Overview  Naming  Diagram  Containers  Contained  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail 

Class ethpm:PhysIf (CONCRETE)

Class ID:3641
Class Label: Physical Interface Runtime State (ethpm)
Encrypted: false - Exportable: false - Persistent: false - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Concrete Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-connectivity, admin]
Creatable/Deletable: yes (see Container Mos for details)
Possible Semantic Scopes: Infra, Fabric,
Semantic Scope Evaluation Rule: Parent
Monitoring Policy Source: Parent
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: true ]

Physical interface information holder

Naming Rules 
RN FORMAT: phys

    [1] PREFIX=phys


DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/phys-{[id]}/phys

[1] sys/phys-{[id]}/phys


Diagram

Super Mo: ethpm:If,
Container Mos: l1:PhysIf (deletable:yes),
Contained Mos: ethpm:DOMStats, ethpm:Fault, ethpm:Fcot, ethpm:FcotDD, ethpm:FcotX2, ethpm:PortCap,


Containers Hierarchies
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
 		[V] fabric:Topology The root for IFC topology.
 
 		 ├
 		[V] fabric:Pod A pod.
 
 		 
 		 ├
 		[V] fabric:Node The root node for the APIC.
 
 		 
 		 
 		 ├
 		[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 		 
 		 
 		 
 		 ├
 		[V] l1:PhysIf The object that represents the Layer 1 physical Ethernet interface information object.
 
 		 
 		 
 		 
 		 
 		 ├
 		[V] ethpm:PhysIf Physical interface information holder
[V] top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
 		[V] top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...
 
 		 ├
 		[V] l1:PhysIf The object that represents the Layer 1 physical Ethernet interface information object.
 
 		 
 		 ├
 		[V] ethpm:PhysIf Physical interface information holder


Contained Hierarchy
[V] ethpm:PhysIf Physical interface information holder
 ├
 		[V] ethpm:DOMStats  Digital Optical Monitor details
 
 		 ├
 		[V] ethpm:DOMCurrentStats  Dynamic Current Information per port info
 
 		 ├
 		[V] ethpm:DOMRxPwrStats  Dynamic Rx Power Information per port info
 
 		 
 		 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 		 
 		 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 
 		 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 
 		 
 		 ├
 		[V] tag:Annotation 
 
 		 
 		 
 		 ├
 		[V] tag:Tag 
 
 		 
 		 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)
 
 		 ├
 		[V] ethpm:DOMTempStats  Temperature Dynamic per port info
 
 		 ├
 		[V] ethpm:DOMTxPwrStats  Dynamic Tx Power Information per port info
 
 		 
 		 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 		 
 		 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 
 		 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 
 		 
 		 ├
 		[V] tag:Annotation 
 
 		 
 		 
 		 ├
 		[V] tag:Tag 
 
 		 
 		 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)
 
 		 ├
 		[V] ethpm:DOMVoltStats  Dynamic Voltage Information per port info
 
 		 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 		 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)
 ├
 		[V] ethpm:Fault 
 
 		 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 		 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 
 		 ├
 		[V] tag:Annotation 
 
 		 
 		 ├
 		[V] tag:Tag 
 
 		 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)
 ├
 		[V] ethpm:Fcot Class for regular Fibre Channel optical transmitter types.
 
 		 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 		 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 
 		 ├
 		[V] tag:Annotation 
 
 		 
 		 ├
 		[V] tag:Tag 
 
 		 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)
 ├
 		[V] ethpm:FcotDD  This is the class for DD fcot types.
 
 		 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 		 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 
 		 ├
 		[V] tag:Annotation 
 
 		 
 		 ├
 		[V] tag:Tag 
 
 		 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)
 ├
 		[V] ethpm:FcotX2 The class for X2 Fibre Channel optical transmitter types.
 
 		 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 
 		 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 
 		 ├
 		[V] tag:Annotation 
 
 		 
 		 ├
 		[V] tag:Tag 
 
 		 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)
 ├
 		[V] ethpm:PortCap Port runtime capabilities, for example maximum speed.
 ├
 		[V] fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.
 ├
 		[V] fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.
 
 		 ├
 		[V] aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility
 
 		 ├
 		[V] tag:Annotation 
 
 		 ├
 		[V] tag:Tag 
 ├
 		[V] health:Inst A base class for a health score instance.(Switch only)


Inheritance
[V] ethpm:If Interface information holder.
 ├
 		[V] ethpm:PhysIf Physical interface information holder


Events 
                ethpm:If:ethpm_If_portup

                ethpm:If:ethpm_If_portInfoDown

                ethpm:If:ethpm_If_portNonDefaultFECMode

                ethpm:If:ethpm_If_portSpeedMismatch

                ethpm:If:ethpm_If_linkPortUp

                ethpm:If:ethpm_If_linkPortDown


Faults 
                ethpm:If:portDownFabric

                ethpm:If:portDownInfraEpg

                ethpm:If:portDownInfraNoEpg

                ethpm:If:portDownNoInfra

                ethpm:If:UnsupportedMplsPlatform


Fsms


Properties Summary
Defined in: ethpm:PhysIf
reference:BinRef monPolDn  (ethpm:PhysIf:monPolDn)
          
l1:FECMode
          scalar:Enum8 		operFecMode  (ethpm:PhysIf:operFecMode)
           FEC knob
Defined in: ethpm:If
base:Encap accessVlan  (ethpm:If:accessVlan)
           The VLAN port access state.
l2:VlanBitmap
          base:BitArray4096 		allowedVlans  (ethpm:If:allowedVlans)
           allowed vlans
address:MAC backplaneMac  (ethpm:If:backplaneMac)
           port backplane mac
scalar:Uint32 bundleBupId  (ethpm:If:bundleBupId)
           bundle bringup id
nw:IfId
          base:IfIndex 		bundleIndex  (ethpm:If:bundleIndex)
           The interface bundle index. A bundle index is a table for a particular output primitive. It defines the workstation dependent aspects of the primitive.
base:Encap cfgAccessVlan  (ethpm:If:cfgAccessVlan)
           The port configuration access VLAN.
base:Encap cfgNativeVlan  (ethpm:If:cfgNativeVlan)
           The port configuration native VLAN.
scalar:Uint32 currErrIndex  (ethpm:If:currErrIndex)
           current error index
l1:DiagsT
          scalar:Enum8 		diags  (ethpm:If:diags)
           port diags type
scalar:Uint32 encap  (ethpm:If:encap)
           port encap
scalar:Bool errDisTimerRunning  (ethpm:If:errDisTimerRunning)
           error disable recovery time running
ethpm:ErrorVlanStatusList
          scalar:Uint32 		errVlanStatusHt  (ethpm:If:errVlanStatusHt)
           port per vlan error state
l2:VlanBitmap
          base:BitArray4096 		errVlans  (ethpm:If:errVlans)
           errored vlans
l2:DomId
          scalar:Uint32 		hwBdId  (ethpm:If:hwBdId)
           hw bd id (allocated for l3 ports, port-channels)
l2:HwRsrcIdT
          scalar:Uint32 		hwResourceId  (ethpm:If:hwResourceId)
           Hardware resource identifier (allocated by eltm)
l1:IntfT
          scalar:Enum8 		intfT  (ethpm:If:intfT)
           interface type
scalar:Uint64 iod  (ethpm:If:iod)
           iod
ethpm:LastErrorsList
          base:Uint32Array4 		lastErrors  (ethpm:If:lastErrors)
           last seen errors
scalar:Date lastLinkStChg  (ethpm:If:lastLinkStChg)
           Last link state change
scalar:Uint32 media  (ethpm:If:media)
           port media
base:Encap nativeVlan  (ethpm:If:nativeVlan)
           port native vlan
scalar:Uint32 numOfSI  (ethpm:If:numOfSI)
           number of sub-interfaces
ethpm:PortOperBitmap
          base:BitArray64 		operBitset  (ethpm:If:operBitset)
           port oper bitset
l1:DceMode
          scalar:Enum8 		operDceMode  (ethpm:If:operDceMode)
           Operational Dce Mode
l1:Duplex
          scalar:Enum8 		operDuplex  (ethpm:If:operDuplex)
           The operational duplex state.
scalar:Uint32 operEEERxWkTime  (ethpm:If:operEEERxWkTime)
           Operational port EEE rx time
l1:EEEState
          scalar:Enum8 		operEEEState  (ethpm:If:operEEEState)
           Operational port EEE state
scalar:Uint32 operEEETxWkTime  (ethpm:If:operEEETxWkTime)
           Operational port EEE tx time
l1:OperErrDisQual
          scalar:Enum32 		operErrDisQual  (ethpm:If:operErrDisQual)
           The operational port error disable reason code.
l1:FlowCtrlVal
          scalar:UByte 		operFlowCtrl  (ethpm:If:operFlowCtrl)
           Operational port flow control
l1:Mdix
          scalar:Enum8 		operMdix  (ethpm:If:operMdix)
           port oper mdix mode
l1:Mode
          scalar:Enum8 		operMode  (ethpm:If:operMode)
           The operational port mode.
l1:Mode
          scalar:Enum8 		operModeDetail  (ethpm:If:operModeDetail)
           Detailed Operational port mode
l1:OperSt
          scalar:Enum8 		operPhyEnSt  (ethpm:If:operPhyEnSt)
           Operational phy port enable state
address:MAC operRouterMac  (ethpm:If:operRouterMac)
           Operational port router mac
l1:Speed
          scalar:Enum16 		operSpeed  (ethpm:If:operSpeed)
           Operational port speed
l1:OperSt
          scalar:Enum8 		operSt  (ethpm:If:operSt)
           The operational port state.
l1:OperStQual
          scalar:Enum32 		operStQual  (ethpm:If:operStQual)
           The operational state failure reason.
l1:OperStQualCode
          scalar:Uint32 		operStQualCode  (ethpm:If:operStQualCode)
           Operational port status syserror code
l2:VlanBitmap
          base:BitArray4096 		operVlans  (ethpm:If:operVlans)
           operational vlans
nw:OSSum
          scalar:Enum8 		osSum  (ethpm:If:osSum)
           Operational state summary
scalar:Uint32 portCfgWaitFlags  (ethpm:If:portCfgWaitFlags)
           port config wait flags
base:Encap primaryVlan  (ethpm:If:primaryVlan)
           port primary-vlan
scalar:Uint32 resetCtr  (ethpm:If:resetCtr)
           reset counter
ethpm:SiBitmap
          base:BitArray4096 		siList  (ethpm:If:siList)
           configured sub-interface ids
l1:TxT
          scalar:Enum8 		txT  (ethpm:If:txT)
           port Tx type
l1:PortUsage
          scalar:Bitmask32 		usage  (ethpm:If:usage)
          
scalar:Uint32 userCfgdFlags  (ethpm:If:userCfgdFlags)
           port user config flags
l2:VdcId
          scalar:Uint16 		vdcId  (ethpm:If:vdcId)
           vdc id
Defined in: mo:Modifiable
mo:TStamp
          scalar:Date 		modTs  (mo:Modifiable:modTs)
           The time when this object was last modified.
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32 		childAction  (mo:TopProps:childAction)
           Delete or ignore. For internal use only.
reference:BinRef dn  (mo:TopProps:dn)
           A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.
reference:BinRN rn  (mo:TopProps:rn)
           Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.
mo:ModificationStatus
          scalar:Bitmask32 		status  (mo:TopProps:status)
           The upgrade status. This property is for internal use only.
Properties Detail

accessVlan

Type: base:Encap

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The VLAN port access state.


allowedVlans

Type: l2:VlanBitmap
Primitive Type: base:BitArray4096

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
allowed vlans


backplaneMac

Type: address:MAC

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port backplane mac


bundleBupId

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
bundle bringup id


bundleIndex

Type: nw:IfId
Primitive Type: base:IfIndex

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The interface bundle index. A bundle index is a table for a particular output primitive. It defines the workstation dependent aspects of the primitive.


cfgAccessVlan

Type: base:Encap

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The port configuration access VLAN.


cfgNativeVlan

Type: base:Encap

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The port configuration native VLAN.


childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
    Comments:
Delete or ignore. For internal use only.
Constants
deleteAll 16384u deleteAll NO COMMENTS
ignore 4096u ignore NO COMMENTS
deleteNonPresent 8192u deleteNonPresent NO COMMENTS
DEFAULT 0 --- This type is used to




currErrIndex

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
current error index


diags

Type: l1:DiagsT
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port diags type
Constants
none 1 none NO COMMENTS
dom 2 dom NO COMMENTS
ddm 3 ddm NO COMMENTS
DEFAULT none(1) none NO COMMENTS




dn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
    Comments:
A tag or metadata is a non-hierarchical keyword or term assigned to the fabric module.


encap

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port encap


errDisTimerRunning

Type: scalar:Bool

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
error disable recovery time running
Constants
no false --- NO COMMENTS
yes true --- NO COMMENTS
DEFAULT no(false) --- NO COMMENTS




errVlanStatusHt

Type: ethpm:ErrorVlanStatusList
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port per vlan error state


errVlans

Type: l2:VlanBitmap
Primitive Type: base:BitArray4096

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
errored vlans


hwBdId

Type: l2:DomId
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
hw bd id (allocated for l3 ports, port-channels)


hwResourceId

Type: l2:HwRsrcIdT
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Hardware resource identifier (allocated by eltm)


intfT

Type: l1:IntfT
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
interface type
Constants
phy 1 phy NO COMMENTS
phy-shared 2 phy-shared NO COMMENTS
DEFAULT phy(1) phy NO COMMENTS




iod

Type: scalar:Uint64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
iod


lastErrors

Type: ethpm:LastErrorsList
Primitive Type: base:Uint32Array4

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
last seen errors


lastLinkStChg

Type: scalar:Date

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Last link state change


media

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port media


modTs

Type: mo:TStamp
Primitive Type: scalar:Date

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:
The time when this object was last modified.
Constants
never 0ull never NO COMMENTS
DEFAULT never(0ull) never NO COMMENTS




monPolDn

Type: reference:BinRef

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
    Comments:


nativeVlan

Type: base:Encap

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port native vlan


numOfSI

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
number of sub-interfaces


operBitset

Type: ethpm:PortOperBitmap
Primitive Type: base:BitArray64

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port oper bitset


operDceMode

Type: l1:DceMode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational Dce Mode
Constants
core 1 core NO COMMENTS
edge 2 edge NO COMMENTS
auto 3 auto NO COMMENTS
off 4 off NO COMMENTS
DEFAULT off(4) off NO COMMENTS




operDuplex

Type: l1:Duplex
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The operational duplex state.
Constants
auto 1 auto NO COMMENTS
full 2 full NO COMMENTS
half 3 half NO COMMENTS
DEFAULT auto(1) auto NO COMMENTS




operEEERxWkTime

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational port EEE rx time


operEEEState

Type: l1:EEEState
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational port EEE state
Constants
enable 1 enable NO COMMENTS
disable 2 disable NO COMMENTS
disagreed 3 disagreed NO COMMENTS
not-applicable 4 not-applicable NO COMMENTS
DEFAULT not-applicable(4) not-applicable NO COMMENTS




operEEETxWkTime

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational port EEE tx time


operErrDisQual

Type: l1:OperErrDisQual
Primitive Type: scalar:Enum32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The operational port error disable reason code.
Constants
unknown 0u down The port state is unknown
denied-due-to-port-binding 100u invldBndng NO COMMENTS
domain-addr-assign-failure-isolation 101u domAddrAssignFailIsolated NO COMMENTS
domain-invalid-rcf-received 102u domInvlRcfRcvdIsolated NO COMMENTS
domain-isolation-unknown-reason 103u domUnkwnRsnIsolated NO COMMENTS
domain-manager-disabled 104u domMgrDisIsolated NO COMMENTS
domain-not-allowed-isolation 105u domNtAllowedIsolated NO COMMENTS
domain-other-side-eport-isolated 106u domOthrSideEprtIsolated NO COMMENTS
domain-overlap-isolation 107u domOverlapIsolated NO COMMENTS
dpvm-vsan-not-found 108u dpvmVsanNtFndSuspended NO COMMENTS
dpvm-vsan-suspended 109u dpvmVsanSuspended NO COMMENTS
sfp-missing 10u sfpAbsent The SFP is absent on this port
ec-suspended-for-loop 110u ecSuspendedForLoop NO COMMENTS
elp-failure-all-zero-peer-wwn-rcvd 111u elpFailZPeer NO COMMENTS
elp-failure-classf-param-err 112u elpFailClassfIsolated NO COMMENTS
elp-failure-classn-param-err 113u elpFailClassnIsolated NO COMMENTS
elp-failure-invalid-flow-ctl-param 114u elpFailInvlFlowCtlIsolated NO COMMENTS
elp-failure-invalid-payload-size 115u elpFailInvlPayldSzIsolated NO COMMENTS
elp-failure-invalid-port-name 116u elpFailInvlPrtNameIsolated NO COMMENTS
elp-failure-invalid-switch-name 117u elpFailInvlSwNameIsolated NO COMMENTS
elp-failure-invalid-tx-bbcredit 118u elpFailInvlTxBbcrIsolated NO COMMENTS
elp-failure-isolation 119u elpFailIsolated NO COMMENTS
loopback-diag-failure 11u faulty NO COMMENTS
elp-failure-loopback-detected 120u elpFailLoopDetectIsolated NO COMMENTS
elp-failure-ratov-edtov-mismatch 121u elpFailRaEdTovIsolated NO COMMENTS
elp-failure-revision-mismatch 122u elpFailRevMismatchIsolated NO COMMENTS
elp-failure-unknown-flow-ctl-code 123u elpFailUnkwnFlowCtlIsolated NO COMMENTS
eport-prohibited 124u ficonProhibit NO COMMENTS
epp-failure 125u eppFail err-disabled NO COMMENTS
esc-failure-isolation 126u escFailIsolated NO COMMENTS
externally-disabled 127u extDisabled NO COMMENTS
fabric-binding-database-mismatch 128u fabBindDbMismatchIsolated NO COMMENTS
fabric-binding-domain-invalid 129u fabBindDomInvlIsolated NO COMMENTS
udld-unidir-detected 12u udldUnidir NO COMMENTS
fabric-binding-peer-not-responding 130u fabBindPeerNtRespIsolated NO COMMENTS
fabric-binding-swwn-not-found 131u fabBindSwwnNtFoundIsolated NO COMMENTS
fabric-bind-failure 132u FabBindFailIsolated NO COMMENTS
fcid-allocation-failed 133u fcidAllcFail NO COMMENTS
fcsp-authent-failure 134u fcspAuthFailIsolated NO COMMENTS
fc-redirect-isolation 135u fcReIsolated NO COMMENTS
ficon-being-enabled 136u ficonEnabled NO COMMENTS
ficon-not-enabled 137u ficonNtEn err-disabled NO COMMENTS
ficon-no-portnumber 138u noFiconPortNm NO COMMENTS
ficon-vsan-down 139u ficonDown NO COMMENTS
udld-tx-rx-loop 13u udldLoop NO COMMENTS
ficon-vsan-duplicate-portnum 140u dupPort NO COMMENTS
incompatible-admin-rxbbcredit 141u incompAdmin-rxbbcr err-disabled NO COMMENTS
incompatible-admin-rxbbcredit-performance-buf 142u incompAdminPerf err-disabled NO COMMENTS
incompatible-admin-rxbufsize 143u incompAdminrxBufSz err-disabled NO COMMENTS
internal-rcf-in-progress 144u intlRcf NO COMMENTS
invalid-attachment 145u invaldAttch NO COMMENTS
invalid-config 146u invalidCfg NO COMMENTS
invalid-fabric-binding-exchange 147u InvaldFabBindExIsolated NO COMMENTS
invalid-other-princ-efp-req-recd 148u invalid NO COMMENTS
link-fail-credit-loss 149u linkFailCrLossNotConnect NO COMMENTS
udld-neighbor-mismatch 14u udldMismatch NO COMMENTS
link-fail-credit-loss-b2b 150u linkFailCrLossb2bNotConnect NO COMMENTS
link-fail-debounce-timeout 151u linkFailDebounceTmoutNotConnect NO COMMENTS
link-fail-line-card-port-shutdown 152u linkFailLcPrtShtNotConnect NO COMMENTS
link-fail-lip-f8-rcvd 153u linkFailLipf8RcvdNotConnect NO COMMENTS
link-fail-lip-rcvd-b2b 154u linkFailLipRcvdB2bNotConnect NO COMMENTS
link-fail-loss-of-signal 155u linkFailSigLoassNotConnect NO COMMENTS
link-fail-loss-of-sync 156u linkFailSyncLossNotConnect NO COMMENTS
link-fail-lr-rcvd-b2b 157u linkFailLrRcvdB2bNotConnect NO COMMENTS
link-fail-nos-rcvd 158u linkFailNosRcvdNotConnect NO COMMENTS
link-fail-ols-rcvd 159u linkFailOlsRcvdNotConnect NO COMMENTS
udld-empty-echo 15u udldEmpEcho NO COMMENTS
link-fail-opny-ret-b2b 160u linkFailOpnyRetNotConnect NO COMMENTS
link-fail-opny-tmo-b2b 161u linkFailOpnyTmoNotConnect NO COMMENTS
link-fail-port-init-failed 162u linkFail NO COMMENTS
link-fail-rx-que-overflow 163u linkFailRxQueOvrFlowNotConnect NO COMMENTS
link-fail-too-many-intr 164u errDisabled NO COMMENTS
non-participating 165u nonPcpt NO COMMENTS
no-trunk-oper-vsans-isolation 166u noTrunkOperVsansIsolated NO COMMENTS
ohms-external-lb-test 167u ohmsExtLbTestSuspended NO COMMENTS
osm-e-port-up 168u osmEprtUpErrDisabled NO COMMENTS
out-of-service 169u outOfService NO COMMENTS
udld-aggressive-mode-link-failed 16u udldAggr NO COMMENTS
peer-fcip-closed-tcp-connection 170u peerDownClosed NO COMMENTS
peer-fcip-reset-tcp-connection 171u peerDownReset NO COMMENTS
peer-not-support-bundles 172u PeerNtSupportBundleSuspended NO COMMENTS
port-act-license-not-available 173u portLicNtAvl NO COMMENTS
port-bind-failure 174u portBindFailIsolated NO COMMENTS
port-blocked 175u portBlcked NO COMMENTS
port-bringup-isolation 176u portUpIsolated NO COMMENTS
port-cap-fc-port-connector-type-err 177u connctrErr NO COMMENTS
poe-insufficient-power 178u insufficientPower NO COMMENTS
port-vsan-mismatch-isolation 179u portVsanMismatchIsolated NO COMMENTS
link-flap-err 17u linkFlapErr NO COMMENTS
prefered-path-isolation 180u preferedPathIsolated NO COMMENTS
rcf-in-progress 181u rcfInPrgrss NO COMMENTS
sdm-isolation 182u sdmIsolated NO COMMENTS
src-port-not-bound 183u srcUnbound NO COMMENTS
suspended-by-wwn 184u suspended-by-wwn NO COMMENTS
tcp-keep-alive-timer-expired 185u tcpDownKeepaliveTmrExpired NO COMMENTS
tcp-max-retransmissions 186u tcpDownMaxReTransmission NO COMMENTS
tcp-persist-timer-expired 187u tcpDownPersistTmrExpired NO COMMENTS
too-many-invalid-flogis 188u invldFlgis NO COMMENTS
tov-mismatch 189u tovMismatchIsolated NO COMMENTS
err-disabled-ip-conflict 18u conflctErrDis NO COMMENTS
tracked-port-down 190u trckdPortDwn NO COMMENTS
trunk-not-fully-active 191u some NO COMMENTS
tunnel-src-module-not-online 192u srcMdOffline NO COMMENTS
tunnel-src-port-removed 193u srcPrtRemv NO COMMENTS
two-switches-with-same-wwn 194u dupWwn NO COMMENTS
virtual-ivr-domain-overlap-isolation 195u virtualIvrDomOverlapIsolated NO COMMENTS
vsan-mismatch-isolation 196u vsanMismatchIsolated NO COMMENTS
zone-merge-failure-isolation 197u zoneMergeFailIsolated NO COMMENTS
zone-remote-no-resp-isolation 198u zoneRemoteNoRespIsolated NO COMMENTS
port-quiesced 199u grcefulShtdwn NO COMMENTS
ipqos-dcbxp-compat-failure 19u ipQosDcbxpCompatFailure NO COMMENTS
up 1u up This port is operationally up
stormctrl-err-disabled 200u StormCtrlErrDis NO COMMENTS
poe-err-disabled 201u poeErrDisable NO COMMENTS
qsa-adaptor-no-xcvr 202u qsaAdaptor NO COMMENTS
mpls-platform-not-supported 203u mplsPfmNotSupp NO COMMENTS
err-disabled-link-flaps 204u err-disabled-link-flaps NO COMMENTS
link-failure 20u notconnect NO COMMENTS
offline 21u offline NO COMMENTS
initializing 22u init NO COMMENTS
inactive 23u inactive NO COMMENTS
channel-admin-down 24u channelDown NO COMMENTS
channel-err-disabled 25u Channel error-disabled-err-disabled NO COMMENTS
suspended 26u suspnd NO COMMENTS
proto-port-suspend 27u portSuspnd NO COMMENTS
channel-membership-update-in-progress 28u channelUpdate NO COMMENTS
parent-down 29u parentDown NO COMMENTS
admin-down 2u disabled This port is down because it is admin down
parent-admin-down 30u adminDown-parentDown NO COMMENTS
interface-removed 31u ifRemoved NO COMMENTS
fcot-no-present 32u sfpAbsent fcotAbsent is more correct, but vsh uses sfpAbsent.
fcot-vendor-not-supported 33u SFP vendor not supported-err-disabled NO COMMENTS
incompatible-admin-mode 34u errDisabledIncompatPortMode-err-disabled NO COMMENTS
incompatible-admin-speed 35u errDisabledIncompatPortSpeed-err-disabled NO COMMENTS
suspended-by-mode 36u suspended-by-mode NO COMMENTS
suspended-by-speed 37u suspended-by-speed NO COMMENTS
domain-max-retransmission-failure 38u domMaxRetransFailIsolated NO COMMENTS
loopback-isolation 39u loopbackIsolated NO COMMENTS
link-down 3u parentEthDown The link is down
upgrade-in-progress 40u modUpgrade NO COMMENTS
port-channel-members-down 41u noOperMembers NO COMMENTS
ethernet-link-down 42u parentEthDown NO COMMENTS
ethernet-interface-down 43u interface-parentEthDown NO COMMENTS
admin-config-change 44u adminCfgChng NO COMMENTS
module-removed 45u modRemoved NO COMMENTS
vrf-unusable 46u vrfUnusable NO COMMENTS
none 47u connected NO COMMENTS
xcvr-initializing 48u sfpInit NO COMMENTS
cap-absent 49u capAbsent NO COMMENTS
fail 4u fail The link is failed state
sfp-eth-compliant-err 50u xcvrEthComplianceErr NO COMMENTS
sdp-timeout 51u SDP timeout/SFP Mismatch NO COMMENTS
sat-incompat-topo 52u FEX identity mismatch NO COMMENTS
sat-not-configured 53u FEX not configured NO COMMENTS
auth-fail 54u xcvrAuthFailed NO COMMENTS
auth-pending 55u authPending NO COMMENTS
suspended-due-to-minlinks 56u suspendedMinLinks NO COMMENTS
suspended-due-to-no-lacp-pdus 57u suspended(no LACP PDUs) NO COMMENTS
sat-fabric-if-down 58u fabrcIfDown NO COMMENTS
invalid-sat-fabric-if 59u invalidFbIf NO COMMENTS
no-license 5u portLicNtAvl The port has no valid license
fex-sfp-invalid 60u FEX-fabric sfp invalid NO COMMENTS
suspend-by-mtu 61u mtuFailure NO COMMENTS
suspend-by-vpc 62u suspndByVpc NO COMMENTS
router-mac-failure 63u routrmacFail NO COMMENTS
xcvr-auth-failed 64u xcvrAuthFailed NO COMMENTS
non-sticky-externally-disabled 65u ServDisab NO COMMENTS
sfp-speed-mismatch 66u xcvrSpeedMismatch NO COMMENTS
fcot-chksum-err 67u SFP checksum error NO COMMENTS
xcvr-invalid 68u Transceiver validation failed NO COMMENTS
vpc-peer-link-down 69u vpcPeerLinkDown NO COMMENTS
link-up 6u link-up-connected The link is up
vpc-cfg-in-progress 70u vpcConfigInProgress NO COMMENTS
vpc-no-response-from-peer 71u noRespFrmVpc NO COMMENTS
bpdu-guard-err-disable 72u BPDUGuard errDisable NO COMMENTS
hot-standby-in-bundle 73u htStdbyInBndl NO COMMENTS
handshake-fail-errdisable 74u intFailErrDis NO COMMENTS
mcp-loop-err-disable 75u mcpLoop errDisable NO COMMENTS
epm-learn-err-disable 76u epmLearn errDisable NO COMMENTS
mac-pinning 77u macPinning NO COMMENTS
fabric-track 78u fabricTrack NO COMMENTS
configuration-incomplete 79u incomplete config NO COMMENTS
hw-fail 7u faulty This port has a hardware failure
ethernet-vlan-down 80u parentVlanDown NO COMMENTS
link-fail-reset 81u linkReset NO COMMENTS
vfc-binding-invalid 82u vfcBindingInvalid NO COMMENTS
vlan-not-fcoe-enabled 83u vlanNotFcoeEnabled NO COMMENTS
ethernet-invalid-binding 84u parentInvalidBinding NO COMMENTS
link-fail-port-unusable 85u linkFailPortUnusable NO COMMENTS
diag-failure-errdisable 86u diag failure errDisable NO COMMENTS
incompatible-fecmode 87u errDisabledIncompatFECMode-err-disabled NO COMMENTS
npm-no-ext-link 88u NPV upstream port not available NO COMMENTS
port-reinit-limit 89u Port reinit threshold reached NO COMMENTS
sw-fail 8u faulty This port has a software failure
npiv-not-enb-upstream 90u NPIV upstream port not available NO COMMENTS
vsan-mismatch-upstream 91u VSAN mismatch with upstream port NO COMMENTS
pause-rate-limit-err-disable 92u pauseRateLimit errDisable NO COMMENTS
hw-disabled 93u hwDisabled NO COMMENTS
dot1x-security-errdisable 94u dot1xSecurityErrDisable NO COMMENTS
dcx-noack-in-100pdus 95u dcxNoACKin100PDUs NO COMMENTS
bundle-cfg-mismatch 96u bundleCfgMismatch NO COMMENTS
unsupported-platform-l3po 97u unsupportedPlatformL3Po NO COMMENTS
bit-err-rt-thres-exceeded 98u bitEThrshExc NO COMMENTS
bundle-miscfg 99u err-disabled NO COMMENTS
err-disabled 9u err-disabled The port is in err disable mode
DEFAULT admin-down(2u) disabled This port is down because it is admin down




operFecMode

Type: l1:FECMode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
FEC knob
Constants
inherit 1 Inherit NO COMMENTS
cl91-rs-fec 2 CL91-RS-FEC NO COMMENTS
cl74-fc-fec 3 CL74-FC-FEC NO COMMENTS
ieee-rs-fec 4 IEEE-RS-FEC NO COMMENTS
cons16-rs-fec 5 CONS16-RS-FEC NO COMMENTS
kp-fec 6 KP-FEC NO COMMENTS
disable-fec 7 DISABLE-FEC NO COMMENTS
auto-fec 8 AUTO-FEC NO COMMENTS
DEFAULT inherit(1) Inherit NO COMMENTS




operFlowCtrl

Type: l1:FlowCtrlVal
Primitive Type: scalar:UByte

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational port flow control
Constants
defaultValue 0xf --- NO COMMENTS




operMdix

Type: l1:Mdix
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port oper mdix mode
Constants
auto 1 auto NO COMMENTS
mdi 2 mdi NO COMMENTS
mdi-x 3 mdi-x NO COMMENTS
DEFAULT auto(1) auto NO COMMENTS




operMode

Type: l1:Mode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The operational port mode.
Constants
unknown 0 unknown NO COMMENTS
access 1 access NO COMMENTS
trunk 2 trunk NO COMMENTS
fex-fabric 3 fex-fabric NO COMMENTS
qiq-tunnel-edgePort 4 qiq-tunnel-edgePort NO COMMENTS
qiq-tunnel-corePort 5 qiq-tunnel-corePort NO COMMENTS
trunk-doubleEncapPort 6 trunk-doubleEncapPort NO COMMENTS
DEFAULT trunk(2) trunk NO COMMENTS




operModeDetail

Type: l1:Mode
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Detailed Operational port mode
Constants
unknown 0 unknown NO COMMENTS
access 1 access NO COMMENTS
trunk 2 trunk NO COMMENTS
fex-fabric 3 fex-fabric NO COMMENTS
qiq-tunnel-edgePort 4 qiq-tunnel-edgePort NO COMMENTS
qiq-tunnel-corePort 5 qiq-tunnel-corePort NO COMMENTS
trunk-doubleEncapPort 6 trunk-doubleEncapPort NO COMMENTS
DEFAULT trunk(2) trunk NO COMMENTS




operPhyEnSt

Type: l1:OperSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational phy port enable state
Constants
unknown 0 unknown Unknown state
down 1 down Port is down
up 2 up Port is up
link-up 3 link-up Port is link-up
channel-admin-down 4 channel-admin-down Port Channel is admin-down
DEFAULT down(1) down Port is down




operRouterMac

Type: address:MAC

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational port router mac


operSpeed

Type: l1:Speed
Primitive Type: scalar:Enum16

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational port speed
Constants
unknown 0 Unspecified Speed is unknown
100M 1 100 Mbps Speed is 100 Mbps
1G 2 1 Gbps Speed is 1 Gbps
10G 3 10 Gbps Speed is 10 Gbps
25G 4 25 Gbps Speed is 25 Gbps
40G 5 40 Gbps Speed is 40 Gbps
50G 6 50 Gbps Speed is 50 Gbps
100G 7 100 Gbps Speed is 100 Gbps
200G 8 200 Gbps Speed is 200 Gbps
400G 9 400 Gbps Speed is 400 Gbps
inherit 10 inherit Speed is Inherited
DEFAULT inherit(10) inherit Speed is Inherited




operSt

Type: l1:OperSt
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The operational port state.
Constants
unknown 0 unknown Unknown state
down 1 down Port is down
up 2 up Port is up
link-up 3 link-up Port is link-up
channel-admin-down 4 channel-admin-down Port Channel is admin-down
DEFAULT down(1) down Port is down




operStQual

Type: l1:OperStQual
Primitive Type: scalar:Enum32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
The operational state failure reason.
Constants
unknown 0u down The port state is unknown
denied-due-to-port-binding 100u invldBndng NO COMMENTS
domain-addr-assign-failure-isolation 101u domAddrAssignFailIsolated NO COMMENTS
domain-invalid-rcf-received 102u domInvlRcfRcvdIsolated NO COMMENTS
domain-isolation-unknown-reason 103u domUnkwnRsnIsolated NO COMMENTS
domain-manager-disabled 104u domMgrDisIsolated NO COMMENTS
domain-not-allowed-isolation 105u domNtAllowedIsolated NO COMMENTS
domain-other-side-eport-isolated 106u domOthrSideEprtIsolated NO COMMENTS
domain-overlap-isolation 107u domOverlapIsolated NO COMMENTS
dpvm-vsan-not-found 108u dpvmVsanNtFndSuspended NO COMMENTS
dpvm-vsan-suspended 109u dpvmVsanSuspended NO COMMENTS
sfp-missing 10u sfpAbsent The SFP is absent on this port
ec-suspended-for-loop 110u ecSuspendedForLoop NO COMMENTS
elp-failure-all-zero-peer-wwn-rcvd 111u elpFailZPeer NO COMMENTS
elp-failure-classf-param-err 112u elpFailClassfIsolated NO COMMENTS
elp-failure-classn-param-err 113u elpFailClassnIsolated NO COMMENTS
elp-failure-invalid-flow-ctl-param 114u elpFailInvlFlowCtlIsolated NO COMMENTS
elp-failure-invalid-payload-size 115u elpFailInvlPayldSzIsolated NO COMMENTS
elp-failure-invalid-port-name 116u elpFailInvlPrtNameIsolated NO COMMENTS
elp-failure-invalid-switch-name 117u elpFailInvlSwNameIsolated NO COMMENTS
elp-failure-invalid-tx-bbcredit 118u elpFailInvlTxBbcrIsolated NO COMMENTS
elp-failure-isolation 119u elpFailIsolated NO COMMENTS
loopback-diag-failure 11u faulty NO COMMENTS
elp-failure-loopback-detected 120u elpFailLoopDetectIsolated NO COMMENTS
elp-failure-ratov-edtov-mismatch 121u elpFailRaEdTovIsolated NO COMMENTS
elp-failure-revision-mismatch 122u elpFailRevMismatchIsolated NO COMMENTS
elp-failure-unknown-flow-ctl-code 123u elpFailUnkwnFlowCtlIsolated NO COMMENTS
eport-prohibited 124u ficonProhibit NO COMMENTS
epp-failure 125u eppFail err-disabled NO COMMENTS
esc-failure-isolation 126u escFailIsolated NO COMMENTS
externally-disabled 127u extDisabled NO COMMENTS
fabric-binding-database-mismatch 128u fabBindDbMismatchIsolated NO COMMENTS
fabric-binding-domain-invalid 129u fabBindDomInvlIsolated NO COMMENTS
udld-unidir-detected 12u udldUnidir NO COMMENTS
fabric-binding-peer-not-responding 130u fabBindPeerNtRespIsolated NO COMMENTS
fabric-binding-swwn-not-found 131u fabBindSwwnNtFoundIsolated NO COMMENTS
fabric-bind-failure 132u FabBindFailIsolated NO COMMENTS
fcid-allocation-failed 133u fcidAllcFail NO COMMENTS
fcsp-authent-failure 134u fcspAuthFailIsolated NO COMMENTS
fc-redirect-isolation 135u fcReIsolated NO COMMENTS
ficon-being-enabled 136u ficonEnabled NO COMMENTS
ficon-not-enabled 137u ficonNtEn err-disabled NO COMMENTS
ficon-no-portnumber 138u noFiconPortNm NO COMMENTS
ficon-vsan-down 139u ficonDown NO COMMENTS
udld-tx-rx-loop 13u udldLoop NO COMMENTS
ficon-vsan-duplicate-portnum 140u dupPort NO COMMENTS
incompatible-admin-rxbbcredit 141u incompAdmin-rxbbcr err-disabled NO COMMENTS
incompatible-admin-rxbbcredit-performance-buf 142u incompAdminPerf err-disabled NO COMMENTS
incompatible-admin-rxbufsize 143u incompAdminrxBufSz err-disabled NO COMMENTS
internal-rcf-in-progress 144u intlRcf NO COMMENTS
invalid-attachment 145u invaldAttch NO COMMENTS
invalid-config 146u invalidCfg NO COMMENTS
invalid-fabric-binding-exchange 147u InvaldFabBindExIsolated NO COMMENTS
invalid-other-princ-efp-req-recd 148u invalid NO COMMENTS
link-fail-credit-loss 149u linkFailCrLossNotConnect NO COMMENTS
udld-neighbor-mismatch 14u udldMismatch NO COMMENTS
link-fail-credit-loss-b2b 150u linkFailCrLossb2bNotConnect NO COMMENTS
link-fail-debounce-timeout 151u linkFailDebounceTmoutNotConnect NO COMMENTS
link-fail-line-card-port-shutdown 152u linkFailLcPrtShtNotConnect NO COMMENTS
link-fail-lip-f8-rcvd 153u linkFailLipf8RcvdNotConnect NO COMMENTS
link-fail-lip-rcvd-b2b 154u linkFailLipRcvdB2bNotConnect NO COMMENTS
link-fail-loss-of-signal 155u linkFailSigLoassNotConnect NO COMMENTS
link-fail-loss-of-sync 156u linkFailSyncLossNotConnect NO COMMENTS
link-fail-lr-rcvd-b2b 157u linkFailLrRcvdB2bNotConnect NO COMMENTS
link-fail-nos-rcvd 158u linkFailNosRcvdNotConnect NO COMMENTS
link-fail-ols-rcvd 159u linkFailOlsRcvdNotConnect NO COMMENTS
udld-empty-echo 15u udldEmpEcho NO COMMENTS
link-fail-opny-ret-b2b 160u linkFailOpnyRetNotConnect NO COMMENTS
link-fail-opny-tmo-b2b 161u linkFailOpnyTmoNotConnect NO COMMENTS
link-fail-port-init-failed 162u linkFail NO COMMENTS
link-fail-rx-que-overflow 163u linkFailRxQueOvrFlowNotConnect NO COMMENTS
link-fail-too-many-intr 164u errDisabled NO COMMENTS
non-participating 165u nonPcpt NO COMMENTS
no-trunk-oper-vsans-isolation 166u noTrunkOperVsansIsolated NO COMMENTS
ohms-external-lb-test 167u ohmsExtLbTestSuspended NO COMMENTS
osm-e-port-up 168u osmEprtUpErrDisabled NO COMMENTS
out-of-service 169u outOfService NO COMMENTS
udld-aggressive-mode-link-failed 16u udldAggr NO COMMENTS
peer-fcip-closed-tcp-connection 170u peerDownClosed NO COMMENTS
peer-fcip-reset-tcp-connection 171u peerDownReset NO COMMENTS
peer-not-support-bundles 172u PeerNtSupportBundleSuspended NO COMMENTS
port-act-license-not-available 173u portLicNtAvl NO COMMENTS
port-bind-failure 174u portBindFailIsolated NO COMMENTS
port-blocked 175u portBlcked NO COMMENTS
port-bringup-isolation 176u portUpIsolated NO COMMENTS
port-cap-fc-port-connector-type-err 177u connctrErr NO COMMENTS
poe-insufficient-power 178u insufficientPower NO COMMENTS
port-vsan-mismatch-isolation 179u portVsanMismatchIsolated NO COMMENTS
link-flap-err 17u linkFlapErr NO COMMENTS
prefered-path-isolation 180u preferedPathIsolated NO COMMENTS
rcf-in-progress 181u rcfInPrgrss NO COMMENTS
sdm-isolation 182u sdmIsolated NO COMMENTS
src-port-not-bound 183u srcUnbound NO COMMENTS
suspended-by-wwn 184u suspended-by-wwn NO COMMENTS
tcp-keep-alive-timer-expired 185u tcpDownKeepaliveTmrExpired NO COMMENTS
tcp-max-retransmissions 186u tcpDownMaxReTransmission NO COMMENTS
tcp-persist-timer-expired 187u tcpDownPersistTmrExpired NO COMMENTS
too-many-invalid-flogis 188u invldFlgis NO COMMENTS
tov-mismatch 189u tovMismatchIsolated NO COMMENTS
err-disabled-ip-conflict 18u conflctErrDis NO COMMENTS
tracked-port-down 190u trckdPortDwn NO COMMENTS
trunk-not-fully-active 191u some NO COMMENTS
tunnel-src-module-not-online 192u srcMdOffline NO COMMENTS
tunnel-src-port-removed 193u srcPrtRemv NO COMMENTS
two-switches-with-same-wwn 194u dupWwn NO COMMENTS
virtual-ivr-domain-overlap-isolation 195u virtualIvrDomOverlapIsolated NO COMMENTS
vsan-mismatch-isolation 196u vsanMismatchIsolated NO COMMENTS
zone-merge-failure-isolation 197u zoneMergeFailIsolated NO COMMENTS
zone-remote-no-resp-isolation 198u zoneRemoteNoRespIsolated NO COMMENTS
port-quiesced 199u grcefulShtdwn NO COMMENTS
ipqos-dcbxp-compat-failure 19u ipQosDcbxpCompatFailure NO COMMENTS
up 1u up This port is operationally up
stormctrl-err-disabled 200u StormCtrlErrDis NO COMMENTS
poe-err-disabled 201u poeErrDisable NO COMMENTS
qsa-adaptor-no-xcvr 202u qsaAdaptor NO COMMENTS
mpls-platform-not-supported 203u mplsPfmNotSupp NO COMMENTS
err-disabled-link-flaps 204u err-disabled-link-flaps NO COMMENTS
link-failure 20u notconnect NO COMMENTS
offline 21u offline NO COMMENTS
initializing 22u init NO COMMENTS
inactive 23u inactive NO COMMENTS
channel-admin-down 24u channelDown NO COMMENTS
channel-err-disabled 25u Channel error-disabled-err-disabled NO COMMENTS
suspended 26u suspnd NO COMMENTS
proto-port-suspend 27u portSuspnd NO COMMENTS
channel-membership-update-in-progress 28u channelUpdate NO COMMENTS
parent-down 29u parentDown NO COMMENTS
admin-down 2u disabled This port is down because it is admin down
parent-admin-down 30u adminDown-parentDown NO COMMENTS
interface-removed 31u ifRemoved NO COMMENTS
fcot-no-present 32u sfpAbsent fcotAbsent is more correct, but vsh uses sfpAbsent.
fcot-vendor-not-supported 33u SFP vendor not supported-err-disabled NO COMMENTS
incompatible-admin-mode 34u errDisabledIncompatPortMode-err-disabled NO COMMENTS
incompatible-admin-speed 35u errDisabledIncompatPortSpeed-err-disabled NO COMMENTS
suspended-by-mode 36u suspended-by-mode NO COMMENTS
suspended-by-speed 37u suspended-by-speed NO COMMENTS
domain-max-retransmission-failure 38u domMaxRetransFailIsolated NO COMMENTS
loopback-isolation 39u loopbackIsolated NO COMMENTS
link-down 3u parentEthDown The link is down
upgrade-in-progress 40u modUpgrade NO COMMENTS
port-channel-members-down 41u noOperMembers NO COMMENTS
ethernet-link-down 42u parentEthDown NO COMMENTS
ethernet-interface-down 43u interface-parentEthDown NO COMMENTS
admin-config-change 44u adminCfgChng NO COMMENTS
module-removed 45u modRemoved NO COMMENTS
vrf-unusable 46u vrfUnusable NO COMMENTS
none 47u connected NO COMMENTS
xcvr-initializing 48u sfpInit NO COMMENTS
cap-absent 49u capAbsent NO COMMENTS
fail 4u fail The link is failed state
sfp-eth-compliant-err 50u xcvrEthComplianceErr NO COMMENTS
sdp-timeout 51u SDP timeout/SFP Mismatch NO COMMENTS
sat-incompat-topo 52u FEX identity mismatch NO COMMENTS
sat-not-configured 53u FEX not configured NO COMMENTS
auth-fail 54u xcvrAuthFailed NO COMMENTS
auth-pending 55u authPending NO COMMENTS
suspended-due-to-minlinks 56u suspendedMinLinks NO COMMENTS
suspended-due-to-no-lacp-pdus 57u suspended(no LACP PDUs) NO COMMENTS
sat-fabric-if-down 58u fabrcIfDown NO COMMENTS
invalid-sat-fabric-if 59u invalidFbIf NO COMMENTS
no-license 5u portLicNtAvl The port has no valid license
fex-sfp-invalid 60u FEX-fabric sfp invalid NO COMMENTS
suspend-by-mtu 61u mtuFailure NO COMMENTS
suspend-by-vpc 62u suspndByVpc NO COMMENTS
router-mac-failure 63u routrmacFail NO COMMENTS
xcvr-auth-failed 64u xcvrAuthFailed NO COMMENTS
non-sticky-externally-disabled 65u ServDisab NO COMMENTS
sfp-speed-mismatch 66u xcvrSpeedMismatch NO COMMENTS
fcot-chksum-err 67u SFP checksum error NO COMMENTS
xcvr-invalid 68u Transceiver validation failed NO COMMENTS
vpc-peer-link-down 69u vpcPeerLinkDown NO COMMENTS
link-up 6u link-up-connected The link is up
vpc-cfg-in-progress 70u vpcConfigInProgress NO COMMENTS
vpc-no-response-from-peer 71u noRespFrmVpc NO COMMENTS
bpdu-guard-err-disable 72u BPDUGuard errDisable NO COMMENTS
hot-standby-in-bundle 73u htStdbyInBndl NO COMMENTS
handshake-fail-errdisable 74u intFailErrDis NO COMMENTS
mcp-loop-err-disable 75u mcpLoop errDisable NO COMMENTS
epm-learn-err-disable 76u epmLearn errDisable NO COMMENTS
mac-pinning 77u macPinning NO COMMENTS
fabric-track 78u fabricTrack NO COMMENTS
configuration-incomplete 79u incomplete config NO COMMENTS
hw-fail 7u faulty This port has a hardware failure
ethernet-vlan-down 80u parentVlanDown NO COMMENTS
link-fail-reset 81u linkReset NO COMMENTS
vfc-binding-invalid 82u vfcBindingInvalid NO COMMENTS
vlan-not-fcoe-enabled 83u vlanNotFcoeEnabled NO COMMENTS
ethernet-invalid-binding 84u parentInvalidBinding NO COMMENTS
link-fail-port-unusable 85u linkFailPortUnusable NO COMMENTS
diag-failure-errdisable 86u diag failure errDisable NO COMMENTS
incompatible-fecmode 87u errDisabledIncompatFECMode-err-disabled NO COMMENTS
npm-no-ext-link 88u NPV upstream port not available NO COMMENTS
port-reinit-limit 89u Port reinit threshold reached NO COMMENTS
sw-fail 8u faulty This port has a software failure
npiv-not-enb-upstream 90u NPIV upstream port not available NO COMMENTS
vsan-mismatch-upstream 91u VSAN mismatch with upstream port NO COMMENTS
pause-rate-limit-err-disable 92u pauseRateLimit errDisable NO COMMENTS
hw-disabled 93u hwDisabled NO COMMENTS
dot1x-security-errdisable 94u dot1xSecurityErrDisable NO COMMENTS
dcx-noack-in-100pdus 95u dcxNoACKin100PDUs NO COMMENTS
bundle-cfg-mismatch 96u bundleCfgMismatch NO COMMENTS
unsupported-platform-l3po 97u unsupportedPlatformL3Po NO COMMENTS
bit-err-rt-thres-exceeded 98u bitEThrshExc NO COMMENTS
bundle-miscfg 99u err-disabled NO COMMENTS
err-disabled 9u err-disabled The port is in err disable mode
DEFAULT admin-down(2u) disabled This port is down because it is admin down




operStQualCode

Type: l1:OperStQualCode
Primitive Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational port status syserror code


operVlans

Type: l2:VlanBitmap
Primitive Type: base:BitArray4096

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
operational vlans


osSum

Type: nw:OSSum
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Operational state summary
Constants
failed 0 Failed Failed
initializing 1 Initializing Initializing
resetting 2 Resetting Resetting
degraded 3 Degraded Degraded
ok 4 Ok Ok
DEFAULT ok(4) Ok Ok




portCfgWaitFlags

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port config wait flags


primaryVlan

Type: base:Encap

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port primary-vlan


resetCtr

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
reset counter


rn

Type: reference:BinRN

Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
    Comments:
Identifies an object from its siblings within the context of its parent object. The distinguished name contains a sequence of relative names.


siList

Type: ethpm:SiBitmap
Primitive Type: base:BitArray4096

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
configured sub-interface ids


status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32

Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
    Comments:
The upgrade status. This property is for internal use only.
Constants
created 2u created In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u modified In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u deleted In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 --- This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.





txT

Type: l1:TxT
Primitive Type: scalar:Enum8

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port Tx type
Constants
unknown 1 unknown NO COMMENTS
LL 2 LL NO COMMENTS
SN 3 SN NO COMMENTS
LC 4 LC NO COMMENTS
EL 5 EL NO COMMENTS
10GBASE-SR 6 10GBASE-SR NO COMMENTS
10GBASE-LR 7 10GBASE-LR NO COMMENTS
10GBASE-ER 8 10GBASE-ER NO COMMENTS
10GBASE-LX4 9 10GBASE-LX4 NO COMMENTS
10GBASE-SW 10 10GBASE-SW NO COMMENTS
10GBASE-LW 11 10GBASE-LW NO COMMENTS
10GBASE-EW 12 10GBASE-EW NO COMMENTS
DEFAULT unknown(1) unknown NO COMMENTS




usage

Type: l1:PortUsage
Primitive Type: scalar:Bitmask32

Like: l1:EthIf:usage
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
Constants
out-of-service 128u Out Of Service NO COMMENTS
controller 16u Controller NO COMMENTS
discovery 1u Discovery NO COMMENTS
fabric-ext 256u Fabric External NO COMMENTS
epg 2u EPG NO COMMENTS
blacklist 32u Black listed NO COMMENTS
fabric 4u Fabric NO COMMENTS
span 64u Span NO COMMENTS
infra 8u Infra NO COMMENTS
DEFAULT discovery(1u) Discovery NO COMMENTS




userCfgdFlags

Type: scalar:Uint32

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
port user config flags


vdcId

Type: l2:VdcId
Primitive Type: scalar:Uint16

Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
    Comments:
vdc id




Overview  Naming  Diagram  Containers  Contained  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail