Properties Summary |
Defined in: dpp:EgrAllow |
scalar:Uint64
|
bytesAvg (dpp:EgrAllow:bytesAvg)
Egress Policer Allowed Bytes. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
bytesBase (dpp:EgrAllow:bytesBase)
Egress Policer Allowed Bytes. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint64
|
bytesCum (dpp:EgrAllow:bytesCum)
Egress Policer Allowed Bytes. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint64
|
bytesLast (dpp:EgrAllow:bytesLast)
Egress Policer Allowed Bytes. This is the most current value read by the counter.
|
scalar:Uint64
|
bytesMax (dpp:EgrAllow:bytesMax)
Egress Policer Allowed Bytes. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
bytesMin (dpp:EgrAllow:bytesMin)
Egress Policer Allowed Bytes. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
bytesPer (dpp:EgrAllow:bytesPer)
Egress Policer Allowed Bytes. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
bytesRate (dpp:EgrAllow:bytesRate)
Egress Policer Allowed Bytes. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
bytesRateAvg (dpp:EgrAllow:bytesRateAvg)
Egress Policer Allowed Bytes rate. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
bytesRateLast (dpp:EgrAllow:bytesRateLast)
Egress Policer Allowed Bytes rate. This is the most current value read by the counter.
|
scalar:Double
|
bytesRateMax (dpp:EgrAllow:bytesRateMax)
Egress Policer Allowed Bytes rate. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
bytesRateMin (dpp:EgrAllow:bytesRateMin)
Egress Policer Allowed Bytes rate. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
bytesRateSpct (dpp:EgrAllow:bytesRateSpct)
Egress Policer Allowed Bytes rate. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
bytesRateThr (dpp:EgrAllow:bytesRateThr)
Egress Policer Allowed Bytes rate. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Double
|
bytesRateTr (dpp:EgrAllow:bytesRateTr)
Egress Policer Allowed Bytes rate. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
bytesRateTrBase (dpp:EgrAllow:bytesRateTrBase)
Egress Policer Allowed Bytes rate. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Double
|
bytesRateTtl (dpp:EgrAllow:bytesRateTtl)
Egress Policer Allowed Bytes rate. This is the total sum of all values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
bytesSpct (dpp:EgrAllow:bytesSpct)
Egress Policer Allowed Bytes. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
bytesThr (dpp:EgrAllow:bytesThr)
Egress Policer Allowed Bytes. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint64
|
bytesTr (dpp:EgrAllow:bytesTr)
Egress Policer Allowed Bytes. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
bytesTrBase (dpp:EgrAllow:bytesTrBase)
Egress Policer Allowed Bytes. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Uint64
|
pktsAvg (dpp:EgrAllow:pktsAvg)
Egress Policer Allowed Packets. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
pktsBase (dpp:EgrAllow:pktsBase)
Egress Policer Allowed Packets. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
|
scalar:Uint64
|
pktsCum (dpp:EgrAllow:pktsCum)
Egress Policer Allowed Packets. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
|
scalar:Uint64
|
pktsLast (dpp:EgrAllow:pktsLast)
Egress Policer Allowed Packets. This is the most current value read by the counter.
|
scalar:Uint64
|
pktsMax (dpp:EgrAllow:pktsMax)
Egress Policer Allowed Packets. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
pktsMin (dpp:EgrAllow:pktsMin)
Egress Policer Allowed Packets. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
pktsPer (dpp:EgrAllow:pktsPer)
Egress Policer Allowed Packets. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
pktsRate (dpp:EgrAllow:pktsRate)
Egress Policer Allowed Packets. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
pktsRateAvg (dpp:EgrAllow:pktsRateAvg)
Egress Policer Allowed Packets rate. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
pktsRateLast (dpp:EgrAllow:pktsRateLast)
Egress Policer Allowed Packets rate. This is the most current value read by the counter.
|
scalar:Double
|
pktsRateMax (dpp:EgrAllow:pktsRateMax)
Egress Policer Allowed Packets rate. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
pktsRateMin (dpp:EgrAllow:pktsRateMin)
Egress Policer Allowed Packets rate. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
pktsRateSpct (dpp:EgrAllow:pktsRateSpct)
Egress Policer Allowed Packets rate. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
pktsRateThr (dpp:EgrAllow:pktsRateThr)
Egress Policer Allowed Packets rate. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Double
|
pktsRateTr (dpp:EgrAllow:pktsRateTr)
Egress Policer Allowed Packets rate. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Double
|
pktsRateTrBase (dpp:EgrAllow:pktsRateTrBase)
Egress Policer Allowed Packets rate. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
scalar:Double
|
pktsRateTtl (dpp:EgrAllow:pktsRateTtl)
Egress Policer Allowed Packets rate. This is the total sum of all values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint16
|
pktsSpct (dpp:EgrAllow:pktsSpct)
Egress Policer Allowed Packets. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
|
stats:ThresholdedMask
scalar:Bitmask64
|
pktsThr (dpp:EgrAllow:pktsThr)
Egress Policer Allowed Packets. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
|
scalar:Sint64
|
pktsTr (dpp:EgrAllow:pktsTr)
Egress Policer Allowed Packets. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
|
scalar:Uint64
|
pktsTrBase (dpp:EgrAllow:pktsTrBase)
Egress Policer Allowed Packets. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
|
bytesAvg
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Egress Policer Allowed Bytes. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
bytesBase
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
Egress Policer Allowed Bytes. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
bytesCum
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
Egress Policer Allowed Bytes. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
bytesLast
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Egress Policer Allowed Bytes. This is the most current value read by the counter.
bytesMax
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Egress Policer Allowed Bytes. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
bytesMin
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Egress Policer Allowed Bytes. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
bytesPer
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
Egress Policer Allowed Bytes. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
bytesRate
Type: scalar:Double
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
Egress Policer Allowed Bytes. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
bytesRateAvg
Type: scalar:Double
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Egress Policer Allowed Bytes rate. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
bytesRateLast
Type: scalar:Double
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Egress Policer Allowed Bytes rate. This is the most current value read by the counter.
bytesRateMax
Type: scalar:Double
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Egress Policer Allowed Bytes rate. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
bytesRateMin
Type: scalar:Double
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Egress Policer Allowed Bytes rate. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
bytesRateSpct
Type: scalar:Uint16
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Egress Policer Allowed Bytes rate. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
bytesRateThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Egress Policer Allowed Bytes rate. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
bytesRateTr
Type: scalar:Double
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Egress Policer Allowed Bytes rate. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
bytesRateTrBase
Type: scalar:Double
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Egress Policer Allowed Bytes rate. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
bytesRateTtl
Type: scalar:Double
Units: bytes-per-second
Encrypted: false
Access: oper
Category: ImplicitTotal
Comments:
-
Egress Policer Allowed Bytes rate. This is the total sum of all values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
bytesSpct
Type: scalar:Uint16
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Egress Policer Allowed Bytes. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
bytesThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Egress Policer Allowed Bytes. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
bytesTr
Type: scalar:Sint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Egress Policer Allowed Bytes. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
bytesTrBase
Type: scalar:Uint64
Units: bytes
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Egress Policer Allowed Bytes. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
childAction
Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Comments:
-
Delete or ignore. For internal use only.
| |
Constants |
deleteAll |
16384u |
deleteAll |
NO COMMENTS
|
ignore |
4096u |
ignore |
NO COMMENTS
|
deleteNonPresent |
8192u |
deleteNonPresent |
NO COMMENTS
|
DEFAULT |
0 |
--- |
This type is used to
|
|
cnt
Type: scalar:Uint16
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The number of readings made within the current sample.
dn
Type: reference:BinRef
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Comments:
-
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
lastCollOffset
Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
modTs
Type: mo:TStamp
Primitive Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
The time when this object was last modified.
| |
Constants |
never |
0ull |
never |
NO COMMENTS
|
DEFAULT |
never(0ull) |
never |
NO COMMENTS
|
|
pktsAvg
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Egress Policer Allowed Packets. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
pktsBase
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitBaseline
Comments:
-
Egress Policer Allowed Packets. This is the cumulative value of the counter after the last reset of the hardware counter. Note that this value continues through each interval without resetting to zero. Used for internal purposes.
pktsCum
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitCumulative
Comments:
-
Egress Policer Allowed Packets. The total sum of the values read. Note that this value continues through each interval without resetting to zero.
pktsLast
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Egress Policer Allowed Packets. This is the most current value read by the counter.
pktsMax
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Egress Policer Allowed Packets. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
pktsMin
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Egress Policer Allowed Packets. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
pktsPer
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitPeriodic
Comments:
-
Egress Policer Allowed Packets. The total sum of the values read during the collection interval. Note that this value resets to 0 at the beginning of each interval.
pktsRate
Type: scalar:Double
Units: packets
Encrypted: false
Access: oper
Category: ImplicitRate
Comments:
-
Egress Policer Allowed Packets. This is the rate of the counter during the collection interval. The rate is calculated by dividing the periodic value by the length of the collection interval. Note that this value resets to 0 at the beginning of each interval.
pktsRateAvg
Type: scalar:Double
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitAvg
Comments:
-
Egress Policer Allowed Packets rate. This is the average value read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
pktsRateLast
Type: scalar:Double
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitLastReading
Comments:
-
Egress Policer Allowed Packets rate. This is the most current value read by the counter.
pktsRateMax
Type: scalar:Double
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitMax
Comments:
-
Egress Policer Allowed Packets rate. This is the largest value read by the counter during the collection interval. This value is only overwritten if the most current value is larger than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 4, the previous value is overwritten with 4. If the third reading is smaller than 4, the value remains at 4. Note that this value resets to 0 at the beginning of each interval.
pktsRateMin
Type: scalar:Double
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitMin
Comments:
-
Egress Policer Allowed Packets rate. This is the smallest value read by the counter during the collection interval. This value is only overwritten if the most current value is smaller than the previous value. For example, if the value of the first reading is 3 and the value of the second reading is 2, the previous value is overwritten with 2. If the third reading is larger than 2, the value remains at 2. Note that this value resets to 0 at the beginning of each interval.
pktsRateSpct
Type: scalar:Uint16
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Egress Policer Allowed Packets rate. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
pktsRateThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Egress Policer Allowed Packets rate. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
pktsRateTr
Type: scalar:Double
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Egress Policer Allowed Packets rate. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
pktsRateTrBase
Type: scalar:Double
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Egress Policer Allowed Packets rate. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
pktsRateTtl
Type: scalar:Double
Units: packets-per-second
Encrypted: false
Access: oper
Category: ImplicitTotal
Comments:
-
Egress Policer Allowed Packets rate. This is the total sum of all values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
pktsSpct
Type: scalar:Uint16
Units: packets
Encrypted: false
Access: oper
Category: ImplicitSuspect
Comments:
-
Egress Policer Allowed Packets. This is the number of missed and/or incorrect values read by the counter during the collection interval. Note that this value resets to 0 at the beginning of each interval.
pktsThr
Type: stats:ThresholdedMask
Primitive Type: scalar:Bitmask64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitThresholded
Comments:
-
Egress Policer Allowed Packets. This indicates the properties of the counter that crossed the threshold during the collection interval. Note that this value resets at the beginning of each interval.
| |
Constants |
unspecified |
0ull |
--- |
NO COMMENTS
|
cumulativeWarn |
1024ull |
cumulative severity warning |
NO COMMENTS
|
periodicCrit |
1048576ull |
periodic severity critical |
NO COMMENTS
|
maxLow |
1073741824ull |
max crossed low threshold |
NO COMMENTS
|
avgMajor |
1099511627776ull |
avg severity major |
NO COMMENTS
|
rateHigh |
1125899906842624ull |
rate crossed high threshold |
NO COMMENTS
|
cumulativeRecovering |
128ull |
cumulative recovering |
NO COMMENTS
|
periodicWarn |
131072ull |
periodic severity warning |
NO COMMENTS
|
minCrit |
134217728ull |
min severity critical |
NO COMMENTS
|
avgLow |
137438953472ull |
avg crossed low threshold |
NO COMMENTS
|
trendMajor |
140737488355328ull |
trend severity major |
NO COMMENTS
|
periodicRecovering |
16384ull |
periodic recovering |
NO COMMENTS
|
minWarn |
16777216ull |
min severity warning |
NO COMMENTS
|
lastReadingMinor |
16ull |
lastReading severity minor |
NO COMMENTS
|
maxCrit |
17179869184ull |
max severity critical |
NO COMMENTS
|
trendLow |
17592186044416ull |
trend crossed low threshold |
NO COMMENTS
|
rateMajor |
18014398509481984ull |
rate severity major |
NO COMMENTS
|
lastReadingRecovering |
1ull |
lastReading recovering |
NO COMMENTS
|
cumulativeMinor |
2048ull |
cumulative severity minor |
NO COMMENTS
|
minRecovering |
2097152ull |
min recovering |
NO COMMENTS
|
maxWarn |
2147483648ull |
max severity warning |
NO COMMENTS
|
avgCrit |
2199023255552ull |
avg severity critical |
NO COMMENTS
|
rateLow |
2251799813685248ull |
rate crossed low threshold |
NO COMMENTS
|
cumulativeHigh |
256ull |
cumulative crossed high threshold |
NO COMMENTS
|
periodicMinor |
262144ull |
periodic severity minor |
NO COMMENTS
|
maxRecovering |
268435456ull |
max recovering |
NO COMMENTS
|
avgWarn |
274877906944ull |
avg severity warning |
NO COMMENTS
|
trendCrit |
281474976710656ull |
trend severity critical |
NO COMMENTS
|
lastReadingHigh |
2ull |
lastReading crossed high threshold |
NO COMMENTS
|
periodicHigh |
32768ull |
periodic crossed high threshold |
NO COMMENTS
|
lastReadingMajor |
32ull |
lastReading severity major |
NO COMMENTS
|
minMinor |
33554432ull |
min severity minor |
NO COMMENTS
|
avgRecovering |
34359738368ull |
avg recovering |
NO COMMENTS
|
trendWarn |
35184372088832ull |
trend severity warning |
NO COMMENTS
|
rateCrit |
36028797018963968ull |
rate severity critical |
NO COMMENTS
|
cumulativeMajor |
4096ull |
cumulative severity major |
NO COMMENTS
|
minHigh |
4194304ull |
min crossed high threshold |
NO COMMENTS
|
maxMinor |
4294967296ull |
max severity minor |
NO COMMENTS
|
trendRecovering |
4398046511104ull |
trend recovering |
NO COMMENTS
|
rateWarn |
4503599627370496ull |
rate severity warning |
NO COMMENTS
|
lastReadingLow |
4ull |
lastReading crossed low threshold |
NO COMMENTS
|
cumulativeLow |
512ull |
cumulative crossed low threshold |
NO COMMENTS
|
periodicMajor |
524288ull |
periodic severity major |
NO COMMENTS
|
maxHigh |
536870912ull |
max crossed high threshold |
NO COMMENTS
|
avgMinor |
549755813888ull |
avg severity minor |
NO COMMENTS
|
rateRecovering |
562949953421312ull |
rate recovering |
NO COMMENTS
|
lastReadingCrit |
64ull |
lastReading severity critical |
NO COMMENTS
|
periodicLow |
65536ull |
periodic crossed low threshold |
NO COMMENTS
|
minMajor |
67108864ull |
min severity major |
NO COMMENTS
|
avgHigh |
68719476736ull |
avg crossed high threshold |
NO COMMENTS
|
trendMinor |
70368744177664ull |
trend severity minor |
NO COMMENTS
|
cumulativeCrit |
8192ull |
cumulative severity critical |
NO COMMENTS
|
minLow |
8388608ull |
min crossed low threshold |
NO COMMENTS
|
maxMajor |
8589934592ull |
max severity major |
NO COMMENTS
|
trendHigh |
8796093022208ull |
trend crossed high threshold |
NO COMMENTS
|
lastReadingWarn |
8ull |
lastReading severity warning |
NO COMMENTS
|
rateMinor |
9007199254740992ull |
rate severity minor |
NO COMMENTS
|
DEFAULT |
unspecified(0ull) |
--- |
NO COMMENTS
|
|
pktsTr
Type: scalar:Sint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrend
Comments:
-
Egress Policer Allowed Packets. This is the trending value of the counter. Note that this value resets to 0 at the beginning of each interval.
pktsTrBase
Type: scalar:Uint64
Units: packets
Encrypted: false
Access: oper
Category: ImplicitTrendBase
Comments:
-
Egress Policer Allowed Packets. This is the cumulative value of the counter from the previous collection interval. Used for internal purposes.
repIntvEnd
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
repIntvStart
Type: scalar:Date
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Comments:
-
rn
Type: reference:BinRN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Comments:
-
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
status
Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Comments:
-
The upgrade status. This property is for internal use only.
| |
Constants |
created |
2u |
created |
In a setter method: specifies that an object should be created.
An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
|
modified |
4u |
modified |
In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
|
deleted |
8u |
deleted |
In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
|
DEFAULT |
0 |
--- |
This type controls the life cycle of objects passed in the XML API.
When used in a setter method (such as configConfMo), the ModificationStatus
specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual
operation that was performed. For example, the ModificationStatus is set to "created"
if the object was created. The ModificationStatus is not set if the object was neither
created, modified, deleted or removed.
When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus
is not set, the system automatically determines if the object should be created or modified.
|
|