Overview  Containers  Contained  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail  Naming 

Class equipment:SystemIOController (CONCRETE)

Class ID:2260
Encrypted: false - Exportable: false - Persistent: true
Privileges: [admin, ls-network, ls-network-policy, pn-equipment, pn-maintenance, pn-policy]
SNMP OID: .1.3.6.1.4.1.9.9.719.1.38.184

Represents a SIOC on a Colusa 2 chassis

Naming Rules 
RN FORMAT: slot-[id]

    [1] PREFIX=slot- PROPERTY = id




DN FORMAT: 

[0] sys/chassis-[id]/slot-[id]


Containers Hierarchies
top:Root This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.
 ├
 		top:System Provides general information about this system, such as the name, IP address and current time.
 
 		 ├
 		equipment:Chassis A physical unit that can accomodate multiple blade servers. For example, the Cisco UCS 5108 Blade Server Chassis is six rack units (6RU) high, can mount in an industry-standard 19-inch rack and uses front-to-back cooling.
 
 		 
 		 ├
 		equipment:SystemIOController


Contained Hierarchy
equipment:SystemIOController
 ├
 		compute:BoardController Managed object representing a blade PLD such as CPLD, EPLD, and FPGAs for sanfrancisco blade.
 
 		 ├
 		mgmt:Controller Controller
 
 		 
 		 ├
 		cimcvmedia:ActualMountList This is the container for ActualMountEntries and maintained under computePhysicalMo
 
 		 
 		 
 		 ├
 		cimcvmedia:ActualMountEntry This MO represents the deployed configuration for each of the vmedia mappings(ex:CD or HDD)
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		cimcvmedia:ExtMgmtRuleEntry This Mo represents the deployed configuration for the ExtMgmtRules(ex:NAT/Firewall)
 
 		 
 		 ├
 		event:Inst
 
 		 
 		 ├
 		fabric:Locale
 
 		 
 		 
 		 ├
 		adaptor:ExtEthIfPc Network facing Ethernet port channel interface on a server adaptor. For example, on a network adaptor installed on a UCS blade, this MO represents the Ethernet port channel interface connected to the IO Module on the UCS chassis. In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
 
 		 
 		 
 		 
 		 ├
 		adaptor:ExtEthIfPcEp
 
 		 
 		 
 		 
 		 ├
 		dcx:VIf A Virtual Interface.
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX. This MO is created implicitly to represent a circuit between two end-points
 
 		 
 		 
 		 
 		 ├
 		fabric:ANetGroupRef
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:Cmclan
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetGroupRef
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:NetflowMonitorRef
 
 		 
 		 
 		 
 		 ├
 		sw:Ulan
 
 		 
 		 
 		 
 		 ├
 		sw:Vlan
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect for exporting flow records to the external collector using the same user specified VLAN. A different source ip is used for each of these vNIC.
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:Vsan A Vsan
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZoneSet
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcServerZoneGroup
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneInitiatorMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneTargetMember
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset.
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcEndpoint Fc Zone Initiator/Target Member
 
 		 
 		 
 		 ├
 		fabric:Path
 
 		 
 		 
 		 
 		 ├
 		dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX. This MO is created implicitly to represent a circuit between two end-points
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:ANetGroupRef
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Cmclan
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetGroupRef
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:NetflowMonitorRef
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Ulan
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Vlan
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect for exporting flow records to the external collector using the same user specified VLAN. A different source ip is used for each of these vNIC.
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Vsan A Vsan
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZoneSet
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcServerZoneGroup
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneInitiatorMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneTargetMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset.
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcEndpoint Fc Zone Initiator/Target Member
 
 		 
 		 
 		 
 		 ├
 		fabric:PathConn
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:PathEp
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		port:TrustMode
 
 		 
 		 
 		 
 		 ├
 		fabric:PathEp
 
 		 
 		 
 		 
 		 
 		 ├
 		port:TrustMode
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		firmware:BootDefinition Container for BootUnit objects. This is needed since some components (like switch) have more then one BootUnit objects.
 
 		 
 		 
 		 ├
 		firmware:BootUnit
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		firmware:Installable Represents a logical image that can be installed on an end-point. Ech physical File can have one or more installables. This is to Support Model changes without any software change. Created implicitely as part of download operation.
 
 		 
 		 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 
 		 
 		 
 		 ├
 		firmware:ServicePack Representation of firmware image version that is loaded at reboot. Applicable to all the components that supports one or more backup image(s).
 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 
 		 ├
 		firmware:Running Representation of primary firmware image (Currently running)
 
 		 
 		 
 		 ├
 		firmware:ServicePack Representation of firmware image version that is loaded at reboot. Applicable to all the components that supports one or more backup image(s).
 
 		 
 		 ├
 		firmware:Updatable Representation of backup firmware image for the chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		firmware:Installable Represents a logical image that can be installed on an end-point. Ech physical File can have one or more installables. This is to Support Model changes without any software change. Created implicitely as part of download operation.
 
 		 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 
 		 ├
 		mgmt:ASecureBoot MO used to hold the admin and operational state of the secure boot status of the BMC/CMC.
 
 		 
 		 ├
 		mgmt:Connection
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		mgmt:ControllerFsm
 
 		 
 		 
 		 ├
 		mgmt:ControllerFsmStage
 
 		 
 		 ├
 		mgmt:ControllerFsmTask
 
 		 
 		 ├
 		mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		mgmt:HealthAttr This MO represents health attributes from BMC/CMC
 
 		 
 		 ├
 		mgmt:If Encapsulates the configuration of a CIMC management interface.
 
 		 
 		 
 		 ├
 		dhcp:Acquired
 
 		 
 		 
 		 ├
 		event:Inst
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		mgmt:IPv6IfConfig
 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddr
 
 		 
 		 
 		 
 		 
 		 ├
 		event:Inst
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsm
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsmStage
 
 		 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsmTask
 
 		 
 		 
 		 ├
 		mgmt:IfFsm
 
 		 
 		 
 		 
 		 ├
 		mgmt:IfFsmStage
 
 		 
 		 
 		 ├
 		mgmt:IfFsmTask
 
 		 
 		 ├
 		mgmt:Interface
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		mgmt:Vnet
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV4AddrExplConf
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV6AddrExplConf
 
 		 
 		 ├
 		mgmt:KvmCertificate
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		mgmt:ProfDerivedInterface This MO represents how a logical server profile is configured for CIMC management.
 
 		 
 		 
 		 ├
 		mgmt:Vnet
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV4AddrExplConf
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV6AddrExplConf
 
 		 
 		 ├
 		mgmt:UsbNicMgmtIf
 
 		 
 		 ├
 		sysdebug:MEpLog This object represents the status of a remote managed end-point log.
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		vnic:IpV4PooledAddr Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
 
 		 
 		 ├
 		vnic:IpV4ProfDerivedAddr
 
 		 
 		 ├
 		vnic:IpV4StaticAddr Represents a statically assigned IPv4 address.
 ├
 		equipment:SharedIOModule Represents an inventoried Shared IO Module on a device
 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 ├
 		mgmt:Controller Controller
 
 		 
 		 ├
 		cimcvmedia:ActualMountList This is the container for ActualMountEntries and maintained under computePhysicalMo
 
 		 
 		 
 		 ├
 		cimcvmedia:ActualMountEntry This MO represents the deployed configuration for each of the vmedia mappings(ex:CD or HDD)
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		cimcvmedia:ExtMgmtRuleEntry This Mo represents the deployed configuration for the ExtMgmtRules(ex:NAT/Firewall)
 
 		 
 		 ├
 		event:Inst
 
 		 
 		 ├
 		fabric:Locale
 
 		 
 		 
 		 ├
 		adaptor:ExtEthIfPc Network facing Ethernet port channel interface on a server adaptor. For example, on a network adaptor installed on a UCS blade, this MO represents the Ethernet port channel interface connected to the IO Module on the UCS chassis. In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
 
 		 
 		 
 		 
 		 ├
 		adaptor:ExtEthIfPcEp
 
 		 
 		 
 		 
 		 ├
 		dcx:VIf A Virtual Interface.
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX. This MO is created implicitly to represent a circuit between two end-points
 
 		 
 		 
 		 
 		 ├
 		fabric:ANetGroupRef
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:Cmclan
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetGroupRef
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:NetflowMonitorRef
 
 		 
 		 
 		 
 		 ├
 		sw:Ulan
 
 		 
 		 
 		 
 		 ├
 		sw:Vlan
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect for exporting flow records to the external collector using the same user specified VLAN. A different source ip is used for each of these vNIC.
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:Vsan A Vsan
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZoneSet
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcServerZoneGroup
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneInitiatorMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneTargetMember
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset.
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcEndpoint Fc Zone Initiator/Target Member
 
 		 
 		 
 		 ├
 		fabric:Path
 
 		 
 		 
 		 
 		 ├
 		dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX. This MO is created implicitly to represent a circuit between two end-points
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:ANetGroupRef
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Cmclan
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetGroupRef
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:NetflowMonitorRef
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Ulan
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Vlan
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect for exporting flow records to the external collector using the same user specified VLAN. A different source ip is used for each of these vNIC.
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:Vsan A Vsan
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZoneSet
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcServerZoneGroup
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneInitiatorMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneTargetMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset.
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcEndpoint Fc Zone Initiator/Target Member
 
 		 
 		 
 		 
 		 ├
 		fabric:PathConn
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:PathEp
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		port:TrustMode
 
 		 
 		 
 		 
 		 ├
 		fabric:PathEp
 
 		 
 		 
 		 
 		 
 		 ├
 		port:TrustMode
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		firmware:BootDefinition Container for BootUnit objects. This is needed since some components (like switch) have more then one BootUnit objects.
 
 		 
 		 
 		 ├
 		firmware:BootUnit
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		firmware:Installable Represents a logical image that can be installed on an end-point. Ech physical File can have one or more installables. This is to Support Model changes without any software change. Created implicitely as part of download operation.
 
 		 
 		 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 
 		 
 		 
 		 ├
 		firmware:ServicePack Representation of firmware image version that is loaded at reboot. Applicable to all the components that supports one or more backup image(s).
 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 
 		 ├
 		firmware:Running Representation of primary firmware image (Currently running)
 
 		 
 		 
 		 ├
 		firmware:ServicePack Representation of firmware image version that is loaded at reboot. Applicable to all the components that supports one or more backup image(s).
 
 		 
 		 ├
 		firmware:Updatable Representation of backup firmware image for the chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		firmware:Installable Represents a logical image that can be installed on an end-point. Ech physical File can have one or more installables. This is to Support Model changes without any software change. Created implicitely as part of download operation.
 
 		 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 
 		 ├
 		mgmt:ASecureBoot MO used to hold the admin and operational state of the secure boot status of the BMC/CMC.
 
 		 
 		 ├
 		mgmt:Connection
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		mgmt:ControllerFsm
 
 		 
 		 
 		 ├
 		mgmt:ControllerFsmStage
 
 		 
 		 ├
 		mgmt:ControllerFsmTask
 
 		 
 		 ├
 		mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		mgmt:HealthAttr This MO represents health attributes from BMC/CMC
 
 		 
 		 ├
 		mgmt:If Encapsulates the configuration of a CIMC management interface.
 
 		 
 		 
 		 ├
 		dhcp:Acquired
 
 		 
 		 
 		 ├
 		event:Inst
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		mgmt:IPv6IfConfig
 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddr
 
 		 
 		 
 		 
 		 
 		 ├
 		event:Inst
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsm
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsmStage
 
 		 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsmTask
 
 		 
 		 
 		 ├
 		mgmt:IfFsm
 
 		 
 		 
 		 
 		 ├
 		mgmt:IfFsmStage
 
 		 
 		 
 		 ├
 		mgmt:IfFsmTask
 
 		 
 		 ├
 		mgmt:Interface
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		mgmt:Vnet
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV4AddrExplConf
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV6AddrExplConf
 
 		 
 		 ├
 		mgmt:KvmCertificate
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		mgmt:ProfDerivedInterface This MO represents how a logical server profile is configured for CIMC management.
 
 		 
 		 
 		 ├
 		mgmt:Vnet
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV4AddrExplConf
 
 		 
 		 
 		 
 		 ├
 		vnic:IpV6AddrExplConf
 
 		 
 		 ├
 		mgmt:UsbNicMgmtIf
 
 		 
 		 ├
 		sysdebug:MEpLog This object represents the status of a remote managed end-point log.
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		vnic:IpV4PooledAddr Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
 
 		 
 		 ├
 		vnic:IpV4ProfDerivedAddr
 
 		 
 		 ├
 		vnic:IpV4StaticAddr Represents a statically assigned IPv4 address.
 
 		 ├
 		port:Group A collection of physical ports on a device. A port group is created implicitly during device discovery of IO devices such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis. All the ports in a portGroup have the same type (i.e. FC, Ethernet).
 
 		 
 		 ├
 		ether:ServerIntFIoPc
 
 		 
 		 
 		 ├
 		ether:ServerIntFIoPcEp
 
 		 
 		 ├
 		ether:SwitchIntFIoPc
 
 		 
 		 
 		 ├
 		ether:NiErrStats
 
 		 
 		 
 		 
 		 ├
 		ether:NiErrStatsHist
 
 		 
 		 
 		 ├
 		ether:SwitchIntFIoPcEp
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		port:IntFIo Abstraction of a physical port on an IO Card.
 
 		 
 		 ├
 		port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
 
 		 
 		 
 		 ├
 		equipment:Xcvr
 
 		 
 		 
 		 ├
 		event:Inst
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		lldp:Acquired
 
 		 
 		 
 		 ├
 		network:IfStats
 
 		 
 		 
 		 ├
 		port:DomainEp
 
 		 
 		 
 		 ├
 		port:PIoFsm
 
 		 
 		 
 		 
 		 ├
 		port:PIoFsmStage
 
 		 
 		 
 		 ├
 		port:PIoFsmTask
 
 		 
 		 ├
 		port:SubGroup A SubGroup contains ports which are made availabe by connecting a break-out cable to an aggregated port. Example in UCS-Mini a 40GB Scalability port is connected to a 4x10GB breakout cable to get 4 10GB ports.
 
 		 
 		 
 		 ├
 		port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
 
 		 
 		 
 		 
 		 ├
 		equipment:Xcvr
 
 		 
 		 
 		 
 		 ├
 		event:Inst
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		lldp:Acquired
 
 		 
 		 
 		 
 		 ├
 		network:IfStats
 
 		 
 		 
 		 
 		 ├
 		port:DomainEp
 
 		 
 		 
 		 
 		 ├
 		port:PIoFsm
 
 		 
 		 
 		 
 		 
 		 ├
 		port:PIoFsmStage
 
 		 
 		 
 		 
 		 ├
 		port:PIoFsmTask
 ├
 		equipment:SiocTempStats
 
 		 ├
 		equipment:SiocTempStatsHist
 ├
 		equipment:SystemIOControllerFsm
 
 		 ├
 		equipment:SystemIOControllerFsmStage
 ├
 		equipment:SystemIOControllerFsmTask
 ├
 		event:Inst
 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 ├
 		mgmt:Controller Controller
 
 		 ├
 		cimcvmedia:ActualMountList This is the container for ActualMountEntries and maintained under computePhysicalMo
 
 		 
 		 ├
 		cimcvmedia:ActualMountEntry This MO represents the deployed configuration for each of the vmedia mappings(ex:CD or HDD)
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		cimcvmedia:ExtMgmtRuleEntry This Mo represents the deployed configuration for the ExtMgmtRules(ex:NAT/Firewall)
 
 		 ├
 		event:Inst
 
 		 ├
 		fabric:Locale
 
 		 
 		 ├
 		adaptor:ExtEthIfPc Network facing Ethernet port channel interface on a server adaptor. For example, on a network adaptor installed on a UCS blade, this MO represents the Ethernet port channel interface connected to the IO Module on the UCS chassis. In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
 
 		 
 		 
 		 ├
 		adaptor:ExtEthIfPcEp
 
 		 
 		 
 		 ├
 		dcx:VIf A Virtual Interface.
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX. This MO is created implicitly to represent a circuit between two end-points
 
 		 
 		 
 		 ├
 		fabric:ANetGroupRef
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		sw:Cmclan
 
 		 
 		 
 		 
 		 ├
 		fabric:NetGroupRef
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		sw:NetflowMonitorRef
 
 		 
 		 
 		 ├
 		sw:Ulan
 
 		 
 		 
 		 ├
 		sw:Vlan
 
 		 
 		 
 		 
 		 ├
 		fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect for exporting flow records to the external collector using the same user specified VLAN. A different source ip is used for each of these vNIC.
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		sw:Vsan A Vsan
 
 		 
 		 
 		 
 		 ├
 		sw:FcZoneSet
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcServerZoneGroup
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneInitiatorMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneTargetMember
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset.
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcEndpoint Fc Zone Initiator/Target Member
 
 		 
 		 ├
 		fabric:Path
 
 		 
 		 
 		 ├
 		dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX. This MO is created implicitly to represent a circuit between two end-points
 
 		 
 		 
 		 
 		 ├
 		fabric:ANetGroupRef
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:Cmclan
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetGroupRef
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:NetflowMonitorRef
 
 		 
 		 
 		 
 		 ├
 		sw:Ulan
 
 		 
 		 
 		 
 		 ├
 		sw:Vlan
 
 		 
 		 
 		 
 		 
 		 ├
 		fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect for exporting flow records to the external collector using the same user specified VLAN. A different source ip is used for each of these vNIC.
 
 		 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		sw:Vsan A Vsan
 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZoneSet
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcServerZoneGroup
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneInitiatorMember
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:ZoneTargetMember
 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset.
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcUserZone
 
 		 
 		 
 		 
 		 
 		 
 		 
 		 
 		 ├
 		sw:FcEndpoint Fc Zone Initiator/Target Member
 
 		 
 		 
 		 ├
 		fabric:PathConn
 
 		 
 		 
 		 
 		 ├
 		fabric:PathEp
 
 		 
 		 
 		 
 		 
 		 ├
 		port:TrustMode
 
 		 
 		 
 		 ├
 		fabric:PathEp
 
 		 
 		 
 		 
 		 ├
 		port:TrustMode
 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 ├
 		firmware:BootDefinition Container for BootUnit objects. This is needed since some components (like switch) have more then one BootUnit objects.
 
 		 
 		 ├
 		firmware:BootUnit
 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 ├
 		firmware:Installable Represents a logical image that can be installed on an end-point. Ech physical File can have one or more installables. This is to Support Model changes without any software change. Created implicitely as part of download operation.
 
 		 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 
 		 
 		 ├
 		firmware:ServicePack Representation of firmware image version that is loaded at reboot. Applicable to all the components that supports one or more backup image(s).
 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 ├
 		firmware:Running Representation of primary firmware image (Currently running)
 
 		 
 		 ├
 		firmware:ServicePack Representation of firmware image version that is loaded at reboot. Applicable to all the components that supports one or more backup image(s).
 
 		 ├
 		firmware:Updatable Representation of backup firmware image for the chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		firmware:Installable Represents a logical image that can be installed on an end-point. Ech physical File can have one or more installables. This is to Support Model changes without any software change. Created implicitely as part of download operation.
 
 		 
 		 
 		 ├
 		firmware:UcscInfo
 
 		 ├
 		mgmt:ASecureBoot MO used to hold the admin and operational state of the secure boot status of the BMC/CMC.
 
 		 ├
 		mgmt:Connection
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 ├
 		mgmt:ControllerFsm
 
 		 
 		 ├
 		mgmt:ControllerFsmStage
 
 		 ├
 		mgmt:ControllerFsmTask
 
 		 ├
 		mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		mgmt:HealthAttr This MO represents health attributes from BMC/CMC
 
 		 ├
 		mgmt:If Encapsulates the configuration of a CIMC management interface.
 
 		 
 		 ├
 		dhcp:Acquired
 
 		 
 		 ├
 		event:Inst
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		mgmt:IPv6IfConfig
 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddr
 
 		 
 		 
 		 
 		 ├
 		event:Inst
 
 		 
 		 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsm
 
 		 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsmStage
 
 		 
 		 
 		 
 		 ├
 		mgmt:IPv6IfAddrFsmTask
 
 		 
 		 ├
 		mgmt:IfFsm
 
 		 
 		 
 		 ├
 		mgmt:IfFsmStage
 
 		 
 		 ├
 		mgmt:IfFsmTask
 
 		 ├
 		mgmt:Interface
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		mgmt:Vnet
 
 		 
 		 
 		 ├
 		vnic:IpV4AddrExplConf
 
 		 
 		 
 		 ├
 		vnic:IpV6AddrExplConf
 
 		 ├
 		mgmt:KvmCertificate
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 ├
 		mgmt:ProfDerivedInterface This MO represents how a logical server profile is configured for CIMC management.
 
 		 
 		 ├
 		mgmt:Vnet
 
 		 
 		 
 		 ├
 		vnic:IpV4AddrExplConf
 
 		 
 		 
 		 ├
 		vnic:IpV6AddrExplConf
 
 		 ├
 		mgmt:UsbNicMgmtIf
 
 		 ├
 		sysdebug:MEpLog This object represents the status of a remote managed end-point log.
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 ├
 		vnic:IpV4PooledAddr Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
 
 		 
 		 ├
 		fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure, as defined in ISO/CD 10303-226.
 
 		 
 		 ├
 		vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
 
 		 ├
 		vnic:IpV4ProfDerivedAddr
 
 		 ├
 		vnic:IpV4StaticAddr Represents a statically assigned IPv4 address.
Inheritance
equipment:Item
 ├
 		equipment:Stateful
 
 		 ├
 		equipment:StatefulChComp
 
 		 
 		 ├
 		equipment:Card
 
 		 
 		 
 		 ├
 		equipment:SystemIOController
Events


Faults 
                equipment:SystemIOController:removed

                equipment:SystemIOController:thermalProblem

                equipment:SystemIOController:unacknowledged


Fsms 
                equipment:SystemIOController:ResetCmc


Properties Summary
Defined in: equipment:SystemIOController
equipment:AdminPowerState
          scalar:Enum8 		adminPowerState  (equipment:SystemIOController:adminPowerState)
           NO COMMENTS
equipment:ChassisAdminState
          scalar:Enum8 		adminState  (equipment:SystemIOController:adminState)
           TBD: Should transmod be specified as is done for equipment::IOCard::AdminState
naming:UserLabel
          string:Basic 		assetTag  (equipment:SystemIOController:assetTag)
           NO COMMENTS
equipment:ChassisId
          scalar:Uint32 		chassisId  (equipment:SystemIOController:chassisId)
           NO COMMENTS
compute:CheckPoint
          scalar:Enum8 		checkPoint  (equipment:SystemIOController:checkPoint)
           NO COMMENTS
equipment:ChassisConfigState
          scalar:Enum8 		configState  (equipment:SystemIOController:configState)
           NO COMMENTS
equipment:ConnectionStatus
          scalar:Bitmask8 		connPath  (equipment:SystemIOController:connPath)
           Physical Connection Path Definition
equipment:ConnectionStatus
          scalar:Bitmask8 		connStatus  (equipment:SystemIOController:connStatus)
           Current End Point Connectivity Information
equipment:DiscoveryState
          scalar:Enum8 		discovery  (equipment:SystemIOController:discovery)
           this is the state reported by switch
fsm:Descr
          string:Basic 		fsmDescr  (equipment:SystemIOController:fsmDescr)
           NO COMMENTS
equipment:SystemIOControllerFsmStatus
          scalar:Enum32 		fsmPrev  (equipment:SystemIOController:fsmPrev)
           NO COMMENTS
fsm:Progress
          scalar:UByte 		fsmProgr  (equipment:SystemIOController:fsmProgr)
           NO COMMENTS
condition:ErrCode
          scalar:Uint32 		fsmRmtInvErrCode  (equipment:SystemIOController:fsmRmtInvErrCode)
           NO COMMENTS
string:Basic fsmRmtInvErrDescr  (equipment:SystemIOController:fsmRmtInvErrDescr)
           NO COMMENTS
condition:RemoteInvRslt
          scalar:Bitmask32 		fsmRmtInvRslt  (equipment:SystemIOController:fsmRmtInvRslt)
           NO COMMENTS
fsm:Descr
          string:Basic 		fsmStageDescr  (equipment:SystemIOController:fsmStageDescr)
           NO COMMENTS
scalar:Date fsmStamp  (equipment:SystemIOController:fsmStamp)
           NO COMMENTS
equipment:SystemIOControllerFsmStatus
          scalar:Enum32 		fsmStatus  (equipment:SystemIOController:fsmStatus)
           NO COMMENTS
scalar:UByte fsmTry  (equipment:SystemIOController:fsmTry)
           NO COMMENTS
equipment:Id
          scalar:Uint32 		id  (equipment:SystemIOController:id)
           Overrides:equipment:Item:id
           NO COMMENTS
naming:Name
          string:Basic 		lcName  (equipment:SystemIOController:lcName)
           NO COMMENTS
scalar:Date lcTs  (equipment:SystemIOController:lcTs)
           life cycle timestamp used for internal purposes
network:SwitchId
          scalar:Enum8 		managingInstance  (equipment:SystemIOController:managingInstance)
           NO COMMENTS
scalar:Date mfgTime  (equipment:SystemIOController:mfgTime)
           NO COMMENTS
equipment:IOCardIssues
          scalar:Bitmask16 		operQualifier  (equipment:SystemIOController:operQualifier)
           NO COMMENTS
equipment:PartNumber
          string:Basic 		partNumber  (equipment:SystemIOController:partNumber)
           NO COMMENTS
scalar:Bool reInsert  (equipment:SystemIOController:reInsert)
           When SIOC re-insert is detected (presence state changes from 'Missing' to 'Equipped'), reInsert will be set to 'true'. When user performs SIOC re-acknowledge, re-Insert will be set to 'false'.
adaptor:Reachability
          scalar:Bitmask8 		reachability  (equipment:SystemIOController:reachability)
           NO COMMENTS
equipment:SiocRole
          scalar:Enum8 		role  (equipment:SystemIOController:role)
           NO COMMENTS
naming:UserLabel
          string:Basic 		usrLbl  (equipment:SystemIOController:usrLbl)
           NO COMMENTS
string:Basic vid  (equipment:SystemIOController:vid)
           NO COMMENTS
Defined in: equipment:Card
scalar:Uint64 fltAggr  (equipment:Card:fltAggr)
           NO COMMENTS
Defined in: equipment:StatefulChComp
equipment:OperQualifierReason
          string:Basic 		operQualifierReason  (equipment:StatefulChComp:operQualifierReason)
           Overrides:equipment:Stateful:operQualifierReason
           NO COMMENTS
equipment:Operability
          scalar:Enum8 		operState  (equipment:StatefulChComp:operState)
           NO COMMENTS
equipment:Operability
          scalar:Enum8 		operability  (equipment:StatefulChComp:operability)
           Overrides:equipment:Stateful:operability
           NO COMMENTS
equipment:SensorThresholdStatus
          scalar:Enum8 		perf  (equipment:StatefulChComp:perf)
           NO COMMENTS
equipment:PowerState
          scalar:Enum8 		power  (equipment:StatefulChComp:power)
           NO COMMENTS
equipment:Presence
          scalar:Enum8 		presence  (equipment:StatefulChComp:presence)
           Overrides:equipment:Stateful:presence
           NO COMMENTS
equipment:SensorThresholdStatus
          scalar:Enum8 		thermal  (equipment:StatefulChComp:thermal)
           NO COMMENTS
equipment:SensorThresholdStatus
          scalar:Enum8 		voltage  (equipment:StatefulChComp:voltage)
           NO COMMENTS
Defined in: equipment:Item
equipment:Model
          string:Basic 		model  (equipment:Item:model)
           NO COMMENTS
equipment:Revision
          string:Basic 		revision  (equipment:Item:revision)
           NO COMMENTS
equipment:Serial
          string:Basic 		serial  (equipment:Item:serial)
           NO COMMENTS
equipment:Vendor
          string:Basic 		vendor  (equipment:Item:vendor)
           NO COMMENTS
Defined in: mo:TopProps
mo:ModificationChildAction
          scalar:Bitmask32 		childAction  (mo:TopProps:childAction)
          
reference:Object dn  (mo:TopProps:dn)
           The Distinguished Name (dn) unambiguously identifies an object in the system.
The dn provides a fully qualified path from the top of the object tree, all the way to the object. It is built as a sequence of relative names separated by the "/" character.
For example:
< ... dn = "sys/chassis-5/blade-2/adaptor-1" />
reference:RN rn  (mo:TopProps:rn)
           The Relative Name (rn) uniquely identifies an object within a given context.
Note that a dn is comprised of a sequence of relative names. For example, the context "sys/chassis-1/blade-1/adaptor-1/host-eth-2" can be thought of as the following expression:
dn = <root object>/{rn}/{rn}/{rn}/{rn}/{rn}.
The rn can then be used to identify the object (for instance, "adaptor-1") within the context:
<... rn ="../" />
mo:InstSaclType
          scalar:Bitmask8 		sacl  (mo:TopProps:sacl)
           The system acl property for each Managed Object. br/> This property is a 8 bit mask and supports the following values :-
a: del
b: mod
c: addchild
d: cascade

By default all Managed Objects have the following permissions
a: del
b: mod
c: addchild
This property is persisted in the db. If this property has a value none
it means, the user has read only permissions on this object.
mo:ModificationStatus
          scalar:Bitmask32 		status  (mo:TopProps:status)
           This property controls the life cycle of a managed object
Properties Detail

adminPowerState

Type: equipment:AdminPowerState
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
policy 1 NO COMMENTS
cycle-immediate 2 NO COMMENTS
cycle-wait 3 NO COMMENTS
DEFAULT policy(1) NO COMMENTS

adminState

Type: equipment:ChassisAdminState
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:

Comments:
TBD: Should transmod be specified as is done for equipment::IOCard::AdminState
Constants
acknowledged 1 DISRUPTIVE!
re-acknowledge 2 - transient state; DISRUPTIVE! recommission chassis
decommission 3 Decommission chassis
remove 4 Remove chassis from inventory. Chassis must be physically removed
enable-port-channel 5 NO COMMENTS
disable-port-channel 6 NO COMMENTS
auto-acknowledge 7 auto-ack set on policy change
DEFAULT acknowledged(1) DISRUPTIVE!

assetTag

Type: naming:UserLabel
Primitive Type: string:Basic
Like: equipment:FruidInfo:assetTag
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "32"
        Allowed Chars:
            Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+

Comments:
NO COMMENTS

chassisId

Type: equipment:ChassisId
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: (long)0l  max: (long)255l

Comments:
NO COMMENTS
Constants
N/A 0u NO COMMENTS
DEFAULT 0 NO COMMENTS

checkPoint

Type: compute:CheckPoint
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
removing 1 NO COMMENTS
shallow-checkpoint 2 Indicates the system is performing a shallow discovery of the server. Shallow discovery is performed with no disruption of the operating system running on the server.
deep-checkpoint 3 Indicates the system is performing a deep discovery of the server. Deep discovery is performed in the following cases:
  • New blade is inserted in a chassis
  • Rack server is connected to the system
  • Server FRU does not match the inventory
  • API user explicitely request reacknowledgement of the server
discovered 4 Indicates the server has been discovered. This is the normal state after the server has been successfully discovered.
DEFAULT unknown(0) NO COMMENTS

childAction

Type: mo:ModificationChildAction
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelChildAction
Property Validators:

Comments:
Constants
deleteAll 16384u NO COMMENTS
ignore 4096u NO COMMENTS
deleteNonPresent 8192u NO COMMENTS
DEFAULT 0 This type is used to

configState

Type: equipment:ChassisConfigState
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
un-initialized 0 DISRUPTIVE!
un-acknowledged 1 NO COMMENTS
unsupported-connectivity 2 NO COMMENTS
ok 3 NO COMMENTS
removing 4 NO COMMENTS
ack-in-progress 6
evaluation 7 Used only for analyzing VIF NS change impact
acknowledged 8 NO COMMENTS
auto-ack 9 NO COMMENTS
DEFAULT un-acknowledged(1) NO COMMENTS

connPath

Type: equipment:ConnectionStatus
Primitive Type: scalar:Bitmask8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
Physical Connection Path Definition
Constants
unknown 0 NO COMMENTS
A 1 NO COMMENTS
B 2 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

connStatus

Type: equipment:ConnectionStatus
Primitive Type: scalar:Bitmask8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
Current End Point Connectivity Information
Constants
unknown 0 NO COMMENTS
A 1 NO COMMENTS
B 2 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

discovery

Type: equipment:DiscoveryState
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
this is the state reported by switch
Constants
unknown 0 NO COMMENTS
online 1 NO COMMENTS
offline 2 NO COMMENTS
discovered 3 NO COMMENTS
unsupported-connectivity 4 The device has been discovered but is connected in an unsupported configuration.
auto-upgrading 5 NO COMMENTS
pinglost 6 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

dn

Type: reference:Object
Units: null
Encrypted: false
Access: implicit
Category: TopLevelDn
Property Validators:

Comments:
The Distinguished Name (dn) unambiguously identifies an object in the system.
The dn provides a fully qualified path from the top of the object tree, all the way to the object. It is built as a sequence of relative names separated by the "/" character.
For example:
< ... dn = "sys/chassis-5/blade-2/adaptor-1" />

fltAggr

Type: scalar:Uint64
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS

fsmDescr

Type: fsm:Descr
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "256"
        Allowed Chars:
            Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+

Comments:
NO COMMENTS

fsmPrev

Type: equipment:SystemIOControllerFsmStatus
Primitive Type: scalar:Enum32
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
nop 0u NO COMMENTS
ResetCmcBegin 2035u NO COMMENTS
ResetCmcExecute 2036u NO COMMENTS
ResetCmcFail 2171u NO COMMENTS
ResetCmcSuccess 2172u NO COMMENTS
DEFAULT nop(0u) NO COMMENTS

fsmProgr

Type: fsm:Progress
Primitive Type: scalar:UByte
Units: %
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
    Range:  min: (short)0  max: (short)100

Comments:
NO COMMENTS
Constants
defaultValue 100 NO COMMENTS

fsmRmtInvErrCode

Type: condition:ErrCode
Primitive Type: scalar:Uint32
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
none 0u NO COMMENTS
ERR-MO-illegal-iterator-state 100u NO COMMENTS
ERR-MO-illegal-object-lifecycle-transition 101u NO COMMENTS
ERR-MO-object-not-found 102u NO COMMENTS
ERR-MO-duplicate-object 103u NO COMMENTS
ERR-MO-naming-rule-violation 104u NO COMMENTS
ERR-MO-illegal-creation 105u NO COMMENTS
ERR-MO-illegal-containment 106u NO COMMENTS
ERR-MO-deletion-rule-violation 107u NO COMMENTS
ERR-MO-PROPERTY-value-out-of-range 120u NO COMMENTS
ERR-MO-PROPERTY-no-such-property 121u NO COMMENTS
ERR-MO-META-no-such-object-class 122u NO COMMENTS
ERR-MO-CONFIG-child-object-cant-be-configured 130u NO COMMENTS
ERR-FILTER-illegal-format 140u NO COMMENTS
ERR-MO-resource-allocation 150u NO COMMENTS
ERR-FSM-no-such-state 160u NO COMMENTS
ERR-MO-access-denied 170u NO COMMENTS
ERR-test-error-1 501u NO COMMENTS
ERR-test-error-2 502u NO COMMENTS
ERR-HOST-fru-identity-mismatch 503u NO COMMENTS
ERR-IBMC-connect-error 504u NO COMMENTS
ERR-IBMC-fru-retrieval-error 505u NO COMMENTS
ERR-IBMC-invalid-end-point-config 506u NO COMMENTS
ERR-SWITCH-invalid-if-config 507u NO COMMENTS
ERR-DNLD-authentication-failure 508u NO COMMENTS
ERR-DNLD-invalid-image 509u NO COMMENTS
ERR-DNLD-no-space 510u NO COMMENTS
ERR-DNLD-no-file 511u NO COMMENTS
ERR-radius-group-set-error 512u NO COMMENTS
ERR-ldap-group-set-error 513u NO COMMENTS
ERR-tacacs-group-set-error 514u NO COMMENTS
ERR-tacacs-enable-error 515u NO COMMENTS
ERR-radius-set-error 516u NO COMMENTS
ERR-radius-global-set-error 517u NO COMMENTS
ERR-tacacs-set-error 518u NO COMMENTS
ERR-tacacs-global-set-error 519u NO COMMENTS
ERR-ldap-get-error 520u NO COMMENTS
ERR-ldap-delete-error 521u NO COMMENTS
ERR-ldap-set-error 522u NO COMMENTS
ERR-acct-realm-set-error 523u NO COMMENTS
ERR-auth-realm-set-error 524u NO COMMENTS
ERR-role-set-error 525u NO COMMENTS
ERR-locale-set-error 526u NO COMMENTS
ERR-user-set-error 527u NO COMMENTS
ERR-NTP-set-error 528u NO COMMENTS
ERR-NTP-get-error 529u NO COMMENTS
ERR-NTP-delete-error 530u NO COMMENTS
ERR-DNS-set-error 531u NO COMMENTS
ERR-DNS-get-error 532u NO COMMENTS
ERR-DNS-delete-error 533u NO COMMENTS
ERR-UPDATE-in-progress 534u NO COMMENTS
ERR-UPDATE-failed 535u NO COMMENTS
ERR-UPDATE-retry 536u NO COMMENTS
ERR-admin-passwd-set 537u NO COMMENTS
ERR-delete-user 538u NO COMMENTS
ERR-create-user 539u NO COMMENTS
ERR-modify-user 540u NO COMMENTS
ERR-modify-role 541u NO COMMENTS
ERR-modify-locale 542u NO COMMENTS
ERR-modify-user-role 543u NO COMMENTS
ERR-modify-user-locale 544u NO COMMENTS
ERR-HTTP-set-error 545u NO COMMENTS
ERR-HTTPS-set-error 546u NO COMMENTS
ERR-timezone-set-error 547u NO COMMENTS
ERR-set-network 548u NO COMMENTS
ERR-set-port-channel 549u NO COMMENTS
ERR-BIOS-network-boot-order-not-found 550u NO COMMENTS
ERR-authentication 551u NO COMMENTS
ERR-authorization-required 552u NO COMMENTS
ERR-user-account-expired 553u NO COMMENTS
ERR-session-cache-full 554u NO COMMENTS
ERR-session-not-found 555u NO COMMENTS
ERR-service-not-ready 556u NO COMMENTS
ERR-internal-error 557u NO COMMENTS
ERR-create-role 558u NO COMMENTS
ERR-create-locale 559u NO COMMENTS
ERR-Diagnostics-in-progress 560u NO COMMENTS
ERR-Diagnostics-memtest-in-progress 561u NO COMMENTS
ERR-Diagnostics-network-in-progress 562u NO COMMENTS
ERR-delete-role 563u NO COMMENTS
ERR-delete-locale 564u NO COMMENTS
ERR-efi-Diagnostics--in-progress 565u NO COMMENTS
ERR-delete-session 566u NO COMMENTS
ERR-DNLD-hostkey-mismatch 567u NO COMMENTS
ERR-IBMC-results-not-ready 568u NO COMMENTS
ERR-IBMC-analyze-results 569u NO COMMENTS
ERR-create-keyring 570u NO COMMENTS
ERR-insufficiently-equipped 571u NO COMMENTS
ERR-max-userid-sessions-reached 572u NO COMMENTS
ERR-set-password-strength-check 573u NO COMMENTS
ERR-BOARDCTRLUPDATE-ignore 574u NO COMMENTS
ERR-DIAG-test-failed 575u NO COMMENTS
ERR-DIAG-cancelled 576u NO COMMENTS
ERR-DIAG-fsm-restarted 577u NO COMMENTS
ERR-UNABLE-TO-FETCH-BIOS-SETTINGS 578u NO COMMENTS
ERR-BIOS-TOKENS-OLD-BIOS 579u NO COMMENTS
ERR-BIOS-TOKENS-OLD-CIMC 580u NO COMMENTS
ERR-POWER-CAP-UNSUPPORTED 581u NO COMMENTS
ERR-provider-group-set-error 582u NO COMMENTS
ERR-ldap-group-modify-error 583u NO COMMENTS
ERR-provider-group-modify-error 584u NO COMMENTS
ERR-aaa-config-modify-error 585u NO COMMENTS
ERR-get-max-http-user-sessions 586u NO COMMENTS
ERR-SERVER-mis-connect 587u NO COMMENTS
ERR-store-pre-login-banner-msg 588u NO COMMENTS
ERR-ACTIVATE-in-progress 589u NO COMMENTS
ERR-ACTIVATE-failed 590u NO COMMENTS
ERR-ACTIVATE-retry 591u NO COMMENTS
ERR-request-timeout 592u NO COMMENTS
ERR-missing-method 593u NO COMMENTS
ERR-xml-parse-error 594u NO COMMENTS
ERR-auth-issue 595u NO COMMENTS
ERR-http-initializing 596u NO COMMENTS
ERR-secondary-node 597u NO COMMENTS
ERR-auth-realm-get-error 598u NO COMMENTS
ERR-radius-get-error 599u NO COMMENTS
ERR-tacacs-plus-get-error 600u NO COMMENTS
ERR-ep-set-error 601u NO COMMENTS
ERR-MAX-subscriptions-allowed-error 602u NO COMMENTS
ERR-enable-mgmt-conn 603u NO COMMENTS
ERR-reset-adapter 604u NO COMMENTS
ERR-TOKEN-request-denied 605u NO COMMENTS
ERR-cli-session-limit-reached 606u NO COMMENTS
ERR-2fa-auth-retry 607u NO COMMENTS
ERR-IBMC-connector-info-retrieval-error 608u NO COMMENTS
ERR-create-tp 609u NO COMMENTS
ERR-POWER-PROFILE-IN-PROGRESS 610u NO COMMENTS
ERR-DNLD-usb-unmounted 611u NO COMMENTS
ERR-downgrade-fail 612u NO COMMENTS
ERR-set-min-passphrase-length 613u NO COMMENTS
ERR-set-key-cert 614u NO COMMENTS
DEFAULT 0 NO COMMENTS

fsmRmtInvErrDescr

Type: string:Basic
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

fsmRmtInvRslt

Type: condition:RemoteInvRslt
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
not-applicable 0u NO COMMENTS
resource-unavailable 1024u NO COMMENTS
service-unavailable 1048576u NO COMMENTS
intermittent-error 1073741824u NO COMMENTS
sw-defect 128u NO COMMENTS
service-not-implemented-ignore 131072u NO COMMENTS
extend-timeout 134217728u NO COMMENTS
capability-not-implemented-failure 16384u NO COMMENTS
illegal-fru 16777216u NO COMMENTS
end-point-unavailable 16u NO COMMENTS
failure 1u NO COMMENTS
resource-capacity-exceeded 2048u NO COMMENTS
service-protocol-error 2097152u NO COMMENTS
fw-defect 256u NO COMMENTS
service-not-implemented-fail 262144u NO COMMENTS
task-reset 268435456u NO COMMENTS
unidentified-fail 2u NO COMMENTS
capability-not-supported 32768u NO COMMENTS
end-point-failed 32u NO COMMENTS
fru-state-indeterminate 33554432u NO COMMENTS
resource-dependency 4096u NO COMMENTS
fru-identity-indeterminate 4194304u NO COMMENTS
internal-error 4u NO COMMENTS
hw-defect 512u NO COMMENTS
service-not-supported 524288u NO COMMENTS
fru-not-supported 536870912u NO COMMENTS
end-point-protocol-error 64u NO COMMENTS
capability-unavailable 65536u NO COMMENTS
fru-not-ready 67108864u NO COMMENTS
capability-not-implemented-ignore 8192u NO COMMENTS
fru-info-malformed 8388608u NO COMMENTS
timeout 8u NO COMMENTS
DEFAULT not-applicable(0u) NO COMMENTS

fsmStageDescr

Type: fsm:Descr
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "256"
        Allowed Chars:
            Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+

Comments:
NO COMMENTS

fsmStamp

Type: scalar:Date
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
never 0ull NO COMMENTS
DEFAULT 0 NO COMMENTS

fsmStatus

Type: equipment:SystemIOControllerFsmStatus
Primitive Type: scalar:Enum32
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
nop 0u NO COMMENTS
ResetCmcBegin 2035u NO COMMENTS
ResetCmcExecute 2036u NO COMMENTS
ResetCmcFail 2171u NO COMMENTS
ResetCmcSuccess 2172u NO COMMENTS
DEFAULT nop(0u) NO COMMENTS

fsmTry

Type: scalar:UByte
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS

id

Type: equipment:Id
Primitive Type: scalar:Uint32
Overrides:equipment:Item:id
Units: null
Encrypted: false
Naming Property -- [NAMING RULES]
Access: naming
Category: TopLevelRegular
Property Validators:
    Range:  min: (long)1l  max: (long)2l

Comments:
NO COMMENTS

lcName

Type: naming:Name
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "16"
        Allowed Chars:
            Regex: [a-zA-Z0-9_.:-]+

Comments:
NO COMMENTS

lcTs

Type: scalar:Date
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
life cycle timestamp used for internal purposes

managingInstance

Type: network:SwitchId
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
NONE 0 NO COMMENTS
A 1 NO COMMENTS
B 2 NO COMMENTS
DEFAULT A(1) NO COMMENTS

mfgTime

Type: scalar:Date
Like: equipment:MfgInfo:mfgTime
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
not-applicable 0ull NO COMMENTS
DEFAULT not-applicable(0ull) NO COMMENTS

model

Type: equipment:Model
Primitive Type: string:Basic
Like: equipment:Info:model
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

operQualifier

Type: equipment:IOCardIssues
Primitive Type: scalar:Bitmask16
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
not-applicable 0 NO COMMENTS
thermal 1 NO COMMENTS
inoperable 2 NO COMMENTS
voltage 4 NO COMMENTS
perf 8 NO COMMENTS
power 16 NO COMMENTS
removed 32 NO COMMENTS
fabric-port-problem 64 NO COMMENTS
post-failure 128 NO COMMENTS
server-port-problem 256 NO COMMENTS
fabricpc-link-auto-ack-blocked 512 NO COMMENTS
backplane-port-problem 1024 NO COMMENTS
DEFAULT not-applicable(0) NO COMMENTS

operQualifierReason

Type: equipment:OperQualifierReason
Primitive Type: string:Basic
Overrides:equipment:Stateful:operQualifierReason
Paths: equipment:StatefulChCompIf:operQualifierReason
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "256"
        Allowed Chars:
            Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+

Comments:
NO COMMENTS
Constants
defaultValue "N/A" NO COMMENTS

operState

Type: equipment:Operability
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:operState
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
operable 1 NO COMMENTS
inoperable 2 NO COMMENTS
degraded 3 NO COMMENTS
powered-off 4 NO COMMENTS
power-problem 5 NO COMMENTS
removed 6 NO COMMENTS
voltage-problem 7 NO COMMENTS
thermal-problem 8 NO COMMENTS
performance-problem 9 NO COMMENTS
accessibility-problem 10 NO COMMENTS
identity-unestablishable 11 NO COMMENTS
bios-post-timeout 12 NO COMMENTS
disabled 13 NO COMMENTS
malformed-fru 14 NO COMMENTS
backplane-port-problem 15 NO COMMENTS
chassis-intrusion 16 NO COMMENTS
non-optimal 17 NO COMMENTS
unsupported-config 18 NO COMMENTS
fabric-conn-problem 51 NO COMMENTS
fabric-unsupported-conn 52 NO COMMENTS
config 81 NO COMMENTS
equipment-problem 82 NO COMMENTS
decomissioning 83 NO COMMENTS
chassis-limit-exceeded 84 NO COMMENTS
not-supported 100 NO COMMENTS
discovery 101 NO COMMENTS
discovery-failed 102 NO COMMENTS
identify 103 NO COMMENTS
post-failure 104 NO COMMENTS
upgrade-problem 105 NO COMMENTS
peer-comm-problem 106 NO COMMENTS
auto-upgrade 107 NO COMMENTS
link-activate-blocked 108 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

operability

Type: equipment:Operability
Primitive Type: scalar:Enum8
Overrides:equipment:Stateful:operability
Paths: equipment:StatefulChCompIf:operability
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
operable 1 NO COMMENTS
inoperable 2 NO COMMENTS
degraded 3 NO COMMENTS
powered-off 4 NO COMMENTS
power-problem 5 NO COMMENTS
removed 6 NO COMMENTS
voltage-problem 7 NO COMMENTS
thermal-problem 8 NO COMMENTS
performance-problem 9 NO COMMENTS
accessibility-problem 10 NO COMMENTS
identity-unestablishable 11 NO COMMENTS
bios-post-timeout 12 NO COMMENTS
disabled 13 NO COMMENTS
malformed-fru 14 NO COMMENTS
backplane-port-problem 15 NO COMMENTS
chassis-intrusion 16 NO COMMENTS
non-optimal 17 NO COMMENTS
unsupported-config 18 NO COMMENTS
fabric-conn-problem 51 NO COMMENTS
fabric-unsupported-conn 52 NO COMMENTS
config 81 NO COMMENTS
equipment-problem 82 NO COMMENTS
decomissioning 83 NO COMMENTS
chassis-limit-exceeded 84 NO COMMENTS
not-supported 100 NO COMMENTS
discovery 101 NO COMMENTS
discovery-failed 102 NO COMMENTS
identify 103 NO COMMENTS
post-failure 104 NO COMMENTS
upgrade-problem 105 NO COMMENTS
peer-comm-problem 106 NO COMMENTS
auto-upgrade 107 NO COMMENTS
link-activate-blocked 108 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

partNumber

Type: equipment:PartNumber
Primitive Type: string:Basic
Like: equipment:FruidInfo:partNumber
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

perf

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:perf
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

power

Type: equipment:PowerState
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:power
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
on 1 NO COMMENTS
test 2 NO COMMENTS
off 3 NO COMMENTS
online 4 NO COMMENTS
offline 5 NO COMMENTS
offduty 6 NO COMMENTS
degraded 7 NO COMMENTS
power-save 8 NO COMMENTS
error 9 NO COMMENTS
ok 10 NO COMMENTS
failed 11 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

presence

Type: equipment:Presence
Primitive Type: scalar:Enum8
Overrides:equipment:Stateful:presence
Paths: equipment:StatefulChCompIf:presence
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
empty 1 NO COMMENTS
equipped 10 NO COMMENTS
missing 11 NO COMMENTS
mismatch 12 NO COMMENTS
equipped-not-primary 13 NO COMMENTS
equipped-slave 14 NO COMMENTS
mismatch-slave 15 NO COMMENTS
missing-slave 16 NO COMMENTS
equipped-identity-unestablishable 20 NO COMMENTS
mismatch-identity-unestablishable 21 NO COMMENTS
equipped-with-malformed-fru 22 NO COMMENTS
inaccessible 30 NO COMMENTS
unauthorized 40 NO COMMENTS
not-supported 100 NO COMMENTS
equipped-unsupported 101 NO COMMENTS
equipped-deprecated 102 NO COMMENTS
equipped-disc-not-started 102 NO COMMENTS
equipped-disc-in-progress 103 NO COMMENTS
equipped-disc-error 104 NO COMMENTS
equipped-disc-unknown 105 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

reInsert

Type: scalar:Bool
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
When SIOC re-insert is detected (presence state changes from 'Missing' to 'Equipped'), reInsert will be set to 'true'. When user performs SIOC re-acknowledge, re-Insert will be set to 'false'.
Constants
yes true NO COMMENTS
defaultValue false NO COMMENTS

reachability

Type: adaptor:Reachability
Primitive Type: scalar:Bitmask8
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
A 1 NO COMMENTS
B 2 NO COMMENTS
unmanaged 128 NO COMMENTS
defaultValue 0 NO COMMENTS

revision

Type: equipment:Revision
Primitive Type: string:Basic
Like: equipment:Info:revision
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS
Constants
defaultValue "0" NO COMMENTS

rn

Type: reference:RN
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRn
Property Validators:

Comments:
The Relative Name (rn) uniquely identifies an object within a given context.
Note that a dn is comprised of a sequence of relative names. For example, the context "sys/chassis-1/blade-1/adaptor-1/host-eth-2" can be thought of as the following expression:
dn = <root object>/{rn}/{rn}/{rn}/{rn}/{rn}.
The rn can then be used to identify the object (for instance, "adaptor-1") within the context:
<... rn ="../" />

role

Type: equipment:SiocRole
Primitive Type: scalar:Enum8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
active 1 NO COMMENTS
standby 2 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

sacl

Type: mo:InstSaclType
Primitive Type: scalar:Bitmask8
Units: null
Encrypted: false
Access: implicit
Category: TopLevelSacl
Property Validators:

Comments:
The system acl property for each Managed Object. br/> This property is a 8 bit mask and supports the following values :-
a: del
b: mod
c: addchild
d: cascade

By default all Managed Objects have the following permissions
a: del
b: mod
c: addchild
This property is persisted in the db. If this property has a value none
it means, the user has read only permissions on this object.
Constants
none 0 NO COMMENTS
del 1 NO COMMENTS
mod 2 NO COMMENTS
addchild 4 NO COMMENTS
cascade 8 NO COMMENTS
DEFAULT 0 NO COMMENTS

serial

Type: equipment:Serial
Primitive Type: string:Basic
Like: equipment:Info:serial
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

status

Type: mo:ModificationStatus
Primitive Type: scalar:Bitmask32
Units: null
Encrypted: false
Access: implicit
Category: TopLevelStatus
Property Validators:

Comments:
This property controls the life cycle of a managed object
Constants
removed 16u In a setter method: specifies that an object should be removed.
In the return value of a setter method: indicates that an object has been removed.
created 2u In a setter method: specifies that an object should be created. An error is returned if the object already exists.
In the return value of a setter method: indicates that an object has been created.
modified 4u In a setter method: specifies that an object should be modified
In the return value of a setter method: indicates that an object has been modified.
deleted 8u In a setter method: specifies that an object should be deleted.
In the return value of a setter method: indicates that an object has been deleted.
DEFAULT 0 This type controls the life cycle of objects passed in the XML API.

When used in a setter method (such as configConfMo), the ModificationStatus specifies whether an object should be created, modified, deleted or removed.
In the return value of a setter method, the ModificationStatus indicates the actual operation that was performed. For example, the ModificationStatus is set to "created" if the object was created. The ModificationStatus is not set if the object was neither created, modified, deleted or removed.

When invoking a setter method, the ModificationStatus is optional:
If a setter method such as configConfMo is invoked and the ModificationStatus is not set, the system automatically determines if the object should be created or modified.

thermal

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:thermal
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS

usrLbl

Type: naming:UserLabel
Primitive Type: string:Basic
Units: null
Encrypted: false
Access: admin
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "32"
        Allowed Chars:
            Regex: [a-zA-Z0-9\[\]!#$%()*+,-./:;@ _{|}˜?&]+

Comments:
NO COMMENTS

vendor

Type: equipment:Vendor
Primitive Type: string:Basic
Like: equipment:Info:vendor
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

vid

Type: string:Basic
Like: equipment:FruidInfo:vid
Units: null
Encrypted: false
Access: implicit
Category: TopLevelRegular
Property Validators:
    Range:  min: "0"  max: "510"

Comments:
NO COMMENTS

voltage

Type: equipment:SensorThresholdStatus
Primitive Type: scalar:Enum8
Like: equipment:StatefulChCompIf:voltage
Units: null
Encrypted: false
Access: oper
Category: TopLevelRegular
Property Validators:

Comments:
NO COMMENTS
Constants
unknown 0 NO COMMENTS
ok 1 NO COMMENTS
upper-non-recoverable 2 NO COMMENTS
upper-critical 3 NO COMMENTS
upper-non-critical 4 NO COMMENTS
lower-non-critical 5 NO COMMENTS
lower-critical 6 NO COMMENTS
lower-non-recoverable 7 NO COMMENTS
not-supported 100 NO COMMENTS
DEFAULT unknown(0) NO COMMENTS
Overview  Containers  Contained  Inheritance  Events  Faults  FSMs  Properties Summary  Properties Detail  Naming