├
|
aaa:Ep AAA End points that a user can configure (Radius, Tacacs+, LDAP) |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
aaa:Realm AAA configuration to set which AAA service to use |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
aaa:Locale
This MO represents a Locale, which can be used to restrict access to specific orgs
in the org hierarchy.
A Locale can be assigned to local user, remote user, ldap groups to restrict access
to specific orgs.
Each locale can contain a set of aaa:Org objects, which represent the set of Orgs
that can be accessed when the Locale is assigned to a user.
|
|
|
├
|
aaa:Org Represents an org membership within a aaa:Locale object. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
aaa:PwdProfile This MO stores informaion about password constratints
applicable to all the local users. |
|
|
├
|
aaa:Session Represents an authenticated XML API or CLI session to UCS Manager.
UCS Manager automatically creates a aaa:Session object when a user
provides valid credentials through the XML API or CLI.
The aaa:Session object is automatically deleted when the user logs out, or
after a session timeout has occured.
|
|
|
├
|
aaa:UserLocale
This MO is used to assign a locale to local user, remote user, ldap groups.
This is used to restrict an user's access to certain orgs.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
aaa:UserRole
This MO is used to assign a role to local user, remote user, ldap groups.
This is used to manage access permission to an user.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
aaa:Role
This MO is used to manage a role which can be assigned to
local user, remote user, ldap groups to control access for an user.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
aaa:ShellLogin Represents a successful User Login session from a shell |
|
|
├
|
aaa:Session Represents an authenticated XML API or CLI session to UCS Manager.
UCS Manager automatically creates a aaa:Session object when a user
provides valid credentials through the XML API or CLI.
The aaa:Session object is automatically deleted when the user logs out, or
after a session timeout has occured.
|
|
|
├
|
aaa:UserData Do not taking backup of this MO, this user data become invalid
with time |
|
|
├
|
aaa:UserLocale
This MO is used to assign a locale to local user, remote user, ldap groups.
This is used to restrict an user's access to certain orgs.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
aaa:UserRole
This MO is used to assign a role to local user, remote user, ldap groups.
This is used to manage access permission to an user.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
aaa:WebLogin Represents a successful User Login session through HTTP or HTTPS |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
comm:SvcEp Service configuration for various services |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
comm:Dns Specifies the DNS domain name of this UCS system. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
comm:Ssh Ssh MO is not user modifiable, so no access is defined
However, it must be present in the model for iptables to
allow the port
|
|
|
├
|
comm:SyslogClient This object is used to control how syslog messages are sent to a remote destinations |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
compute:RackUnit
A physical compute RackUnit. Physical compute item representing
a Rack mountable unit.
|
Skipping contained mo's. Too many contained mo's: 56
├
|
domain:FeatureCont
Abstraction of domain features.
Serves as a top level container for category features like serverFeatures, nwFeatures
for a ucs domain.
|
|
├
|
domain:Feature
Abstraction of domain features.
Serves as a superclass of category features like serverFeature, nwFeature
for a ucs domain.
|
├
|
equipment:Chassis A physical unit that can accomodate multiple blade servers.
For example, the Cisco UCS 5108 Blade Server Chassis is six rack units
(6RU) high, can mount in an industry-standard 19-inch rack and uses
front-to-back cooling.
|
|
├
|
compute:Blade
A physical compute blade. Physical compute item in
blade form factor.
|
Skipping contained mo's. Too many contained mo's: 57
|
├
|
compute:BoardController
Managed object representing a blade PLD
such as CPLD, EPLD, and FPGAs for sanfrancisco blade.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
Skipping contained mo's. Too many contained mo's: 53
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:FanModule Represents an inventoried Fan module.
This object is created implicitly when a Fan module is detected during equipment discovery. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:IOCard Represents an inventoried IO Card on a device, such as an IO module on a UCS chassis or FEX.
This object is created implicitly when an IO Card is detected during hardware discovery. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that
needs the schedule, as opposed to being referred by name.
|
|
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
port:Group A collection of physical ports on a device.
A port group is created implicitly during device discovery of IO devices
such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis.
All the ports in a portGroup have the same type (i.e. FC, Ethernet).
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:IntFIo Abstraction of a physical port on an IO Card.
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:Psu Represents an inventoried Power Supply Unit.
This object is created implicitly when a Power Supply Unit is detected during equipment discovery. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
port:Group A collection of physical ports on a device.
A port group is created implicitly during device discovery of IO devices
such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis.
All the ports in a portGroup have the same type (i.e. FC, Ethernet).
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:IntFIo Abstraction of a physical port on an IO Card.
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:SwitchIOCard Represents an inventoried FI-IOM Card on a UCS-Mini Chassis
This object is created implicitly when an FI-IOM Card is detected during hardware
discovery.
TODO: This is model similar to IOCard currently however this does not behave like a
IOCard (IOM) and some of the properties will be removed if not needed.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
port:Group A collection of physical ports on a device.
A port group is created implicitly during device discovery of IO devices
such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis.
All the ports in a portGroup have the same type (i.e. FC, Ethernet).
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:IntFIo Abstraction of a physical port on an IO Card.
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
compute:BoardController
Managed object representing a blade PLD
such as CPLD, EPLD, and FPGAs for sanfrancisco blade.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
|
├
|
port:Group A collection of physical ports on a device.
A port group is created implicitly during device discovery of IO devices
such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis.
All the ports in a portGroup have the same type (i.e. FC, Ethernet).
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
port:IntFIo Abstraction of a physical port on an IO Card.
|
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
port:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that
needs the schedule, as opposed to being referred by name.
|
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
├
|
power:Budget Define chassis budget, extend it to include minimum consumption level The FSM properties to deploy chassis budget will also be contained here |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
storage:EnclosureDiskSlotEp Indicates the disk slot in an enclosure. When the slot is populated, peerDn
references the disk present. This is the same as the LocalDiskSlotEp mo.
This mo was created because of a conflict between LocalDiskSlotEp and
LocalDisk. Both have the same rn and therefore cannot be contained under
the same container. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
storage:LocalDiskLocalDisk identifies the physical storage device, a group of LocalDisks can be
partitioned into VirtualDrive (or LunDisk in the old code). All of them are child
MOs under Storage::Controller. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
storage:LocalDiskLocalDisk identifies the physical storage device, a group of LocalDisks can be
partitioned into VirtualDrive (or LunDisk in the old code). All of them are child
MOs under Storage::Controller. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
|
|
|
|
├
|
lstorage:Login
This is used to store the login information for KMIP server
|
|
|
├
|
storage:LocalDiskEp
Represents SAS/SATA connectivity to a physical disk.
This object is created to indicate a SCSI controller has physical connectivity to \
the specified {@link storage:LocalDisk}. In addition, when the disk is accessed \
through a SAS link, the SAS expander must be configured to expose the physical disk
to the SCSI controller.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
storage:NvmeStorageAdding a new MO for all NVMe related properties. Right now it has only one field but this will
increase going forward. Idea is to segregate NVMe specific properties from generic storage controller MO |
|
|
├
|
storage:OnboardDevice OnBoard Device This MO can represent any component that is part of a storage controller etc |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
storage:VirtualDrive Storage physical drives are grouped as Drive Group, a drive group then can be partitioned into
virtual drives. Each virtual drive appears as a physical device to the O/S. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
storage:LunDisk A logical unit number, or LUN, is a number used to identify a logical storage unit. A LUN may be used with
any device which supports read/write operations, but is most often used to refer to a logical disk as created
on a SAN. LunDisk refers to the logical disk, it's deprecated and replaced with VirtualDrive |
|
|
|
├
|
storage:ScsiLunRef ScsiLunRef is to keep track of the location of LUN item defined
storage profile (or profile def). This meta-data is guaranteed to be persisted in the storage target.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
storage:EnclosureDiskSlotEp Indicates the disk slot in an enclosure. When the slot is populated, peerDn
references the disk present. This is the same as the LocalDiskSlotEp mo.
This mo was created because of a conflict between LocalDiskSlotEp and
LocalDisk. Both have the same rn and therefore cannot be contained under
the same container. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
storage:LocalDiskLocalDisk identifies the physical storage device, a group of LocalDisks can be
partitioned into VirtualDrive (or LunDisk in the old code). All of them are child
MOs under Storage::Controller. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
├
|
storage:SasExpander Represents a SAS Expander that exposes the physical disks to the SCSI controller |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
storage:OnboardDevice OnBoard Device This MO can represent any component that is part of a storage controller etc |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
storage:VirtualDrive Storage physical drives are grouped as Drive Group, a drive group then can be partitioned into
virtual drives. Each virtual drive appears as a physical device to the O/S. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
storage:LunDisk A logical unit number, or LUN, is a number used to identify a logical storage unit. A LUN may be used with
any device which supports read/write operations, but is most often used to refer to a logical disk as created
on a SAN. LunDisk refers to the logical disk, it's deprecated and replaced with VirtualDrive |
|
|
|
├
|
storage:ScsiLunRef ScsiLunRef is to keep track of the location of LUN item defined
storage profile (or profile def). This meta-data is guaranteed to be persisted in the storage target.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:IOCard Represents an inventoried IO Card on a device, such as an IO module on a UCS chassis or FEX.
This object is created implicitly when an IO Card is detected during hardware discovery. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that
needs the schedule, as opposed to being referred by name.
|
|
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
port:Group A collection of physical ports on a device.
A port group is created implicitly during device discovery of IO devices
such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis.
All the ports in a portGroup have the same type (i.e. FC, Ethernet).
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:IntFIo Abstraction of a physical port on an IO Card.
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:Psu Represents an inventoried Power Supply Unit.
This object is created implicitly when a Power Supply Unit is detected during equipment discovery. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that
needs the schedule, as opposed to being referred by name.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
├
|
power:Budget Define chassis budget, extend it to include minimum consumption level The FSM properties to deploy chassis budget will also be contained here |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
extvmm:Ep SINGLTON THAT CONTAINS ALL THE EXTERNAL VMs |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
extvmm:UpLinkPP
UplinkPP objects contains references to FNDs.
This object is used to link the DVS to the different
network sites.
|
|
|
|
|
├
|
extvmm:FNDReference
FNDReference objects are used by uplink port-profiles to determine
which fabric network definitions or network sites are avaliable to
the DVS. This object maintains a reference to an FND object
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
extvmm:SwitchDelTask This MO is used to track the deletion task of a given extvmm:Provider MO.
When a user deletes a vm:Switch (or any of its parent MOs), the system implicitly creates a extvmm:SwitchDelTask instance.
After deletion of the vm:Switch, the user may realize the IP address of vCenter has changed. The user
can use the properties of this MO to complete the deletion of the vm:Switch.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
extvmm:UpLinkPP
UplinkPP objects contains references to FNDs.
This object is used to link the DVS to the different
network sites.
|
|
|
|
|
├
|
extvmm:FNDReference
FNDReference objects are used by uplink port-profiles to determine
which fabric network definitions or network sites are avaliable to
the DVS. This object maintains a reference to an FND object
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
feature:ContextEp This object contains ProviderInstance which are instantiated in the system. |
|
├
|
feature:DefinitionInstance This object represents a feature definition instance which is created under ProviderInstance parent
This is used to determine if a particular feature is supported or not in the system when queried.
|
|
├
|
feature:FruCapProviderInstance
This object represents a FruCapProvider instance which is created under ProviderInstance parent
This is used to determine if a particular harware element is supported or not in the system when queried.
|
├
|
firmware:Catalogue
Represents a library of firmware images like downloaded images,
installables etc
|
|
├
|
firmware:Distributable
Represents a distributable (downloadable) bundle.
UCS includes the infrastructure bundle, the "blade" bundle and the "rack-server" bundle.
A bundle contains {@link firmware:DistImage} images.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:DistImage
Represents a component image of distributable package. Has
one-to-one correspondence with installable object.
Useful to display contents of a bundle image and their
current status (Whether installable is deleted).
|
|
├
|
firmware:Downloader
Represents a download operation. Could be active or executed
in the past. Used to display the status of various download
operations in progress.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:Image
Represents a physical image file in bootflash.
Created implicitely as part of download operation.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
firmware:System
Represents system firmware. i.e, the firmware package
for the whole system
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:Ack
Ack object used by Install-All to get user's acknowledgement before
rebooting primary FI
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that
needs the schedule, as opposed to being referred by name.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that
needs the schedule, as opposed to being referred by name.
|
|
├
|
initiator:UnitEp this is the object that is created when UCSM requests a LUN for a vnic |
├
|
license:Ep The system-level endpoint for licensing contains Mos
representing the system-wide properties of licensable features.
It is a singleton. |
|
├
|
license:Downloader
Represents a download operation. Could be active or executed
in the past. Used to display the status of various download
operations in progress.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
license:Prop The user may "tag" a license with a set of
"name=value" pairs. They are stored here
(e.g., "A=X;B=Y;C=Z"). |
|
├
|
license:Feature A system-wide representation of a licensable feature
exists to specify system-wide properties of that feature.
It is identified by the {name, vendor, version} triplet. |
|
|
├
|
license:Instance Instance MOs correspond to actual FLEXlm (or other)
licenses supplied by the user in a license file.
Licenses are uniquely identified by the
{fileId, lineId} pair. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
license:Prop The user may "tag" a license with a set of
"name=value" pairs. They are stored here
(e.g., "A=X;B=Y;C=Z"). |
|
├
|
license:File License file Mos correspond to actual FLEXlm (or other)
license files supplied by the user. While the file body
is not stored directly as a property of the Mo, all of
the essential attributes are represented either as properties
of the license file Mo or the subordinate license Mos.
The actual file contents are stored in the file system
under /o... |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
license:Contents This Mo represents the contents from the downloaded file.
If the file is found to be valid, an instance of File Mo
would be created and the file contents would be stored
under Content MOs. So, a File MO can have multiple
Content MOs based on the no of different features it has.
|
|
|
|
├
|
license:FeatureLine This MO represents Line Id, type of the feature,
PAK, SIGN, Feature line Quantity (no of licenses
contributed by this line) and expiration date values
for each feature line, from this license file |
|
├
|
license:ServerHostId A system-wide representation of a licensable feature
exists to specify system-wide properties of that feature.
It is identified by the {name, vendor, version} triplet. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
trig:LocalSched A locally defined user-defined schedule. The schedule is contained locally by the Managed Object that
needs the schedule, as opposed to being referred by name.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
network:Element Represents a physical network element, such as a Fabric Interconnect. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:FanModule Represents an inventoried Fan module.
This object is created implicitly when a Fan module is detected during equipment discovery. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
equipment:Psu Represents an inventoried Power Supply Unit.
This object is created implicitly when a Power Supply Unit is detected during equipment discovery. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
├
|
equipment:SwitchCard Represents a physical switch card, such as a fixed module on a Fabric Interconnect
or an extension module.
This object is automatically created through hardware discovery. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
port:Group A collection of physical ports on a device.
A port group is created implicitly during device discovery of IO devices
such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis.
All the ports in a portGroup have the same type (i.e. FC, Ethernet).
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:IntFIo Abstraction of a physical port on an IO Card.
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
port:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
network:Limit Represents a logical object under the network element which is used to track the various
counts that are there in the switch |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
network:OperLevel Represents a logical object under the network element which is used to track how many
primary vlans are there in the switch and is it within the limits specified by the
capability catalogue.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
nfs:MountInst MountInst represents the mount point based on MountDef.
mount/umount FSMs are defined on this object.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
power:Budget Define chassis budget, extend it to include minimum consumption level The FSM properties to deploy chassis budget will also be contained here |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
├
|
sw:EthLanBorder
Represents Switch Ethernet LAN Border Domain
which is a collection of Ethernet physical
ports and port channels and their configurations.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthLanPc
Represents a Ethernet LAN Border Port Channel.
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:VlanGroup A Group containing zero or more sw:Vlan instances.
This object is used to model VLAN compression groups. |
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthLanPc
Represents a Ethernet LAN Border Port Channel.
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:ExtUtility Represents config on network element, such as a Fabric Interconnect.
This object is a child of network:Element and is used to model the
port breakout on a particular Fabric Interconnect. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:FcSanBorder
Represents Switch FC LAN Border Domain
which is a collection of FC physical
ports and their configurations.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:FcSanEp
Represents a FC SAN Border Physical Port.
|
|
|
├
|
sw:FcSanPc
Represents a FC SAN Border Port Channel.
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
├
|
sw:FcMonDestEp switch:FcMonDestEp is the MO that is used to send the configuration of an FC SPAN destination port to portAG |
|
|
|
├
|
sw:FcSanPc
Represents a FC SAN Border Port Channel.
|
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
├
|
sw:Phys Represents a physical network element, such as a Fabric Interconnect.
This object is a child of network:Element and is used to model the desired
configuration state of Ethernet and FC ports on a particular Fabric Interconnect. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
├
|
sw:PortDiscover This object is a child of network:Element and is used to enable an
unconfigured port which has a transceiver. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
pki:Ep PKI config: keyrings and CA certs |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
mgmt:KmipCertPolicy
This policy is used to provide configuration to creates certificates on the BMC
for use by KMIP client library.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
pki:TP CA object, also called Trust Points in DCOS |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
policy:Control Abstract class to specify control information for a policy |
|
|
├
|
policy:Controlledmo name="Qos"
super="Control"
concrete="yes"
access="admin,ext-lan-qos,ext-san-qos,ls-network,ls-network-policy,ls-qos-policy"
backup="yes"
generate="behavior"
label="QOS Class Policy Configuration Settings"
>
|
|
├
|
policy:DestEp
Define the metadata that defines behavior on how to apply the object from UCS Central to UCSM.
Now, it is assumed that the object in Central is always a policy definition. However, the object in
UCSM is NOT necessary an policy object
policy-mgr needs to transform the central policy object to UCSM non-policy object if needed. When UCSM
tries to apply the ob... |
|
|
|
├
|
policy:Scope PolicyScope class is to keep track of policy class id and policy name
in resolve-policy request, where the combination of context, policy class id and
policy name is unique.
policy:Digest:
name: PolicyScope->policyName
type: policyScope->policyType
context: ... |
|
|
|
|
├
|
policy:PolicyDestClass
PolicyDestClass specifies the behavior of policy replication destionation mo behavior (deleted or keep it) when
there is no requestor anymore.
If there is no PolicyDestClass, and if the policy is org policy, the policy is going to be deleted in UCSM
if the policy is domain group policy, and the replicated policy in UCSM is not deleted
|
|
|
|
|
├
|
policy:Requestor PolicyRequestor class to keep track of policyName, onBehalfOfType, and
onBehalfOfIdent for a resolve-policy request, where the policyName is unique. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
top:InfoPolicy Represents a policy for showing the info from the network element, such as a Fabric Interconnect. |
├
|
trig:BaseSched
Generic Scheduler.
A user-defined schedule that can be used to trigger configuration at a specified date and time in the future.
The schedule is defined in the system and can be referred by name from policies that require a schedule.
For example, maintenance policies and firmware auto-install policies can refer to user-defined schedules.
The schedule can have a list... |
├
|
trig:Meta
A system-generated Meta Scheduler.
This object is automatically created by the system for every trig:BaseSched instance,
and is added under top:System.
The object is used to track the execution of the trig:BaseSched schedule. It keeps track
of the last time the schedule was triggered and every job triggered by the schedule.
|
|
├
|
trig:Triggered This object is used to track the execution of an individual job triggered by a schedule. |
|