrl:RsToEpgProt         ├ actrl:RsToRedirDestGrp  Relationship to the service object for pbr redirection        ├ actrl:RsToStsVNode         ├ actrl:RsToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ vz:ObservableRuleOwner           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ vz:RuleOwner           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ vz:TrCreatedBy  Tracks the resource that created a Taboo rule.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ actrl:Stats  Debug statistics    ├ actrl:StatsReport       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ actrlcap:Prov The provider.  ├ aentp:Entity  Holds aentp control plane entity information.    ├ aentp:Coop  This object holds Merkle Root, Overflow Merkle Root and overflow bit indexes for COOP      ├ aentp:Table  Table for Coop        ├ aentp:Bucket  Bucket defintion.          ├ aentp:RsHBucket2EpRec  List of EP record collided onto this bucket          ├ aentp:RsHBucket2IpOnlyRec  List of IP only record collided onto this bucket    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ aib:Entity This is a top-level placeholder for the Adjacency Information Base (AIB) attributes, if any.    ├ aib:Dom The Virtual Routing and Forwarding (VRF).      ├ aib:Db A placeholder for all the IP adjacencies.        ├ aib:Adj An adjacency database record in the Adjacency Information Base (AIB).          ├ aib:AdjOwner A client in the system that has added the adjacency to the Adjacency Information Base (AIB).        ├ aib:If           ├ aib:IfAdj  Adjacency database record            ├ aib:IfAdjOwner  Aadjacency ownership record    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ analytics:Entity     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ analytics:Inst  Holds netflow and analytics instance information      ├ analytics:BDTarget  Bridge Domain target        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:RsMonitorAtt  Reference to monitor          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ analytics:Capability  Platform capability informations      ├ analytics:Collector  Flow Collector        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:RtCollectorAtt  Relation to collector        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ analytics:Controller  Controller information for bootstrapping the analytics agent        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ analytics:FwdInstTarget  Forwarding instance based target        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:RsMonitorAtt  Reference to monitor          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RsPolicyAtt  Reference to policy          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RsProfAtt  Reference to profile          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ analytics:Monitor  Flow Monitor        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:CollectorBucket  Collector bucket info          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ analytics:RsCollectorAtt  Relation to collector            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:Annotation             ├ tag:Tag           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RsRecordPAtt  Relation to record          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RsRecordSsxAtt  Relation to record          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RtMonitorAtt  Reference to monitor        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ analytics:PhysIfTarget  Physical interface target        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:RsMonitorAtt  Reference to monitor          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ analytics:Policy  Policy Container for ACLs        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:MatchAcl  Match ACL          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RtPolicyAtt  Reference to policy        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ analytics:Profile  Analytics profile        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:PayloadLenBin  Payload length bin          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RcvWindowSzBin  Receive window size bin          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ analytics:RtProfAtt  Reference to profile        ├ analytics:TCPOptHdrLenBin  TCP options header length bin          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ analytics:RecordP  Flow Record        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:RtRecordPAtt  Relation to record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ analytics:RecordSsx SSX Record        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ analytics:RtRecordSsxAtt  Relation to record        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ analytics:Sampler  Sampler        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ analytics:Slot  Slot info        ├ analytics:Oclass  Oclass info      ├ analytics:Statistics  MO containing statistics for analytics      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ tag:Annotation     ├ tag:Tag   ├ analytics:HwTelemetry     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fte:Fte       ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fte:Inst  Holds FTE instance information        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fte:Collector  FTE Collector info          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fte:RtCollectorAtt Relation to Collector          ├ tag:Annotation           ├ tag:Tag         ├ fte:Events  FTE Events          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fte:RtEventsAtt  Relation to events          ├ tag:Annotation           ├ tag:Tag         ├ fte:Monitor  FTE Monitor one monitor can be attached to n records          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fte:RsCollectorAtt Relation to Collector            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:Annotation             ├ tag:Tag           ├ fte:RsEventsAtt  Relation to events            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:Annotation             ├ tag:Tag           ├ fte:RsRecordAtt  Relation to record            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:Annotation             ├ tag:Tag           ├ fte:RtMonitorAtt  Reference to monitor          ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ fte:Record  FTE Record          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fte:RtRecordAtt  Relation to record          ├ tag:Annotation           ├ tag:Tag         ├ fte:SysFte  System FTE          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fte:RsMonitorAtt  Reference to monitor            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ tag:Annotation     ├ tag:Tag   ├ arp:Entity Represents ARP control plane entity information.    ├ arp:Inst Represents per-ARP instance information. In the current implementation, only one instance of ARP is running in the system.      ├ arp:Dom Represents ARP domain (VRF) information.        ├ arp:BD  This object holds arp information that is operated at a interface level          ├ arp:CktEp  This object holds arp information that is operated at a cktep level            ├ arp:SvcAdjEp  Service arp adjacency definitions              ├ arp:Sla  This object will take the Dn of slaOperation Mo for counting the references of IPSLA using same IP address              ├ svcredir:EpPRedirPolCons  EpPRedirPol Consumer, represents the EpPRedirPol which uses the destmon          ├ arp:SvcAdjEp  Service arp adjacency definitions            ├ arp:Sla  This object will take the Dn of slaOperation Mo for counting the references of IPSLA using same IP address            ├ svcredir:EpPRedirPolCons  EpPRedirPol Consumer, represents the EpPRedirPol which uses the destmon        ├ arp:Db The ARP database. This contains all information owned by the ARP process, such as dynamic adjacency and arp statistics.          ├ arp:AdjEp The adjacency endpoint. This is the endpoint object that contains information regarding dynamically learned endpoints.        ├ arp:DomStatsAdj An object that holds the ARP domain related adjacency statistics.        ├ arp:DomStatsMisc An object that holds the ARP domain related miscellaneous statistics.        ├ arp:DomStatsRx An object that holds the ARP domain received statistics.        ├ arp:DomStatsTx An object that holds the ARP domain transmitted statistics.        ├ arp:If The ARP Interface. This is configured to contain ARP specific interface information and contains statically configured adjacency endpoint(s).          ├ arp:IfStatsAdj An object that holds the ARP interface related adjacency statistics.          ├ arp:IfStatsMisc An object that holds the ARP interface related miscellaneous statistics.          ├ arp:IfStatsRx An object that holds the ARP interface related received statistics.          ├ arp:IfStatsTx An object that holds the ARP interface related transmitted statistics.          ├ arp:StAdjEp The ARP static adjacency endpoint, which is the endpoint object that contains information regarding statically configured endpoints. This is a statically configured endpoint corresponding to an interface.            ├ arp:RtCtrlrAdjEpToStAdjEp A target relation to the ARP static adjacency endpoint.            ├ arp:RtEpDefRefToStAdjEp A target relation to the ARP static adjacency endpoint.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ nw:RtPathToIf A target relation to the interface information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ bd:EnforceExpCont     ├ bd:EnforceExpIp       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ bfd:Entity  Holds bfd control plane entity information    ├ bfd:Inst  This objects hold per bfd instance information.      ├ bfd:If  This object holds bfd interface information        ├ bfd:IfAf  This object holds per address family bfd interface information          ├ bfd:AuthP  This object holds authentication policy information            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ bfd:KaP  This object holds keepalive policy information            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ bfd:MhIfAf  This object holds per address family bfd interface information          ├ bfd:MhAuthP             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ bfd:MhKaP  This object holds keepalive policy information            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ nw:RtPathToIf A target relation to the interface information.      ├ bfd:InstAf  This objects hold per address family bfd instance information        ├ bfd:KaP  This object holds keepalive policy information          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ bfd:MhKaP  This object holds keepalive policy information          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ bfd:InstHaCtx       ├ bfd:Sess  This object holds bfd session information        ├ bfd:PeerV  This object holds bfd last packet information. This signifies peer view of the session.        ├ bfd:RsMbrSess  Relation to port-channel member sessions        ├ bfd:RtMbrSess  Relation to port-channel member sessions        ├ bfd:SessApp  This object holds app information per bfd session        ├ bfd:SessStats  This object holds bfd session stats information          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ bgp:Entity The BGP control plane entity information.    ├ bgp:Inst The per BGP instance information. There is only instance supported in BGP.      ├ bgp:Dom The object that represents all the BGP domain (VRF) information.        ├ bgp:BDEvi  This object holds Bridge Domain Ethernet VPN instance information          ├ bgp:CktEpEvi  This object holds Circuit Endpoint (EPG) Ethernet VPN instance information            ├ bgp:RttP The route target policy.              ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.                ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.              ├ bgp:RttEntry A list of route targets.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:EVpnImetRoute  This object holds the bgp evpn imet route information          ├ bgp:EVpnMacIpRoute  This object holds the bgp evpn mac-ip route information          ├ bgp:EVpnPfxRoute  This object holds the bgp evpn ip prefix route information          ├ bgp:RttP The route target policy.            ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:RttEntry A list of route targets.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ bgp:Db  BGP databases          ├ bgp:DTEp  Tunnel endpoints discovered through bgp        ├ bgp:DomAf The BGP (VRF) address family information.          ├ bgp:AddlPath  BGP Additional Paths feature allows the advertisement of multiple paths through the same peering session for the same prefix without the new paths implicitly replacing any previous paths          ├ bgp:AdminDist The administrative distance is used by routers to select the best path when there are two or more different routes to the same destination from two different routing protocols.          ├ bgp:DampeningCtrl  Route dampening parameters          ├ bgp:DefRtLeakP The default route leak policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:HostLeakP  COOP/L2RIB to BGP host route leak policy. This defines policy to control the distribution of host routes from COOP/L2RIB to BGP            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:InterLeakP A policy that defines distribution of routes from one protocol to another protocol.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:NextHop The BGP route information for the next hop.            ├ bgp:AttNextHop The attached next hop.          ├ bgp:PfxLeakP  This objects holds route leak policy for a given network            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.              ├ ip:RsConsRoot           ├ bgp:RibLeakP           ├ bgp:Route The BGP route table for a particular address family (IPv4 unicast and IPv6 unicast), which contains all the routes advertised by peers and also redistributed into BGP from other routing protocols. This route table is per tenant context (per VRF).            ├ bgp:Path The BGP AS path.              ├ bgp:AsSeg The BGP path AS segment information.                ├ bgp:AsItem The Autonomous System segment items.              ├ bgp:ExtComm An extended community.              ├ bgp:RegComm The regular community.          ├ bgp:RtExpP  Route export policy to control whether to export routes into a different address family. Destination address family is specified in the object. Object may be nested within peer Address family (AF) to subject only those peer's particular AF routes to export. Object can also be under a domain Address family in which case it is applicable to all pe...            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:RtSum  Route Summarization            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:RttP The route target policy.            ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:RttEntry A list of route targets.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:VpnCtrlP  This object holds policy to control vpn af information for a given vrf            ├ bgp:PfxLeakCtrlP  This object holds route control policy for all networks defined by PfxLeakP in that domain              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:PfxLeakP  This objects holds route leak policy for a given network              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.              ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.                ├ ip:RsConsRoot             ├ bgp:RtP  Route policy holds all route targets and route controls              ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.                ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.              ├ bgp:RttEntry A list of route targets.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:VpnRoute The BGP route table for a VPN address family (VPNv4 unicast and VPNv6 unicast). The VPN address family routes are exchanged within the fabric over MP-BGP sessions between spines and leafs. Routes are advertised from border leafs to non-border leafs with spines acting as route reflectors.            ├ bgp:Path The BGP AS path.              ├ bgp:AsSeg The BGP path AS segment information.                ├ bgp:AsItem The Autonomous System segment items.              ├ bgp:ExtComm An extended community.              ├ bgp:RegComm The regular community.        ├ bgp:DomEvi  This object holds Domain Ethernet VPN instance information          ├ bgp:RttP The route target policy.            ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:RttEntry A list of route targets.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ bgp:Gr The per-domain graceful restart information.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ bgp:PathCtrl  This object holds global BGP bestpath knobs at Dom level        ├ bgp:Peer The BGP information pertaining to a peer.          ├ bgp:LocalAsn The local autonomous system (AS) information pertaining to a peer.          ├ bgp:PeerAf The BGP peer information for a BGP peer address family. Each address family maintains a separate BGP database, which allows you to configure BGP policy on per-address family basis.            ├ bgp:DefRtLeakP The default route leak policy.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:MaxPfxP The maximum prefix policy specifies the action to be taken when the number of prefixes advertised by the peer crosses a specified maximum limit. This policy is used as a defensive mechanism to protect resources on the router.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:RtCtrlP The route control policy for routes coming/going to peers. There are few ways to apply this policy.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:RtExpP  Route export policy to control whether to export routes into a different address family. Destination address family is specified in the object. Object may be nested within peer Address family (AF) to subject only those peer's particular AF routes to export. Object can also be under a domain Address family in which case it is applicable to all pe...              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:PeerEntry The BGP peer status specifies the status of a relationship between BGP speakers. A BGP speaker does not discover another BGP speaker automatically. You must configure the relationships between BGP speakers. A BGP peer is a BGP speaker that has an active TCP connection to another BGP speaker.            ├ bgp:GrSt The per-neighbor graceful restart operational information.            ├ bgp:PeerAfEntry The operational status information for a BGP peer address family. Each address family maintains a separate BGP database, which allows you to configure BGP policy on per-address family basis.              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)            ├ bgp:PeerEntryStats The BGP peer statistics operational information.              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)            ├ bgp:PeerEvents Peer event information.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ bgp:PeerFallOver  This object holds fallover information          ├ bgp:PeerIntervals  This object holds configured peer timers information          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ bgp:EncapGroupEvi  This object holds EncapGroup Ethernet VPN instance information which carries routes for a Group of Encaps        ├ bgp:RtP  Route policy holds all route targets and route controls          ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:RttEntry A list of route targets.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ bgp:RttP The route target policy.          ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ bgp:RttEntry A list of route targets.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ bgp:Vni  This object holds VNI information for multi-site routes          ├ bgp:RtP  Route policy holds all route targets and route controls            ├ bgp:RtCtrlMapP  Route control map policy for routes imported/exported into an AF. Control is through route maps.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ bgp:RttEntry A list of route targets.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ cap:Cat Represents a capability catalog.    ├ cap:Rule Represents a capability or capacity provider rule. Every Rule has a subject that represents the entity which consumes the capability. Namespaces that have concrete rules define the subject property and its types.    ├ eqptcap:Card The card capability provider.      ├ cap:Rule Represents a capability or capacity provider rule. Every Rule has a subject that represents the entity which consumes the capability. Namespaces that have concrete rules define the subject property and its types.      ├ eqptcap:MfgDef The manufacturing-related properties such as PID and SKU.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqptcap:PhysicalDef Physical properties such as maximum temperature and removal conditions.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ eqptcap:Fan The fan capability provider.      ├ cap:Rule Represents a capability or capacity provider rule. Every Rule has a subject that represents the entity which consumes the capability. Namespaces that have concrete rules define the subject property and its types.      ├ eqptcap:MfgDef The manufacturing-related properties such as PID and SKU.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqptcap:PhysicalDef Physical properties such as maximum temperature and removal conditions.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ eqptcap:Port The port capability provider.      ├ cap:Rule Represents a capability or capacity provider rule. Every Rule has a subject that represents the entity which consumes the capability. Namespaces that have concrete rules define the subject property and its types.      ├ eqptcap:MfgDef The manufacturing-related properties such as PID and SKU.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqptcap:PhysicalDef Physical properties such as maximum temperature and removal conditions.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ eqptcap:Psu The power supply unit (PSU) capability provider.      ├ cap:Rule Represents a capability or capacity provider rule. Every Rule has a subject that represents the entity which consumes the capability. Namespaces that have concrete rules define the subject property and its types.      ├ eqptcap:MfgDef The manufacturing-related properties such as PID and SKU.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqptcap:PhysicalDef Physical properties such as maximum temperature and removal conditions.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ eqptcap:Sfp The SFP capability provider.      ├ cap:Rule Represents a capability or capacity provider rule. Every Rule has a subject that represents the entity which consumes the capability. Namespaces that have concrete rules define the subject property and its types.      ├ eqptcap:MfgDef The manufacturing-related properties such as PID and SKU.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqptcap:PhysicalDef Physical properties such as maximum temperature and removal conditions.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqptcap:SfpMfgDef The small form-factor pluggable transceiver (SFP) manufacturing-related properties.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ cdp:Entity Holds cdp control plane entity information    ├ cdp:Inst The object that represents the CDP instance information. Currently only one CDP instance is supported.      ├ cdp:If CDP information that is operated at a interface level. CDP is used to obtain protocol addresses of neighboring devices and discover the platform of those devices. CDP is also used to display information about the neighboring interfaces/devices.        ├ cdp:AdjEp The CDP neighbor information. CDP is enabled by default on all supported interfaces.          ├ cdp:AdjStats CDP adjacency statistics          ├ cdp:IntfAddr The CDP interface address received from CDP neighbor.          ├ cdp:MgmtAddr The management device IP address received from CDP neighbor.        ├ cdp:IfStats CDP interface statistics        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ nw:RtPathToIf A target relation to the interface information.  ├ cert:Entity  Holds rpm control plane entity information  ├ cloud:Controller  This MO contains networking information of Cloud Controller  ├ cloudsec:Entity  Holds cloudsec control plane entity information    ├ cloudsec:Inst  This objects hold per cloudsec instance information. There is only one instance of cloudsec running in the system today      ├ cloudsec:Dom  Cloudsec Enabled Domain (infra vrf) Information        ├ cloudsec:If  Cloudsec enabled l3 sub interface facing the external network          ├ cloudsec:SaPeer  SA Peer            ├ cloudsec:SaRxKey  Peer SA RX Key              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)            ├ cloudsec:SaTxKey  Peer SA TX Key              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)            ├ cloudsec:TepRxCounter               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ cloudsec:TepTxCounter               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ nw:RtPathToIf A target relation to the interface information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ cloudsec:SpRxKeySt         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ cloudsec:SpTxKeySt  Internal Mo for tracking tx key status on spine        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ cnw:AggrIf The aggregated interface assigned to the node cluster.    ├ cnw:RsActiveIf A source relation to the physical interface assigned to the node cluster.    ├ cnw:RsMbrIfs A source relation to the physical interface assigned to the node cluster.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fv:DomDef The domain information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fv:RsDomDefNs A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsDomDefNsLocal A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fv:RtToDomDef A target relation to the domain definition. This is an internal object.      ├ fv:RtToFvDomDef       ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RsAttEntityPCons     ├ l1:RsCdpIfPolCons A source relation to CDP interface policy parameters. Note that this relation is an internal object.    ├ l1:RsCeMonitorPolCons     ├ l1:RsCoppIfPolCons  Relationship with the coppIf policy consumed by this physical interface    ├ l1:RsDwdmFabIfPolCons     ├ l1:RsDwdmIfPolCons     ├ l1:RsFIfPolCons  Relationship with the FIfPol policy consumed by this physical interface    ├ l1:RsFcIfPolCons  Relationship with the fcIfPol policy consumed by this physical interface    ├ l1:RsHIfPolCons A source relation to the host interface policy. Note that this relation is an internal object.    ├ l1:RsIpv4MonitorPolCons  Relationship with the Monitor policy consumed by this physical interface    ├ l1:RsIpv6MonitorPolCons     ├ l1:RsL2IfPolCons     ├ l1:RsL2PortAuthCons  Relationship with the Port Authentication policy consumed by this physical interface    ├ l1:RsL2PortSecurityCons  Relationship with the Port Security policy consumed by this physical interface    ├ l1:RsL3IfPolCons  Relationship with the L3 interface policy consumed by this physical interface    ├ l1:RsLacpIfPolCons A source relation to the port-Level LACP member policy. Note that this relation is an internal object.    ├ l1:RsLinkFlapPolCons     ├ l1:RsLldpIfPolCons A source relation to the LLDP policy parameters for the interface. Note that this relation is an internal object.    ├ l1:RsMacsecFabPolCons     ├ l1:RsMacsecPolCons  Relationship with the cdp/lacp/lldp if policy consumed by this physical interface    ├ l1:RsMcpIfPolCons     ├ l1:RsMonPolIfPolCons A source relation to the base monitoring policy model. Note that this relation is an internal object.    ├ l1:RsPoeIfPolCons  Relationship with the poe policy consumed by this physical interface    ├ l1:RsQosEgressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Egress    ├ l1:RsQosIngressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Ingress    ├ l1:RsQosPfcIfPolCons  Relationship with the qosPfcPol policy consumed by this physical interface    ├ l1:RsQosSdIfPolCons  Relationship with the SdIfPol policy consumed by this physical interface    ├ l1:RsStormctrlIfPolCons     ├ l1:RsStpIfPolCons A source relation to the Spanning-Tree Protocol (STP) policy. Note that this relation is an internal object.    ├ l1:RtBrConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtEncPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RtEthIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtExtConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtLabelEpToAllowedEthIf  Associations to the allowed interfaces for the label    ├ l1:RtLabelEpToConsumerEthIf  Associations to the interfaces consuming the label    ├ l1:RtLsNodeToIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtNodePortAtt A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.    ├ l1:RtToObservedEthIf     ├ nw:RtPathToIf A target relation to the interface information.  ├ cnw:PhysIf The physical interface assigned to the node cluster.    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ cnw:RtActiveIf A target relation to the physical interface assigned to the node cluster.    ├ cnw:RtMbrIfs A target relation to the physical interface assigned to the node cluster.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fv:DomDef The domain information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fv:RsDomDefNs A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsDomDefNsLocal A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fv:RtToDomDef A target relation to the domain definition. This is an internal object.      ├ fv:RtToFvDomDef       ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RsAttEntityPCons     ├ l1:RsCdpIfPolCons A source relation to CDP interface policy parameters. Note that this relation is an internal object.    ├ l1:RsCeMonitorPolCons     ├ l1:RsCoppIfPolCons  Relationship with the coppIf policy consumed by this physical interface    ├ l1:RsDwdmFabIfPolCons     ├ l1:RsDwdmIfPolCons     ├ l1:RsFIfPolCons  Relationship with the FIfPol policy consumed by this physical interface    ├ l1:RsFcIfPolCons  Relationship with the fcIfPol policy consumed by this physical interface    ├ l1:RsHIfPolCons A source relation to the host interface policy. Note that this relation is an internal object.    ├ l1:RsIpv4MonitorPolCons  Relationship with the Monitor policy consumed by this physical interface    ├ l1:RsIpv6MonitorPolCons     ├ l1:RsL2IfPolCons     ├ l1:RsL2PortAuthCons  Relationship with the Port Authentication policy consumed by this physical interface    ├ l1:RsL2PortSecurityCons  Relationship with the Port Security policy consumed by this physical interface    ├ l1:RsL3IfPolCons  Relationship with the L3 interface policy consumed by this physical interface    ├ l1:RsLacpIfPolCons A source relation to the port-Level LACP member policy. Note that this relation is an internal object.    ├ l1:RsLinkFlapPolCons     ├ l1:RsLldpIfPolCons A source relation to the LLDP policy parameters for the interface. Note that this relation is an internal object.    ├ l1:RsMacsecFabPolCons     ├ l1:RsMacsecPolCons  Relationship with the cdp/lacp/lldp if policy consumed by this physical interface    ├ l1:RsMcpIfPolCons     ├ l1:RsMonPolIfPolCons A source relation to the base monitoring policy model. Note that this relation is an internal object.    ├ l1:RsPoeIfPolCons  Relationship with the poe policy consumed by this physical interface    ├ l1:RsQosEgressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Egress    ├ l1:RsQosIngressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Ingress    ├ l1:RsQosPfcIfPolCons  Relationship with the qosPfcPol policy consumed by this physical interface    ├ l1:RsQosSdIfPolCons  Relationship with the SdIfPol policy consumed by this physical interface    ├ l1:RsStormctrlIfPolCons     ├ l1:RsStpIfPolCons A source relation to the Spanning-Tree Protocol (STP) policy. Note that this relation is an internal object.    ├ l1:RtBrConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtEncPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RtEthIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtExtConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtLabelEpToAllowedEthIf  Associations to the allowed interfaces for the label    ├ l1:RtLabelEpToConsumerEthIf  Associations to the interfaces consuming the label    ├ l1:RtLsNodeToIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtNodePortAtt A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.    ├ l1:RtToObservedEthIf     ├ nw:RtPathToIf A target relation to the interface information.    ├ tag:Annotation     ├ tag:Tag   ├ comm:RLTepInfo  This object holds TEP address for RemoteLeaf information .    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ comm:SshInst     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tag:Annotation     ├ tag:Tag   ├ comm:TelnetInst  Service configuration for various services    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tag:Annotation     ├ tag:Tag   ├ compat:SuppFw Firmware Versions compatible with running version Created on node to maintain list of compatible firmware  ├ configprofile:Catalog  Entity information    ├ configprofile:Entity  Domain (vrf) information  ├ coop:Entity The COOP control plane entity information.    ├ coop:Inst The per-COOP instance information. There is only one instance of this object present in the system.      ├ coop:AuthP  This object holds authentication policy information        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ coop:BD         ├ coop:RsBD2Dom  List of VRFs for Host-Route to be leaked      ├ coop:Dom Per COOP domain (vrf) information.        ├ coop:CitizenAdj The adjacency to the citizen node.        ├ coop:ConCitizenAdj  Adjacency to the citizen node(s) connected to this Oracle        ├ coop:Db An abstraction of the COOP database (repository).          ├ coop:CtxRec The context record.            ├ coop:RsCtx2Leaf A source relation to the COOP leaf records.          ├ coop:EpRec The endpoint records.            ├ coop:EpVpcRec The Endpoint Virtual Port Channel (VPC) citizen record.            ├ coop:Ipv4Rec The IPv4 entries in an endpoint record.            ├ coop:Ipv6Rec The IPv6 entries in the COOP endpoint record.            ├ coop:RtHBucket2EpRec  List of EP record collided onto this bucket          ├ coop:FabMcGrpv4Rec  Fabric IPv4 multicast group records            ├ coop:RsFabMcgrp2Leaf  List of interested leafs          ├ coop:IpOnlyRec             ├ coop:RtHBucket2IpOnlyRec  List of IP only record collided onto this bucket          ├ coop:LeafRec The COOP leaf records.            ├ coop:RtCtx2Leaf A target relation to the COOP leaf records.            ├ coop:RtDTEp2Leaf  List of leafs publishing this DTEP            ├ coop:RtFabMcgrp2Leaf  List of interested leafs            ├ coop:RtMcgrp2Leaf A target relation to the COOP leaf records.            ├ coop:RtMrtr2Leaf A target relation to the COOP leaf records.          ├ coop:McGrpv4Rec The IPv4 multicast group records.            ├ coop:RsMcgrp2Leaf A source relation to the COOP leaf records.          ├ coop:McGrpv6Rec The IPv6 multicast group records.            ├ coop:RsMcgrp2Leaf A source relation to the COOP leaf records.          ├ coop:MrtrRec The Mrouter records.            ├ coop:RsMrtr2Leaf A source relation to the COOP leaf records.          ├ coop:VpcRec The Virtual Port Channel (VPC) records.            ├ coop:VpcNodeRec Per-node in the Virtual Port Channel (VPC) configuration record.        ├ coop:DomAf  This object holds per address family COOP information          ├ coop:ProxyAddr           ├ coop:RibLeakP         ├ coop:OracleAdj The adjacency to the Oracle node information.          ├ coop:ShardSt The COOP shard state.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ coop:RepP All the repository policies information.          ├ coop:Ep The COOP static endpoint.            ├ coop:IpAddr The IP entries in the static endpoint.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ coop:RibLeakP         ├ coop:RtBD2Dom  List of VRFs for Host-Route to be leaked        ├ coop:ShardSt The COOP shard state.        ├ coop:TepDb  Abstraction of cooptep database (repository)          ├ coop:DTEp  Tunnel endpoints discovered through coop            ├ coop:RsDTEp2Leaf  List of leafs publishing this DTEP        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ copp:Entity Represents control plane entity information.    ├ copp:Class Represents a control plane policing (COPP) policy class, which contains a set of rules describing policer rates.      ├ copp:If  Interface info        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ copp:MatchProto Represents a set of protocols that match the policer.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ copp:Rule  Holder for copp class policy, each class describes a set of rules describing the policer rates      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ copp:Filter  Filter        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ cpinfra:Entity  Holds l3vm entity information    ├ cpinfra:Inst  This objects hold per l3vm instance information. There is only one instance of l3vm running in the system today      ├ cpinfra:BgpHBProfile       ├ cpinfra:CoopHBProfile       ├ cpinfra:Iod  This objects hold runtime information on l3vm tables      ├ cpinfra:L3vmHBProfile       ├ cpinfra:NtpdHBProfile       ├ cpinfra:RpmHBProfile       ├ cpinfra:SmmHBProfile       ├ cpinfra:Uribv4HBProfile       ├ cpinfra:Uribv6HBProfile   ├ datetime:ClkPol Represents the date/time clock policy information.    ├ datetime:NTPIffKey  NTP Secure Session IFF Key      ├ datetime:RtNtpProviderToNTPIffKey  Relation to Secure Session key Cardinality is 1-to-n but 1-to-1 should be enforced      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ datetime:NtpAuth The NTP client authentication configures the device to authenticate the time sources to which the local clock is synchronized. When you enable NTP authentication, the device synchronizes to a time source only if the source carries one of the authentication keys specified by the ntp trusted-key command. The device drops any packets that fail the authentication check and prevents them from updating the local clock. NTP authentication is disabled by...      ├ datetime:RtNtpProviderToNtpAuth A target relation to the NTP client authentication.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ datetime:NtpProvider Represents the date/time NTP provider information for the switch.      ├ datetime:NtpProviderStatus         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ datetime:RsNtpProviderToNTPIffKey  Relation to Secure Session key Cardinality is 1-to-n but 1-to-1 should be enforced      ├ datetime:RsNtpProviderToNtpAuth A source relation to the date/time NTP authorization.      ├ datetime:Statistics       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ datetime:Ntpq The Network Time Protocol (NTP) synchronizes the time of day among a set of distributed time servers and clients so that you can correlate events when you receive system logs and other time-specific events from multiple network devices. NTP uses the User Datagram Protocol (UDP) as its transport protocol. All NTP communications use Coordinated Universal Time (UTC).    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ tag:AInst The label instance, which is contained by the taggable object.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ dhcp:Entity Holds DHCP control plane entity information.    ├ dhcp:Inst The DHCP instance information. There is only one instance of DHCP relay currently running in the system.      ├ dhcp:BootStrapLoader         ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ dhcp:ClientIf Used for showing client functionality on the interface.        ├ dhcp:ClientAddr The DHCP address received for the client.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:ClientResp The DHCP client response.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ dhcptlv:Complex The Complex type, length, and value (TLV), which contains basic TLVs.            ├ dhcptlv:Ip The IP type, length, and value (TLV).            ├ dhcptlv:Mac The Mac type, length, and value (TLV).            ├ dhcptlv:Text The text type, length, and value (TLV).            ├ dhcptlv:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).            ├ dhcptlv:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).            ├ dhcptlv:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).            ├ dhcptlv:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).          ├ dhcptlv:Ip The IP type, length, and value (TLV).          ├ dhcptlv:Mac The Mac type, length, and value (TLV).          ├ dhcptlv:Text The text type, length, and value (TLV).          ├ dhcptlv:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).          ├ dhcptlv:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).          ├ dhcptlv:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).          ├ dhcptlv:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:MsgStats The DHCP message statistics.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:MsgStatsv6           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:PseudoIf The Psuedo Interface definition.          ├ dhcptlvpol:Complex The Complex type, length, and value (TLV).            ├ dhcptlvpol:Ip The IP type, length, and value (TLV).            ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).            ├ dhcptlvpol:Text The text type, length, and value (TLV).            ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).            ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).            ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).            ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).          ├ dhcptlvpol:Ip The IP type, length, and value (TLV).          ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).          ├ dhcptlvpol:Text The text type, length, and value (TLV).          ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).          ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).          ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).          ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).          ├ nw:RtPathToIf A target relation to the interface information.        ├ dhcp:RsPseudoIf A source relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces that the dhcp requests is flooded.        ├ dhcptlvpol:Complex The Complex type, length, and value (TLV).          ├ dhcptlvpol:Ip The IP type, length, and value (TLV).          ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).          ├ dhcptlvpol:Text The text type, length, and value (TLV).          ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).          ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).          ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).          ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).        ├ dhcptlvpol:Ip The IP type, length, and value (TLV).        ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).        ├ dhcptlvpol:Text The text type, length, and value (TLV).        ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).        ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).        ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).        ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ nw:RtPathToIf A target relation to the interface information.      ├ dhcp:DiscvryIpRouteDef       ├ dhcp:RelayIf DHCP relay if used for representing relay functionality on the interface.        ├ dhcp:MsgStats The DHCP message statistics.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:MsgStatsv6           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:OptionDef The option definition. Each DHCP option is defined by a unique name, ID, and option data.          ├ dhcp:DiscNode The Discovered DHCP client node.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:Annotation             ├ tag:Tag           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ dhcp:RelayAddr The DHCP relay address.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ dhcp:RelayAddrStats The relay address statistics            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ dhcp:RelayGw           ├ dhcp:RsRelayAddrToProv           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:RelayIfStats The relay interface statistics.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dhcp:RelayIfStatsv6           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dhcptlvpol:Complex The Complex type, length, and value (TLV).          ├ dhcptlvpol:Ip The IP type, length, and value (TLV).          ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).          ├ dhcptlvpol:Text The text type, length, and value (TLV).          ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).          ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).          ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).          ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).        ├ dhcptlvpol:Ip The IP type, length, and value (TLV).        ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).        ├ dhcptlvpol:Text The text type, length, and value (TLV).        ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).        ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).        ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).        ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ nw:RtPathToIf A target relation to the interface information.      ├ dhcp:ServerIf DHCP server if not supported; defined for completeness.        ├ dhcptlvpol:Complex The Complex type, length, and value (TLV).          ├ dhcptlvpol:Ip The IP type, length, and value (TLV).          ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).          ├ dhcptlvpol:Text The text type, length, and value (TLV).          ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).          ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).          ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).          ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).        ├ dhcptlvpol:Ip The IP type, length, and value (TLV).        ├ dhcptlvpol:Mac The Mac type, length, and value (TLV).        ├ dhcptlvpol:Text The text type, length, and value (TLV).        ├ dhcptlvpol:UByte The 8-bit unsigned integer (UByte) type, length, and value (TLV).        ├ dhcptlvpol:UInt16 The 16-bit unsigned integer (UInt16) type, length, and value (TLV).        ├ dhcptlvpol:UInt32 The 32-bit unsigned integer (UInt32) type, length, and value (TLV).        ├ dhcptlvpol:UInt64 The 64-bit unsigned integer (UInt64) type, length, and value (TLV).        ├ nw:RtPathToIf A target relation to the interface information.      ├ dhcp:ServerInfo         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ dns:Entity The DNS control plane entity information    ├ dns:Prof The DNS instance information.      ├ dns:Dom The DNS domain uses a hierarchical scheme for establishing host names for network nodes and allows local control of the segments of the network through a client-server scheme. The DNS system can locate a network device by translating the hostname of the device into its associated IP address.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ dns:Provider The DNS provider is a DNS server that uses a hierarchical scheme for establishing host names for network nodes, which local control of the segments of the network through a client-server scheme. The DNS system can locate a network device by translating the hostname of the device into its associated IP address.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ dot1x:Entity  Holds dot1x control plane entity information    ├ dot1x:Inst  This objects hold per dot1x instance information. There is only one instance of dot1x running in the system today      ├ dot1x:If  This object holds dot1x information that is operated at a interface level        ├ dot1x:DAEp  This object holds dynamic Authenticated EP info          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ dot1x:DUEp         ├ dot1x:IfStats  Dot1x Interface Statistics          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ dot1x:VDAEp  This object holds dynamic Authenticated EP info. This is copied from concrete DAEp MO          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ nw:RtPathToIf A target relation to the interface information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ dot1x:Nic     ├ comp:EpPConn An object representing the connection information of a VM endpoint. This is used internally by the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ comp:Ip     ├ comp:PrimaryEncapDef       ├ comp:EpPConn An object representing the connection information of a VM endpoint. This is used internally by the system.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ comp:RsNicAdj A source relation to the connectivity to the external network. Note that this relation is an internal object.    ├ comp:RsUsegEpPD       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ comp:RtNic A target relation to the abstract class representing network interface cards. Note that this relation is an internal object.    ├ comp:RtToNic     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ dpp:Entity  Holds dpp control plane entity information    ├ dpp:Class  Holder for dpp class policy, each class describes a set of rules describing the policer rates      ├ dpp:Ckt  EPG vlan/vxlan cktEp info        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ dpp:If  Interface info          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ dpp:RsDppIfCreatedByFvIfConn  Relationship with the fvIfConn to be able to export the stats from dppIf to fvIfConn          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ dpp:If  Interface info        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ dpp:RsDppIfCreatedByFvIfConn  Relationship with the fvIfConn to be able to export the stats from dppIf to fvIfConn        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ eigrp:Entity The EIGRP control plane entity information.    ├ eigrp:Inst The EIGRP instance information.      ├ eigrp:Dom The EIGRP domain (VRF) information.        ├ eigrp:DomAf The EIGRP address family domain (VRF) information.          ├ eigrp:Db The EIGRP databases.            ├ eigrp:Route The EIGRP route information.              ├ eigrp:Nexthop The EIGRP next hop.                ├ eigrp:ExtCommNhRec The EIGRP nexthop extended community information.                ├ eigrp:ExtProtNhRec The EIGRP nexthop information for external routes. External routes are routes from a different protocol or from a different EIGRP AS.          ├ eigrp:DefRtLeakP The default route leak policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ eigrp:DomAfStats The EIGRP address family domain statistics.          ├ eigrp:Gr             ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ eigrp:InterLeakP The inter protocol route leak policy, which defines the distribution of routes from one protocol to another.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ eigrp:RibLeakP           ├ eigrp:StubP The stub policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ eigrp:If An EIGRP configured interface combines the benefits of distance vector protocols with the features of link-state protocols.          ├ eigrp:IfAf The address family interface.            ├ eigrp:AdjEp The neighbor information.              ├ eigrp:AdjStats The EIGRP neighborship statistics.            ├ eigrp:AuthP  This object holds authentication policy information              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ eigrp:IfAfStats The EIGRP interface statistics.            ├ eigrp:RtCtrlP The route control policy for routes coming/going over interfaces. There are few ways to apply this policy, controlling through route maps or prefix lists. The direction specifies whether to apply this policy in the incoming or outgoing direction              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ eigrp:RtMetricAlterP  Metric Alteration policy for EIGRP routes. Selection of routes for which metric has to be adjusted, can be done through route maps or prefix lists. The direction specifies whether to apply this policy for incoming or outgoing routes              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ eigrp:RtSum  This object holds summary address              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ eigrp:RtIfDefToEigrpIf A target relation to EIGRP interfaces.          ├ nw:RtPathToIf A target relation to the interface information.  ├ eqpt:Ch A hardware chassis container contains chassis properties such as its role in the fabric (spine/tor) and a description of switch.    ├ eqpt:BSlot The board slot.      ├ eqpt:Board The motherboard of the controller.        ├ eqpt:Asic The ASIC information container.          ├ eqpt:FwdInst  Forwarding information container          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:CPU A CPU information container.          ├ eqpt:Core An equipment core container.        ├ eqpt:Dimm A DIMM memory unit.        ├ eqpt:Flash A flash memory unit.          ├ eqpt:SsdStatsSOrder           ├ eqpt:SsdStatsWOrder           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Fpga A field-programmable gate array container.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ firmware:CompRunning Information about each equipment component firmware that is running.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Obfl The onboard failure log information.        ├ eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.        ├ eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:EjPol The ejector policy.    ├ eqpt:FCSlot A fabric card slot.      ├ eqpt:FC The fabric card, which connects different IO cards and stores all fabric related information.        ├ eqpt:Asic The ASIC information container.          ├ eqpt:FwdInst  Forwarding information container          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:CPU A CPU information container.          ├ eqpt:Core An equipment core container.        ├ eqpt:CpuP The CPU bound traffic port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Dimm A DIMM memory unit.        ├ eqpt:Ejec The ejector information.        ├ eqpt:EobcP An internal Ethernet out-of-band channel port. Note that all card component management is done via this port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:EpcP An internal EPC port (internal hi-gig links connecting the external IO ports).          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:Flash A flash memory unit.          ├ eqpt:SsdStatsSOrder           ├ eqpt:SsdStatsWOrder           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Fpga A field-programmable gate array container.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ firmware:CompRunning Information about each equipment component firmware that is running.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:LocLed A locator LED on chassis components.        ├ eqpt:Obfl The onboard failure log information.        ├ eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.        ├ eqpt:RtFcOdDiag A target relation to a fabric card connecting to different IO cards. Note that this relation is an internal object.        ├ eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:SpromLc A line card SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.          ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpSensorBlk A SPROM sensor block.            ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpromLcBlk A SPROM line card block.            ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.            ├ eqpt:SpSd A SPROM sensor data.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ firmware:CardRunning Information about each card firmware that is running.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ syshist:CardRstRec The card reset record.    ├ eqpt:FlashConfig  Configure Flash thresholds      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ eqpt:FtSlot A fan tray slot.      ├ eqpt:Ft The inventoried fan tray.        ├ eqpt:Ejec The ejector information.        ├ eqpt:Fan The fan in a fan tray.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:LocLed A locator LED on chassis components.        ├ eqpt:SpromFan The fan SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpromFanBlk A SPROM fan block.          ├ eqpt:SpromFanSN The fan SPROM serial number block.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:IndLed The locator LED for monitoring the component state.    ├ eqpt:LCSlot The slot for the module card.      ├ eqpt:LC A line card (IO card) contains IO ports and stores various line card related state mac addresses assigned to this card, such as whether the card went online.        ├ eqpt:Asic The ASIC information container.          ├ eqpt:FwdInst  Forwarding information container          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:CPU A CPU information container.          ├ eqpt:Core An equipment core container.        ├ eqpt:Dimm A DIMM memory unit.        ├ eqpt:Ejec The ejector information.        ├ eqpt:EobcP An internal Ethernet out-of-band channel port. Note that all card component management is done via this port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:FcP  FC port          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ eqpt:RsIoPPhysConf A source relation to an L1 Ethernet interface. Note that this relation is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:AInst The label instance, which is contained by the taggable object.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ eqpt:Flash A flash memory unit.          ├ eqpt:SsdStatsSOrder           ├ eqpt:SsdStatsWOrder           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Fpga A field-programmable gate array container.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ firmware:CompRunning Information about each equipment component firmware that is running.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:IoP The abstraction of an external IO port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ eqpt:RsIoPPhysConf A source relation to an L1 Ethernet interface. Note that this relation is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:AInst The label instance, which is contained by the taggable object.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ eqpt:LeafP A leaf port is an external IO port on a leaf.          ├ eqpt:BrkoutCap           ├ eqpt:BrkoutP  Breakout port for leafport/fabric port            ├ eqpt:LPort Removed, ignore              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ eqpt:RsIoPPhysConf A source relation to an L1 Ethernet interface. Note that this relation is an internal object.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:AInst The label instance, which is contained by the taggable object.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ eqpt:IndLed The locator LED for monitoring the component state.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ eqpt:LocLed A locator LED on chassis components.          ├ eqpt:RsIoPPhysConf A source relation to an L1 Ethernet interface. Note that this relation is an internal object.          ├ eqpt:RtCcepConn A target relation to an external IO port on a leaf. Note that this relation is an internal object.          ├ eqpt:RtLpOdDiag A target relation to the host facing ports. Note that this relation is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:AInst The label instance, which is contained by the taggable object.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ eqpt:LocLed A locator LED on chassis components.        ├ eqpt:Obfl The onboard failure log information.        ├ eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.        ├ eqpt:RtLcOdDiag A target relation to a line card. Note that this relation is an internal object.        ├ eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:SpromLc A line card SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.          ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpSensorBlk A SPROM sensor block.            ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpromLcBlk A SPROM line card block.            ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.            ├ eqpt:SpSd A SPROM sensor data.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ firmware:CardRunning Information about each card firmware that is running.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ syshist:CardRstRec The card reset record.    ├ eqpt:LocLed A locator LED on chassis components.    ├ eqpt:NSlot A NIC slot.      ├ eqpt:Nic A NIC card.        ├ eqpt:Asic The ASIC information container.          ├ eqpt:FwdInst  Forwarding information container          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:CPU A CPU information container.          ├ eqpt:Core An equipment core container.        ├ eqpt:Dimm A DIMM memory unit.        ├ eqpt:ExtAP An external extension port for a controller.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:Flash A flash memory unit.          ├ eqpt:SsdStatsSOrder           ├ eqpt:SsdStatsWOrder           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Fpga A field-programmable gate array container.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ firmware:CompRunning Information about each equipment component firmware that is running.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Obfl The onboard failure log information.        ├ eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.        ├ eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:PsuSlot The power supply slot.      ├ eqpt:Psu The power supply unit.        ├ eqpt:Fan The fan in a fan tray.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:SpromPsu A power supply unit SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpromPsuBlk A SPROM power supply unit block.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:SpromBP A backplane SPROM unit block.      ├ eqpt:BpSpLic The backplane SPROM license.      ├ eqpt:BpSpSSN The backplane SPROM second serial number.      ├ eqpt:BpSpWWN The backplane SPROM WWN.      ├ eqpt:SpCmnBlk A SPROM common block.      ├ eqpt:SpromBPBlk The SPROM BP block.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:Storage The storage of the controller.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:SupCSlot The supervisor slot identifier.      ├ eqpt:RtOosSlot       ├ eqpt:SupC The supervisor card, which contains the CPU running control plane.        ├ eqpt:Asic The ASIC information container.          ├ eqpt:FwdInst  Forwarding information container          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:CPU A CPU information container.          ├ eqpt:Core An equipment core container.        ├ eqpt:ConsP An external (debug) console port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:CpuP The CPU bound traffic port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Dimm A DIMM memory unit.        ├ eqpt:Ejec The ejector information.        ├ eqpt:EobcP An internal Ethernet out-of-band channel port. Note that all card component management is done via this port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:EpcP An internal EPC port (internal hi-gig links connecting the external IO ports).          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:Flash A flash memory unit.          ├ eqpt:SsdStatsSOrder           ├ eqpt:SsdStatsWOrder           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Fpga A field-programmable gate array container.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ firmware:CompRunning Information about each equipment component firmware that is running.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:LocLed A locator LED on chassis components.        ├ eqpt:MgmtP The external management port.          ├ eqpt:IndLed The locator LED for monitoring the component state.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ eqpt:LocLed A locator LED on chassis components.        ├ eqpt:Obfl The onboard failure log information.        ├ eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.        ├ eqpt:RtSupCOdDiag A target relation to the supervisor card. Note that this relation is an internal object.        ├ eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:SpromSup The supervisor SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.          ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpSensorBlk A SPROM sensor block.            ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpromSupBlk The SPROM supervisor block.            ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.            ├ eqpt:SpSd A SPROM sensor data.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ firmware:CardRunning Information about each card firmware that is running.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ syshist:CardRstRec The card reset record.      ├ syshist:RemCardRstRec The remote card reset record.    ├ eqpt:SysCSlot A system controller slot.      ├ eqpt:RtOosSlot       ├ eqpt:SysC The system controller card.        ├ eqpt:Asic The ASIC information container.          ├ eqpt:FwdInst  Forwarding information container          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:CPU A CPU information container.          ├ eqpt:Core An equipment core container.        ├ eqpt:Dimm A DIMM memory unit.        ├ eqpt:EobcP An internal Ethernet out-of-band channel port. Note that all card component management is done via this port.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:EpcP An internal EPC port (internal hi-gig links connecting the external IO ports).          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag         ├ eqpt:Flash A flash memory unit.          ├ eqpt:SsdStatsSOrder           ├ eqpt:SsdStatsWOrder           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Fpga A field-programmable gate array container.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ firmware:CompRunning Information about each equipment component firmware that is running.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:LocLed A locator LED on chassis components.        ├ eqpt:Obfl The onboard failure log information.        ├ eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.        ├ eqpt:RtSysCOdDiag A target relation to the system controller card. Note that this relation is an internal object.        ├ eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:SpromLc A line card SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.          ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpSensorBlk A SPROM sensor block.            ├ eqpt:SpSd A SPROM sensor data.          ├ eqpt:SpromLcBlk A SPROM line card block.            ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.            ├ eqpt:SpSd A SPROM sensor data.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ firmware:CardRunning Information about each card firmware that is running.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ syshist:CardRstRec The card reset record.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ eqpt:Entity The equipment policy container.    ├ eqpt:ConsoleP The console policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ eqpt:PsgP The power supply group policy.      ├ eqpt:RsPsuInstPolCons A source relation to a power redundancy policy. Note that this relation is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:SlotP The policy container for a slot.      ├ eqpt:BrkoutPortP  Port policy        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ eqpt:PortP         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ eqpt:ExtCh The fabric extended chassis.    ├ eqpt:ExtChCardSlot The extended chassis card slot.      ├ eqpt:ExtChCard The module on an extension chassis. The extended chassis is an extension of the fabric.        ├ eqpt:Asic The ASIC information container.          ├ eqpt:FwdInst  Forwarding information container          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:CPU A CPU information container.          ├ eqpt:Core An equipment core container.        ├ eqpt:Dimm A DIMM memory unit.        ├ eqpt:ExtChCPU The extended chassis CPU.        ├ eqpt:ExtChFP An extension chassis port, which is connected to a leaf.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ eqpt:RsIoPPhysConf A source relation to an L1 Ethernet interface. Note that this relation is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:AInst The label instance, which is contained by the taggable object.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ eqpt:ExtChHP The extension chassis port connected to hosts.          ├ eqpt:LPort Removed, ignore            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ eqpt:RsIoPPhysConf A source relation to an L1 Ethernet interface. Note that this relation is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:AInst The label instance, which is contained by the taggable object.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ eqpt:Flash A flash memory unit.          ├ eqpt:SsdStatsSOrder           ├ eqpt:SsdStatsWOrder           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Fpga A field-programmable gate array container.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ firmware:CompRunning Information about each equipment component firmware that is running.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:Obfl The onboard failure log information.        ├ eqpt:RsMonPolModulePolCons A source relation to a monitoring policy. Note that this relation is an internal object.        ├ eqpt:RtExtChCardOdDiag A target relation to the extended chassis card. Note that this relation is an internal object.        ├ eqpt:Sensor A temperature sensor monitors the on-board temperature on the chassis. The temperatures are an input into the fan control algorithm. The chassis software adjusts fan speed to keep all sensors within normal operating conditions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:AInst The label instance, which is contained by the taggable object.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ syshist:ExtChCardRstRec The extended chassis card reset record.    ├ eqpt:ExtChLocLed A locator LED on extended chassis components.    ├ eqpt:FtSlot A fan tray slot.      ├ eqpt:Ft The inventoried fan tray.        ├ eqpt:Ejec The ejector information.        ├ eqpt:Fan The fan in a fan tray.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:LocLed A locator LED on chassis components.        ├ eqpt:SpromFan The fan SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpromFanBlk A SPROM fan block.          ├ eqpt:SpromFanSN The fan SPROM serial number block.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:PsuSlot The power supply slot.      ├ eqpt:Psu The power supply unit.        ├ eqpt:Fan The fan in a fan tray.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ eqpt:IndLed The locator LED for monitoring the component state.        ├ eqpt:SpromPsu A power supply unit SPROM.          ├ eqpt:SpCmnBlk A SPROM common block.          ├ eqpt:SpromPsuBlk A SPROM power supply unit block.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ eqpt:RtOosSlot       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:SpromBP A backplane SPROM unit block.      ├ eqpt:BpSpLic The backplane SPROM license.      ├ eqpt:BpSpSSN The backplane SPROM second serial number.      ├ eqpt:BpSpWWN The backplane SPROM WWN.      ├ eqpt:SpCmnBlk A SPROM common block.      ├ eqpt:SpromBPBlk The SPROM BP block.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqpt:SpromSup The supervisor SPROM.      ├ eqpt:SpCmnBlk A SPROM common block.      ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.      ├ eqpt:SpSd A SPROM sensor data.      ├ eqpt:SpSensorBlk A SPROM sensor block.        ├ eqpt:SpSd A SPROM sensor data.      ├ eqpt:SpromSupBlk The SPROM supervisor block.        ├ eqpt:SpPd The SPROM port data. The SPROM on the device contains detailed information about the hardware, including serial, part, and revision numbers.        ├ eqpt:SpSd A SPROM sensor data.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ firmware:ExtChRunning Information about the extended chassis firmware.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ tag:AInst The label instance, which is contained by the taggable object.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ eqpt:FeatureEx     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ eqpt:ReloadSwitch     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ eqptcapacity:Entity     ├ eqptcapacity:FSPartition  File system partitions      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ eqptdiag:Entity Diag-related entity information    ├ eqptdiag:Rule       ├ eqptdiag:Subj         ├ eqptdiag:PortTestStats         ├ eqptdiag:Rslt         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ eqptdiagp:GrpTests The diagnostic group to diagnostic test mappings.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ ethpm:Entity Entity    ├ ethpm:Inst Stores global configuration for a running EthPM instance. (one instance per system)      ├ ethpm:ErrDisRecover The global configuration for error-disable recovery.        ├ ethpm:Event           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ ethpm:RsErrDisRecoverPolCons A source relation to the error-disable recovery policy.      ├ ethpm:InstRuntime Internal object: Global runtime state of the ethpm process.      ├ ethpm:Module Stores the runtime state associated with a module inside ethpm.      ├ ethpm:Vlan Stores the runtime state of VLANs inside ethpm  ├ fabrgm:Entity  Holds fabric routed multicast group manager entity information    ├ fabrgm:Inst  This objects hold per fabrgm instance information. There is only one instance of fabrgm running in the system today      ├ fabrgm:Dom  This objects hold per fabrgm domain information        ├ fabrgm:Db  fabrgm databases          ├ fabrgm:Route         ├ fabrgm:DomInfo   ├ fabric:Decommission An object for decommissioning a node.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ fabric:LeafNodeRole   ├ fabric:MMUpgrader     ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ fabric:RemoteLeafNodeRole   ├ fabric:SpineNodeRole   ├ fabric:SystemInfo     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.  ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ fc:Entity  Holds Storage information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fc:UnifiedSlotProfile  Holds UP port config MO    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:FcPhysIf  Physical ethernet interface information holder      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fcpm:DOMStats  Digital Optical Monitor details        ├ fcpm:DOMCurrentStats  Dynamic Current Information per FC port info        ├ fcpm:DOMRxPwrStats  Dynamic Rx Power Information per FC port info        ├ fcpm:DOMTempStats  Temperature Dynamic per FC port info        ├ fcpm:DOMTxPwrStats  Dynamic Tx Power Information per FC port info        ├ fcpm:DOMVoltStats  Dynamic Voltage Information per FC port info      ├ fcpm:FcPhysIf  Physical interface information holder        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fcpm:PortCap         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fcpm:Fcot  This is the class for regualr fcot types.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fcpm:FcotX2  This is the class for X2 fcot types.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fcpm:PortCap       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l1:RsNfcIfPolCons  Relationship with the fc Interface policy consumed by this physical interface      ├ l1:RtFcBrConf  associated L1 FcPhysIf      ├ l1:RtFcMbrIfs  Aggregate if members      ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.      ├ nw:RtPathToIf A target relation to the interface information.      ├ pc:FcAggrMbrIf  AggrMbrIf class        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ rmon:IfFcmac  fcmac interface In Out statistics counters    ├ l2:FcAggrIf  A san port channel interface properties      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RsPcFcAggrBrConf  associated L1 FcAggrIf      ├ l2:RsSrvExtIfMap         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtSrvExtIfMap       ├ l2:TrafficMapConfIssue  Traffic map Config Issue        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ nw:RtPathToIf A target relation to the interface information.    ├ l2:FcBrIf  An fiber channel interface properties      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RsFcBrConf  associated L1 FcPhysIf      ├ l2:RsSrvExtIfMap         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtSrvExtIfMap       ├ l2:TrafficMapConfIssue  Traffic map Config Issue        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ nw:RtPathToIf A target relation to the interface information.    ├ l2:VfcIf  An fiber channel interface properties      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RsSrvExtIfMap         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtSrvExtIfMap       ├ l2:TrafficMapConfIssue  Traffic map Config Issue        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ nw:RtPathToIf A target relation to the interface information.    ├ pc:FcAggrIf  Aggregated interface, collection of physical ports; aka port channel      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fcpm:FcAggrIf  Port-channel interface information holder        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fcpm:PortCap         ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l1:RsNfcIfPolCons  Relationship with the fc Interface policy consumed by this physical interface      ├ l1:RtFcBrConf  associated L1 FcPhysIf      ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.      ├ nw:RtPathToIf A target relation to the interface information.      ├ pc:RsFcLacpPolCons  lacp Lag Policy      ├ pc:RsFcMbrIfs  Aggregate if members        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ pc:RtFcAccBndlGrpToFcAggrIf  Association to the port channel created by this BndlGrp      ├ pc:RtPcFcAggrBrConf  associated L1 FcAggrIf      ├ rmon:IfFcmac  fcmac interface In Out statistics counters  ├ fcoe:Entity  Holds Fcoe-mgr control plane entity information    ├ fcoe:Inst  This objects hold per fcoe-mgr instance information. There is only one instance of fcoe-mgr running in the system today      ├ fcoe:FcAggrIf         ├ fcoe:FcAggrLogin       ├ fcoe:FcBrIf         ├ fcoe:FcBrLogin       ├ fcoe:VfcIf  This objects hold information per vfc.        ├ fcoe:VfcLogin  This objects hold information per vfc.  ├ fcpm:Entity     ├ fcpm:Inst  This class shall store the global configuration for a running FcPM instance. We have single FcPM in a system  ├ fhs:Entity  Holds FHS control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fhs:Inst  This objects hold per fhs instance information. There is only one instance of fhs running in the system today      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fhs:Dom  FHS Enabled Domain (vrf) Information        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fhs:BD  FHS Layer 2 Bridge Domain (bd) information          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fhs:ArpStats  This object holds the arp statistics          ├ fhs:CktEp  FHS EPG Circuit information            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fhs:TrustCtrl  FHS Trust Control information              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)            ├ health:Inst A base class for a health score instance.(Switch only)          ├ fhs:DhcpGuard  DHCP Guard Policy information            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fhs:Dhcpv4Stats  This object holds the dhcpv4 statistics          ├ fhs:Dhcpv6Stats  This object holds the dhcpv6 statistics          ├ fhs:IpInspect  IP Inspect Policy information            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ fhs:IpInspectProto  Inspect Protocol Policy information              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ fhs:BtEntryArp  EP binding entry learnt from ARP              ├ fhs:BtEntryData  EP binding entry learnt from data packets              ├ fhs:BtEntryDhcp  EP binding entry learnt from DHCP              ├ fhs:BtEntryLocal  Binding entry learnt from switch local addresses              ├ fhs:BtEntryNd  EP binding entry learnt from ND              ├ fhs:BtEntryStatic  EP binding entry learnt from static configuration              ├ health:Inst A base class for a health score instance.(Switch only)            ├ health:Inst A base class for a health score instance.(Switch only)          ├ fhs:NdStats  This object holds the ND statistics          ├ fhs:RaGuard  RA Guard Policy information            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fhs:SrcGuard  IP Source Guard Policy information            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fhs:ViolationEvent  Violation            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)  ├ firmware:CatFwStatusCont The container for managed objects that represent the controller status.    ├ maint:CatUpgJob Specification for catalog policy enforcement status, which exists on every node where the policy is enforced.  ├ firmware:CtrlrFwStatusCont Firmware status container object for a controller contains objects that represent the status of the firmware management of a controller.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ firmware:CtrlrRunning Information about each controller firmware that is running.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ maint:UpgJob Specification for the maintenance policy enforcement status on a node. This object exists on every node where the policy is enforced.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ maint:NodeInMaint A scheduler keeps a list consisting only of nodes with an upgrade in progress. This object is used by the scheduler to keep track of nodes in the installation and only exists on the controller.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ maint:RsWindowStarted A source relation to the container for scheduled windows.      ├ maint:UpgJobFault         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)  ├ firmware:FwStatusCont The container of managed objects that represent the firmware policy status.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ firmware:Running Information about switch firmware running on a node.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ maint:UpgJob Specification for the maintenance policy enforcement status on a node. This object exists on every node where the policy is enforced.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ maint:NodeInMaint A scheduler keeps a list consisting only of nodes with an upgrade in progress. This object is used by the scheduler to keep track of nodes in the installation and only exists on the controller.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ maint:RsWindowStarted A source relation to the container for scheduled windows.      ├ maint:UpgJobFault         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)  ├ fv:EpNs Policy element-specific information for endpoints.  ├ fv:ImplicitStaleEpCont  Holder of PE specific information of implicit stale endpoints    ├ fv:ImplicitStaleEp  PE specific information of implicit stale endpoint  ├ fv:StaleTunEpCont  Holder of PE specific information of stale tunnel endpoints    ├ fv:StaleTunEp  PE specific information of stale tunnel endpoint  ├ glean:Entity Control plane entity information for this glean.    ├ glean:Inst Glean instance information.      ├ glean:Dom Domain (VRF) information for this glean.        ├ glean:BD Layer 2 domain (BD) information for this glean.          ├ glean:Gateway Gateway information. For a given BD, there can be multiple gateways.  ├ health:Inst A base class for a health score instance.(Switch only)  ├ hsrp:Entity  Holds HSRP control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ hsrp:Inst  This objects holds HSRP instance information. There is      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ hsrp:Dom  This object holds per hsrp domain (vrf) information        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ hsrp:If  This object holds interface information          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ hsrp:GroupV1  Object represents HSRP group for HSRP version 1.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ hsrp:Addr  Class for HSRP secondary vips              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)            ├ hsrp:AuthP               ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ hsrp:GroupStats  Object representing HSRP Groups stats data            ├ hsrp:Peer  Class for HSRP Peers Active/Standby          ├ hsrp:GroupV2             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ hsrp:Addr  Class for HSRP secondary vips              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)            ├ hsrp:AuthP               ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ hsrp:GroupStats  Object representing HSRP Groups stats data            ├ hsrp:Peer  Class for HSRP Peers Active/Standby          ├ hsrp:IfStats  Object representing HSRP Interface stats data          ├ nw:RtPathToIf A target relation to the interface information.  ├ icmpv4:Entity Internet Control Message Protocol (ICMPv4) control plane entity information.    ├ icmpv4:Inst Per Internet Control Message Protocol (ICMPv4) instance information. There is only one instance of icmpv4 currently running in the system.      ├ icmpv4:Dom Per Internet Control Message Protocol (ICMPv4) layer3 domain (vrf) information.        ├ icmpv4:If Internet Control Message Protocol (ICMPv4) information that is operated at the interface level.          ├ nw:RtPathToIf A target relation to the interface information.  ├ icmpv6:Entity Per Internet Control Message Protocol (ICMPv6) control plane entity information.    ├ icmpv6:Inst Per Internet Control Message Protocol (ICMPv6) instance information. There is only one instance currently running in the system.      ├ icmpv6:If Per Internet Control Message Protocol (ICMPv6) information that is operated at the interface level.        ├ icmpv6:IfStats         ├ nw:RtPathToIf A target relation to the interface information.      ├ icmpv6:IfStats   ├ igmp:Entity  Holds igmp control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ igmp:Inst  This objects hold per igmp instance information. There is only one instance of igmp running in the system today      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ igmp:Dom  This objects hold per igmp domain information        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ igmp:Db  IGMP databases          ├ igmp:Route  IGMP Group/Src MOs            ├ igmp:Oif  IGMP Oif MOs. We create one object per interface in the oif list        ├ igmp:If  This objects hold per igmp interface information          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ igmp:IfStats  IGMP Interface Stats Oper MO          ├ igmp:QuerierP  This object holds querier information per interface            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ igmp:RepP  This object holds igmp reports policy state per Interface          ├ igmp:ResP  This object holds resource (router state) limit policy to limit amount of multicast routing state on the router            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ igmp:RtIfDefToIgmpIf  Relationship to the IGMP interfaces          ├ igmp:StRepP  This object holds static igmp reports policy state per Interface            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ nw:RtPathToIf A target relation to the interface information.        ├ igmp:SSMXlate  This objects hold per igmp domain information      ├ igmp:ExtDom  This objects hold per igmp external domain information        ├ igmp:ExtIf  This objects hold per igmp external interface information          ├ nw:RtPathToIf A target relation to the interface information.  ├ igmpsnoop:Entity Holds IGMP control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ igmpsnoop:Inst Holds per IGMP instance information. There is only one instance of IGMP running in the system today.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ igmpsnoop:Dom An IGMP snooping domain, which is a bridge domain (BD) in which IGMP snooping is enabled. When an IGMP querier is in the network, it sends periodic IGMP queries that trigger IGMP report messages from hosts that want to receive IP multicast traffic. IGMP snooping listens to these IGMP reports to establish appropriate forwarding        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ igmpsnoop:CktEp  Circuit endpoint representing EPG          ├ igmpsnoop:ACtrlP  Route control policy for igmp multicast snoop.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ igmpsnoop:TgtIf  Target Interface (outgoing interface list)              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag           ├ igmpsnoop:StMcGrp  Multicast Snoop Configured statically            ├ igmpsnoop:McSrc  IPMC Source IP              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ igmpsnoop:TgtIf  Target Interface (outgoing interface list)                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ tag:Annotation               ├ tag:Tag           ├ nlb:StMacGrp  Multicast Snoop Configured statically            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ nlb:NlbTgtIf  Target Interface (outgoing interface list)              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ tag:Annotation             ├ tag:Tag         ├ igmpsnoop:Db Represents all the IGMP Snooping database information.          ├ igmpsnoop:McGrpRec Represents the Multicast Group records information.            ├ igmpsnoop:EpgRec Represents the endpoint group (EPG) entries in the Multicast group record information.              ├ igmpsnoop:ReportRec Represents the IGMP Snooping report record information snooped by the igmp-snoop application                ├ igmpsnoop:OIFRec Represents the IGMP Snooping outgoing interface list (OIF) information.                  ├ igmpsnoop:HostRec Used for Explicit Host Tracking.            ├ igmpsnoop:ReportRec Represents the IGMP Snooping report record information snooped by the igmp-snoop application              ├ igmpsnoop:OIFRec Represents the IGMP Snooping outgoing interface list (OIF) information.                ├ igmpsnoop:HostRec Used for Explicit Host Tracking.        ├ igmpsnoop:DomStats Use the show ip IGMP snooping statistics vlan command to display IGMP snooping statistics. You can see the virtual port channel (vPC) statistics in this output. Use the clear ip igmp snooping statistics vlan command to clear IGMP snooping statistics.        ├ igmpsnoop:QuerierP When an IGMP snooping querier is enabled on a leaf, it sends out periodic IGMP queries on front panel ports of a BD on that leaf.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ igmpsnoop:QuerierSt Shows the IGMP Snoop querier state.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ igmpsnoop:RtrIf The Multicast router interface.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ igmpsnoop:StRtrIf This object represents the multicast router if that is configured statically.          ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.          ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf          ├ nw:RtPathToIf A target relation to the interface information.      ├ igmpsnoop:InstStats Holds per instance statistics operational information. This is a singleton within instance  ├ im:Entity A stub to categorize the runtime states of the interface manager module.    ├ im:ForcedBrkoutInst       ├ im:ForcedBrkoutPortP  Forced Breakout Port policy        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ im:Inst A container that stores the global runtime state of the interface manager module.      ├ im:Capability An object that contains the capability information of the in-band port types.      ├ im:Module The runtime state of a module.        ├ im:PhysIf The additional runtime state information of management interfaces.        ├ im:PortInfo The information on different port-types in a module.  ├ infrasec:Entity  Holds vmmqos control plane entity information    ├ infrasec:Policy  InfraSecPolicy definitions      ├ infrasec:Entry  InfraSecPolicy Entry definition  ├ ipagectrl:Entity  IP Aging policy container    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ ipagectrl:IpAgingP  Fabric IP Aging policy      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ ipsec:Entity  Holds IPSec entity information    ├ ipsec:Inst  This objects holds IPSEC instance information. There is only one instance of IPSEC supported currently      ├ ipsec:StSecAssoc  This object holds Static Security association policy information        ├ ipsec:AuthP  Authentication Policy assocaited to the SA        ├ ipsec:EncrP  Encryption Policy for ESP        ├ ipsec:RtAreaSecAssocAtt  ipsec SA        ├ ipsec:RtDomSecAssocAtt  ipsec SA        ├ ipsec:RtIfSecAssocAtt  ipsec SA  ├ ipv4:Entity A container for IPV4 control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ ipv4:Inst A container for IPV4 instance information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ ipv4:Dom The domain (VRF) information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ ipv4:If A container for IPV4 information that is operated at an interface level.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv4:Addr An interface address.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ ip:RsAddrToIpDef             ├ ip:RsIpAddr A source relation to the connectivity parameters for an interface.            ├ ip:RsRtDefIpAddr A source relation to route definitions.          ├ ipv4:ForwarderAddr  Interface address            ├ ip:RsAddrToIpDef             ├ ip:RsIpAddr A source relation to the connectivity parameters for an interface.            ├ ip:RsRtDefIpAddr A source relation to route definitions.          ├ nw:RtPathToIf A target relation to the interface information.        ├ ipv4:Route The static route definitions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ ip:RsRouteToIfConn A source relation to the connectivity parameters for an interface.            ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.              ├ ip:RsConsRoot           ├ ip:RsRouteToLeakRouteIntPfx  Relation to the leakRouteIntPfx, which is used to ensure that a route is reference counted when coming from an explicit route-map for leak services, configured by the user          ├ ip:RsRouteToRouteDef A source relation to route definitions.            ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.              ├ ip:RsConsRoot           ├ ipv4:Nexthop The next hops for the static route.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ ip:RsNexthopToNexthopDef A source relation to the next hops for the static route.            ├ ip:RsNexthopToProtG A source relation to an abstraction of the VPC protection group.          ├ ipv4:NexthopStub             ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ ip:RsNexthopToNexthopDef A source relation to the next hops for the static route.            ├ ip:RsNexthopToProtG A source relation to an abstraction of the VPC protection group.          ├ vz:PcTagCons             ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ tag:Annotation             ├ tag:Tag         ├ ipv4:RouteEP  Static route IP Endpoint definitions          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv4:L3AnycastEP  This MO indicates RouteEP is anycast and provdies MAC for validating IP/MAC combination            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv4:NexthopEP  Nexthop EP for the static route            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv4:NlbVip  This MO indicates RouteEP is an NLB            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)  ├ ipv6:Entity The IPv6 entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ ipv6:Inst The IPv6 information. In the current implementation, only one instance of IPv6 is running in the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ ipv6:Dom The domain (VRF) information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ ipv6:If The IPv6 interface information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv6:Addr An interface address.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ ip:RsAddrToIpDef             ├ ip:RsIpAddr A source relation to the connectivity parameters for an interface.            ├ ip:RsRtDefIpAddr A source relation to route definitions.          ├ ipv6:ForwarderAddr  Interface address            ├ ip:RsAddrToIpDef             ├ ip:RsIpAddr A source relation to the connectivity parameters for an interface.            ├ ip:RsRtDefIpAddr A source relation to route definitions.          ├ ipv6:LLaddr             ├ ip:RsAddrToIpDef             ├ ip:RsIpAddr A source relation to the connectivity parameters for an interface.            ├ ip:RsRtDefIpAddr A source relation to route definitions.          ├ nw:RtPathToIf A target relation to the interface information.        ├ ipv6:Route The static route definitions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ ip:RsRouteToIfConn A source relation to the connectivity parameters for an interface.            ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.              ├ ip:RsConsRoot           ├ ip:RsRouteToLeakRouteIntPfx  Relation to the leakRouteIntPfx, which is used to ensure that a route is reference counted when coming from an explicit route-map for leak services, configured by the user          ├ ip:RsRouteToRouteDef A source relation to route definitions.            ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.              ├ ip:RsConsRoot           ├ ipv6:Nexthop The next hops for the static route.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ ip:RsNexthopToNexthopDef A source relation to the next hops for the static route.            ├ ip:RsNexthopToProtG A source relation to an abstraction of the VPC protection group.          ├ ipv6:NexthopStub             ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ ip:RsNexthopToNexthopDef A source relation to the next hops for the static route.            ├ ip:RsNexthopToProtG A source relation to an abstraction of the VPC protection group.          ├ vz:PcTagCons             ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ tag:Annotation             ├ tag:Tag         ├ ipv6:RouteEP  Static route IP Endpoint definitions          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv6:L3AnycastEP  This MO indicates RouteEP is anycast and provdies MAC for validating IP/MAC combination            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv6:NexthopEP  Nexthop Endpoint for the static route            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ ipv6:NlbVip  This MO indicates RouteEP is an NLB            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)  ├ isis:Entity IS-IS control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ isis:Inst Per- IS-IS instance information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ isis:Dom The IS-IS domain (vrf) information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ isis:Db The IS-IS database information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ isis:DTEp The discovered IP security (IPsec) endpoints. The deployment of IPsec with Internet Key Exchange (IKE) requires the configuration of a crypto map for every peer which identifies the endpoint to which a secure tunnel is to be established.          ├ isis:GrpRec The database of fabric multicast group elements.            ├ isis:BdIdRec The IS-IS multicast address family feature provides support for multiple logical topologies over a single physical network. This object contains bridge domain records active for this multicast group element.            ├ isis:FtagOifRec Per-forwarding tag (FTAG) OIF list record.              ├ isis:OifListLeaf The outgoing interface list on the leaf switch.              ├ isis:OifListSpine The outgoing interface list on the spine switch.            ├ isis:NodeIdRec The fabric nodes active for this multicast group element.            ├ isis:OifListLeaf The outgoing interface list on the leaf switch.            ├ isis:OifListSpine The outgoing interface list on the spine switch.          ├ isis:LspRec The link state packet information records lists the device's neighbors and prefix reachability information.            ├ isis:ExtIsRec The extended IS record.            ├ isis:IpRec The IP Prefix record.            ├ isis:TlvRec The generic Type Length Value (TLV) record.          ├ isis:Nexthop The IS-IS next hop.            ├ isis:RtNhAtt A target relation to the IS-IS next hop.          ├ isis:NodeRec The node records.            ├ isis:GrpIdRec The multicast groups identifier record.          ├ isis:Route An ISIS route is a managed object that captures the routing information learned through ISIS protocol.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ health:Inst A base class for a health score instance.(Switch only)            ├ isis:RsNhAtt A source relation to the list of next hopss              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)              ├ tag:Annotation               ├ tag:Tag         ├ isis:DefRtLeakP The default route leak policy.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ isis:DomAf Per address family IS-IS VRF information.        ├ isis:DomLvl The IS-IS Domain level VRF information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ isis:Db The IS-IS database information.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ health:Inst A base class for a health score instance.(Switch only)            ├ isis:DTEp The discovered IP security (IPsec) endpoints. The deployment of IPsec with Internet Key Exchange (IKE) requires the configuration of a crypto map for every peer which identifies the endpoint to which a secure tunnel is to be established.            ├ isis:GrpRec The database of fabric multicast group elements.              ├ isis:BdIdRec The IS-IS multicast address family feature provides support for multiple logical topologies over a single physical network. This object contains bridge domain records active for this multicast group element.              ├ isis:FtagOifRec Per-forwarding tag (FTAG) OIF list record.                ├ isis:OifListLeaf The outgoing interface list on the leaf switch.                ├ isis:OifListSpine The outgoing interface list on the spine switch.              ├ isis:NodeIdRec The fabric nodes active for this multicast group element.              ├ isis:OifListLeaf The outgoing interface list on the leaf switch.              ├ isis:OifListSpine The outgoing interface list on the spine switch.            ├ isis:LspRec The link state packet information records lists the device's neighbors and prefix reachability information.              ├ isis:ExtIsRec The extended IS record.              ├ isis:IpRec The IP Prefix record.              ├ isis:TlvRec The generic Type Length Value (TLV) record.            ├ isis:Nexthop The IS-IS next hop.              ├ isis:RtNhAtt A target relation to the IS-IS next hop.            ├ isis:NodeRec The node records.              ├ isis:GrpIdRec The multicast groups identifier record.            ├ isis:Route An ISIS route is a managed object that captures the routing information learned through ISIS protocol.              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ health:Inst A base class for a health score instance.(Switch only)              ├ isis:RsNhAtt A source relation to the list of next hopss                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.                ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                  ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                  ├ tag:Annotation                   ├ tag:Tag                 ├ health:Inst A base class for a health score instance.(Switch only)                ├ tag:Annotation                 ├ tag:Tag           ├ isis:LspGen The LSP generation interval controls.          ├ isis:RtSum This object holds summarization address. Any address that maps to this prefix will be summarized through this address            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ isis:SpfComp The shortest path first (SPF) computation frequency controls.        ├ isis:ExtIf  This object holds isis information that is operated at a interface level, specific to external interfaces          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ nw:RtPathToIf A target relation to the interface information.        ├ isis:FmcastTree The ISIS Fabric Multicast(ftag) tree element is a manged object that captures ISIS fabric-wide multicast tree membership information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ isis:NodeIdRec The fabric nodes active for this multicast group element.          ├ isis:OifListLeaf The outgoing interface list on the leaf switch.          ├ isis:OifListSpine The outgoing interface list on the spine switch.        ├ isis:Gr Per- graceful restart information.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ isis:If The ISIS interface holds ISIS information that is operated at an interface level.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ isis:AdjEp The ISIS adjacency neighbor endpoint is a managed object that captures ISIS adjacency specific information such as peer system identifier and peer circuit identifier.            ├ isis:PeerIpAddr The peer IP address is the IP address of the other end of the tunnel. From the client PC, the peer IP address would be the IP address of the router.          ├ isis:IfLvl The IS-IS interface level properties. These properties control how the IS-IS protocol operates. For example, you can configure the interval for sending the Hello and CSNP packets.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ isis:IfTraffic Per-interface state information.          ├ isis:MeshGrp The mesh group information per interface.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ nw:RtPathToIf A target relation to the interface information.        ├ isis:InterLeakP The inter protocol route leak policy defines distribution of routes from other protocols to IS-IS.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ isis:IntraLeakP Intra protocol leak policy defines distribution of routes from one level to another.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ isis:LeakCtrlP The leak controls related to the number of routes leaked.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ isis:Overload IS-IS overload information.        ├ isis:RibLeakP   ├ l1:PhysIf The object that represents the Layer 1 physical Ethernet interface information object.    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ eltm:PhysIf     ├ ethpm:PhysIf Physical interface information holder      ├ ethpm:DOMStats  Digital Optical Monitor details        ├ ethpm:DOMCurrentStats  Dynamic Current Information per port info        ├ ethpm:DOMRxPwrStats  Dynamic Rx Power Information per port info          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ ethpm:DOMTempStats  Temperature Dynamic per port info        ├ ethpm:DOMTxPwrStats  Dynamic Tx Power Information per port info          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ ethpm:DOMVoltStats  Dynamic Voltage Information per port info        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ ethpm:Fault         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ ethpm:Fcot Class for regular Fibre Channel optical transmitter types.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ ethpm:FcotDD  This is the class for DD fcot types.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ ethpm:FcotX2 The class for X2 Fibre Channel optical transmitter types.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ ethpm:PortCap Port runtime capabilities, for example maximum speed.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fv:DomDef The domain information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fv:RsDomDefNs A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsDomDefNsLocal A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fv:RtToDomDef A target relation to the domain definition. This is an internal object.      ├ fv:RtToFvDomDef       ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:EeeP An energy efficient Ethernet policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l1:LoadP A load interval policy.    ├ l1:PrioFlowCtrlP  MO for slow-drain policy and PFC mode. This is a child policy of if.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RsAttEntityPCons     ├ l1:RsCdpIfPolCons A source relation to CDP interface policy parameters. Note that this relation is an internal object.    ├ l1:RsCeMonitorPolCons     ├ l1:RsCoppIfPolCons  Relationship with the coppIf policy consumed by this physical interface    ├ l1:RsDwdmFabIfPolCons     ├ l1:RsDwdmIfPolCons     ├ l1:RsFIfPolCons  Relationship with the FIfPol policy consumed by this physical interface    ├ l1:RsFcIfPolCons  Relationship with the fcIfPol policy consumed by this physical interface    ├ l1:RsHIfPolCons A source relation to the host interface policy. Note that this relation is an internal object.    ├ l1:RsIpv4MonitorPolCons  Relationship with the Monitor policy consumed by this physical interface    ├ l1:RsIpv6MonitorPolCons     ├ l1:RsL2IfPolCons     ├ l1:RsL2PortAuthCons  Relationship with the Port Authentication policy consumed by this physical interface    ├ l1:RsL2PortSecurityCons  Relationship with the Port Security policy consumed by this physical interface    ├ l1:RsL3IfPolCons  Relationship with the L3 interface policy consumed by this physical interface    ├ l1:RsLacpIfPolCons A source relation to the port-Level LACP member policy. Note that this relation is an internal object.    ├ l1:RsLinkFlapPolCons     ├ l1:RsLldpIfPolCons A source relation to the LLDP policy parameters for the interface. Note that this relation is an internal object.    ├ l1:RsMacsecFabPolCons     ├ l1:RsMacsecPolCons  Relationship with the cdp/lacp/lldp if policy consumed by this physical interface    ├ l1:RsMcpIfPolCons     ├ l1:RsMonPolIfPolCons A source relation to the base monitoring policy model. Note that this relation is an internal object.    ├ l1:RsPoeIfPolCons  Relationship with the poe policy consumed by this physical interface    ├ l1:RsQosEgressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Egress    ├ l1:RsQosIngressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Ingress    ├ l1:RsQosPfcIfPolCons  Relationship with the qosPfcPol policy consumed by this physical interface    ├ l1:RsQosSdIfPolCons  Relationship with the SdIfPol policy consumed by this physical interface    ├ l1:RsStormctrlIfPolCons     ├ l1:RsStpIfPolCons A source relation to the Spanning-Tree Protocol (STP) policy. Note that this relation is an internal object.    ├ l1:RtBrConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtEncPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RtEthIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtExtConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtInbandConf A target relation to the Layer 1 physical Ethernet interface information. Note that this relation is an internal object.    ├ l1:RtIoPPhysConf A target relation to the Layer 1 physical Ethernet interface information. Note that this relation is an internal object.    ├ l1:RtLabelEpToAllowedEthIf  Associations to the allowed interfaces for the label    ├ l1:RtLabelEpToConsumerEthIf  Associations to the interfaces consuming the label    ├ l1:RtLsNodeToIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtMbrIfs A target relation to the Layer 1 physical Ethernet interface information. Note that this relation is an internal object.    ├ l1:RtNodePortAtt A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtPhysIf A target relation to the Layer 1 physical Ethernet interface information. Note that this relation is an internal object.    ├ l1:RtPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.    ├ l1:RtToObservedEthIf     ├ l1:RtTunnelMbrIfs A target relation to the Layer 1 physical Ethernet interface information. Note that this relation is an internal object.    ├ l1:StormCtrlP       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ nfm:PhysIf     ├ nw:RtPathToIf A target relation to the interface information.    ├ pc:AggrMbrIf AggrMbrIf class      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ rmon:Dot1d The Dot1d statistics.    ├ rmon:Dot3Stats The Dot3 statistics.    ├ rmon:EgrCounters  Interface egress Drop counters    ├ rmon:EtherStats The Ethernet statistics.    ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters    ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters    ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters    ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters    ├ rmon:IfHCIn The interface high capacity input statistics.    ├ rmon:IfHCOut The interface high capacity output statistics.    ├ rmon:IfIn The interface input statistics.    ├ rmon:IfMacsecrx  Interface Macsec Rx counters    ├ rmon:IfMacsectx  Interface Macsec Tx counters    ├ rmon:IfOut The interface output statistics.    ├ rmon:IfStorm     ├ rmon:IngrCounters  Ingress counters    ├ rmon:IpIn The IPV4 input statistics.    ├ rmon:Ipv6IfStats The IPV6 interface statistics.  ├ l1cap:Prov An L1 capability provider that consumes a capability rule and tracks the software or hardware capabilities of the system. For example, this property provides you total and remaining count on the leaf.  ├ l2:BrIf The L2 bridged interface.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fv:DEp A dynamically-learned endpoint on the switch.      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.    ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.      ├ fv:RsLNode A source relation to the logical node. This is an internal object.      ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.      ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.      ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsBrConf A source relation to an L1 interface.    ├ nw:RtPathToIf A target relation to the interface information.    ├ opflex:IDEp This is generated and used only by internal processes.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:IDEpToEpDefRef  IDEpToEpDefRef represents an object that links IDEp to corresponding EpDef      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.      ├ fv:VDEp A virtual datacenter endpoint.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.          ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToNic           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToVm           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.        ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.        ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:EncapCont         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ opflex:PathAtt           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fv:VDEp A virtual datacenter endpoint.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.              ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToNic               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToVm               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.            ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.            ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.            ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpCntr This is generated and used only by internal processes.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:IDEpEpPDRef  EpPD ref under the IDEp      ├ opflex:IDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpLabel       ├ opflex:IDEpScopeCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ opflex:IDEpScope           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:Ip  Represents IP address        ├ opflexp:L3EpIDEpRef  Hack to inform opflexElem to clean up the IP from IDEp      ├ opflex:PathAtt         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fv:VDEp A virtual datacenter endpoint.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.            ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToNic             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToVm             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.          ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.          ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:RsHpp       ├ opflex:RtIDEp       ├ opflex:RtODevToIDEp       ├ opflex:RtODevToTunnelIDEp       ├ opflexp:AgentIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)    ├ opflex:ODev This is generated and used only by internal processes.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:HvNic  MO used to pass the HV/SVM Mac to Ctrlr for AVE and AVS        ├ fv:RsHvNicToCtrlr  Relation to the controller in the IFC to pull the contents down to the leaf        ├ fv:RsHvNicToLocale       ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.        ├ fv:RsLNode A source relation to the logical node. This is an internal object.        ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.        ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.        ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:ODevCap This is generated and used only by internal processes.      ├ opflex:ODevCliCmdCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ODevCliCmdSession           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ opflex:ODevCliCmdReq             ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ opflex:ODevCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ opflexp:AveCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ tag:Annotation             ├ tag:Tag           ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:ODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:OPNic         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ONic           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:OVm         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:RsODevToIDEp       ├ opflex:RsODevToTunnelIDEp       ├ opflex:RtTsODev  Relation to source fabric node      ├ opflexp:AgentODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag   ├ l2:ExtIf The FEX fabric interface.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fv:DEp A dynamically-learned endpoint on the switch.      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.    ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.      ├ fv:RsLNode A source relation to the logical node. This is an internal object.      ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.      ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.      ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsExtConf A source relation to an L1 interface. This is an internal object    ├ nw:RtPathToIf A target relation to the interface information.    ├ opflex:IDEp This is generated and used only by internal processes.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:IDEpToEpDefRef  IDEpToEpDefRef represents an object that links IDEp to corresponding EpDef      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.      ├ fv:VDEp A virtual datacenter endpoint.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.          ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToNic           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToVm           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.        ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.        ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:EncapCont         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ opflex:PathAtt           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fv:VDEp A virtual datacenter endpoint.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.              ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToNic               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToVm               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.            ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.            ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.            ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpCntr This is generated and used only by internal processes.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:IDEpEpPDRef  EpPD ref under the IDEp      ├ opflex:IDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpLabel       ├ opflex:IDEpScopeCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ opflex:IDEpScope           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:Ip  Represents IP address        ├ opflexp:L3EpIDEpRef  Hack to inform opflexElem to clean up the IP from IDEp      ├ opflex:PathAtt         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fv:VDEp A virtual datacenter endpoint.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.            ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToNic             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToVm             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.          ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.          ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:RsHpp       ├ opflex:RtIDEp       ├ opflex:RtODevToIDEp       ├ opflex:RtODevToTunnelIDEp       ├ opflexp:AgentIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)    ├ opflex:ODev This is generated and used only by internal processes.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:HvNic  MO used to pass the HV/SVM Mac to Ctrlr for AVE and AVS        ├ fv:RsHvNicToCtrlr  Relation to the controller in the IFC to pull the contents down to the leaf        ├ fv:RsHvNicToLocale       ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.        ├ fv:RsLNode A source relation to the logical node. This is an internal object.        ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.        ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.        ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:ODevCap This is generated and used only by internal processes.      ├ opflex:ODevCliCmdCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ODevCliCmdSession           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ opflex:ODevCliCmdReq             ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ opflex:ODevCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ opflexp:AveCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ tag:Annotation             ├ tag:Tag           ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:ODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:OPNic         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ONic           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:OVm         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:RsODevToIDEp       ├ opflex:RsODevToTunnelIDEp       ├ opflex:RtTsODev  Relation to source fabric node      ├ opflexp:AgentODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag   ├ l2:InbandIf The in-band interface.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fv:DEp A dynamically-learned endpoint on the switch.      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.    ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.      ├ fv:RsLNode A source relation to the logical node. This is an internal object.      ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.      ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.      ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsInbandConf A source relation to an L1 Ethernet interface. This is an internal object.    ├ nw:RtPathToIf A target relation to the interface information.    ├ opflex:IDEp This is generated and used only by internal processes.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:IDEpToEpDefRef  IDEpToEpDefRef represents an object that links IDEp to corresponding EpDef      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.      ├ fv:VDEp A virtual datacenter endpoint.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.          ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToNic           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToVm           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.        ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.        ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:EncapCont         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ opflex:PathAtt           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fv:VDEp A virtual datacenter endpoint.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.              ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToNic               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToVm               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.            ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.            ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.            ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpCntr This is generated and used only by internal processes.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:IDEpEpPDRef  EpPD ref under the IDEp      ├ opflex:IDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpLabel       ├ opflex:IDEpScopeCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ opflex:IDEpScope           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:Ip  Represents IP address        ├ opflexp:L3EpIDEpRef  Hack to inform opflexElem to clean up the IP from IDEp      ├ opflex:PathAtt         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fv:VDEp A virtual datacenter endpoint.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.            ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToNic             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToVm             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.          ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.          ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:RsHpp       ├ opflex:RtIDEp       ├ opflex:RtODevToIDEp       ├ opflex:RtODevToTunnelIDEp       ├ opflexp:AgentIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)    ├ opflex:ODev This is generated and used only by internal processes.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:HvNic  MO used to pass the HV/SVM Mac to Ctrlr for AVE and AVS        ├ fv:RsHvNicToCtrlr  Relation to the controller in the IFC to pull the contents down to the leaf        ├ fv:RsHvNicToLocale       ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.        ├ fv:RsLNode A source relation to the logical node. This is an internal object.        ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.        ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.        ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:ODevCap This is generated and used only by internal processes.      ├ opflex:ODevCliCmdCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ODevCliCmdSession           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ opflex:ODevCliCmdReq             ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ opflex:ODevCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ opflexp:AveCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ tag:Annotation             ├ tag:Tag           ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:ODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:OPNic         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ONic           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:OVm         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:RsODevToIDEp       ├ opflex:RsODevToTunnelIDEp       ├ opflex:RtTsODev  Relation to source fabric node      ├ opflexp:AgentODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag   ├ l2cap:Prov An L1 capability provider that consumes a capability rule and tracks the software or hardware capabilities of the system. For example, this property provides you total and remaining count on the leaf.  ├ l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.    ├ actrl:PfxEntry The prefix list entry definition.      ├ actrl:PfxEntryConsumerCount  Remote and local consumer count for pfxentry      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ ip:Cons Used for maintaining consumers of a static route from an IPRoueDef.        ├ ip:RsConsRoot     ├ epm:Db       ├ epm:AnycastIpEp  IP Anycast record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DTEp  Tunnel endpoints discovered through epm      ├ epm:IpEp         ├ epm:RtMacEpToIpEpAtt       ├ epm:MacEp         ├ epm:RsMacEpToIpEpAtt         ├ tag:Annotation       ├ epm:MacEpFault  Mac Ep Fault record      ├ epm:RogueIpEp  IP Rogue record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:RogueMacEp         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:SviIpEp  SVI IP record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ epm:DynUsegPolicyTrig  MO to trigger Dynamic policy pull for Vrf based Useg    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fmcast:Grp A multicast group entity.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.      ├ epm:Db         ├ epm:AnycastIpEp  IP Anycast record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DTEp  Tunnel endpoints discovered through epm        ├ epm:IpEp           ├ epm:RtMacEpToIpEpAtt         ├ epm:MacEp           ├ epm:RsMacEpToIpEpAtt           ├ tag:Annotation         ├ epm:MacEpFault  Mac Ep Fault record        ├ epm:RogueIpEp  IP Rogue record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:RogueMacEp           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:SviIpEp  SVI IP record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DynEpgPolicyTrig       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fmcast:Grp A multicast group entity.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:AnchorBD       ├ l2:CfgMacEp  Config Mac end point (Anycast MAC)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:L2AnycastEP           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:EpCtrl       ├ l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:EpScanInfo       ├ l2:MacCktEp  Mac EP policy        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:MacCktCons           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:RsMacBaseEppAtt         ├ l2:RsMacEppAtt         ├ tag:Annotation         ├ tag:Tag       ├ l2:MpBd  Layer2 Bridge-domain more properties used in multipod case Not added to BD mo because in single pod case these new added properties are not used.      ├ l2:RsExtBD A source relation to the interface connectivity. This is an internal object.      ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:LPort The holder of nxosmock-specific information of the port.        ├ l2:PortSecurityPolDef  Port Security Policy          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.      ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.      ├ l3:IpCktEp  IP Circuit Endpoint        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsIpEppAtt         ├ l3:RtIpCktEpIfConn  IP correspojding to this IfConn        ├ tag:Annotation         ├ tag:Tag       ├ l3:StaticRouteIpEp  Static Route IP end point        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ qinq:CktEp  802.1q Vlan        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:MacEp A static Mac endpoint.          ├ l2:RtEpDefRefToL2MacEp         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ qinq:RsQinqEppAtt       ├ svi:If A routed VLAN interface.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsL3If The source of the sub-interface/l3-interface.        ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.        ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out        ├ l3:RtSrcToL3OutAtt  Relation to the L3 out        ├ nw:RtPathToIf A target relation to the interface information.        ├ rmon:Dot1d The Dot1d statistics.        ├ rmon:Dot3Stats The Dot3 statistics.        ├ rmon:EgrCounters  Interface egress Drop counters        ├ rmon:EtherStats The Ethernet statistics.        ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters        ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters        ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters        ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters        ├ rmon:IfFcmac  fcmac interface In Out statistics counters        ├ rmon:IfHCIn The interface high capacity input statistics.        ├ rmon:IfHCOut The interface high capacity output statistics.        ├ rmon:IfIn The interface input statistics.        ├ rmon:IfMacsecrx  Interface Macsec Rx counters        ├ rmon:IfMacsectx  Interface Macsec Tx counters        ├ rmon:IfOut The interface output statistics.        ├ rmon:IfStorm         ├ rmon:IngrCounters  Ingress counters        ├ rmon:IpIn The IPV4 input statistics.        ├ rmon:Ipv6IfStats The IPV6 interface statistics.      ├ vlan:CktEp A VLAN object created for an endpoint group with an 802.1q encap.        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:MacEp A static Mac endpoint.          ├ l2:RtEpDefRefToL2MacEp         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ vlan:RsVlanEppAtt A source relation to an abstract representation of the resolvable endpoint profile.        ├ vlan:RtSrcEncap A target relation to the VLAN object created for an endpoint group with an 802.1q encap.        ├ vlan:RtToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD      ├ vsan:CktEp  Vsan represents a generic CktEp        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ vsan:RsVsanLabelAtt  Associations to nw:LabelEp with rel-mo to vfcif "        ├ vsan:RsVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ vxlan:CktEp A VXLAN circuit.        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ vxlan:RsVxlanEppAtt A source relation to an abstract representation of a resolvable endpoint profile.    ├ l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l2:MacCktRef  Mac EP reference      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l3:CtxExtn  Tenant context extension in a Multi pod case      ├ l2:BDExtn  Layer2 Bridge-domain extension in a different pod        ├ qinq:CktEpExtn  802.1q Vlan cirucuit endpoint extension        ├ vlan:CktEpExtn  802.1q Vlan cirucuit endpoint extension        ├ vxlan:CktEpExtn  802.1q Vxlan cirucuit endpoint extension    ├ l3:EncRtdIf The routed interface corresponds to a sub-interface in Cisco?s routing terminology. A sub-interface is a logical L3 interface created on an underlying physical L3 port (the parent interface). Each sub-interface is associated with an 802.1Q VLAN tag. The traffic that comes on the parent interface with that tag is considered for that sub-interface. The existence of a routed interface under a VRF or infra VRF also implies that the interface belo...      ├ ethpm:EncRtdIf Subinterface information holder      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsEncPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.      ├ rmon:Dot1d The Dot1d statistics.      ├ rmon:Dot3Stats The Dot3 statistics.      ├ rmon:EgrCounters  Interface egress Drop counters      ├ rmon:EtherStats The Ethernet statistics.      ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters      ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters      ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters      ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters      ├ rmon:IfFcmac  fcmac interface In Out statistics counters      ├ rmon:IfHCIn The interface high capacity input statistics.      ├ rmon:IfHCOut The interface high capacity output statistics.      ├ rmon:IfIn The interface input statistics.      ├ rmon:IfMacsecrx  Interface Macsec Rx counters      ├ rmon:IfMacsectx  Interface Macsec Tx counters      ├ rmon:IfOut The interface output statistics.      ├ rmon:IfStorm       ├ rmon:IngrCounters  Ingress counters      ├ rmon:IpIn The IPV4 input statistics.      ├ rmon:Ipv6IfStats The IPV6 interface statistics.    ├ l3:FwdCtx       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3:IpEp  Static IP end point      ├ l3:Cons  Represents a consumer of a resource.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l3:LbRtdIf The routed loopback interface.      ├ eltm:LbIf       ├ ethpm:LbRtdIf Loopback interface information holder      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsIntersiteLbIfToOutRef       ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsLbIfToLocale A loopback created for the router ID. This relation is un-enforced because the code tries to access the real-time monitoring tool.        ├ l3:Cons  Represents a consumer of a resource.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l3:RsLbIfToOutRef       ├ l3:RsLbIfToStaticRP       ├ l3:RsProtLbIf A loopback created for protection groups.      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.    ├ l3:RsCtxToEpP A source relation to an abstract representation of the resolvable endpoint profile. This is an internal object.    ├ l3:RsEgressMplsRuleAtt  Relation to Egress MPLS rules    ├ l3:RsIngressMplsRuleAtt  Relation to Ingress MPLS rules    ├ l3:RtEPgDefToL3Dom A target relation to the layer 3 domain (VRF).    ├ l3:RtTenConn A target relation to the tenant context. This is an internal object.    ├ l3:RtToInbL3Dom     ├ l3:RtToL3Dom     ├ l3:RtUserCtx A target relation to tenant context information. The tenant context is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.    ├ l3:RtdIf A target relation to the routed concrete interface. This corresponds to a physical L3 interface. The existence of a routed concrete interface under a VRF or infra VRF also implies that interface belongs to that VRF. An L3 interface can belong to only one VRF at a time.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.    ├ l3:SecIpCktEp  Secure IP Circuit Endpoint      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l3:RsIpESgEpPAtt       ├ tag:Annotation       ├ tag:Tag     ├ l3:StaticRtIpEp  Static Route IP end point      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ mgmt:RtdMgmtIf Routed management interface      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ mgmt:RsRtdMgmtConf A source relation to the management interface.      ├ nw:RtPathToIf A target relation to the interface information.    ├ svccopy:SvcDb  Abstraction of copy service database      ├ svccopy:DTEp  Tunnel endpoints learnt through svc dest  ├ l3:CtxSubstitute  Tenant context object substitute. Its needed for internal PE purposes but it doesnt instantiate any VRF in the node.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.      ├ epm:Db         ├ epm:AnycastIpEp  IP Anycast record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DTEp  Tunnel endpoints discovered through epm        ├ epm:IpEp           ├ epm:RtMacEpToIpEpAtt         ├ epm:MacEp           ├ epm:RsMacEpToIpEpAtt           ├ tag:Annotation         ├ epm:MacEpFault  Mac Ep Fault record        ├ epm:RogueIpEp  IP Rogue record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:RogueMacEp           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:SviIpEp  SVI IP record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DynEpgPolicyTrig       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fmcast:Grp A multicast group entity.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:AnchorBD       ├ l2:CfgMacEp  Config Mac end point (Anycast MAC)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:L2AnycastEP           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:EpCtrl       ├ l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:EpScanInfo       ├ l2:MacCktEp  Mac EP policy        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:MacCktCons           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:RsMacBaseEppAtt         ├ l2:RsMacEppAtt         ├ tag:Annotation         ├ tag:Tag       ├ l2:MpBd  Layer2 Bridge-domain more properties used in multipod case Not added to BD mo because in single pod case these new added properties are not used.      ├ l2:RsExtBD A source relation to the interface connectivity. This is an internal object.      ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:LPort The holder of nxosmock-specific information of the port.        ├ l2:PortSecurityPolDef  Port Security Policy          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.      ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.      ├ l3:IpCktEp  IP Circuit Endpoint        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsIpEppAtt         ├ l3:RtIpCktEpIfConn  IP correspojding to this IfConn        ├ tag:Annotation         ├ tag:Tag       ├ l3:StaticRouteIpEp  Static Route IP end point        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ qinq:CktEp  802.1q Vlan        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:MacEp A static Mac endpoint.          ├ l2:RtEpDefRefToL2MacEp         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ qinq:RsQinqEppAtt       ├ svi:If A routed VLAN interface.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsL3If The source of the sub-interface/l3-interface.        ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.        ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out        ├ l3:RtSrcToL3OutAtt  Relation to the L3 out        ├ nw:RtPathToIf A target relation to the interface information.        ├ rmon:Dot1d The Dot1d statistics.        ├ rmon:Dot3Stats The Dot3 statistics.        ├ rmon:EgrCounters  Interface egress Drop counters        ├ rmon:EtherStats The Ethernet statistics.        ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters        ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters        ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters        ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters        ├ rmon:IfFcmac  fcmac interface In Out statistics counters        ├ rmon:IfHCIn The interface high capacity input statistics.        ├ rmon:IfHCOut The interface high capacity output statistics.        ├ rmon:IfIn The interface input statistics.        ├ rmon:IfMacsecrx  Interface Macsec Rx counters        ├ rmon:IfMacsectx  Interface Macsec Tx counters        ├ rmon:IfOut The interface output statistics.        ├ rmon:IfStorm         ├ rmon:IngrCounters  Ingress counters        ├ rmon:IpIn The IPV4 input statistics.        ├ rmon:Ipv6IfStats The IPV6 interface statistics.      ├ vlan:CktEp A VLAN object created for an endpoint group with an 802.1q encap.        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:MacEp A static Mac endpoint.          ├ l2:RtEpDefRefToL2MacEp         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ vlan:RsVlanEppAtt A source relation to an abstract representation of the resolvable endpoint profile.        ├ vlan:RtSrcEncap A target relation to the VLAN object created for an endpoint group with an 802.1q encap.        ├ vlan:RtToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD      ├ vsan:CktEp  Vsan represents a generic CktEp        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ vsan:RsVsanLabelAtt  Associations to nw:LabelEp with rel-mo to vfcif "        ├ vsan:RsVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ vxlan:CktEp A VXLAN circuit.        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ vxlan:RsVxlanEppAtt A source relation to an abstract representation of a resolvable endpoint profile.    ├ l2:MacCktRef  Mac EP reference      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l3:EncRtdIf The routed interface corresponds to a sub-interface in Cisco?s routing terminology. A sub-interface is a logical L3 interface created on an underlying physical L3 port (the parent interface). Each sub-interface is associated with an 802.1Q VLAN tag. The traffic that comes on the parent interface with that tag is considered for that sub-interface. The existence of a routed interface under a VRF or infra VRF also implies that the interface belo...      ├ ethpm:EncRtdIf Subinterface information holder      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsEncPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.      ├ rmon:Dot1d The Dot1d statistics.      ├ rmon:Dot3Stats The Dot3 statistics.      ├ rmon:EgrCounters  Interface egress Drop counters      ├ rmon:EtherStats The Ethernet statistics.      ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters      ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters      ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters      ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters      ├ rmon:IfFcmac  fcmac interface In Out statistics counters      ├ rmon:IfHCIn The interface high capacity input statistics.      ├ rmon:IfHCOut The interface high capacity output statistics.      ├ rmon:IfIn The interface input statistics.      ├ rmon:IfMacsecrx  Interface Macsec Rx counters      ├ rmon:IfMacsectx  Interface Macsec Tx counters      ├ rmon:IfOut The interface output statistics.      ├ rmon:IfStorm       ├ rmon:IngrCounters  Ingress counters      ├ rmon:IpIn The IPV4 input statistics.      ├ rmon:Ipv6IfStats The IPV6 interface statistics.    ├ l3:LbRtdIf The routed loopback interface.      ├ eltm:LbIf       ├ ethpm:LbRtdIf Loopback interface information holder      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsIntersiteLbIfToOutRef       ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsLbIfToLocale A loopback created for the router ID. This relation is un-enforced because the code tries to access the real-time monitoring tool.        ├ l3:Cons  Represents a consumer of a resource.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l3:RsLbIfToOutRef       ├ l3:RsLbIfToStaticRP       ├ l3:RsProtLbIf A loopback created for protection groups.      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.    ├ l3:RtEPgDefToL3Dom A target relation to the layer 3 domain (VRF).    ├ l3:RtToInbL3Dom     ├ l3:RtToL3Dom     ├ l3:RtdIf A target relation to the routed concrete interface. This corresponds to a physical L3 interface. The existence of a routed concrete interface under a VRF or infra VRF also implies that interface belongs to that VRF. An L3 interface can belong to only one VRF at a time.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.    ├ mgmt:RtdMgmtIf Routed management interface      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ mgmt:RsRtdMgmtConf A source relation to the management interface.      ├ nw:RtPathToIf A target relation to the interface information.  ├ l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.    ├ dci:LocalSite  local Site      ├ l3:LocalCtxSubstitute  multisite l3 local context        ├ dci:CreatedBy           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:LocalBdSubstitute  Multisite local bd/Pctag          ├ dci:CreatedBy             ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:RtToLocalBdSubstitute         ├ l2:LocalPcTagSubstitute           ├ dci:CreatedBy             ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:RtToLocalPcTagSubstitute         ├ l3:RtToLocalCtxSubstitute     ├ dci:RemoteSite  Remote Site      ├ dci:AnycastExtn  multipod under remote site      ├ l3:RemoteCtxSubstitute  multisite l3 remote context        ├ dci:CreatedBy           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:RemoteBdSubstitute  Multisite Remote bd/Pctag          ├ dci:CreatedBy             ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:RsToLocalBdSubstitute         ├ l2:RemotePcTagSubstitute           ├ dci:CreatedBy             ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:RsToLocalPcTagSubstitute         ├ l3:RsToLocalCtxSubstitute     ├ epm:Db       ├ epm:AnycastIpEp  IP Anycast record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DTEp  Tunnel endpoints discovered through epm      ├ epm:IpEp         ├ epm:RtMacEpToIpEpAtt       ├ epm:MacEp         ├ epm:RsMacEpToIpEpAtt         ├ tag:Annotation       ├ epm:MacEpFault  Mac Ep Fault record      ├ epm:RogueIpEp  IP Rogue record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:RogueMacEp         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:SviIpEp  SVI IP record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fmcast:Tree A distribution tree used to forward multi-destination (flood and Multicast) traffic over the fabric.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.      ├ epm:Db         ├ epm:AnycastIpEp  IP Anycast record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DTEp  Tunnel endpoints discovered through epm        ├ epm:IpEp           ├ epm:RtMacEpToIpEpAtt         ├ epm:MacEp           ├ epm:RsMacEpToIpEpAtt           ├ tag:Annotation         ├ epm:MacEpFault  Mac Ep Fault record        ├ epm:RogueIpEp  IP Rogue record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:RogueMacEp           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:SviIpEp  SVI IP record          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DynEpgPolicyTrig       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fmcast:Grp A multicast group entity.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:AnchorBD       ├ l2:CfgMacEp  Config Mac end point (Anycast MAC)        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:L2AnycastEP           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:EpCtrl       ├ l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:EpScanInfo       ├ l2:MacCktEp  Mac EP policy        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:MacCktCons           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:RsMacBaseEppAtt         ├ l2:RsMacEppAtt         ├ tag:Annotation         ├ tag:Tag       ├ l2:MpBd  Layer2 Bridge-domain more properties used in multipod case Not added to BD mo because in single pod case these new added properties are not used.      ├ l2:RsExtBD A source relation to the interface connectivity. This is an internal object.      ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l2:LPort The holder of nxosmock-specific information of the port.        ├ l2:PortSecurityPolDef  Port Security Policy          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.      ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.      ├ l3:IpCktEp  IP Circuit Endpoint        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsIpEppAtt         ├ l3:RtIpCktEpIfConn  IP correspojding to this IfConn        ├ tag:Annotation         ├ tag:Tag       ├ l3:StaticRouteIpEp  Static Route IP end point        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag       ├ qinq:CktEp  802.1q Vlan        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:MacEp A static Mac endpoint.          ├ l2:RtEpDefRefToL2MacEp         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ qinq:RsQinqEppAtt       ├ svi:If A routed VLAN interface.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsL3If The source of the sub-interface/l3-interface.        ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.        ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out        ├ l3:RtSrcToL3OutAtt  Relation to the L3 out        ├ nw:RtPathToIf A target relation to the interface information.        ├ rmon:Dot1d The Dot1d statistics.        ├ rmon:Dot3Stats The Dot3 statistics.        ├ rmon:EgrCounters  Interface egress Drop counters        ├ rmon:EtherStats The Ethernet statistics.        ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters        ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters        ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters        ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters        ├ rmon:IfFcmac  fcmac interface In Out statistics counters        ├ rmon:IfHCIn The interface high capacity input statistics.        ├ rmon:IfHCOut The interface high capacity output statistics.        ├ rmon:IfIn The interface input statistics.        ├ rmon:IfMacsecrx  Interface Macsec Rx counters        ├ rmon:IfMacsectx  Interface Macsec Tx counters        ├ rmon:IfOut The interface output statistics.        ├ rmon:IfStorm         ├ rmon:IngrCounters  Ingress counters        ├ rmon:IpIn The IPV4 input statistics.        ├ rmon:Ipv6IfStats The IPV6 interface statistics.      ├ vlan:CktEp A VLAN object created for an endpoint group with an 802.1q encap.        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:MacEp A static Mac endpoint.          ├ l2:RtEpDefRefToL2MacEp         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ vlan:RsVlanEppAtt A source relation to an abstract representation of the resolvable endpoint profile.        ├ vlan:RtSrcEncap A target relation to the VLAN object created for an endpoint group with an 802.1q encap.        ├ vlan:RtToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD      ├ vsan:CktEp  Vsan represents a generic CktEp        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ vsan:RsVsanLabelAtt  Associations to nw:LabelEp with rel-mo to vfcif "        ├ vsan:RsVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ vxlan:CktEp A VXLAN circuit.        ├ epm:Db           ├ epm:AnycastIpEp  IP Anycast record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:DTEp  Tunnel endpoints discovered through epm          ├ epm:IpEp             ├ epm:RtMacEpToIpEpAtt           ├ epm:MacEp             ├ epm:RsMacEpToIpEpAtt             ├ tag:Annotation           ├ epm:MacEpFault  Mac Ep Fault record          ├ epm:RogueIpEp  IP Rogue record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:RogueMacEp             ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ epm:SviIpEp  SVI IP record            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ epm:DynEpgPolicyTrig         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:EpScanInfo         ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ l2:LPort The holder of nxosmock-specific information of the port.          ├ l2:PortSecurityPolDef  Port Security Policy            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.        ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.        ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.        ├ vxlan:RsVxlanEppAtt A source relation to an abstract representation of a resolvable endpoint profile.    ├ l2:MacCktRef  Mac EP reference      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l3:EncRtdIf The routed interface corresponds to a sub-interface in Cisco?s routing terminology. A sub-interface is a logical L3 interface created on an underlying physical L3 port (the parent interface). Each sub-interface is associated with an 802.1Q VLAN tag. The traffic that comes on the parent interface with that tag is considered for that sub-interface. The existence of a routed interface under a VRF or infra VRF also implies that the interface belo...      ├ ethpm:EncRtdIf Subinterface information holder      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsEncPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.      ├ rmon:Dot1d The Dot1d statistics.      ├ rmon:Dot3Stats The Dot3 statistics.      ├ rmon:EgrCounters  Interface egress Drop counters      ├ rmon:EtherStats The Ethernet statistics.      ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters      ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters      ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters      ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters      ├ rmon:IfFcmac  fcmac interface In Out statistics counters      ├ rmon:IfHCIn The interface high capacity input statistics.      ├ rmon:IfHCOut The interface high capacity output statistics.      ├ rmon:IfIn The interface input statistics.      ├ rmon:IfMacsecrx  Interface Macsec Rx counters      ├ rmon:IfMacsectx  Interface Macsec Tx counters      ├ rmon:IfOut The interface output statistics.      ├ rmon:IfStorm       ├ rmon:IngrCounters  Ingress counters      ├ rmon:IpIn The IPV4 input statistics.      ├ rmon:Ipv6IfStats The IPV6 interface statistics.    ├ l3:LbRtdIf The routed loopback interface.      ├ eltm:LbIf       ├ ethpm:LbRtdIf Loopback interface information holder      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsIntersiteLbIfToOutRef       ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsLbIfToLocale A loopback created for the router ID. This relation is un-enforced because the code tries to access the real-time monitoring tool.        ├ l3:Cons  Represents a consumer of a resource.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l3:RsLbIfToOutRef       ├ l3:RsLbIfToStaticRP       ├ l3:RsProtLbIf A loopback created for protection groups.      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.    ├ l3:RtEPgDefToL3Dom A target relation to the layer 3 domain (VRF).    ├ l3:RtToInbL3Dom     ├ l3:RtToL3Dom     ├ l3:RtdIf A target relation to the routed concrete interface. This corresponds to a physical L3 interface. The existence of a routed concrete interface under a VRF or infra VRF also implies that interface belongs to that VRF. An L3 interface can belong to only one VRF at a time.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsPhysRtdConf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces. This is an internal object.      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ nw:RtPathToIf A target relation to the interface information.    ├ mgmt:RtdMgmtIf Routed management interface      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3If The source of the sub-interface/l3-interface.      ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.      ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out      ├ l3:RtSrcToL3OutAtt  Relation to the L3 out      ├ mgmt:RsRtdMgmtConf A source relation to the management interface.      ├ nw:RtPathToIf A target relation to the interface information.    ├ mp:PeerNodeInfo  PeerNodeInfo represents a peer node that is part of same vpod.    ├ mp:PodExtn  Multi Pod Pod Extension Container      ├ mp:AnycastExtn  Anycast Address Extension for a Pod      ├ mp:DataSubnetInfo       ├ mp:EtepExtn       ├ mp:ExtPodCpAddr       ├ mp:ExtPodSubnet         ├ mp:ExtPodMcastHrep         ├ mp:PodProxyAddress       ├ mp:McastExtn       ├ mp:RLTepAddrInfo  This object holds TEP address for RemoteLeaf information .      ├ mp:SpineTepInfo       ├ mp:UcastExtn     ├ svccopy:SvcDb  Abstraction of copy service database      ├ svccopy:DTEp  Tunnel endpoints learnt through svc dest    ├ topoctrl:ShardChP The shard chaining policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:CtrlPfxEntry  Conversational tunnels discovered matching these external prefixes are marked untrusted or trusted based on whether the sclass can be trusted or not      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:Ctx  Tunnel container for all tunnel related information for a given layer 3 domain      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ tunnel:Db  Tunnel databases      ├ tunnel:EpRetPol  End-Point retention policy identifying the duration of how long information is kept about remote end-point. This is expressed through a set of triggering and aging control parameters        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:LSite       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:NatWhitelistPool       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:PfxEntry  Tunnel prefix white list. The tunnels are formed through conversation. Only the tunnels that are part of the whitelist are allowed to form      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:RLTepPool       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:RlPodPfxEntry       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ l3cap:Prov An L1 capability provider that consumes a capability rule and tracks the software or hardware capabilities of the system. For example, this property provides you total and remaining count on the leaf.  ├ l3vm:Entity A container for the L3VM entity information.    ├ l3vm:Inst An internal object used by NX-OS processes to contain other runtime objects.      ├ l3:DomMbrIf The runtime/operational state for interfaces maintained by VRF management processes. This is an internal object that tracks the state used by the nxos process for the operations.      ├ l3vm:Ctx  This objects hold runtime information on l3vm context      ├ l3vm:Tbl An internal object used by NX-OS processes to hold runtime information on L3VM tables.  ├ lacp:Entity Holds lacp control plane entity information.    ├ lacp:Inst The LACP instance information. Only one LACP instance is currently supported.      ├ lacp:If The LACP information that is operated at an interface (member port of the port channel) level.        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ lacp:AdjEp The LACP neighbor information.        ├ lacp:IfStats Holds LACP interface statistics operational information. This is a singleton within an interface.        ├ nw:RtPathToIf A target relation to the interface information.  ├ leqpt:LooseNode An external unmanaged node.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ leqpt:RsLsAttLink An internal relation for policy resolution.    ├ leqpt:RsLsNodeToIf A source relation to an abstraction of Ethernet interface properties that are common between Ethernet physical interfaces and aggregated interfaces.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ leqpt:RtEpDefToLooseNode     ├ leqpt:RtLsNodeAtt A target relation to the external unmanaged node.    ├ leqpt:RtTunnelToLooseNode A target relation to the external unmanaged node.  ├ license:Entity     ├ license:Inst   ├ lldp:Entity LLDP allows network devices to advertise information about themselves to other devices on the network. This protocol runs over the data-link layer, which allows two systems running different network layer protocols to learn about each other.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ lldp:Inst Link Layer Discovery Protocol (LLDP) supports a set of attributes that it uses to discover neighbor devices. These attributes contain type, length, and value descriptions and are referred to as TLVs. LLDP supported devices can use TLVs to receive and send information to their neighbors. Details such as configuration information, device capabilities, and device identity can be advertised using this protocol.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ lldp:If The LLDP interface, which holds the operational states.        ├ dcbx:IfCtx  This object holds dcbx information that is operated at an interface level          ├ dcbx:IfStats  This object holds dcbx intf statistics operational information. This is a singleton within an interface        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ lldp:AdjEp The LLDP neighbors, which contains the information regarding the neighbors.          ├ dcbx:AdjCtx  This object holds lldp neighbor dcbx information            ├ dcbx:Control  Represents DCBX Control TLV            ├ dcbx:Feature  Represents DCBX Feature TLV          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ lldp:AdjStats The LLDP adjacency statistics operational information. This is a singleton within an adjacency.          ├ lldptlv:Complex A complex type, length, value (TLV).            ├ lldptlv:Ip An IP type, length, value (TLV).            ├ lldptlv:Mac A MAC type, length, value (TLV).            ├ lldptlv:Text A text type, length, value (TLV).            ├ lldptlv:UByte An 8-bit unsigned integer (UByte) type, length, value (TLV).            ├ lldptlv:UInt16 A 16-bit unsigned integer (UInt16) type, length, value (TLV).            ├ lldptlv:UInt32 A 32-bit unsigned integer (UInt32) type, length, value (TLV).            ├ lldptlv:UInt64 A 64-bit unsigned integer (UInt64) type, length, value (TLV).          ├ lldptlv:Ip An IP type, length, value (TLV).          ├ lldptlv:Mac A MAC type, length, value (TLV).          ├ lldptlv:Text A text type, length, value (TLV).          ├ lldptlv:UByte An 8-bit unsigned integer (UByte) type, length, value (TLV).          ├ lldptlv:UInt16 A 16-bit unsigned integer (UInt16) type, length, value (TLV).          ├ lldptlv:UInt32 A 32-bit unsigned integer (UInt32) type, length, value (TLV).          ├ lldptlv:UInt64 A 64-bit unsigned integer (UInt64) type, length, value (TLV).        ├ lldp:CtrlrAdjEp The controller adjacency EP information, which is used by PE to cache. Controller adjEP information handles adjacency deletes.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ lldp:RsCtrlrAdjEpToStAdjEp A source relation to the ARP static adjacency endpoint.        ├ lldp:IfSendTask Information returned by or provided to the task.        ├ lldp:IfStats Holds LLDP INTF statistics operational information and is a singleton within an interface.        ├ lldptlvpol:Complex A complex type, length, value (TLV).          ├ lldptlvpol:Ip An IP type, length, value (TLV).          ├ lldptlvpol:Mac A MAC type, length, value (TLV).          ├ lldptlvpol:Text A text type, length, value (TLV).          ├ lldptlvpol:UByte An 8-bit unsigned integer (UByte) type, length, value (TLV).          ├ lldptlvpol:UInt16 A 16-bit unsigned integer (UInt16) type, length, value (TLV).          ├ lldptlvpol:UInt32 A 32-bit unsigned integer (UInt32) type, length, value (TLV).          ├ lldptlvpol:UInt64 A 64-bit unsigned integer (UInt64) type, length, value (TLV).        ├ lldptlvpol:Ip An IP type, length, value (TLV).        ├ lldptlvpol:Mac A MAC type, length, value (TLV).        ├ lldptlvpol:Text A text type, length, value (TLV).        ├ lldptlvpol:UByte An 8-bit unsigned integer (UByte) type, length, value (TLV).        ├ lldptlvpol:UInt16 A 16-bit unsigned integer (UInt16) type, length, value (TLV).        ├ lldptlvpol:UInt32 A 32-bit unsigned integer (UInt32) type, length, value (TLV).        ├ lldptlvpol:UInt64 A 64-bit unsigned integer (UInt64) type, length, value (TLV).        ├ nw:RtPathToIf A target relation to the interface information.      ├ lldp:InstIfSendTask       ├ lldp:InstSendTask Information returned by or provided to the instance.      ├ lldp:InstStats The LLDP instance statistics operational information. This is a singleton within LLDP.      ├ lldp:MgmtAddr Local management address.      ├ lldp:RsLldpInstPolCons A source relation to the node level LLDP policy.      ├ lldptlvpol:Complex A complex type, length, value (TLV).        ├ lldptlvpol:Ip An IP type, length, value (TLV).        ├ lldptlvpol:Mac A MAC type, length, value (TLV).        ├ lldptlvpol:Text A text type, length, value (TLV).        ├ lldptlvpol:UByte An 8-bit unsigned integer (UByte) type, length, value (TLV).        ├ lldptlvpol:UInt16 A 16-bit unsigned integer (UInt16) type, length, value (TLV).        ├ lldptlvpol:UInt32 A 32-bit unsigned integer (UInt32) type, length, value (TLV).        ├ lldptlvpol:UInt64 A 64-bit unsigned integer (UInt64) type, length, value (TLV).      ├ lldptlvpol:Ip An IP type, length, value (TLV).      ├ lldptlvpol:Mac A MAC type, length, value (TLV).      ├ lldptlvpol:Text A text type, length, value (TLV).      ├ lldptlvpol:UByte An 8-bit unsigned integer (UByte) type, length, value (TLV).      ├ lldptlvpol:UInt16 A 16-bit unsigned integer (UInt16) type, length, value (TLV).      ├ lldptlvpol:UInt32 A 32-bit unsigned integer (UInt32) type, length, value (TLV).      ├ lldptlvpol:UInt64 A 64-bit unsigned integer (UInt64) type, length, value (TLV).  ├ macsec:Entity  Holds macsec control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ macsec:Inst  This objects hold per macsec instance information. There is only one instance of macsec running in the system today      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ macsec:FabIf         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ macsec:CAStats           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ macsec:IfStats  MACSEC MKA Interface Statistics          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ macsec:Mgmt           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ nw:RtPathToIf A target relation to the interface information.      ├ macsec:GlobalStats  MACSEC MKA Global Statistics        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ macsec:If         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ macsec:CAStats           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ macsec:IfStats  MACSEC MKA Interface Statistics          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ macsec:Mgmt           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ nw:RtPathToIf A target relation to the interface information.      ├ macsec:IfTracker         ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ mcp:Entity The MisCabling Protocol (MCP) entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ mcp:Inst The MisCabling Protocol (MCP) instance information. In the current implementation, only one instance of MCP is running in the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ mcp:If The Mis-cabling Protocol (MCP) configured interface. The interface type can be physical Ethernet Interface or the Port-Channel Interface. The MCP packets are sent over the logic interfaces.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ nw:RtPathToIf A target relation to the interface information.      ├ mcp:RsMcpInstPolCons   ├ mgmt:MgmtIf The management interface.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ im:MgmtIf The runtime state of a management interface.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.    ├ mgmt:RtMgmtIf  Association to the corresponding mgmt::MgmtIf    ├ mgmt:RtRtdMgmtConf A target relation to the management interface.    ├ nw:RtPathToIf A target relation to the interface information.    ├ rmon:Dot1d The Dot1d statistics.    ├ rmon:Dot3Stats The Dot3 statistics.    ├ rmon:EgrCounters  Interface egress Drop counters    ├ rmon:EtherStats The Ethernet statistics.    ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters    ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters    ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters    ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters    ├ rmon:IfFcmac  fcmac interface In Out statistics counters    ├ rmon:IfHCIn The interface high capacity input statistics.    ├ rmon:IfHCOut The interface high capacity output statistics.    ├ rmon:IfIn The interface input statistics.    ├ rmon:IfMacsecrx  Interface Macsec Rx counters    ├ rmon:IfMacsectx  Interface Macsec Tx counters    ├ rmon:IfOut The interface output statistics.    ├ rmon:IfStorm     ├ rmon:IngrCounters  Ingress counters    ├ rmon:IpIn The IPV4 input statistics.    ├ rmon:Ipv6IfStats The IPV6 interface statistics.  ├ mld:Entity  Holds mld control plane entity information    ├ mld:Inst  This objects hold per mld instance information. There is only one instance of mld running in the system today      ├ mld:Dom  This objects hold per mld domain information        ├ mld:Db  MLD databases          ├ mld:Route  MLD Group/Src MOs            ├ mld:Oif  MLD Oif MOs. We create one object per interface in the oif list        ├ mld:If  This objects hold per mld interface information          ├ mld:IfStats  MLD Interface Stats Oper MO          ├ mld:QuerierP  This object holds querier information per interface            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ mld:RepP  This object holds mld reports policy state per Interface          ├ mld:ResP  This object holds resource (router state) limit policy to limit amount of multicast routing state on the router            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ mld:StRepP  This object holds static mld reports policy state per Interface          ├ nw:RtPathToIf A target relation to the interface information.        ├ mld:SSMXlate  This objects hold per mld domain information      ├ mld:ExtDom  This objects hold per mld external domain information        ├ mld:ExtIf  This objects hold per mld external interface information          ├ nw:RtPathToIf A target relation to the interface information.  ├ mldsnoop:Entity  Holds mld control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ mldsnoop:Inst  This objects hold per mld instance information. There is only one instance of mld running in the system today      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ mldsnoop:Dom  This objects hold per mld snooping domain information        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ mldsnoop:CktEp  Circuit endpoint representing EPG          ├ mldsnoop:ACtrlP  Route control policy for igmp multicast snoop.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ mldsnoop:TgtIf  Target Interface (outgoing interface list)              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag           ├ mldsnoop:StMcGrp  Multicast Snoop Configured statically            ├ mldsnoop:McSrc  IPMC Source IP              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ mldsnoop:TgtIf  Target Interface (outgoing interface list)                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ tag:Annotation               ├ tag:Tag         ├ mldsnoop:Db  IGMP database          ├ mldsnoop:McGrpRec  Multicast Group records            ├ mldsnoop:EpgRec  EPG entries in mcast group record              ├ mldsnoop:ReportRec  MLD report record snooped by mld-snoop application                ├ mldsnoop:OIFRec  OIF list (outgoing interface list)                  ├ mldsnoop:HostRec  Host Record List (Used for Explicit Host Tracking)            ├ mldsnoop:ReportRec  MLD report record snooped by mld-snoop application              ├ mldsnoop:OIFRec  OIF list (outgoing interface list)                ├ mldsnoop:HostRec  Host Record List (Used for Explicit Host Tracking)        ├ mldsnoop:DomStats  This objects hold per mld domain statistics operational information. This is a singleton within a Dom        ├ mldsnoop:QuerierP  Querier policy          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ mldsnoop:QuerierSt  Querier state          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ mldsnoop:RtrIf  Multicast router if          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ mldsnoop:StRtrIf  Multicast router if that is configured statically          ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.          ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf          ├ nw:RtPathToIf A target relation to the interface information.      ├ mldsnoop:InstStats  This objects hold per Instance statistics operational information. This is a singleton within Instance  ├ mock:MockRoot This is generated and used only by internal processes    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ mock:MockSession This is generated and used only by internal processes      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ mock:Stats This is generated and used only by internal processes        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ mock:Counter This is generated and used only by internal processes          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ tag:Annotation       ├ tag:Tag     ├ tag:Annotation     ├ tag:Tag   ├ monitor:Entity Span manager control plane entity information.    ├ monitor:Db The abstraction of the coop database (repository).      ├ monitor:EpRec The endpoint (EP) records.    ├ monitor:Session The monitor session definition. There can only be a few sessions active at a given time (with a maximum of 4).      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ monitor:ERDest The ERSPAN destination information.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ monitor:LocalDest The local span destination information.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ monitor:Source The sources to be monitored.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ mp:Localfabric  Local Fabric/Pod attributes  ├ mp:Site  Site object added for multi site support    ├ mp:Fabric  Fabric object added for multi site support      ├ mp:Fabricreach  Fabric Reachability addresses  ├ mpls:Entity  Holds mpls entity information    ├ mpls:LabelRange  Information about MPLS Label Range to be used      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag   ├ mrib:Entity  Holds MRIB entity information    ├ mrib:Inst  These objects hold per routed multicast instance information      ├ mrib:Dom  This objects hold per pim domain (vrf) information  ├ multidomain:InternalCtxInfo  Mo that carries info related to the Internal Ctx    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ mdp:MultiDomEpPInfoHolderRef       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ multidomain:MultiDomainIps     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ multidomain:MultiDomainVnids  VNIDs assigned to External and Internal VRFs created for each Campus VRF    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ nat:Entity  Holds nat entity information    ├ nat:Entry  NatTranslationInfo  ├ nd:Entity The neighbor discovery protocol entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ nd:Inst The per neighbor discovery instance information. In the current implementation, only one instance of ND is running in the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ nd:Dom A neighbor discovery protocol domain.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ nd:BD  This object holds nd information that is operated at a interface level          ├ nd:CktEp  This object holds nd information that is operated at a cktep level            ├ nd:SvcAdjEp  Service nd adjacency definitions              ├ nd:Sla  This object will take the Dn of slaOperation Mo for counting the references of IPSLA using same IP address              ├ svcredir:EpPRedirPolCons  EpPRedirPol Consumer, represents the EpPRedirPol which uses the destmon          ├ nd:SvcAdjEp  Service nd adjacency definitions            ├ nd:Sla  This object will take the Dn of slaOperation Mo for counting the references of IPSLA using same IP address            ├ svcredir:EpPRedirPolCons  EpPRedirPol Consumer, represents the EpPRedirPol which uses the destmon        ├ nd:Db A neighbor discovery database.          ├ nd:AdjEp The neighbor discovery adjacency endpoint. This is the endpoint object that contains information regarding dynamically learned endpoints.        ├ nd:If The per ND protocol interface information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ nd:IfStats The neighbor discovery interface statistics. This is a singleton within an interface.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ nd:Pfx A list of prefixes to be placed in the Prefix Information options of the Router Advertisement messages sent from the interface.          ├ nd:StAdjEp The static neighbor discovery adjacency definitions.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ nd:RtEpDefRefToStAdjEpV6 A target relation to static neighbor discovery adjacency definitions.          ├ nw:RtPathToIf A target relation to the interface information.  ├ npv:Entity  Holds NPV entity information    ├ npv:Inst Per NPV instance information. There is only one instance of NPV instance running in the system.      ├ npv:ExtIf  Runtime Ext Interface        ├ npv:ExtVsan NPV external VSAN.        ├ npv:TargetIf  srvIf extIf runtime Mapping MO      ├ npv:SrvIf Runtime Server Interface.        ├ npv:SrvIfFlogi  NPV srv multiple flogi        ├ npv:SrvVsan NPV Server VSAN.        ├ npv:TargetIf  srvIf extIf runtime Mapping MO  ├ nw:ConnGrp A connection group.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ nw:LabelEp  Label endpoint      ├ nw:RsLabelAttEntityPCons  Relationship with the attachable entity profile consumed by this label      ├ nw:RsLabelEpToAllowedEthIf  Associations to the allowed interfaces for the label      ├ nw:RsLabelEpToConsumerEthIf  Associations to the interfaces consuming the label      ├ nw:RsLabelL2IfPolCons  Relationship with the L2 interface policy consumed by this label      ├ nw:RsLabelToPathAtt  Associations to the path attachment for the label      ├ nw:RtVsanLabelAtt  Associations to nw:LabelEp with rel-mo to vfcif "    ├ nw:PathEp An abstraction of an endpoint path.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l1:ProcessNodeAtt  Mo for indicating that the port needs to be processed for Node Attachment      ├ l2:PortSecurityPolDef  Port Security Policy        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ nw:RsPathToIf A source relation to the interface information.      ├ nw:RtDyPathAtt A target relation to the endpoint path.      ├ nw:RtEpDefRefToPathEp       ├ nw:RtEpDefToPathEp A target relation to the abstraction of an endpoint path.      ├ nw:RtL3EpDefToPathEp       ├ nw:RtPathDomAtt A target relation to the endpoint path.      ├ nw:RtStPathAtt A target relation to the endpoint path.      ├ nw:RtVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif "  ├ nw:Vdc A virtual device context.  ├ opflex:ODevCmdReq This is generated and used only by internal processes.  ├ opflex:ODevCmdResp This is generated and used only by internal processes.  ├ opflex:ODevRefCont  ODev ref container under the topSys for the leaf    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ opflex:ODevRef  ODev ref represents a refernce to opflex device connected to the switch. This object is owned by the opflex element  ├ opflex:OeHupTrigger     ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ opflex:PodInfo   ├ opflex:VtepRefCont  Vtep ref container under the topSys for the leaf    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ opflex:VtepRef  Vtep ref represents a reference to opflex idep corr. to the vtep connected to the switch. This object is owned by the opflex element  ├ opflexp:HupTrigger     ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ opflexp:PolicyResolveReq   ├ opflexp:Reference  Represents a reference in the genie model. Used to pass information between comm and doer thread for various opflex methods  ├ opflexp:ReportedEpReg  registry of IvLeaf end-points conrtrolled by external policy enforcement points (opflex agents)    ├ opflexp:Ep  Publish IvLeaf EP for COOP consumption      ├ opflexp:IpAddr  IP entries in the endpoint  ├ opflexp:ReportedRouteReg     ├ opflexp:Route  Route      ├ opflexp:Nexthop   ├ ospf:Entity The OSPF control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ ospf:Inst The per OSPF instance information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ ospf:Dom The per OSPF domain (vrf) information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ ospf:Area The OSPF information that operates at an interface level.          ├ ospf:AreaStats The OSPF area-related statistics.          ├ ospf:Db The OSPF database information.            ├ ospf:LsaRec The LSA records information.            ├ ospf:Route The OSPF route information is used to establish OSPF sessions between peers.              ├ ospf:McNexthop The OSPF Multicast Nexthop information.              ├ ospf:UcNexthop The Unicast Nexthop information.          ├ ospf:DefRtLeakP The default route leak policy information.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospf:InterAreaRtSum The inter-area route summarization. This is configured on ABRs, summarizing routes between areas in the autonomous system.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospf:LsaLeakCtrlP  Lsa Leak Control concrete class.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospf:LsaLeakP The link-state advertisement (LSA) leak policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospf:RtExtDefToOspfArea         ├ ospf:Db The OSPF database information.          ├ ospf:LsaRec The LSA records information.          ├ ospf:Route The OSPF route information is used to establish OSPF sessions between peers.            ├ ospf:McNexthop The OSPF Multicast Nexthop information.            ├ ospf:UcNexthop The Unicast Nexthop information.        ├ ospf:DefRtLeakP The default route leak policy information.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:DomStats The OSPF domain-related statistics.        ├ ospf:ExtRtSum An external route summarization is specific to external routes that are injected into OSPF using route leak. Configure external route summarization on ASBRs that are leaking routes into OSPF.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:Gr The OSPF domain related statistics.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:If The OSPF information that is operated at an interface level.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ nw:RtPathToIf A target relation to the interface information.          ├ ospf:AdjEp An adjacency endpoint contains information regarding dynamically learned endpoints.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ ospf:AdjStats The OSPF neighbor-related statistics.            ├ ospf:GrSt OSPF graceful restart operational information.          ├ ospf:AuthP The OSPF authentication policy information.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospf:Db The OSPF database information.            ├ ospf:LsaRec The LSA records information.            ├ ospf:Route The OSPF route information is used to establish OSPF sessions between peers.              ├ ospf:McNexthop The OSPF Multicast Nexthop information.              ├ ospf:UcNexthop The Unicast Nexthop information.          ├ ospf:IfStats The OSPF interface related statistics.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)          ├ ospf:RtIfDefToOspfIf A target relation to the OSPF information that is operated at an interface level.          ├ ospf:TrafficStats The OSPF domain traffic statistics.        ├ ospf:InterLeakP Inter protocol route leak policy defines the distribution of routes from other protocols to OSPF.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:LeakCtrlP The leak controls that determine the number of routes leaked.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:LsaCtrl The LSA-related frequency control information.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:MaxLsaP The maximum link-state advertisement (database overflow) feature.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ ospf:Overload  This object holds ospf overload config          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospf:OverloadEntry  This object holds ospf overload entries            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:RibLeakP         ├ ospf:SpfComp The SPF computation frequency controls information.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospf:TrafficStats The OSPF domain traffic statistics.  ├ ospfv3:Entity The OSPFV3 control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ ospfv3:Inst The per OSPF instance information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ ospfv3:Dom The OSPF domain (VRF) information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ ospfv3:Area The OSPF information that is operated at an interface level.          ├ ospfv3:AreaAf The per address family OSPFv3 area information.            ├ ospfv3:DefRtLeakP The default route leak policy.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ ospfv3:InterAreaRtSum The inter-area route summarization, which is configured on ABRs, summarizing routes between areas in the autonomous system.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ ospfv3:LsaLeakCtrlP  Lsa Leak Control concrete class.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ ospfv3:LsaLeakP The link-state advertisement leak concrete class.              ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospfv3:AreaStats The OSPF area related statistics.          ├ ospfv3:Db The OSPF databases.            ├ ospfv3:LsaRec The LSA records information.            ├ ospfv3:Route The internal OSPF routes in the OSPF RIB (Routing Information Base).              ├ ospfv3:McNexthop The OSPF Multicast Nexthop information.              ├ ospfv3:UcNexthop The unicast nexthop information.          ├ ospfv3:RsAreaSecAssocAtt  ipsec SA        ├ ospfv3:Db The OSPF databases.          ├ ospfv3:LsaRec The LSA records information.          ├ ospfv3:Route The internal OSPF routes in the OSPF RIB (Routing Information Base).            ├ ospfv3:McNexthop The OSPF Multicast Nexthop information.            ├ ospfv3:UcNexthop The unicast nexthop information.        ├ ospfv3:DomAf The OSPF address family domain (VRF) information.          ├ ospfv3:DefRtLeakP The default route leak policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospfv3:ExtRtSum The external route summarization, which is specific to external routes that are injected into OSPF using route leak. Configure external route summarization on ASBRs that are leaking routes into OSPF.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospfv3:InterLeakP The inter protocol route leak policy, which defines the distribution of routes from other protocols to OSPF.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospfv3:LeakCtrlP The leak controls that determine the number of routes leaked.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ ospfv3:RibLeakP         ├ ospfv3:DomStats The OSPF domain related statistics.        ├ ospfv3:Gr The OSPF domain related statistics.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospfv3:If An OSPF interface.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ nw:RtPathToIf A target relation to the interface information.          ├ ospfv3:AdjEp The neighbor information.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ ospfv3:AdjStats The OSPFV3 neighborship statistics.            ├ ospfv3:GrSt The OSPF graceful restart operational information.          ├ ospfv3:Db The OSPF databases.            ├ ospfv3:LsaRec The LSA records information.            ├ ospfv3:Route The internal OSPF routes in the OSPF RIB (Routing Information Base).              ├ ospfv3:McNexthop The OSPF Multicast Nexthop information.              ├ ospfv3:UcNexthop The unicast nexthop information.          ├ ospfv3:IfStats The OSPF interface related statistics.          ├ ospfv3:RsIfSecAssocAtt  ipsec SA          ├ ospfv3:RtIfDefToOspfv3If A target relation to OSPF information that is operated at a interface level.          ├ ospfv3:TrafficStats The OSPF domain traffic statistics.        ├ ospfv3:LsaCtrl The LSA-related frequency control information.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospfv3:MaxLsaP The per domain max-lsa information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ ospfv3:RsDomSecAssocAtt  ipsec SA        ├ ospfv3:SpfComp The SPF computation frequency controls information.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ ospfv3:TrafficStats The OSPF domain traffic statistics.  ├ pc:AggrIf The aggregated interface, which is a collection of physical ports; aka port channel    ├ eltm:AggrIf     ├ ethpm:AggrIf Port channel interface information.      ├ ethpm:PortCap Port runtime capabilities, for example maximum speed.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fv:DomDef The domain information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fv:RsDomDefNs A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsDomDefNsLocal A source relation to the VxLAN namespace policy definition. This is an internal object.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ fv:RtToDomDef A target relation to the domain definition. This is an internal object.      ├ fv:RtToFvDomDef       ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:EeeP An energy efficient Ethernet policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l1:LoadP A load interval policy.    ├ l1:RsAttEntityPCons     ├ l1:RsCdpIfPolCons A source relation to CDP interface policy parameters. Note that this relation is an internal object.    ├ l1:RsCeMonitorPolCons     ├ l1:RsCoppIfPolCons  Relationship with the coppIf policy consumed by this physical interface    ├ l1:RsDwdmFabIfPolCons     ├ l1:RsDwdmIfPolCons     ├ l1:RsFIfPolCons  Relationship with the FIfPol policy consumed by this physical interface    ├ l1:RsFcIfPolCons  Relationship with the fcIfPol policy consumed by this physical interface    ├ l1:RsHIfPolCons A source relation to the host interface policy. Note that this relation is an internal object.    ├ l1:RsIpv4MonitorPolCons  Relationship with the Monitor policy consumed by this physical interface    ├ l1:RsIpv6MonitorPolCons     ├ l1:RsL2IfPolCons     ├ l1:RsL2PortAuthCons  Relationship with the Port Authentication policy consumed by this physical interface    ├ l1:RsL2PortSecurityCons  Relationship with the Port Security policy consumed by this physical interface    ├ l1:RsL3IfPolCons  Relationship with the L3 interface policy consumed by this physical interface    ├ l1:RsLacpIfPolCons A source relation to the port-Level LACP member policy. Note that this relation is an internal object.    ├ l1:RsLinkFlapPolCons     ├ l1:RsLldpIfPolCons A source relation to the LLDP policy parameters for the interface. Note that this relation is an internal object.    ├ l1:RsMacsecFabPolCons     ├ l1:RsMacsecPolCons  Relationship with the cdp/lacp/lldp if policy consumed by this physical interface    ├ l1:RsMcpIfPolCons     ├ l1:RsMonPolIfPolCons A source relation to the base monitoring policy model. Note that this relation is an internal object.    ├ l1:RsPoeIfPolCons  Relationship with the poe policy consumed by this physical interface    ├ l1:RsQosEgressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Egress    ├ l1:RsQosIngressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Ingress    ├ l1:RsQosPfcIfPolCons  Relationship with the qosPfcPol policy consumed by this physical interface    ├ l1:RsQosSdIfPolCons  Relationship with the SdIfPol policy consumed by this physical interface    ├ l1:RsStormctrlIfPolCons     ├ l1:RsStpIfPolCons A source relation to the Spanning-Tree Protocol (STP) policy. Note that this relation is an internal object.    ├ l1:RtBrConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtEncPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l1:RtEthIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtExtConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtLabelEpToAllowedEthIf  Associations to the allowed interfaces for the label    ├ l1:RtLabelEpToConsumerEthIf  Associations to the interfaces consuming the label    ├ l1:RtLsNodeToIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtNodePortAtt A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.    ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.    ├ l1:RtToObservedEthIf     ├ l1:StormCtrlP       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ nw:RtPathToIf A target relation to the interface information.    ├ pc:LbP       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ pc:RsLacpPolCons A source relation to the LACP policy.    ├ pc:RsMbrIfs A source relation to the Layer 1 physical Ethernet interface information object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ pc:RtAccBndlGrpToAggrIf A target relation to the aggregated interface.    ├ pc:RtFexBndlGrpToAggrIf A target relation to the aggregated interface.    ├ pc:RtVpcConf A target relation to the aggregated interface.    ├ rmon:Dot1d The Dot1d statistics.    ├ rmon:Dot3Stats The Dot3 statistics.    ├ rmon:EgrCounters  Interface egress Drop counters    ├ rmon:EtherStats The Ethernet statistics.    ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters    ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters    ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters    ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters    ├ rmon:IfFcmac  fcmac interface In Out statistics counters    ├ rmon:IfHCIn The interface high capacity input statistics.    ├ rmon:IfHCOut The interface high capacity output statistics.    ├ rmon:IfIn The interface input statistics.    ├ rmon:IfMacsecrx  Interface Macsec Rx counters    ├ rmon:IfMacsectx  Interface Macsec Tx counters    ├ rmon:IfOut The interface output statistics.    ├ rmon:IfStorm     ├ rmon:IngrCounters  Ingress counters    ├ rmon:IpIn The IPV4 input statistics.    ├ rmon:Ipv6IfStats The IPV6 interface statistics.  ├ pc:Entity     ├ pc:Inst This object holds per port channel instance information  ├ pc:FcEntity     ├ pc:FcInst  This object holds per port channel instance information  ├ pim6:Entity  Holds pim control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ pim6:Inst  This objects hold per pim instance information      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ pim6:Dom  This objects hold per pim6 domain (vrf) information        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim6:ASMPatP  This object holds policy for Any Source Multicast (ASM) pattern          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:RegTrP  This object holds the register traffic policy            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:SGRangeExpP  This object holds (S,G) expiry timer policy for specified range          ├ pim6:SharedRangeP  This object holds group range to use only shared tree        ├ pim6:AcastRPFuncP  This object holds policy for Anycast RP Function Specifies the anycast and local interface for the anycast RP and all the peer's local info Anycast RP is not supported for BSR and Auto-RP          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:AcastRPPeer  This object holds Anycast RP Peer Info        ├ pim6:AutoRPP  This object holds policy for Auto-RP method of RP discovery          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:MAFilterP  This object holds policy for choosing Mapping Agent from among the candidates            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:MAFuncP  This object holds policy for Auto-RP Mapping Agent Function            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:RPFilterP  End Child MOs This object holds policy for choosing RPs from among RP candidates            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:RPFuncP  This object holds policy for RP Function            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ pim6:RPGrpRange  This object holds multicast group ranges for RP        ├ pim6:BSRP  This object holds policy for Bootstrap Router method of RP discovery          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:BSRFilterP  This object holds policy for choosing BSRs from among BSR candidates            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:BSRFuncP  This object holds policy for Bootstrap Router Function            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:RPFilterP  End Child MOs This object holds policy for choosing RPs from among RP candidates            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:RPFuncP  This object holds policy for RP Function            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ pim6:RPGrpRange  This object holds multicast group ranges for RP        ├ pim6:BidirPatP  This object holds policy for Bidirectional Multicast (BiDir) pattern          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim6:Db  PIM6 databases          ├ pim6:AutoRPPInfo           ├ pim6:BSRInfo           ├ pim6:RPGrange             ├ pim6:RtRP2Grange           ├ pim6:RPInfo             ├ pim6:RsRP2Grange           ├ pim6:Route  PIM Group/Src MOs            ├ pim6:Oif  PIM6 OIF list MOs        ├ pim6:DomStats  This object holds the pim dom related statistics        ├ pim6:If  This object holds pim6 information that is operated at a interface level          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ nw:RtPathToIf A target relation to the interface information.          ├ pim6:AdjEp  This object holds pim neighbor information            ├ pim6:AdjStats  This object holds the pim neighbor related statistics          ├ pim6:Db  PIM6 databases            ├ pim6:AutoRPPInfo             ├ pim6:BSRInfo             ├ pim6:RPGrange               ├ pim6:RtRP2Grange             ├ pim6:RPInfo               ├ pim6:RsRP2Grange             ├ pim6:Route  PIM Group/Src MOs              ├ pim6:Oif  PIM6 OIF list MOs          ├ pim6:HelloTrP  This object holds the hello traffic policy            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:IfStats  This object holds the pim interface related statistics          ├ pim6:JPTrP  This object holds the join-prune traffic policy            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:RtIfDefToPim6If           ├ pim6:TrafficStats  This object holds the pim control traffic stats          ├ tag:Annotation           ├ tag:Tag         ├ pim6:InterVRFP  This object holds policy for Inter VRF          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:InterVRF  This object holds policy for Static RP Entry        ├ pim6:ResP  This object holds resource (router state) limit policy to limit amount of multicast routing state on the router          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim6:SSMPatP  This object holds policy for Source Specific Multicast (SSM) pattern          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:SSMRangeP  This object holds SSM group range        ├ pim6:StaticRPP  This object holds policy for Static RP          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim6:StaticRP  This object holds Static RP Info If rp addr is configured locally, router assumes RP functionality            ├ pim6:RPGrpRange  This object holds multicast group ranges for RP        ├ pim6:TrafficStats  This object holds the pim control traffic stats        ├ tag:Annotation         ├ tag:Tag       ├ pim6:Overload  This object holds pim overload config        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim6:OverloadEntry  This object holds pim overload entries          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ pim:Capability PIM capability.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ pim:Entity PIM control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ pim:Inst PIM instance information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ pim:Dom PIM domain (VRF) information.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ pim:ASMPatP The any-source multicast pattern policy.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RegTrP PIM register traffic policy            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:SGRangeExpP  This object holds (S,G) expiry timer policy for specified range          ├ pim:SharedRangeP Shared tree group range        ├ pim:AcastRPFuncP The Anycast RP function policy. Specifies the Anycast and local interface for the Anycast RP and all the peer's local info.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:AcastRPPeer The Anycast RP peer info.        ├ pim:AutoRPP The Auto-RP policy.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:MAFilterP Mapping agent (MA) filter policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:MAFuncP Auto-RP mapping agent (MA) function policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RPFilterP The RP filter policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RPFuncP RP function policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ pim:RPGrpRange The RP multicast group range.        ├ pim:BSRP The Bootstrap Router (BSR) policy.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:BSRFilterP The PIM Bootstrap Router (BSR) filter policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:BSRFuncP The Bootstrap Router (BSR) function policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RPFilterP The RP filter policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RPFuncP RP function policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.            ├ pim:RPGrpRange The RP multicast group range.        ├ pim:BidirPatP The Bidirectional multicast (BiDir) pattern.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim:Db PIM databases.          ├ pim:AutoRPPInfo The Auto-RP policy information.          ├ pim:BSRInfo The Bootstrap Router (BSR) information.          ├ pim:RPGrange The RP group range.            ├ pim:RtRP2Grange           ├ pim:RPInfo RP information            ├ pim:RsRP2Grange           ├ pim:Route  PIM Group/Src MOs            ├ pim:Oif  PIM OIF list MOs        ├ pim:DomStats PIM domain statistics.        ├ pim:If PIM interface information.          ├ nw:RtPathToIf A target relation to the interface information.          ├ pim:AdjEp PIM neighbor information.            ├ pim:AdjStats PIM neighbor related statistics.          ├ pim:Db PIM databases.            ├ pim:AutoRPPInfo The Auto-RP policy information.            ├ pim:BSRInfo The Bootstrap Router (BSR) information.            ├ pim:RPGrange The RP group range.              ├ pim:RtRP2Grange             ├ pim:RPInfo RP information              ├ pim:RsRP2Grange             ├ pim:Route  PIM Group/Src MOs              ├ pim:Oif  PIM OIF list MOs          ├ pim:HelloTrP  This object holds the hello traffic policy            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:IfStats  This object holds the pim interface related statistics          ├ pim:JPTrP Join/prune traffic policy.            ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:RtIfDefToPimIf  Relationship to the PIM interfaces          ├ pim:TrafficStats  This object holds the pim control traffic stats        ├ pim:InterVRFP  This object holds policy for Inter VRF          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:InterVRF  This object holds policy for Static RP Entry        ├ pim:ResP Resource (router state) limit policy.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim:SSMPatP Source-specific multicast pattern          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:SSMRangeP Source-specific group range        ├ pim:StaticRPP Static RP policy          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ pim:StaticRP Static RP information. If the RP address is configured locally, the router assumes RP functionality.            ├ pim:RPGrpRange The RP multicast group range.            ├ pim:RtLbIfToStaticRP         ├ pim:TrafficStats  This object holds the pim control traffic stats      ├ pim:Overload PIM overload configuration        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ pim:OverloadEntry PIM overload entries          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ pki:FabricSelfCACertsModified     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ platformmgr:PlmgrTrig  To trigger objstore update in platformmgr  ├ poe:Entity  Holds Power over Ethernet control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ poe:Inst  This objects hold per Power over Ethernet instance information. There is only one instance of Power over Ethernet running in the system today      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ poe:If  This object holds Power over Ethernet information that is operated at a interface level        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ nw:RtPathToIf A target relation to the interface information.        ├ poe:Module         ├ poe:VDAEp  Copy of Module Mo owned by PE for triggering epAttachOrDetach          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)  ├ poe:Nic     ├ comp:EpPConn An object representing the connection information of a VM endpoint. This is used internally by the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ comp:Ip     ├ comp:PrimaryEncapDef       ├ comp:EpPConn An object representing the connection information of a VM endpoint. This is used internally by the system.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ comp:RsNicAdj A source relation to the connectivity to the external network. Note that this relation is an internal object.    ├ comp:RsUsegEpPD       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ comp:RtNic A target relation to the abstract class representing network interface cards. Note that this relation is an internal object.    ├ comp:RtToNic     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ proc:Container  Container of processes in the system    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ proc:App  Application process entry in the system      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)  ├ proc:Entity A container of processes in the system. This object holds detailed information about various processes running on the APIC.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ proc:Entry The process entry in the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)  ├ proc:System A container of processes in the system. This object holds detailed information about various processes running on the switch.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ proc:Proc The process properties for an entry in the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)  ├ ptp:Entity  Holds PTP entity information    ├ ptp:Inst  This object holds PTP instance information.      ├ ptp:If  This object holds interface information        ├ nw:RtPathToIf A target relation to the interface information.        ├ ptp:Unicast  Holds PTP Unicast information          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ ptp:UnicastIp  This object holds unicast ip address information            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ tag:Annotation           ├ tag:Tag   ├ qosm:Entity A policy container for QoS related entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ qosm:Class A QoS policy.    ├ qosm:GlobalEgressMplsRule  Qos classification rules based on dscp values for traffic towards MPLS      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ qosm:GlobalIngressMplsRule  Qos classification rules based on Exp values      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ qosm:If A QoS interface. This object holds information about QoS at an interface level.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ qosm:IfClass A container for information about QoS operated at a per port per class level.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ qosm:QStatDirection           ├ qosm:QStatType       ├ qosp:InfraDscpMap  Qos class to DSCP marking policy for multipod and remote tor        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ qosp:Class A container for the QoS fabric class policy. Each class describes QoS attributes such as MTU.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ qosp:Buffer The buffering information of a class, such as the minimum buffer required for a class, which is applied at system level.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ qosp:Cong A container for the congestion policy. This container holds information that describes the congestion parameters of the class such as ECN, WRED, and Tail-drop. These congestion parameters are applied at per class-level in the system.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ qosp:PrioFlowCtrl         ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ qosp:Queue A container for the queue management policy. This container holds information that describes the queue threshold parameters, such as the management method, which are applied at a per-class basis in the system.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ qosp:Sched A container for the schedule policy. This container holds information that describes the bandwidth and scheduling algorithm (Strict priority or WRR), which are applied at a per-class basis in the system.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ qosp:Dot1pRule The QoS classification rules based on dot1p values.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ qosp:RtDot1pRuleAtt A target relation to the set of Dot1p rules.      ├ qosp:RtL3dot1pRuleAtt  Relation to the set of Dot1P rules    ├ qosp:DscpRule The QoS classification rules based on DSCP values.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ qosp:RtDscpRuleAtt A target relation to the set of DSCP rules.      ├ qosp:RtL3dscpRuleAtt  Relation to the set of DSCP rules    ├ qosp:EgressMplsRule  Qos classification rules based on dscp values for traffic towards MPLS      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ qosp:RtEgressMplsRuleAtt  Relation to Egress MPLS rules    ├ qosp:InfraDscpMap  Qos class to DSCP marking policy for multipod and remote tor      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ qosp:IngressMplsRule  Qos classification rules based on Exp values      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ qosp:RtIngressMplsRuleAtt  Relation to Ingress MPLS rules    ├ qosp:IpRule The QoS classification rules based on IP values.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ radius:Entity     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ radius:Inst       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ radius:AAAServerGroup         ├ radius:AAAServer       ├ radius:ServerHost         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)  ├ regress:If This is generated and used only by internal processes.    ├ nw:RtPathToIf A target relation to the interface information.  ├ rlpodred:RlPodRedPolicy  RemoteLEaf pod redudancy trigger  ├ rlpodred:RlSwitchoverPod  RemoteLEaf pod redudancy trigger  ├ rpm:Entity A container for route processor module control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ kc:Entry  Key Chain      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ kc:Key  Key        ├ kc:AcceptLifeTime         ├ kc:SendLifeTime       ├ kc:MACSecKey  MACSec Key        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ kc:SendLifeTime     ├ rtextcom:Rule A route control rule for extended community lists.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ rtextcom:Entry An extended community list entry.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtextcom:Item An item in the extended community list.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ rtextcom:RtExtCommAtt A target relation to a route control rule for extended community lists.    ├ rtmap:Rule A route map rule.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ rtmap:Entry An RPM route-map entry.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ l3ext:Cons The Layer 3 outside consumer.        ├ rtmap:MatchExtComm A match rule based on extended communities.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:RsExtCommAtt A source relation to the route control rule for extended community lists.        ├ rtmap:MatchIPv6Mcast  Match Multicast          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:MatchIpMcast  Match Multicast          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:MatchNhIf  Match rule based on Nexthop Interace          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:MatchOspfArea  Match rule based on Ospf Area          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:MatchRegComm A match rule based on regular communities.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:RsRegCommAtt A source relation to the route control rule for regular community lists.        ├ rtmap:MatchRtDst A match rule based on route destinations.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:RsRtDstAtt A source relation to the route control rule for prefix lists.        ├ rtmap:MatchRtMetric  Match rule based on route metric          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:MatchRtNh A match rule based on route next hops.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:RsRtNhAtt A source relation to the route control rule for prefix lists.        ├ rtmap:MatchRtPervasive A match rule based on pervasive routes.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:MatchRtSrc A match rule based on route sources.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:RsRtSrcAtt A source relation to the route control rule for prefix lists.        ├ rtmap:MatchRtTag A match rule based on route tag.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:MatchRtType A match rule based on route types.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetASPath  Set rule based on AS Path          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:SetASPathASN  List of AS Path ASNs        ├ rtmap:SetDampeningCtrl  Set rule for route-dampening          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetExtComm A set rule based on generic extended communities.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:SetCommItem A list of community values.        ├ rtmap:SetMetric A set rule based on metric.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetMetricType           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetNh A set rule based on next hop.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetOspfFwdAddr A set rule based on an OSPF forwarding address.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetOspfNssa A set rule based on ospf-nssa.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetPathSelect  Set rule based on path-selection          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetPref A set rule based on preference.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetRegComm A set rule based on regular communities.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:SetCommItem A list of community values.        ├ rtmap:SetRtDist           ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetRtTag A set rule based on route tag.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetRttComm A set rule based on route targets communities.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ rtmap:SetCommItem A list of community values.        ├ rtmap:SetVnid  Set rule based on Vnid          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtmap:SetWeight A set rule based on weight.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ rtpfx:Rule A route control rule for prefix lists.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ rtpfx:Entry A prefix list entry definition.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ rtpfx:RtRtDstAtt A target relation to a list of prefix list rules.      ├ rtpfx:RtRtNhAtt A target relation to a list of prefix list rules.      ├ rtpfx:RtRtSrcAtt A target relation to a list of prefix list rules.    ├ rtregcom:Rule A route control rule for regular community lists.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ rtregcom:Entry A regular community list entry.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ rtregcom:Item A regular community item.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ rtregcom:RtRegCommAtt A target relation to a route control rule for regular community lists.  ├ rpm:Mmode  Holds dual vrf changes trigger for RPM  ├ satm:Entity The satellite manager entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ satm:DExtCh A discovered extended chassis.    ├ satm:FabP The satellite manager's fabric port representation.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ satm:HostP A satellite manager?s host port representation.      ├ satm:RemoteFcot The FCOT definition of the transceiver on the fabric extender.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ satm:RemoteFcotX2 The FCOT definition of an X2 type transceiver on the fabric extender.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)  ├ segrt:Entity  Holds Segment-routing entity information    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ segrt:Inst  This objects hold per Segment-routing instance information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ segrt:Mpls  MPLS Segment Routing Instance Block        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ segrt:Dom  This object holds per domain (vrf) information          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ segrt:DomAf  This object holds per address family Segment-routing information            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ segrt:MplsPrefixSid  MPLS Prefix SID              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ tag:Annotation             ├ tag:Tag           ├ tag:Annotation           ├ tag:Tag         ├ segrt:SrClient  Segment Routing Client details          ├ segrt:SrClientTib  Segment Routing Client's registered TIB        ├ segrt:Srgb  Segment Routing Global Block          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag     ├ tag:Annotation     ├ tag:Tag   ├ sla:Entity  Holds IP SLA control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ sla:Inst  This objects hold per IP SLA instance information. There is only one instance of IP SLA running in the system today      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ sla:OpCont  Holds IP SLA operations information        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ sla:Operation   ├ slowdrain:Entity  Holds slowdrain control plane entity information    ├ slowdrain:Class       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ slowdrain:If   ├ smm:Entity  Holds l3vm entity information    ├ smm:Inst  This objects hold per smm instance information. There is only one instance of smm running in the system today  ├ snmp:Entity SNMP control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ snmp:Inst A container for each SNMP instance.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ snmp:ClientGrp A client group is a group of client IP addresses that allows SNMP access to routers or switches.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ snmp:Client SNMP client information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ snmp:RsCommSecPClientGrpAtt Ignore, removed      ├ snmp:CommSecP A security profile using a community string match for authentication.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ snmp:RsCommToCtxAtt A source relation to the SNMP context used to scope the view of the OIDs.        ├ snmp:RtCommSecPClientGrpAtt Ignore, removed      ├ snmp:Ctx SNMP context information.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ snmp:RtCommToCtxAtt A target relation to the SNMP context used to scope the view of the OIDs.        ├ tag:Annotation         ├ tag:Tag       ├ snmp:UserSecP An authentication profile using user names.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)  ├ span:Acct The SPAN global accounting information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)  ├ span:Entity The SPAN manager control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ span:Db The abstraction of the SPAN database.      ├ span:EpRec The SPAN endpoint resolution records.    ├ span:FltGrp Filter group definitions      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ span:FltEntry         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ span:RtSpanSrcToFltGrpAtt       ├ span:RtSpanSsnToFltGrpAtt Cardinality is n-to-1 which is the default    ├ span:Session A local SPAN session is an association of a destination port with source ports. You can monitor incoming or outgoing traffic on a series or range of ports.      ├ aaa:DomainRef A reference to the domain that the parent object belongs to.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ aaa:RtDomainRef The target relation to resolve an RBAC domain.        ├ aaa:RtLSubjToDomainRef         ├ aaa:RtScriptHandlerStateToDomainRef A target relation to a reference to the domain that the parent object belongs.        ├ aaa:RtSessionToDomainRef         ├ aaa:RtTenantToDomainRef         ├ aaa:RtVDevDomainRefContToDomainRef         ├ aaa:RtVDevToDomainRef A target relation to a reference to the domain that the parent object belongs.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ aaa:IDomainRef This object is generated and used only by internal processes.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ span:ERDestination The ERSPAN destination, which is where network traffic is sent for analysis by a network analyzer. When you create a traffic monitoring session, you must select an ERSPAN source and ERSPAN destination. The type of session (Tenant, Access, or Fabric) determines the allowed types of ERSPAN sources and destinations. The destination can be either a remote port or endpoint group. If the destination is a port, it should not be one that has been config...        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ span:FabSource The fabric source port (also called a monitored port), which is a switched port that you monitor for network traffic analysis. In a single local SPAN session, you can monitor source port traffic such as received (Rx), transmitted (Tx), or bidirectional (both). The switch supports any number of source ports (up to the maximum number of available ports on the switch).        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ span:RsSpanSrcToFltGrpAtt .          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ span:RsSpanSrcToL1IfAtt A source relation to an abstraction for a Layer 1 interface in the system.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)      ├ span:LDestination The local SPAN destination, which is where network traffic is sent for analysis by a network analyzer. When you create a traffic monitoring session, you must select an local SPAN source and destination. The type of session (Tenant, Access, or Fabric) determines the allowed types of local SPAN sources and destinations. The destination can be either a port or endpoint group. If the destination is a port, it should not be one that has been configur...        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ span:RsSessionToDomainRef         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ span:RsSpanSsnToFltGrpAtt Cardinality is n-to-1 which is the default        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ span:Source The SPAN or ERSPAN source, which is where traffic is sampled. A source can be an endpoint group (EPG), one or more ports, or port traffic filtered by an EPG (Access SPAN), a Layer 2 bridge domain, or a Layer 3 context (Fabric SPAN). When you create a traffic monitoring session, you must select a source and a destination. The type of session (Tenant, Access, or Fabric) determines the allowed types of sources and destinations. The destination can b...        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ span:RsSpanSrcToFltGrpAtt .          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ span:RsSpanSrcToL1IfAtt A source relation to an abstraction for a Layer 1 interface in the system.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ span:RsSpanSrcToL2CktEpAtt A source relation to the abstraction of a circuit endpoint.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ span:RsSpanSrcToL3OutAtt  Relation to the L3 out          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)  ├ span:RetryCont Span retry information.    ├ span:RetrySrc The retry source information.      ├ span:RetryTarget The retry target information.  ├ statspref:Cont  This objects hold information on stats preferences for various features    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ statspref:Info  This objects hold information on stats preferences for a particular feature  ├ stp:Entity The spanning-tree protocol control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ stp:Inst A container for per spanning-tree protocol (STP) instance information. There is only one instance of STP running in the system.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ stp:If A container for the MCP information that is operated at a interface level.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ nw:RtPathToIf A target relation to the interface information.      ├ stp:Region A container for multiple spanning-tree or MSTP domain information.        ├ stp:MstDom A multiple spanning tree instance.          ├ stp:VlanRange The VLANs belonging to the multiple spanning tree instance.  ├ sts:Entity     ├ sts:Inst       ├ sts:Chain         ├ sts:Stage           ├ sts:VNode             ├ sts:ExtIn               ├ sts:RsExtInFabOutRevAtt               ├ sts:RtFabInExtInAtt               ├ sts:RtFabOutNxtExtInAtt             ├ sts:ExtOut               ├ sts:RsExtOutFabOutAtt               ├ sts:RtFabInRevExtOutAtt               ├ sts:RtFabOutRevPrevExtOutAtt             ├ sts:FabIn               ├ sts:RsFabInExtInAtt               ├ sts:Tap             ├ sts:FabInRev               ├ sts:RsFabInRevExtOutAtt             ├ sts:FabOut               ├ sts:RsFabOutNxtExtInAtt               ├ sts:RtExtOutFabOutAtt               ├ sts:Tap             ├ sts:FabOutRev               ├ sts:RsFabOutRevPrevExtOutAtt               ├ sts:RtExtInFabOutRevAtt             ├ sts:RsNodeAtt             ├ sts:RtToStsVNode       ├ sts:Node         ├ sts:RtNodeAtt   ├ svccopy:Entity  Holds service control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ svccopy:Inst  Holds service instance information      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ svccopy:Dest  Copy dest, represents a destination to which is a copy is sent        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ svccopy:RtCopyDestAtt  Attachment to Copy Destination        ├ vns:SvcCopyCons       ├ svccopy:DestGrp  Copy destination group, represents a group of copy analysers/destinations        ├ svccopy:RsCopyDestAtt  Attachment to Copy Destination        ├ svccopy:RtToCopyDestGrp  Relationship to the copy service object  ├ svcredir:Entity  Holds service control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ svcredir:Inst  Holds service instance information      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ svcredir:Dest  Redirect dest, represents a destination service        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ svcredir:RsHealthGrpAtt  Relationship to the healthgroup object          ├ svcredir:HgAttCons         ├ svcredir:RtBackupDestAtt  Attachment to Redirect Destination        ├ svcredir:RtDestAtt  Attachment to Redirect Destination        ├ vns:SvcRedirCons       ├ svcredir:DestGrp  Redirect destination group, represents a service node group        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ svcredir:RsBackupDestAtt  Attachment to Redirect Destination          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ svcredir:RsDestAtt  Attachment to Redirect Destination          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ svcredir:RtToRedirDestGrp  Relationship to the service object for pbr redirection      ├ svcredir:Destmon  Redirect dest monitoring, represents a destination service monitroring        ├ svcredir:EpPRedirPolCons  EpPRedirPol Consumer, represents the EpPRedirPol which uses the destmon      ├ svcredir:EcmpBucket  Redirect destination group, represents a service node group        ├ vns:SvcRedirEcmpBucketCons       ├ svcredir:HealthGrp  Redirect dest, represents a healthgroup information        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ svcredir:HealthGrpDest  Redirect dest, represents a unique destination          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ svcredir:DestCons  EpPRedirPol Consumer, represents the EpPRedirPol which uses the destmon        ├ svcredir:RtHealthGrpAtt  Relationship to the healthgroup object  ├ synthetic:SwTLTestObj     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ synthetic:CTestObj       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ synthetic:RtToAObj  @faultExplanation This is a custom explanation for a relation fault. @faultRecommendedAction This is a custom recommended action for a relation fault      ├ synthetic:RtToObj     ├ synthetic:RtToAObj  @faultExplanation This is a custom explanation for a relation fault. @faultRecommendedAction This is a custom recommended action for a relation fault    ├ synthetic:RtToObj     ├ synthetic:SwCTestObj       ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ synthetic:RsToAObj  @faultExplanation This is a custom explanation for a relation fault. @faultRecommendedAction This is a custom recommended action for a relation fault        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ synthetic:RsToObj         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ tag:Annotation         ├ tag:Tag       ├ synthetic:RtToAObj  @faultExplanation This is a custom explanation for a relation fault. @faultRecommendedAction This is a custom recommended action for a relation fault      ├ synthetic:RtToObj       ├ tag:Annotation       ├ tag:Tag     ├ tag:Annotation     ├ tag:Tag   ├ sysdebug:CoreFileRepository     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ sysdebug:Core       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ sysfile:Mutation     ├ sysfile:Mutation   ├ sysdebug:Ep     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ sysdebug:LogControlEp       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ sysdebug:LogControlDomain         ├ sysdebug:LogControlDestinationFile         ├ sysdebug:LogControlDestinationSyslog         ├ sysdebug:LogControlModule   ├ sysdebug:TechSupFileRepository     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ sysdebug:TechSupport       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ sysdebug:TechSupportCmdOpt   ├ syslog:Acct   ├ sysmgr:Entity Contains system manager control plane entity information.    ├ sysmgr:SysSt Represents the system state.      ├ sysmgr:FwSt Represents the firmware state.      ├ sysmgr:SupSt Represents the state of the supervisor.    ├ sysmgrp:Cores Represents a container for a cores policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ telemetry:CapabilityCont     ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ telemetry:Capability   ├ telemetry:Entity   ├ telemetry:Inst     ├ telemetry:LogServer       ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ tag:Annotation       ├ tag:Tag     ├ telemetry:StatsServer       ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ tag:Annotation       ├ tag:Tag   ├ top:RsMonPolSystemPolCons A source relation to the monitoring policy consumed by this node.  ├ top:RsNeighFw A source relation to the firmware version.  ├ top:RsProtGFw A source relation to the firmware version.  ├ top:RsSysBfdIpv4PolCons  Relationship with the bfd ipv4 instance policy consumed by this node  ├ top:RsSysBfdIpv6PolCons  Relationship with the bfd ipv6 instance policy consumed by this node  ├ top:RsSysCdpInstPolCons  Relationship with the cdp instance policy consumed by this node  ├ top:RsSysErrDisRecoverPolCons  Relationship with the Error Disable Recovery policy consumed by this node  ├ top:RsSysFastLinkFailoverInstPolCons  Relationship with the fast link failover policy consumed by this node  ├ top:RsSysFcFabricPolCons  Relationship with the fiber channel fabric policy consumed by this node  ├ top:RsSysFcInstPolCons  Relationship with the fiber channel instance policy consumed by this node  ├ top:RsSysFlashConfigPolCons  Relationship with the flash config policy consumed by this node  ├ top:RsSysFwdScaleProfPolCons  Relationship with the forwarding scale profile policy consumed by this node  ├ top:RsSysIaclProfilePolCons  Relationship with the copp iacl instance policy consumed by this node  ├ top:RsSysL2NodePolAuthCons  Relationship to 802.1x policy consumed by this node  ├ top:RsSysLldpInstPolCons  Relationship with the lldp instance policy consumed by this node  ├ top:RsSysMcpInstPolCons  Relationship with the mcp instance policy consumed by this node  ├ top:RsSysMstInstPolCons  Relationship with the stp instance policy consumed by this node  ├ top:RsSysNetflowNodePolCons  Relationship with the Netflow Node policy consumed by this node  ├ top:RsSysPoeInstPolCons  Relationship with the poe instance policy consumed by this node  ├ top:RsSysPsuInstPolCons  Relationship with the psu instance policy consumed by this node  ├ top:RsSystemRack A source relation to the rack identifier where the node is located.  ├ top:RtExporterToTopSystem  Points to the TopSystem on the leaf. This relation exists only on PE  ├ top:RtFwinstlsrc A target relation to the system health.  ├ top:RtTrDst A target relation to the system health.  ├ top:RtTrSrc A target relation to the system health.  ├ top:RtTsSrc A target relation to the system health.  ├ topoctrl:Entity A container for the topology control policy.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ topoctrl:EndpointControlP  Fabric endpoint controle policy      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ topoctrl:EndpointDebugControlP  Endpoint debug control policy      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ topoctrl:FabricDbgCtrl  Fabric Debug Control policy      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ topoctrl:FastLinkFailover  Information about Forwarding Scale Profile to be used      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ topoctrl:FwdScaleProf  Information about Forwarding Scale Profile to be used      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ topoctrl:HashP  user defined hash policy for load balancing in the fabric      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ topoctrl:IDP  Concrete Mo for IDDef This mo is duplicating properties from infra:IDef    ├ topoctrl:LbP A fabric load balance policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ topoctrl:LoopProtectP The endpoint loop protection policy, which specifies how loops detected by frequent mac moves are handled.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ topoctrl:RsEpLoopProtectPolCons The source relation to the loop protection policy.    ├ topoctrl:SecurityToken  Concrete Mo to Holds the internal fabric security token (for various protocols - coop, isis) Parallel to uni/fabric/SecurityToken      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ topoctrl:ShardRdnP The shard redundancy policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ topoctrl:TrackEqptFabP       ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag       ├ topoctrl:PortTrackIf  Port Tracking interface block        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag     ├ topoctrl:VirtDom The virtual domain.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ topoctrl:EncapBlk The encap blocks.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ tag:Annotation         ├ tag:Tag     ├ topoctrl:VxlanP The fabric VXLAN policy.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ track:Entity  Holds object tracking entity information    ├ track:Inst  This objects holds OTM instance information.      ├ fv:IdTracker       ├ track:Object  This object represents object of track. The object tracking monitors the status of the tracked objects and communicates any changes made to interested clients. Each tracked object is identified by a unique number (track:Object.id) that clients can use to configure the action to take when a tracked object changes state. Object types that can b...        ├ track:IpSla  IP SLA track object. Object tracking of IP SLAs operations allow clients to track the output from IP SLAs objects and use this information to trigger an action. Two aspects of IP SLAs can be tracked: state and reachability. For state, if the return code is OK, then the track state is UP; if the return code is not OK, then the track state is...        ├ track:List An object track list allows User to track the combined states of multiple objects. Object track lists support the following capabilities: * Boolean "and" function: Each object defined within the track list must be in an UP state so that the track list object can become UP. track:List.type should be specified as 'and' * Boolea...          ├ track:Member  track list member objects, object-id is a naming property here  ├ tunnel:If A tunnel interface.    ├ ac:LatencyAvg Average Latency Data.    ├ ac:LatencyHist  MO containing histogram data for latency    ├ eltm:TnnlIf     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ fv:DEp A dynamically-learned endpoint on the switch.      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.    ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.      ├ fv:RsLNode A source relation to the logical node. This is an internal object.      ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.      ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.      ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ health:Inst A base class for a health score instance.(Switch only)    ├ nw:RtPathToIf A target relation to the interface information.    ├ opflex:IDEp This is generated and used only by internal processes.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:IDEpToEpDefRef  IDEpToEpDefRef represents an object that links IDEp to corresponding EpDef      ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.        ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToNic         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RsToVm         ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.      ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.      ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.      ├ fv:VDEp A virtual datacenter endpoint.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.          ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToNic           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsToVm           ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.        ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.        ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.        ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:EncapCont         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ opflex:PathAtt           ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ fv:VDEp A virtual datacenter endpoint.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.              ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToNic               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsToVm               ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.            ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.            ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.            ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.            ├ health:Inst A base class for a health score instance.(Switch only)          ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpCntr This is generated and used only by internal processes.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:IDEpEpPDRef  EpPD ref under the IDEp      ├ opflex:IDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:IDEpLabel       ├ opflex:IDEpScopeCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ opflex:IDEpScope           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:Ip  Represents IP address        ├ opflexp:L3EpIDEpRef  Hack to inform opflexElem to clean up the IP from IDEp      ├ opflex:PathAtt         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fv:VDEp A virtual datacenter endpoint.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ fv:RsHyper A source relation to the hypervisor that controls and monitors the APIC VMs. This is an internal object.            ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToNic             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsToVm             ├ fv:ReportingNode The node reporting a corresponding endpoint. This enables a user to see on which nodes the endpoints are present. This is an internally created object.          ├ fv:RsVNode A source relation to an opflex-capable virtual node that is connected to the fabric. This is an internal object.          ├ fv:RtDestToVPort A target relation to an endpoint. This is an internal object.          ├ fv:RtSrcToVPort A target relation to a set of endpoints. This is an internal object.          ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:RsHpp       ├ opflex:RtIDEp       ├ opflex:RtODevToIDEp       ├ opflex:RtODevToTunnelIDEp       ├ opflexp:AgentIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmIDEpFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)    ├ opflex:ODev This is generated and used only by internal processes.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ fv:HvNic  MO used to pass the HV/SVM Mac to Ctrlr for AVE and AVS        ├ fv:RsHvNicToCtrlr  Relation to the controller in the IFC to pull the contents down to the leaf        ├ fv:RsHvNicToLocale       ├ fv:VNode An opflex-capable virtual node that is connected to the fabric.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:RsHostprotPol  Relation to hostprot policies used by this device.        ├ fv:RsLNode A source relation to the logical node. This is an internal object.        ├ fv:RsOpflexHv  Relation to the hypervisor in the IFC for UI display purposes. Use the new realtion VNodeToHv. This exists for backward compatibility.        ├ fv:RsVNodeToHv  Relation to the hypervisor in the IFC for UI display purposes This is needed for stats as multiple ODevs can point to the same Hv.        ├ fv:RtVNode A target relation to the VNode that contains the endpoint. This is an internal object.        ├ health:Inst A base class for a health score instance.(Switch only)      ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:ODevCap This is generated and used only by internal processes.      ├ opflex:ODevCliCmdCont         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ODevCliCmdSession           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ opflex:ODevCliCmdReq             ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ opflex:ODevCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ opflexp:AveCliCmdResp               ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ tag:Annotation             ├ tag:Tag           ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:ODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflex:OPNic         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ opflex:ONic           ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ tag:Annotation         ├ tag:Tag       ├ opflex:OVm         ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ opflex:RsODevToIDEp       ├ opflex:RsODevToTunnelIDEp       ├ opflex:RtTsODev  Relation to source fabric node      ├ opflexp:AgentODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ opflexp:VmmODevFaultInfo         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag     ├ tunnel:Bank A bank. Each port interface under tunnel has two sets of banks for counting the packets and bytes. This object is for statistics only.      ├ tunnel:EgrTep An egress tunnel endpoint counter.      ├ tunnel:IngrTep An ingress tunnel endpoint counter.    ├ tunnel:Cons  tunnel:Cons: Used for reference counting the consumers responsible for creation of this tunnel      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tunnel:PortIf A port interface. This object is for stats purposes only. The tunnel stats on a given physical port are counted. These port objects will be created by default wherever the tunnel can exit out. For example, all north bound tunnels will have the fabric ports created under it.      ├ tunnel:Bank A bank. Each port interface under tunnel has two sets of banks for counting the packets and bytes. This object is for statistics only.        ├ tunnel:EgrTep An egress tunnel endpoint counter.        ├ tunnel:IngrTep An ingress tunnel endpoint counter.    ├ tunnel:RsTunnelMbrIfs A source relation to a layer 1 physical Ethernet interface. Note that this relation is an internal object.    ├ tunnel:RsTunnelToLooseNode A source relation to an external connected node (i.e. blade switch). Note that this relation is an internal object.  ├ twamp:Entity  Holds TWAMP control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ twamp:ConnCont       ├ twamp:Connection     ├ twamp:ResponderInst  This object holds TWAMP Responder Configuration      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ twamp:RsResponderPolCons     ├ twamp:ResponderStandard     ├ twamp:ServerInst  This object holds TWAMP Server Configuration      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ twamp:RsServerPolCons     ├ twamp:ServerStandard     ├ twamp:SessionCont       ├ twamp:Session   ├ udld:Entity  Holds udld control plane entity information    ├ udld:Inst  This objects hold per udld instance information. There is only one instance of udld running in the system today      ├ udld:If  This object holds udld information that is operated at a interface level        ├ l2:RsEthIf A source relation to an L1 interface. This is an internal object.        ├ l2:RsMgmtIf  Association to the corresponding mgmt::MgmtIf        ├ nw:RtPathToIf A target relation to the interface information.        ├ udld:AdjEp  This object holds udld neighbor information  ├ unifiedports:Entity  Container for Unified Port type information objects    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ unifiedports:If  Holds Unified Port type information      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ nw:RtPathToIf A target relation to the interface information.  ├ uribv4:Entity A container that holds entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ uribv4:Dom The domain (VRF) information.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ uribv4:Db An IPv4 unicast route information base database.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ health:Inst A base class for a health score instance.(Switch only)        ├ uribv4:Route A route.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ health:Inst A base class for a health score instance.(Switch only)          ├ uribv4:Nexthop A URIB next hop database record.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ uribv4:MplsNexthop  Mpls Nexthop            ├ uribv4:RtRouteOwnerToNexthopAtt A target relation to a URIB next-hop database record.          ├ uribv4:RouteOwner A URIB route ownership record.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ health:Inst A base class for a health score instance.(Switch only)            ├ uribv4:Nexthop A URIB next hop database record.              ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.              ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.                ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility                ├ tag:Annotation                 ├ tag:Tag               ├ health:Inst A base class for a health score instance.(Switch only)              ├ uribv4:MplsNexthop  Mpls Nexthop              ├ uribv4:RtRouteOwnerToNexthopAtt A target relation to a URIB next-hop database record.            ├ uribv4:RsRouteOwnerToNexthopAtt A source relation to a URIB next hop database record.  ├ uribv6:Entity  Entity information    ├ uribv6:Dom  Domain (vrf) information      ├ uribv6:Db         ├ uribv6:Route  Route          ├ uribv6:Nexthop  URIB next-hop database record          ├ uribv6:RouteOwner  URIB route ownership record            ├ rib:RsRouteOwnerToNexthopAtt             ├ uribv6:Nexthop  URIB next-hop database record  ├ usrcallhome:Record     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ usrsyslog:Record     ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ veth:Entity  Container for Virtual Ethernet Ports    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ veth:Inst  This object represents whether the NIV feature is enabled/disabled on the node      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ l1:VethIf  Virtual Ethernet Port Config        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ fv:DomDef The domain information.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fv:RsDomDefNs A source relation to the VxLAN namespace policy definition. This is an internal object.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ fv:RsDomDefNsLocal A source relation to the VxLAN namespace policy definition. This is an internal object.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)            ├ tag:Annotation             ├ tag:Tag           ├ fv:RtToDomDef A target relation to the domain definition. This is an internal object.          ├ fv:RtToFvDomDef           ├ health:Inst A base class for a health score instance.(Switch only)        ├ health:Inst A base class for a health score instance.(Switch only)        ├ l1:PrioFlowCtrlP  MO for slow-drain policy and PFC mode. This is a child policy of if.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l1:RsAttEntityPCons         ├ l1:RsCdpIfPolCons A source relation to CDP interface policy parameters. Note that this relation is an internal object.        ├ l1:RsCeMonitorPolCons         ├ l1:RsCoppIfPolCons  Relationship with the coppIf policy consumed by this physical interface        ├ l1:RsDwdmFabIfPolCons         ├ l1:RsDwdmIfPolCons         ├ l1:RsFIfPolCons  Relationship with the FIfPol policy consumed by this physical interface        ├ l1:RsFcIfPolCons  Relationship with the fcIfPol policy consumed by this physical interface        ├ l1:RsHIfPolCons A source relation to the host interface policy. Note that this relation is an internal object.        ├ l1:RsIpv4MonitorPolCons  Relationship with the Monitor policy consumed by this physical interface        ├ l1:RsIpv6MonitorPolCons         ├ l1:RsL2IfPolCons         ├ l1:RsL2PortAuthCons  Relationship with the Port Authentication policy consumed by this physical interface        ├ l1:RsL2PortSecurityCons  Relationship with the Port Security policy consumed by this physical interface        ├ l1:RsL3IfPolCons  Relationship with the L3 interface policy consumed by this physical interface        ├ l1:RsLacpIfPolCons A source relation to the port-Level LACP member policy. Note that this relation is an internal object.        ├ l1:RsLinkFlapPolCons         ├ l1:RsLldpIfPolCons A source relation to the LLDP policy parameters for the interface. Note that this relation is an internal object.        ├ l1:RsMacsecFabPolCons         ├ l1:RsMacsecPolCons  Relationship with the cdp/lacp/lldp if policy consumed by this physical interface        ├ l1:RsMcpIfPolCons         ├ l1:RsMonPolIfPolCons A source relation to the base monitoring policy model. Note that this relation is an internal object.        ├ l1:RsPoeIfPolCons  Relationship with the poe policy consumed by this physical interface        ├ l1:RsQosEgressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Egress        ├ l1:RsQosIngressDppIfPolCons  Relationship with the qosDppPol consumed by the physical interface in Ingress        ├ l1:RsQosPfcIfPolCons  Relationship with the qosPfcPol policy consumed by this physical interface        ├ l1:RsQosSdIfPolCons  Relationship with the SdIfPol policy consumed by this physical interface        ├ l1:RsStormctrlIfPolCons         ├ l1:RsStpIfPolCons A source relation to the Spanning-Tree Protocol (STP) policy. Note that this relation is an internal object.        ├ l1:RtBrConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.        ├ l1:RtEncPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ l1:RtEthIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.        ├ l1:RtExtConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.        ├ l1:RtLabelEpToAllowedEthIf  Associations to the allowed interfaces for the label        ├ l1:RtLabelEpToConsumerEthIf  Associations to the interfaces consuming the label        ├ l1:RtLsNodeToIf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.        ├ l1:RtNodePortAtt A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.        ├ l1:RtPhysRtdConf A target relation to an abstraction of Ethernet interface properties that are common between Ethernet physical and aggregated interfaces. Note that this relation is an internal object.        ├ l1:RtSpanSrcToL1IfAtt A target relation to an abstraction for a layer-1 interface in the system. The properties apply to all types of interfaces. Note that this relation is an internal object.        ├ l1:RtToObservedEthIf         ├ nw:RtPathToIf A target relation to the interface information.  ├ vlanmgr:Entity A container for VLAN manager entity information.    ├ vlanmgr:Inst A container for VLAN manager instance information.      ├ l2:DomMbrIf The layer to the attachment to the bridge interface.  ├ vpc:Entity The vPC control plane entity information.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ vpc:Inst The vPC instance information. There is only one instance of vpc running in the system today.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)      ├ vpc:Dom The vPC domain information. There is only one configurable vPC domain that is in the system.        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)        ├ vpc:AppParams The application parameters.          ├ vpc:AppParamInfo A container for application and parameter information.        ├ vpc:If The vPC interfaces information enables links that are physically connected to two different Fabric devices to appear as a single port channel by a third device. The third device can be a switch, server, or any other networking device that supports port channels. A vPC can provide Layer 2 multipathing, which allows you to create redundancy and increase bisectional bandwidth by enabling multiple parallel paths between nodes and allowing load balanc...          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)          ├ vpc:AppParams The application parameters.            ├ vpc:AppParamInfo A container for application and parameter information.          ├ vpc:RsVpcConf The port-channel.            ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.            ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.              ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility              ├ tag:Annotation               ├ tag:Tag             ├ health:Inst A base class for a health score instance.(Switch only)        ├ vpc:Keepalive The vPC keepalive definitions.          ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.          ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.            ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility            ├ tag:Annotation             ├ tag:Tag           ├ health:Inst A base class for a health score instance.(Switch only)        ├ vpc:RsVpcInstPolCons A source relation to the node-level vPC domain policy.  ├ vsanmgr:Entity  Holds Vsan-mgr control plane entity information    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ vsanmgr:Inst  This objects hold per vsan-mgr instance information. There is only one instance of vsan-mgr running in the system today      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ vsanmgr:VsanMbrIf  VsanMbrIf class  ├ wwn:Entity     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ wwn:Oui       ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ tag:Annotation       ├ tag:Tag