| Constants | 
                                 
                                     | unknown | 0 | Unknown | Unknown | 
                                 
                                     | reboot | 1 | Kernel Reboot | Kernel Reboot | 
                                 
                                     | watchdog | 2 | Watchdog Timeout | Watchdog | 
                                 
                                     | sysmgr | 3 | Reset Requested due to Fatal System Error | Sysmgr reset | 
                                 
                                     | mod-err | 4 | Reset Requested due to Fatal Module Error | NO COMMENTS | 
                                 
                                     | pwr-cfg | 5 | Configured Power down | NO COMMENTS | 
                                 
                                     | temp-alaram | 6 | Power down due to temperature sensor policy trigger | NO COMMENTS | 
                                 
                                     | user-switchover | 7 | Reset triggered due to Switchover Request by User | NO COMMENTS | 
                                 
                                     | upg-err | 8 | Reset Requested due to Fatal Upgrade Error | NO COMMENTS | 
                                 
                                     | reload | 9 | Reset Requested by CLI command reload | NO COMMENTS | 
                                 
                                     | sprom-upd | 10 | Reset Requested due to SPROM update | NO COMMENTS | 
                                 
                                     | sys-cfg-dwn | 11 | System Reset due to Element Manager | NO COMMENTS | 
                                 
                                     | clock | 12 | System Reset due to Clock failure | NO COMMENTS | 
                                 
                                     | halt | 13 | Kernel Halt | NO COMMENTS | 
                                 
                                     | redundancy | 14 | Reset Requested by Redundancy | NO COMMENTS | 
                                 
                                     | ha-switchover | 15 | Reset triggered due to HA policy of Switchover | NO COMMENTS | 
                                 
                                     | ha-reset | 16 | Reset triggered due to HA policy of Reset | NO COMMENTS | 
                                 
                                     | pfm-rtime | 17 | Power down triggered due to Platform manager runtime error | NO COMMENTS | 
                                 
                                     | pfm-power-dwn | 18 | Power down triggered due to Platform manager event | NO COMMENTS | 
                                 
                                     | panic | 19 | Kernel Panic | NO COMMENTS | 
                                 
                                     | mgmt-app | 20 | Reset Requested by management application | NO COMMENTS | 
                                 
                                     | hw | 21 | Reset triggered due to Hardware Error | NO COMMENTS | 
                                 
                                     | asic | 22 | Reset performed due to component Error | NO COMMENTS | 
                                 
                                     | redun-channel | 23 | Reset triggered due to bad redundancy channel | NO COMMENTS | 
                                 
                                     | sys-health | 24 | Reset due to bad HW detected by System Health | NO COMMENTS | 
                                 
                                     | eobc | 25 | Reset triggered due to bad backplane communication channel | NO COMMENTS | 
                                 
                                     | boot-err | 27 | Reset (powered-down) because module does not boot | NO COMMENTS | 
                                 
                                     | no-bootflash | 28 | Reset (powered-down) because there is no bootflash | NO COMMENTS | 
                                 
                                     | netboot-err | 29 | Reset (powered-down) because netboot failed | NO COMMENTS | 
                                 
                                     | bootflash-corrupt | 30 | Reset (powered-down) because bootflash access failed | NO COMMENTS | 
                                 
                                     | installer | 31 | Reset by installer | NO COMMENTS | 
                                 
                                     | epld | 33 | Power Down/UP epld upgrade process | NO COMMENTS | 
                                 
                                     | sigkill-fail | 34 | Reset triggered due to failure to respond to SIGKILL | NO COMMENTS | 
                                 
                                     | sys-gen-fail | 35 | Reset triggered by System Manager for generic failure | NO COMMENTS | 
                                 
                                     | clock-switchover | 37 | VegasLC Reset due to Clock SwitchOver | NO COMMENTS | 
                                 
                                     | insufficient-resource | 38 | Reset (powered-down) because of insufficient resources (DI) | NO COMMENTS | 
                                 
                                     | incompat-config | 43 | Reset (powered-down) because of incompatible configuration | NO COMMENTS | 
                                 
                                     | lcm-unknown | 44 | Unknown reason | lcm reason codes | 
                                 
                                     | lcm-ha-restart | 45 | HA System restart | NO COMMENTS | 
                                 
                                     | lcm-haswitchover-done | 46 | HA-Switchover done | NO COMMENTS | 
                                 
                                     | lcm-boot-srg-timeout | 47 | SRG info response timeout | NO COMMENTS | 
                                 
                                     | lcm-coredump | 48 | Core dump initiation | NO COMMENTS | 
                                 
                                     | lcm-disruptive-upg | 49 | Disruptive upgrade | NO COMMENTS | 
                                 
                                     | lcm-lc-fail | 50 | Line card failure | NO COMMENTS | 
                                 
                                     | lcm-hitless-mod-rem | 51 | Hitless module removal | NO COMMENTS | 
                                 
                                     | lcm-hitless-pwr-dwn | 52 | Hitless power down | NO COMMENTS | 
                                 
                                     | lcm-hitless-proc-notice | 53 | Catastrophic error from LC | NO COMMENTS | 
                                 
                                     | lcm-hitless-reg-fail | 54 | Hitless registration failed | NO COMMENTS | 
                                 
                                     | lcm-hitless-timeout | 55 | Hitless upgrade timeout | NO COMMENTS | 
                                 
                                     | lcm-img-upg-timeout | 56 | Line card image upgrade (failure) | NO COMMENTS | 
                                 
                                     | lcm-img-upgsuccess | 57 | Line card image upgrade (success) | NO COMMENTS | 
                                 
                                     | lcm-lc-ins-seq-fail | 58 | LC insertion sequence failure | NO COMMENTS | 
                                 
                                     | lcm-hitless-upg-fail | 59 | Hitless upgrade failed | NO COMMENTS | 
                                 
                                     | lcm-lc-no-resp | 60 | Line card not responding | NO COMMENTS | 
                                 
                                     | lcm-lc-reg-more3 | 61 | Line card 3+ registration | NO COMMENTS | 
                                 
                                     | lcm-lc-reg-timeout | 62 | Line card registration timeout | NO COMMENTS | 
                                 
                                     | lcm-runtime-diag-fail | 63 | Runtime diagnostic failure | NO COMMENTS | 
                                 
                                     | lcm-runtime-diag-timeout | 64 | Runtime diagnostic timeout | NO COMMENTS | 
                                 
                                     | lcm-seeprom-timeout | 65 | Line card SEEPROM contents response timeout | NO COMMENTS | 
                                 
                                     | lcm-proc-notice | 66 | Line card catastrophic error | NO COMMENTS | 
                                 
                                     | lcm-save-state-fail | 67 | Save state response (failure) | NO COMMENTS | 
                                 
                                     | lcm-hitfull-img-check | 68 | Hitful image compatibility check | NO COMMENTS | 
                                 
                                     | lcm-img-check-pwr-cycle | 69 | Image compatibility check (action:powercycle) | NO COMMENTS | 
                                 
                                     | lcm-img-check-pwr-dwn | 70 | Image compatibility check (action:powerdown) | NO COMMENTS | 
                                 
                                     | lcm-img-check-switch-over | 71 | Switchover : Image compatibility check | NO COMMENTS | 
                                 
                                     | lcm-power-down | 72 | Module is powered down or power cycled | NO COMMENTS | 
                                 
                                     | lcm-sup-rem | 73 | Supervisor card is removed or power cycled | NO COMMENTS | 
                                 
                                     | lcm-lc-rem | 74 | Module is removed | NO COMMENTS | 
                                 
                                     | lcm-unknown-mod | 75 | Unknown line card insertion | NO COMMENTS | 
                                 
                                     | lcm-srg-timeout | 76 | SRG infor response timeout | NO COMMENTS | 
                                 
                                     | lcm-async-notice-fail | 77 | Stop async notice failed | NO COMMENTS | 
                                 
                                     | lcm-switchover-fail | 78 | Switchover failed | NO COMMENTS | 
                                 
                                     | lcm-timeout | 79 | Addon image response timeout | NO COMMENTS | 
                                 
                                     | lcm-srg-incompat | 80 | Upgraded SRG incompatible | NO COMMENTS | 
                                 
                                     | outofservice | 86 | Out of service | NO COMMENTS | 
                                 
                                     | sup-dev-err | 87 | Supervisor Device Error | NO COMMENTS | 
                                 
                                     | issu-restart | 88 | Reset due to upgrade | NO COMMENTS | 
                                 
                                     | ins-seq-fail-pwr-dwn | 89 | Reset (powered-down) due to insertion sequence failed | NO COMMENTS | 
                                 
                                     | no-sup | 92 | Reset due to no sup | NO COMMENTS | 
                                 
                                     | bad-volt | 93 | Reset due to Bad Voltage | NO COMMENTS | 
                                 
                                     | bad-bus-volt | 94 | Reset due to bad system bus voltage | NO COMMENTS | 
                                 
                                     | bad-intermediate-bus-volt | 95 | Reset due to bad intermediate bus voltage | NO COMMENTS | 
                                 
                                     | psp | 96 | Reset due to CMP | NO COMMENTS | 
                                 
                                     | eem-pwr-dwn | 97 | Powered-down due to EEM event policy trigger | NO COMMENTS | 
                                 
                                     | usd-fail | 98 | Reset due to USD Failure | NO COMMENTS | 
                                 
                                     | ejector | 99 | All the ejectors are OPEN | NO COMMENTS | 
                                 
                                     | sys-rst | 100 | System reset by active sup (by writing to PMFPGA regs) | NO COMMENTS | 
                                 
                                     | push-button | 101 | linecard reset by push button | NO COMMENTS | 
                                 
                                     | policy-reset | 103 | Policy trigger initiated reset: | NO COMMENTS | 
                                 
                                     | policy-fan | 104 | Powered-down due to fan policy trigger | NO COMMENTS | 
                                 
                                     | chassis-rst | 105 | Chassis reset by Sup | NO COMMENTS | 
                                 
                                     | max-switchover | 107 | Reset (powered-down) since maximum number of swovers were exceeded | NO COMMENTS | 
                                 
                                     | switchover-timeout | 108 | Reset since switchover timeout | NO COMMENTS | 
                                 
                                     | sysmgr-timeout | 109 | Reset of standby by active sup due to sysmgr timeout | NO COMMENTS | 
                                 
                                     | unknown-mod | 110 | Unsupported/Unknown Module | NO COMMENTS | 
                                 
                                     | mod-fail | 111 | Module Failed | NO COMMENTS | 
                                 
                                     | mod-pwr-cycle | 112 | Module PowerCycled | NO COMMENTS | 
                                 
                                     | card-incompat | 113 | Module not supported in this chassis | NO COMMENTS | 
                                 
                                     | idprom-err | 114 | Bootup error accessing module IDPROM | NO COMMENTS | 
                                 
                                     | unspecified | 115 | Non-specific deadend error, check platform int error | NO COMMENTS | 
                                 
                                     | no-plugin | 117 | plugin absent/ not loaded | NO COMMENTS | 
                                 
                                     | sw-card-id-unknown | 118 | Unknown card (Could not get software-card-id) | NO COMMENTS | 
                                 
                                     | mod-fail-pwr-up | 119 | Unable to power up card (Power-OK not set) | NO COMMENTS | 
                                 
                                     | max-bring-up-exceed | 120 | failure(powered-down) since maximum number of bringups were exceeded | NO COMMENTS | 
                                 
                                     | epld-upg-nw-crd-mode | 125 | Power Down/UP epld upgrade process | NO COMMENTS | 
                                 
                                     | deep-sleep | 126 | Preparing to enter deep sleep mode | NO COMMENTS | 
                                 
                                     | epc-fail | 130 | EPC failure | NO COMMENTS | 
                                 
                                     | klm-fail | 131 | KLM load failure | NO COMMENTS | 
                                 
                                     | dme-clean-config-reset | 132 | Dme clean config reset | NO COMMENTS | 
                                 
                                     | last-fc-down | 133 | Reloading linecard on removal of last fabric card | NO COMMENTS | 
                                 
                                     | decommissioned | 134 | Decommissioned | NO COMMENTS | 
                                 
                                     | last-sc-down | 136 | Reloading linecard and fabric card on removal of last SC | NO COMMENTS | 
                                 
                                     | ssd-firmware-upgrade | 139 | System power-cycled due to SSD firmware upgrade | NO COMMENTS | 
                                 
                                     | cold-boot | 140 | System power-cycled due to cold boot | NO COMMENTS | 
                                 
                                     | DEFAULT | 0 | --- | Reset reason |