stp:If
A container for the MCP information that is operated at a interface level.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| adminSt | nw:IfAdminSt (nw:AdminSt) |
The administrative state of the object or policy. | SELECTION: 1 - enabled 2 - disabled |
| bpdufilter | stp:Bpdufilter (scalar:Enum8) |
bpdufilter mode | SELECTION: 0 - default 1 - enable 2 - disable DEFAULT: default |
| bpduguard | stp:BPDUGuard (scalar:Enum8) |
Guard Mode | SELECTION: 0 - default 1 - enable 2 - disable DEFAULT: default |
| cost | stp:Cost (scalar:Uint32) |
Port Path Cost | RANGE: [0 , 200000000] DEFAULT: 0 |
| ctrl | stp:IfControl (scalar:Bitmask8) |
Interface controls | SELECTION: 0 - unspecified 1 - bpdu-guard 2 - bpdu-filter DEFAULT: unspecified |
| descr | naming:Descr1024 (string:Basic) |
Description | MAX SIZE: 1024 |
| guard | stp:Guard (scalar:Enum8) |
Guard Mode | SELECTION: 0 - default 1 - root 2 - loop 3 - none DEFAULT: default |
| lcIssu | stp:LcIssu (scalar:Enum8) |
Port lc issu | SELECTION: 0 - default 1 - disruptive 2 - non-disruptive 3 - auto DEFAULT: default |
| linkType | stp:LinkType (scalar:Enum8) |
Link Type | SELECTION: 1 - auto 2 - p2p 3 - shared DEFAULT: auto |
| mode | stp:IfMode (scalar:Enum8) |
Port mode | SELECTION: 0 - default 1 - edge 2 - network 3 - normal 4 - trunk DEFAULT: default |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 128 |
| prestdCfg | stp:AdminSt (scalar:Enum8) |
Port mst prestd | SELECTION: 1 - enabled 2 - disabled DEFAULT: disabled |
| priority | stp:PortPriority (scalar:UByte) |
Port Priority | RANGE: [0 , 224] DEFAULT: 128 |
| simulatePvst | stp:SimulateIf (scalar:Enum8) |
Port simulate pvst | SELECTION: 0 - default 1 - enabled 2 - disabled DEFAULT: default |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| id | nw:IfId (base:IfIndex) |
An identifier . | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |