ipv6:If

IPV6 Interface

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
autoconfig nw:AdminSt
(scalar:Enum8)
IPv6 Stateless address autoconfig SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
defaultRoute nw:AdminSt
(scalar:Enum8)
Default Route Addition with Nexthop as RA Source Address SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
forward nw:AdminSt
(scalar:Enum8)
IPv6 forward SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
llAddr address:Ip
IPv6 Link Local Address Value must match ipv4 or ipv6 known format
llAddrUseBia nw:AdminSt
(scalar:Enum8)
IPv6 Link Local Use BIA SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
urpf ip:UrpfT
(scalar:Enum8)
IPv6 URPF Info SELECTION:
0 - disabled
1 - strict
2 - loose
3 - loose-allow-default
4 - strict-allow-vni-hosts
DEFAULT: disabled
useLinkLocalAddr nw:AdminSt
(scalar:Enum8)
IPv6 Address Use Link Local Address SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
configError ipv6:ConfigErr
(scalar:Enum8)
Config error SELECTION:
0 - noerror
1 - nghbrAddress
2 - useLinkLocalOnly
3 - forward
DEFAULT: noerror
operSt ip:OperSt
(scalar:Enum8)
Operational State SELECTION:
0 - unspecified
1 - down
2 - up
3 - failed
DEFAULT: up
operStQual ip:UnnumberedOperStQual
(scalar:Enum8)
Operational State Qualifier SELECTION:
0 - unspecified
1 - parent-unnumbered
2 - child-numbered
3 - invalid-source
4 - invalid-interface
5 - intf-self-referential
DEFAULT: unspecified

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
id nw:IfId
(base:IfIndex)
An identifier . Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)
The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced