bgp:PeerIfEntry

BGP Peer Interface Entry: BGP peer operational status information.

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
id nw:IfId
(base:IfIndex)
Interface id of the neighbor Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
advCap bgp:CapT
(scalar:Bitmask64)
Advertised Capability SELECTION:
1 - dynamic
2 - dynamic-mp
4 - dynamic-gr
8 - dynamic-refresh
16 - dynamic-old
32 - refresh
64 - refresh-old
128 - as4
256 - gr
512 - ipv4-ucast
1024 - vpnv4-ucast
2048 - cap
4096 - ipv6-ucast
8192 - vpnv6-ucast
16384 - ipv4-mvpn
32768 - ipv6-mvpn
65536 - ipv4-mcast
131072 - ipv6-mcast
262144 - ipv4-lucast
524288 - ipv6-lucast
1048576 - lnkstate
2097152 - l2vpn-evpn
4194304 - ipv4-mdt
connAttempts bgp:ConnAttempts
(scalar:Uint32)
Connection Attempts SELECTION:
0 - na
DEFAULT: na
connDrop cap:Quant
(scalar:Uint16)
Connections Dropped
RANGE: [0 , 0xFFFF]
DEFAULT: 0
connEst cap:Quant
(scalar:Uint16)
Connections Established
RANGE: [0 , 0xFFFF]
DEFAULT: 0
connIf nw:IfId
(base:IfIndex)
Directly Attached Interface Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
fd bgp:SockFD
(scalar:Uint32)
FD to Connect to Peer RANGE: [0, 4294967295]
flags bgp:PeerFlags
(scalar:Bitmask16)
Flags SELECTION:
1 - direct-connect
2 - cap-neg
4 - gr-enabled
8 - no-mem
16 - cfg-peer
holdIntvl bgp:HoldIntvl
(scalar:Uint16)
Hold Interval in secs
RANGE: [3 , 3600]
DEFAULT: 180
kaIntvl bgp:KaIntvl
(scalar:Uint16)
Keepalive Interval in secs
RANGE: [0 , 3600]
DEFAULT: 60
lastFlapTs scalar:Date
Last Flap Timestamp DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z
localIp address:Ip
Local IP Value must match ipv4 or ipv6 known format
localPort l4:Port
(scalar:Uint16)
Local port number of the local host
RANGE: [0 , 0xffff]
DEFAULT: unspecified
maxConnRetryIntvl scalar:Uint16
Max Connect Retry Interval RANGE: [0, 65535]
DEFAULT: 60
operPeerIsDynamic bgp:EnableSt
(scalar:Enum8)
Operational state of the Peer regarding its dynamic status SELECTION:
1 - enabled
2 - disabled
DEFAULT: disabled
operSt bgp:PeerOperSt
(scalar:Enum8)
Operational State SELECTION:
0 - unspecified
1 - illegal
2 - shut
3 - idle
4 - connect
5 - active
6 - open-sent
7 - open-confirm
8 - established
9 - closing
10 - error
11 - unknown
DEFAULT: unspecified
passwdSet bgp:PasswdSet
(scalar:Enum8)
TCP MD5 Authentication SELECTION:
0 - disabled
1 - enabled
DEFAULT: disabled
peerIdx bgp:PeerIdx
(scalar:Uint16)
Peer Index RANGE: [0, 65535]
prevOperSt bgp:PeerOperSt
(scalar:Enum8)
Previous Operational State SELECTION:
0 - unspecified
1 - illegal
2 - shut
3 - idle
4 - connect
5 - active
6 - open-sent
7 - open-confirm
8 - established
9 - closing
10 - error
11 - unknown
DEFAULT: unspecified
rcvCap bgp:CapT
(scalar:Bitmask64)
Received Capability SELECTION:
1 - dynamic
2 - dynamic-mp
4 - dynamic-gr
8 - dynamic-refresh
16 - dynamic-old
32 - refresh
64 - refresh-old
128 - as4
256 - gr
512 - ipv4-ucast
1024 - vpnv4-ucast
2048 - cap
4096 - ipv6-ucast
8192 - vpnv6-ucast
16384 - ipv4-mvpn
32768 - ipv6-mvpn
65536 - ipv4-mcast
131072 - ipv6-mcast
262144 - ipv4-lucast
524288 - ipv6-lucast
1048576 - lnkstate
2097152 - l2vpn-evpn
4194304 - ipv4-mdt
remotePort l4:Port
(scalar:Uint16)
Remote port number of the remote host
RANGE: [0 , 0xffff]
DEFAULT: unspecified
rtrId ip:RtrId
(address:IPv4)
Router ID Value must match ipv4 format
shutStQual bgp:ShutStQual
(scalar:Enum8)
Shut State Qualifier SELECTION:
0 - unspecified
1 - admin
2 - no-mem
3 - exceeded-pfxlimit
4 - admin-up
5 - no-affinity
DEFAULT: unspecified
stReason bgp:StReason
(scalar:Enum8)
Peer Idle State Reason SELECTION:
0 - none
1 - no-mem
DEFAULT: none
type bgp:PeerType
(scalar:Enum8)
Peer Link Type SELECTION:
1 - ibgp
2 - ebgp
DEFAULT: ibgp
updateElapsedTs scalar:Date
Last Update Received Timestamp DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)
The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced