|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
equipment:FanModule Represents an inventoried Fan module.
This object is created implicitly when a Fan module is detected during equipment discovery. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
equipment:Psu Represents an inventoried Power Supply Unit.
This object is created implicitly when a Power Supply Unit is detected during equipment discovery. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
├
|
equipment:SwitchCard Represents a physical switch card, such as a fixed module on a Fabric Interconnect
or an extension module.
This object is automatically created through hardware discovery. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
port:Group A collection of physical ports on a device.
A port group is created implicitly during device discovery of IO devices
such as IO cards on a Fabric Interconnect, or IO modules on a UCS chassis.
All the ports in a portGroup have the same type (i.e. FC, Ethernet).
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
port:IntFIo Abstraction of a physical port on an IO Card.
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
port:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
├
|
port:PIo An abstraction of a Physical Port on a Fabric Interconnect switch device.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
firmware:Status
A registered client for monitoring firmware update progress
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
adaptor:ExtEthIfPc
Network facing Ethernet port channel interface on a server adaptor.
For example, on a network adaptor installed on a UCS blade, this MO represents
the Ethernet port channel interface connected to the IO Module on the UCS chassis.
In this case, the peer of this MO is a Server facing Ethernet interface on the IOM.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
firmware:BootDefinition
Container for BootUnit objects. This is needed since some
components (like switch) have more then one BootUnit objects.
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
|
├
|
firmware:ServicePack
Representation of firmware image version that is loaded at reboot.
Applicable to all the components that supports one or more
backup image(s).
|
|
├
|
firmware:Updatable
Representation of backup firmware image for the
chassis components that supports backup image (CMC/BMC/BIOS/Adaptor etc)
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
firmware:Installable
Represents a logical image that can be installed on an end-point.
Ech physical File can have one or more installables. This is to
Support Model changes without any software change.
Created implicitely as part of download operation.
|
|
├
|
mgmt:ASecureBoot MO used to hold the admin and operational state of the
secure boot status of the BMC/CMC.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
mgmt:If Encapsulates the configuration of a CIMC management interface. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sysdebug:MEpLog
This object represents the status of a remote managed end-point log.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
vnic:IpV4PooledAddr
Represents the IPv4 address of an IP interface, where the IP address is obtained from a pool of IP addresses.
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
vnic:IpV4History A temporary object used to hold the history of ipv4 address of MOs.
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
mgmt:HealthStatus This MO represents an aggregation of all the individual health attributes mos |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
network:Limit Represents a logical object under the network element which is used to track the various
counts that are there in the switch |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
network:OperLevel Represents a logical object under the network element which is used to track how many
primary vlans are there in the switch and is it within the limits specified by the
capability catalogue.
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
nfs:MountInst MountInst represents the mount point based on MountDef.
mount/umount FSMs are defined on this object.
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
power:Budget Define chassis budget, extend it to include minimum consumption level The FSM properties to deploy chassis budget will also be contained here |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
├
|
sw:EthLanBorder
Represents Switch Ethernet LAN Border Domain
which is a collection of Ethernet physical
ports and port channels and their configurations.
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:EthLanPc
Represents a Ethernet LAN Border Port Channel.
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:VlanGroup A Group containing zero or more sw:Vlan instances.
This object is used to model VLAN compression groups. |
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthLanPc
Represents a Ethernet LAN Border Port Channel.
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
sw:ExtUtility Represents config on network element, such as a Fabric Interconnect.
This object is a child of network:Element and is used to model the
port breakout on a particular Fabric Interconnect. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
├
|
sw:FcSanBorder
Represents Switch FC LAN Border Domain
which is a collection of FC physical
ports and their configurations.
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:FcSanEp
Represents a FC SAN Border Physical Port.
|
|
├
|
sw:FcSanPc
Represents a FC SAN Border Port Channel.
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
dcx:Vc Virtual Circuit on a server adaptor, chassis IOM, or FEX.
This MO is created implicitly to represent a circuit between two end-points |
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
├
|
sw:FcMonDestEp switch:FcMonDestEp is the MO that is used to send the configuration of an FC SPAN destination port to portAG |
|
|
├
|
sw:FcSanPc
Represents a FC SAN Border Port Channel.
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
├
|
sw:Phys Represents a physical network element, such as a Fabric Interconnect.
This object is a child of network:Element and is used to model the desired
configuration state of Ethernet and FC ports on a particular Fabric Interconnect. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
|
├
|
sw:SubGroup
A SubGroup contains ports which are made availabe by connecting a break-out cable to an
aggregated port. Example in UCS-Mini a 40GB Scalability
port is connected to a 4x10GB breakout cable to get 4 10GB ports.
|
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthLanEp
Represents a Ethernet LAN Border Physical Port.
|
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:EthMonDestEp switch:EthMonDestEp is the MO that is used to send the configuration of an ethernet SPAN destination port to portAG |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
|
├
|
dcx:FcoeVifEp Vif for FCOE uplink/storage. From elcap-mr1 onwards dcxFcoeVifEp will be used under Fcoe interfaces instead of dcxVifEp. dcxVifEpMo will be used under UniverseMo to hold free vif ids as earlier. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
|
|
├
|
sw:FcUserZoneGroupA swFcUserZoneGroup is created for every user defined Zone Profile which has a zone under a given zoneset. |
|
|
|
|
├
|
fabric:NetflowIPv4Addr Represents the source ip-address of the SVI on a given fabric. this is in turn used
by the exporter vNICs on sereno. Separate vNICs are used per fabric interconnect
for exporting flow records to the external collector using the same user specified
VLAN. A different source ip is used for each of these vNIC. |
|
|
|
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
|
├
|
sw:PhysEtherEp Represents the desired configuration state of an Ethernet port
on a Fabric Interconnect. |
|
|
├
|
sw:PhysFcEp Represents the desired configuration state of a FC port
on a Fabric Interconnect. |
├
|
sw:PortDiscover This object is a child of network:Element and is used to enable an
unconfigured port which has a transceiver. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|
├
|
fault:Inst An abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure,
as defined in ISO/CD 10303-226. |
|