Class l2:BD (CONCRETE)

Class ID:3377
Class Label: Bridge Domain
Encrypted: false - Exportable: false - Persistent: true - Configurable: false - Subject to Quota: Disabled - Abstraction Layer: Concrete Model - APIC NX Processing: Disabled
Write Access: [NON CONFIGURABLE]
Read Access: [access-connectivity, admin, fabric-connectivity, fabric-protocol, tenant-connectivity, tenant-ext-connectivity]
Creatable/Deletable: no (see Container Mos for details)
Semantic Scope: EPG
Semantic Scope Evaluation Rule: Explicit
Monitoring Policy Source: Explicit
Monitoring Flags : [ IsObservable: true, HasStats: false, HasFaults: true, HasHealth: true, HasEventRules: false ]

RN FORMAT: bd-{[fabEncap]}

    [1] PREFIX=bd- PROPERTY = fabEncap




DN FORMAT: 

[0] topology/pod-{id}/node-{id}/sys/ctxsubstitute-{[encap]}/bd-{[fabEncap]}

[1] sys/ctxsubstitute-{[encap]}/bd-{[fabEncap]}

[2] topology/pod-{id}/node-{id}/sys/inst-{name}/bd-{[fabEncap]}

[3] sys/inst-{name}/bd-{[fabEncap]}

[4] topology/pod-{id}/node-{id}/sys/ctx-{[encap]}/bd-{[fabEncap]}

[5] sys/ctx-{[encap]}/bd-{[fabEncap]}

                

Diagram

Super Mo: l2:Dom, Container Mos: l3:Dom (deletable:no), Contained Mos: epm:Db, epm:DynEpgPolicyTrig, fmcast:Grp, l2:AnchorBD, l2:CfgMacEp, l2:EpCtrl, l2:EpRetPol, l2:EpScanInfo, l2:MacCktEp, l2:MpBd, l3:IpCktEp, l3:StaticRouteIpEp, qinq:CktEp, svi:If, vlan:CktEp, vsan:CktEp, vxlan:CktEp, Relations From: fv:AIfConn, fv:EPgDef, Relations To: fv:IfConn, nw:PathEp, Relations: l2:RsExtBD, l2:RsPathDomAtt, l2:RtDomIfConn, l2:RtEPgDefToL2Dom,

Containers Hierarchies

top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...          ├ l3:CtxSubstitute  Tenant context object substitute. Its needed for internal PE purposes but it doesnt instantiate any VRF in the node.            ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...    ├ l3:CtxSubstitute  Tenant context object substitute. Its needed for internal PE purposes but it doesnt instantiate any VRF in the node.      ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...          ├ l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.            ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...    ├ l3:Inst The infra VRF is created for the iNXOS fabric infrastructure. All communications between fabric elements, such as spine, leaf and vleaf, take place in this VRF.      ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ fabric:Topology The root for IFC topology.    ├ fabric:Pod A pod.      ├ fabric:Node The root node for the APIC.        ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...          ├ l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.            ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network. top:Root  This class represents the root element in the object hierarchy. All managed objects in the system are descendants of the Root element.  ├ top:System The APIC uses a policy model to combine data into a health score. Health scores can be aggregated for a variety of areas such as for the infrastructure, applications, or services. The category health score is calculated using a Lp -Norm formula. The health score penalty equals 100 minus the health score. The health score penalty represents the overall health score penalties of a set of MOs that belong to a given category and are children or direc...    ├ l3:Ctx The tenant context information is equivalent to a virtual routing and forwarding (VRF) instance created for the tenant's L3 network. Similar to a VRF in traditional Cisco routers, the tenant context isolates the IP addresses of the tenant, allowing different tenants to have overlapping IP addresses.      ├ l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.

Contained Hierarchy

l2:BD The Layer 2 Bridge-domain identifies the boundary of a tenant?s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.  ├ epm:Db     ├ epm:AnycastIpEp  IP Anycast record      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ epm:DTEp  Tunnel endpoints discovered through epm    ├ epm:IpEp       ├ epm:RtMacEpToIpEpAtt     ├ epm:MacEp       ├ epm:RsMacEpToIpEpAtt       ├ tag:Annotation     ├ epm:MacEpFault  Mac Ep Fault record    ├ epm:RogueIpEp  IP Rogue record      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ epm:RogueMacEp       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ epm:SviIpEp  SVI IP record      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)  ├ epm:DynEpgPolicyTrig   ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.  ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ tag:Annotation     ├ tag:Tag   ├ fmcast:Grp A multicast group entity.  ├ health:Inst A base class for a health score instance.(Switch only)  ├ l2:AnchorBD   ├ l2:CfgMacEp  Config Mac end point (Anycast MAC)    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:L2AnycastEP       ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)  ├ l2:EpCtrl   ├ l2:EpRetPol An endpoint retention policy identifying the duration of how long information is kept about the remote endpoint. This is expressed through a set of triggering and ageing control parameters.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ l2:EpScanInfo   ├ l2:MacCktEp  Mac EP policy    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:MacCktCons       ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l2:RsMacBaseEppAtt     ├ l2:RsMacEppAtt     ├ tag:Annotation     ├ tag:Tag   ├ l2:MpBd  Layer2 Bridge-domain more properties used in multipod case Not added to BD mo because in single pod case these new added properties are not used.  ├ l2:RsExtBD A source relation to the interface connectivity. This is an internal object.  ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ l2:LPort The holder of nxosmock-specific information of the port.    ├ l2:PortSecurityPolDef  Port Security Policy      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)  ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.  ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.  ├ l3:IpCktEp  IP Circuit Endpoint    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3:RsIpEppAtt     ├ l3:RtIpCktEpIfConn  IP correspojding to this IfConn    ├ tag:Annotation     ├ tag:Tag   ├ l3:StaticRouteIpEp  Static Route IP end point    ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility    ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.    ├ tag:Annotation     ├ tag:Tag   ├ qinq:CktEp  802.1q Vlan    ├ epm:Db       ├ epm:AnycastIpEp  IP Anycast record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DTEp  Tunnel endpoints discovered through epm      ├ epm:IpEp         ├ epm:RtMacEpToIpEpAtt       ├ epm:MacEp         ├ epm:RsMacEpToIpEpAtt         ├ tag:Annotation       ├ epm:MacEpFault  Mac Ep Fault record      ├ epm:RogueIpEp  IP Rogue record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:RogueMacEp         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:SviIpEp  SVI IP record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ epm:DynEpgPolicyTrig     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:EpScanInfo     ├ l2:MacEp A static Mac endpoint.      ├ l2:RtEpDefRefToL2MacEp     ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:LPort The holder of nxosmock-specific information of the port.      ├ l2:PortSecurityPolDef  Port Security Policy        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.    ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.    ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.    ├ qinq:RsQinqEppAtt   ├ svi:If A routed VLAN interface.    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3:RsL3If The source of the sub-interface/l3-interface.    ├ l3:RsL3dot1pRuleAtt  Relation to the set of Dot1P rules      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3:RsL3dscpRuleAtt  Relation to the set of DSCP rules      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l3:RtPseudoIf A target relation to the abstract layer 3 interface. If the mode is pseudo interface, the list of all interfaces the DHCP requests is flooded.    ├ l3:RtSpanSrcToL3OutAtt  Relation to the L3 out    ├ l3:RtSrcToL3OutAtt  Relation to the L3 out    ├ nw:RtPathToIf A target relation to the interface information.    ├ rmon:Dot1d The Dot1d statistics.    ├ rmon:Dot3Stats The Dot3 statistics.    ├ rmon:EgrCounters  Interface egress Drop counters    ├ rmon:EtherStats The Ethernet statistics.    ├ rmon:IfBvCloudsecrx  Interface Bv Cloudsec Rx counters    ├ rmon:IfBvCloudsectx  Interface Bv Cloudsec Tx counters    ├ rmon:IfBvMacsecrx  Interface Bv Macsec Rx counters    ├ rmon:IfBvMacsectx  Interface Bv Macsec Tx counters    ├ rmon:IfFcmac  fcmac interface In Out statistics counters    ├ rmon:IfHCIn The interface high capacity input statistics.    ├ rmon:IfHCOut The interface high capacity output statistics.    ├ rmon:IfIn The interface input statistics.    ├ rmon:IfMacsecrx  Interface Macsec Rx counters    ├ rmon:IfMacsectx  Interface Macsec Tx counters    ├ rmon:IfOut The interface output statistics.    ├ rmon:IfStorm     ├ rmon:IngrCounters  Ingress counters    ├ rmon:IpIn The IPV4 input statistics.    ├ rmon:Ipv6IfStats The IPV6 interface statistics.  ├ vlan:CktEp A VLAN object created for an endpoint group with an 802.1q encap.    ├ epm:Db       ├ epm:AnycastIpEp  IP Anycast record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DTEp  Tunnel endpoints discovered through epm      ├ epm:IpEp         ├ epm:RtMacEpToIpEpAtt       ├ epm:MacEp         ├ epm:RsMacEpToIpEpAtt         ├ tag:Annotation       ├ epm:MacEpFault  Mac Ep Fault record      ├ epm:RogueIpEp  IP Rogue record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:RogueMacEp         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:SviIpEp  SVI IP record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ epm:DynEpgPolicyTrig     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:EpScanInfo     ├ l2:MacEp A static Mac endpoint.      ├ l2:RtEpDefRefToL2MacEp     ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:LPort The holder of nxosmock-specific information of the port.      ├ l2:PortSecurityPolDef  Port Security Policy        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.    ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.    ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.    ├ vlan:RsVlanEppAtt A source relation to an abstract representation of the resolvable endpoint profile.    ├ vlan:RtSrcEncap A target relation to the VLAN object created for an endpoint group with an 802.1q encap.    ├ vlan:RtToVlanCkt  Relationship to the vlan::CktEp Used for DVS USEG feature for ref counting number of Ckts using this rule Single vlanCktEp will be shared by multiple base EPGs in a given BD  ├ vsan:CktEp  Vsan represents a generic CktEp    ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.    ├ vsan:RsVsanLabelAtt  Associations to nw:LabelEp with rel-mo to vfcif "    ├ vsan:RsVsanPathAtt  Associations to nw:PathEp with rel-mo to vfcif      ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.  ├ vxlan:CktEp A VXLAN circuit.    ├ epm:Db       ├ epm:AnycastIpEp  IP Anycast record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:DTEp  Tunnel endpoints discovered through epm      ├ epm:IpEp         ├ epm:RtMacEpToIpEpAtt       ├ epm:MacEp         ├ epm:RsMacEpToIpEpAtt         ├ tag:Annotation       ├ epm:MacEpFault  Mac Ep Fault record      ├ epm:RogueIpEp  IP Rogue record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:RogueMacEp         ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ epm:SviIpEp  SVI IP record        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ health:Inst A base class for a health score instance.(Switch only)    ├ epm:DynEpgPolicyTrig     ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.    ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.      ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility      ├ tag:Annotation       ├ tag:Tag     ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:EpScanInfo     ├ l2:RsDot1pRuleAtt A source relation to the set of Dot1P rules. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsDscpRuleAtt A source relation to a set of DSCP rules. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RsPathDomAtt A source relation to the ports on this domain is allowed. This is an internal object.      ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.      ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.        ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility        ├ tag:Annotation         ├ tag:Tag       ├ health:Inst A base class for a health score instance.(Switch only)      ├ l2:Cons Used for reference counting the consumers corresponding to the RsPathDomAtt relation. Requirement from switch team: If an circuit is associated to port-x, then the BD should also get associated with the same port. This managed object is used for reference counting the circuit endpoints that need the BD-to-port association.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.      ├ l2:LPort The holder of nxosmock-specific information of the port.      ├ l2:PortSecurityPolDef  Port Security Policy        ├ fault:Counts An immutable object that provides the number of critical, major, minor, and warning faults raised on its parent object and its subtree.        ├ fault:Delegate Exposes internal faults to the user. A fault delegate object can be defined on IFC (for example, for an endpoint group) and when the fault is raised (for example, under an endpoint policy on a switch), a fault delegate object is created on IFC under the specified object. A fault delegate object follows the lifecycle of the original fault instance object, being created, modified, or deleted based on the changes of the original fault.        ├ fault:Inst Contains detailed information of a fault. This object is attached as a child of the object on which the fault condition occurred. One instance object is created for each fault condition of the parent object. A fault instance object is identified by a fault code.          ├ aaa:RbacAnnotation  RbacAnnotation is used for capturing rbac properties of any apic object Objects can append rbacannotations as Object->RbacAnnotation which is then checked for domain eligibility          ├ tag:Annotation           ├ tag:Tag         ├ health:Inst A base class for a health score instance.(Switch only)    ├ l2:RtDomIfConn A target relation to the layer 2 flood domain.    ├ l2:RtEPgDefToL2Dom A target relation to the layer 2 flood domain.    ├ l2:RtSpanSrcToL2CktEpAtt A target relation to the set of circuits. This is an internal object.    ├ vxlan:RsVxlanEppAtt A source relation to an abstract representation of a resolvable endpoint profile.