January 2024¶
30 - Genie v24.1¶
Module |
Version |
|---|---|
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
|
24.1 |
Upgrade Instructions¶
pip install --upgrade ats[full] # For internal user
pip install --upgrade pyats[full] # For DevNet user
If you have pyATS installed, you can use:
pyats version update
Changelogs¶
genie.libs.clean¶
Fix¶
- iosxe
Modified copy_to_device clean stage, update logic for image mapping when image is already loaded
New¶
- cheetah
- Added LoadApImage
Added new clean stage load_ap_image
- stages/iosxe
Updated connect stage to support rommon boot
- iosxe
- Added configure_type_access_list_action
API to configure ip/mac access-list with permission
genie.libs.conf¶
Fix¶
- hltapi
Modified traffic_control API to handle calls without mode argument
- nxos
- macsec
added new command ‘ppk crypto-qkd-profile’ under macsec policy config
New¶
- nxos
- Added crypto conf
added crypto qkd cli for conf model
genie.libs.ops¶
genie.libs.robot¶
genie.libs.sdk¶
Fix¶
- iosxe
Removed remove_routing_ip_route
- Modified configure_pppoe_enable_interface
modified api to configure ppp-max-payload
- Modified unconfigure_pppoe_enable_interface
modified api to unconfigure ppp-max-payload
Modified get_firmware_version to handle stack switches
- Modified unconfigure_app_hosting_appid
Added ‘appid’ argument
- Modified configure_fnf_flow_record
added new fields
- iosxr
Modified FileUtils
- sdk-pkg
- iosxe
Fix the copy_file_with_scp api mock data
New¶
- iosxe
- Added configure_mdns_remote_purge_timer
API to configure enable configure mdns remote purge timer
- Added unconfigure_mdns_remote_purge_timer
API to unconfigure mdns remote purge timer
- Added unconfigure_mdns_global_service_buffer
API to unconfigure mdns global service buffer
- Added clear_mdns_cache_remote
API to clear mdns cache remote
- Added configure_mdns_remote_cache_enable
API to configure mdns remote cache enable
- Added unconfigure_mdns_remote_cache_enable
API to unconfigure mdns remote cache enable
- Added configure_mdns_remote_cache_max_limit
API to configure mdns remote cache max limit
- Added unconfigure_mdns_remote_cache_max_limit
API to unconfigure mdns remote cache max limit
- Added configure_mdns_global_service_buffer
API to configure mdns global service buffer
- Added configure_ip_on_atm_interface
added api to configure_ip_on_atm_interface
- Added unconfigure_ip_on_atm_interface
added api to unconfigure_ip_on_atm_interface
Added get_module api
- Added hw_module_beacon_rp_toggle
API to turn beacon on/off for RP and R1
- Added hw_module_beacon_rp_status
API to fetch beacon status for RP and R1
- Added hw_module_beacon_slot_status
API to fetch beacon status for slot
- Added hw_module_beacon_rp_active_standby_status
API to fetch status of the beacon for active/standby RP
- Added clear_lacp_counters
added api to clear_lacp_counters
- Added clear_active_punt_ios_cause
added api to clear_active_punt_ios_cause
- Modified configure_interface_switchport_access_vlan
Modified the configure_interface_switchport_access_vlan API interface to swichport
- Added configure_hw_module_switch_number_ecomode_led
hw-module switch number ecomode led
- Added unconfigure_hw_module_switch_number_ecomode_led
no hw-module switch number ecomode led
Modified copy_file_with_scp
Modified copy_file_with_sftp
- cheetah
- Added execute_archive_download
Added new API execute_archive_download
Modify¶
- iosxe
- Modified configure_virtual_template
modified api to configure ipv6_pool_name
- Modified configure_bba_group
modified api to configure tag ppp-max-payload
- Modified configure_device_classifier_command
added optional timeout value
- Modified configure_device_classifier
added optional timeout value
Add¶
- iosxe
- Added API clear_ip_dhcp_snooping_statistics
API added to clear ip dhcp snooping statistics
genie.libs.parser¶
Fix¶
- iosxe
- Modified ShowBgpNeighborsAdvertisedRoutesSuperParser
Updated regex pattern <p3_1> to accommodate various outputs.
- Modified ShowClnsIsNeighborsDetail
Updated regex pattern <p2> to accommodate various outputs.
- Modified ShowInterfaces
Added regex pattern <p53> to capture value of carrier transitions
- Modified ShowPlatformSoftwareFedSwitchActiveVpSummaryVlan Parser
Fixed parser to execute show comman on svl, HA and SA devices
- Modified ShowEnvironment Parser
Modified the p4 regex pattern to capture missing data.
- Modified ShowRunningConfigNve
Fixed regex <p2> and <p3> to accomodate various values and to fix MAC value regex.
Changed key <serial> in schema to optional
- Modified ShowRunningConfigNve
Added regex <p5_4> and <p5_5>.
Update code for <p3_8> to include space between ‘ipv4’ and ‘mask’ key.
- Modify ShowPlatformSoftwareDistributedIpsecTunnelInfo
Updated parser to validate per tunnel info
- Modified ShowIpNhrpNhsDetail Parser
parser for ‘show ip nhrp nhs {tunnel} detail’ Modified schema and regex pattern
- Fix for ShowSpanningTreeInterface
Modified regular expression in order to satisfy P2p Peer (STP)
- Modified parser ShowHardwareLed
Enhanced the parser to get LED Ecomode status, Added schema and regex pattern <p12_1>
- Modified parser ShowProcessesCpuSorted
Fixed schema and regex pattern
- Fix for ShowEnvironmentSuperParser
added p1_3 match pattern
- Modified ShowIpMfib
To support interface port-channel type in iif and oif
Additional handling for egress_data
Sample output for iif Port-channel5 Flags RA A MA
Sample output for oif Port-channel5 Flags RF F NS
- Modified ShowIpv6Mfib
To support interface port-channel type in iif and oif
Additional handling for egress_data
Sample output for iif Port-channel5 Flags RA A MA
Sample output for oif Port-channel5 Flags RF F NS
- Modified ShowLispEthernetMapCachePrefix Parser
Made prefix-location optional
- Added
Added condition for channel_group in pagp_dad_obj
- Fixed ShowControllerVDSLSchema parser
Fixed schema for ‘modem_fw__version’ & ‘modem_phy_version’ for show controller vdsl {slot_no}
- Modified ShowEtherchannelProtocol
Fix P1_1 regular expression.
- Adding parser for ShowIpOspfRibRoute
Added ShowIpOspfRibRoute for “show ip ospf rib <>”
- Modified ShowIpv6RouteWord
Added support for parsing output with LISP interfaces
- Modified ShowRunningConfigNve
Added regex <p5_6> and <p5_7> for keys ‘data_mdt_group’, ‘data_mdt_group_mask’ and ‘data_mdt_threshold’
- Modified ShowMplsForwardingTable
Added bytes_label_switched to exclude
- nxos
- Fix for ShowRunningConfigInterface
Added p20 regex to match the user’s data.
- Modified ShowRunningConfigBgp
Updated code for <p32> to match the list of values.
- Modified ShowInterfaceStatus
Refactored regex pattern to accommodate modern outputs from Nexus 9000 series and be easier to maintain overall.
- Added
Updated regex pattern for <p31>
- Modified ShowRunningConfigInterface
Modified schema to store secondary ip address
Improved p17 regex to capture proper ip address
Added p21 regex to capture secondary ip address
- iosxr
- Modified ShowBgpL2vpnEvpnSummary Parser
Added regex p8a and p8b
Added code in pattern <p8a> and <p8b>
- Modified ShowIsisDatabaseDetail
Added pattern <r26> to parse line ‘Metric 10 MT (IPv6 Unicast) IPv6-Ext-InAr fc00a00020003/128’
Modified pattern <r25> code to parse multiple srv6 locator lines
- Modified ShowOspfNeighbor
Modified schema and code to store multiple neighbor values into a list
- Modified ShowL2vpnBridgeDomainDetail
Modified schema and existing code to have separate entry for access pw
Modified regex p27 to fix mismatch pw_class and xc_id value
- Modified ShowBgpVrfAfPrefix Parser
Added code in pattern <p11>
Added keys <group_best, backup, add_path, import_candidate, imported, redistributed> in schema as optional parameters
Modified ‘r_value’ key as optional parameter
- viptela
- Modified ShowOmpRoutes
Added tenant key as option.
Updated regex pattern p1 and p2 to accommodate various outputs.
- iosxe/c9600/c9606r
- Modified ShowPlatformHardwareFedActiveTcamUtilization
Added command for switch mode standby
- Modified ShowPlatformTcamPbrNat
Added command for switch mode active
- common
Updated pyats configuration import
- Modified .gitignore
Added the
venv/directory to the .gitignore file. Common convention dictates that Python virtual environments are stored in a directory namedvenv, which should not be committed to a repository.
New¶
- ios
- Added ShowVlanInternalUsage
show vlan internal usage
- iosxe
- Added ShowPlatformSoftwareMatmSwitchTable
Parser for cli ‘show platform software matm switch {switch} {slot} table’
- Added ShowIsisNeighborSuperParser
Added super parser for show isis neighbor and schema
Added parser for show isis neighbor and show isis neighbor detail
- Added ShowMdnsSdCache
parser for ‘show mdns-sd cache remote’
- Added ShowPlatformSoftwareMemoryDatabaseFedSwitchActiveCallsite
show platform software memory database fed {switch} {switch_var} callsite
- Added ShowIPNameServer Parser in show_ip.py
- show ip name-servers
show ip name-servers vrf {vrf}
- Added ShowPlatformSoftwareFedSwitchActiveNatAcl
Parser for cli ‘show platform software fed switch active nat acl’
- Added ShowPlatformSoftwareFedSwitchActiveNatFlows
Parser for cli ‘show platform software fed switch active nat flows’
- Added ShowPlatformSoftwareFedSwitchActivePuntBrief
Parser for cli ‘show platform software fed switch active punt ios-cause brief’
- Added ShowIsisIpv6RibParser
Added parser for show isis ipv6 rib and schema
- Added ShowDiagnosticStatus
Added parser for show diagnostic status
- Added ShowL2routeEvpnEs
show l2route evpn es
show l2route evpn es esi {esi}
show l2route evpn es origin-rtr {origin_rtr}
show l2route evpn es origin-rtr {origin_rtr} esi {esi}
show l2route evpn es producer {producer}
show l2route evpn es producer {producer} origin-rtr {origin_rtr}
show l2route evpn es producer {producer} origin-rtr {origin_rtr} esi {esi}
- iosxr
- Added ShowBgpL2vpnEvpnSummary
Added parser for show bgp l2vpn evpn summary
- Added ShowBgpAddressFamily
Added parser for show bgp
Added parser for show bgp {address_family}
- Modified ShowBgpInstanceSummary
Modified pattern <p11> to parse both lines ‘Table ID 0x0’ and ‘Table ID 0x0 RD version 0’
Modified pattern <p15> to parse line ‘BGP scan interval 60 secs’
- generic
- Show version
Added support for cheetah/ap
Add¶
- iosxe
Added ShowTerminal Parser