January 2022

January 25 - Genie v22.1

Module	Version
genie	22.1
genie.libs.health	22.1
genie.libs.clean	22.1
genie.libs.conf	22.1
genie.libs.filetransferutils	22.1
genie.libs.ops	22.1
genie.libs.parser	22.1
genie.libs.robot	22.1
genie.libs.sdk	22.1
genie.telemetry	22.1
genie.trafficgen	22.1

Upgrade Instructions

pip install --upgrade ats[full] # For internal user
pip install --upgrade pyats[full] # For DevNet user

If you have pyATS installed, you can use:

pyats version update

Changelogs

genie

Fix

• genie harness

  • Updated jinja2 config rendering error logging

  • Updated datafile schema

    • Added ‘parameters’/’variables’ to datafile schema

• genie conf device

  • added ‘timeout’ argument to device.parse()

genie.libs.clean

New

• iosxe

  • Added ApplySelfSignedCert

    • Added new clean stage called apply self signed certificate

• common

  • Added

    • CopyRunToFlash Stage

• stages

  • IOSXE

    • CAT9K

      • Update the tftp boot to support stack devices

      • update the dailog.py for IOSXE devices

    • cat3k

      • Added dialog.py for cat3k

      • Added UT for TftpBoot clean stage apis

      • Added support for copy to device for stack devices

      • Added apis for change boot variable

Fix

• iosxe

  • Connect to devices in rommon mode

  • Use reload service for install image stage

genie.libs.conf

Fix

• bgp

  • Modified BGP conf model

    • Added support for 4 byte AS number support in BGP id

• nxos

  • Modified pim conf model

    • Added defensive check on attributes to avoid errors when attributes member is not populated

  • Added tunnel_encryption

    • Added tunnel encryption attribute for tunnel encryption interfaces

genie.libs.filetransferutils

Fix

• genie.filetransferutils

  • Add support for http dynamic fileserver testbed config

  • Make fileserver subnet configuration optional

genie.libs.health

Fix

• health_yamls

  • Updated pyats_health.yaml

    • Added timeout 120 secs to health_cpu/health_memory

genie.libs.ops

genie.libs.robot

genie.libs.sdk

New

• iosxe

  • Added ‘configure access vlan’ API

    • creating access vlan and adding interface

  • Added ‘show mac address table| i count’ API

    • api to display final mac count without displaying all mac address enties

  • Added ‘udld port alert’ API

    • configuring udld alert only mode on interface

  • Added ‘trigger udld tx drop’ API

    • configuring udld transmiddion drop on interface

  • Added API ‘configure_ip_igmp_snooping_querier’

  • Added API ‘unconfigure_ip_igmp_snooping_querier’

  • Added API ‘configure_ip_igmp_snooping_vlan_querier’

  • Added API ‘unconfigure_ip_igmp_snooping_vlan_querier’

  • Added API ‘configure_ip_igmp_snooping_vlan_query_version’

  • Added API ‘unconfigure_ip_igmp_snooping_vlan_query_version’

  • Added API ‘configure_ipv6_mld_snooping’

  • Added API ‘unconfigure_ipv6_mld_snooping’

  • Added API ‘configure_ipv6_mld_snooping_querier_version’

  • Added API ‘unconfigure_ipv6_mld_snooping_querier_version’

  • Added API ‘configure_ipv6_mld_snooping_querier_address’

  • Added API ‘unconfigure_ipv6_mld_snooping_querier_address’

  • Added API ‘configure_ipv6_mld_snooping_vlan_querier_version’

  • Added API ‘unconfigure_ipv6_mld_snooping_vlan_querier_version’

  • Added API ‘configure_vrf_definition_stitching’

  • Added API ‘unconfigure_vrf_definition_stitching’

  • Added API ‘configure_static_ip_pim_rp_address’

  • Added API ‘configure_static_ipv6_pim_rp_address’

  • Added API ‘unconfigure_static_ip_pim_rp_address’

  • Added API ‘unconfigure_static_ipv6_pim_rp_address’

  • Added API ‘unconfig_disable_ipv6_routing’

  • Added API ‘configure_ip_multicast_routing’

  • Added API ‘unconfigure_ip_multicast_routing’

  • Added API ‘configure_ip_multicast_vrf_routing’

  • Added API ‘unconfigure_ip_multicast_vrf_routing’

  • Added API ‘configure_interface_storm_control_level’

    • configure storm-control level under interface

  • Added API ‘unconfigure_interface_storm_control_level’

    • unconfigure storm-control level under interface

  • Added API ‘configure_interface_storm_control_action’

    • configure storm-control action under interface

  • Added API ‘unconfigure_interface_storm_control_action’

    • unconfigure storm-control action under interface

  • Added API ‘configure_platform_sudi_cmca3’

  • Added API ‘unconfigure_platform_sudi_cmca3’

  • Added API ‘configure_service_private_config_encryption’

  • Added API ‘unconfigure_service_private_config_encryption’

  • Added API ‘verify_Parser_Encrypt_decrypt_File_Status’

  • Added API ‘verify_cmca3_certificates’

  • Added API ‘verify_crypto_entropy_status’

  • Added API ‘verify_crypto_pki_certificate’

  • Added API ‘verify_hardware_slot’

  • Added API ‘verify_hw_auth_status’

  • Added API ‘verify_sudi_cert’

  • Added API ‘verify_sudi_pki’

  • Added configure_hqos_policer_map API

    • API for configuring hqos policy map for service-policy.

  • Added API ‘configure_nve_interface’ in evpn

  • Added API ‘unconfigure_nve_interface’ in evpn

  • Added API ‘configure_interface_pim’ in mcast

  • Added API ‘unconfigure_interface_pim’ in mcast

  • Added config_mka_policy API

    • API for configuring MKA Policy globally and also interface level

  • Added unconfig_macsec_should_secure API

    • API for Removal of Should secure on interface level

  • Added config_macsec_should_secure API

    • API for Configuring Should secure on interface level

  • Added unconfig_mka_policy API

    • API for unconfiguring MKA Policy globally and also interface level

  • Added configure_default_mpls_mldp api

  • Added configure_mdt_data_mpls_mldp api

  • Added configure_mdt_data_threshold api

  • Added configure_mdt_partitioned_mldp_p2mp api

  • Added configure_mdt_preference_under_vrf api

  • Added configure_mdt_strict_rpf_interface_vrf api

  • Added configure_multicast_routing_mvpn_vrf api

  • Added configure_vpn_id_in_vrf api

  • Added unconfigure_mdt_data_threshold api

  • Added ‘clear_mdns_cache’ API

    • clears mDNS cache

  • Added ‘clear_mdns_statistics_all’ API

    • clears mDNS statistics

  • Added ‘clear_mdns_statistics_sp_sdg’ API

    • clears mDNS statistics sp(Service Peer)_sdg(Agent)

  • Added ‘clear_mdns_statistics_servicepeer’ API

    • clears mDNS statistics sp(Service Peer)

  • Added ‘configure_mdns_boot_level_license’ API

    • Configures mDNS boot level license

  • Added config_vlan_range API

    • To configure vlan for a range

  • Added unconfig_vlan_range API

    • To unconfigure vlan for a range

  • Added config_portchannel_range API

    • To configure portchannel for a range

  • Added ‘unconfigure_ipv6_mld_snooping_querier_version’ API

    • Added doc string to unconfigure.

  • Added ‘configure_ipv6_mld_snooping_querier_address’ API

    • Changed Args headline for ipv6_address and updated ipv6 MLD querier source IPv6 address

  • Added execute_issu_install_package API

    • To execute issu install packages on device

  • Added verify_wireless_management_trustpoint_name

    • Added new api to verify wireless management trustpoint

  • Added verify_pki_trustpoint_state

    • Added new api to verify crypto pki trustpoint

  • Added get_wireless_management_trustpoint_name

    • Added new api to get wireless management trustpoint certificate name

  • Added get_pki_trustpoint_state

    • Added new api to get crypto pki trustpoint key state

  • Added execute_self_signed_certificate_command

    • Added new file called execute.py where all execute commands can be written

    • Added api to execute command that installs self-signed certificate

  • Added enable_http_server

    • Added new file called configure.py where all configure commands can be written

    • Added api to configure ip http server on controller

  • Added set_clock_calendar

    • Added api to configure valid clock calendar

  • Added configure_pki_trustpoint API

    • Configures Trustpoint on device

  • Added unconfigure_pki_trustpoint API

    • Unconfigures Trustpoint on device

  • Added configure_pki_export_pem API

    • Generates a certificate in device

  • Added configure_pki_authenticate_certificate API

    • Pastes the pagent certificate in the device

  • Added unconfigure_crypto_pki_server API

    • Unconfigures Crypto PKI server on device

  • Added configure_crypto_pki_server API

    • Configures Crypto PKI server on device

  • Added configure_pki_enroll_certificate API

    • Enrolls certificate on device

  • Added ignore modules argument for verify_module_status api

  • Added

    • Added new API config_port_security_on_interface, configuring port security on interface.

  • Added disable_ipv6_dhcp_server API

    • unconfigures ipv6 dhcp server on interface

  • Added configure_dhcp_pool_ipv6_domain_name API

    • configures domain name under dhcp pool on device

  • Added enable_ipv6_address_dhcp API

    • enables ipv6 address dhcp on interface

  • Added disable_ipv6_address_dhcp API

    • disables ipv6 address dhcp on interface

  • Added configure_ipv6_ospf_mtu_ignore API

    • Configures ipv6 ospf mtu-ignore on interface

  • Added unconfigure_ipv6_ospf_mtu_ignore API

    • Unconfigures ipv6 ospf mtu-ignore on interface

  • Added configure_ipv6_ospf_routing_on_interface API

    • Configures ipv6 ospf routing instance on interface

  • Added unconfigure_ipv6_ospf_routing_on_interface API

    • Unconfigures ipv6 ospf routing instance on interface

  • Added unconfig_interface_ospfv3 API

    • unconfigures ospfv3 on interface

• utils

  • Added get_interface_attr_from_yaml

    • get attribute value of a interface from topology in testbed object

• clean/reload

  • Added an argument to ignore modules during check modules step.

• iosxr

  • Added ignore modules argument for verify_module_status api

• nxos

  • Added ignore modules argument for verify_module_status api

• added new api configure_control_policies, configuring policy-map.

• added new api clear_port_security, clearing port security stats, clear port-security all.

• added new api unconfig_vlan_tag_native, unconfig vlan dot1q tag native.

Fix

• iosxe

  • Fix config_mka_keychain_on_interface API

    • API for Configuring Primary MKA Key chain and fallback MKA Key chain on interface level

  • Updated ‘configure_mdns’ API

    • Added if condition for creating only one service list with direction and definition name

  • Modified verify_ip_mac_binding_in_network

    • Added verify_reachable option to require entries to be reachable

  • Fixed get_ip_theft_syslogs

    • Corrected to support new syslog output

  • Modified verify_module_status API to ignore empty slots

  • Updated get_md5_hash_of_file API to use 180s default timeout

  • Updated health_cpu API

    • Added ‘timeout’ argument

  • Updated health_memory API

    • Added ‘timeout’ argument

• generic

  • Updated copy_from_device and copy_to_device APIs to support dynamic HTTP fileserver

• api utils

  • Modified api_unittest_generator

    • Proxy connection raises proper error message

• iosxr

  • Added c8000 platform for get_mgmt APIs

  • Updated health_cpu API

    • Added ‘timeout’ argument

  • Updated health_memory API

    • Added ‘timeout’ argument

• blitz

  • actions_helper

    • Fixed the issue with configure_dual

  • Added gnmi_util module for message constuction

    • Fixed OpenConfig module gNMI message building for complex RPCs.

    • Fixed “empty” error when gNMI return message does not validate zero value.

    • Negative range not validating return message values.

  • Added protobuf and cisco-gnmi dependency for genie.libs.sdk package

  • Updated rest_handler

    • Fixed ‘save’ handling in ‘rest’ action

• apic

  • Updated apic_rest_get API

    • Added order_by argument support

• nxos

  • Updated health_cpu API

    • Added ‘timeout’ argument

  • Updated health_memory API

    • Added ‘timeout’ argument

  • Updated nxapi_method_nxapi_rest API

    • Fixed wrong avariable name to show proper error message

genie.libs.parser

New

• iosxe

  • Added MonitorCaptureStop parser

    • monitor capture {capture_name} stop

  • Added ShowCryptoPkiTimerDetail

    • show crypto pki timer detail

  • Added ShowCryptoPkiServerRequests

    • show crypto pki server {server} request

  • Added ShowIpv6MldSnoopingGroups

    • show ipv6 mld snooping address vlan {vlan_id}

  • Added class ShowLispPlatformStatistics

    • show lisp platform statistics

  • Added ShowLispSiteDetail

    • show lisp site detail

    • show lisp site name {site_name}

    • show lisp site {eid}

    • show lisp site {eid} instance-id {instance_id}

    • show lisp site {eid} eid-table {eid_table}

    • show lisp site {eid} eid-table vrf {vrf}

    • show lisp {lisp_id} site detail

    • show lisp {lisp_id} site name {site_name}

    • show lisp {lisp_id} site {eid}

    • show lisp {lisp_id} site {eid} instance-id {instance_id}

    • show lisp {lisp_id} site {eid} eid-table {eid_table}

    • show lisp {lisp_id} site {eid} eid-table vrf {vrf}

    • show lisp locator-table {locator_table} site detail

    • show lisp locator-table {locator_table} site name {site_name}

    • show lisp locator-table {locator_table} site {eid}

    • show lisp locator-table {locator_table} site {eid} instance-id {instance_id}

    • show lisp locator-table {locator_table} site {eid} eid-table {eid_table}

    • show lisp locator-table {locator_table} site {eid} eid-table vrf {vrf}

  • Added ShowLispEthernetServerDetail

    • show lisp instance-id {instance_id} ethernet server detail

    • show lisp instance-id {instance_id} ethernet server name {site_name}

    • show lisp instance-id {instance_id} ethernet server {eid}

    • show lisp instance-id {instance_id} ethernet server etr-address {etr_address}

    • show lisp {lisp_id} instance-id {instance_id} ethernet server detail

    • show lisp {lisp_id} instance-id {instance_id} ethernet server name {site_name}

    • show lisp {lisp_id} instance-id {instance_id} ethernet server {eid}

    • show lisp {lisp_id} instance-id {instance_id} ethernet server etr-address {etr_address}

    • show lisp eid-table vrf {vrf} ethernet server detail

    • show lisp eid-table vrf {vrf} ethernet server name {site_name}

    • show lisp eid-table vrf {vrf} ethernet server {eid}

    • show lisp eid-table vrf {vrf} ethernet server etr-address {etr_address}

    • show lisp locator-table {locator_table} instance-id {instance_id} ethernet server detail

    • show lisp locator-table {locator_table} instance-id {instance_id} ethernet server name {site_name}

    • show lisp locator-table {locator_table} instance-id {instance_id} ethernet server {eid}

    • show lisp locator-table {locator_table} instance-id {instance_id} ethernet server etr-address {etr_address}

  • Added ShowLispIpv4ServerDetail

    • show lisp instance-id {instance_id} ipv4 server detail

    • show lisp instance-id {instance_id} ipv4 server name {site_name}

    • show lisp instance-id {instance_id} ipv4 server { }

    • show lisp instance-id {instance_id} ipv4 server etr-address {etr_address}

    • show lisp {lisp_id} instance-id {instance_id} ipv4 server detail

    • show lisp {lisp_id} instance-id {instance_id} ipv4 server name {site_name}

    • show lisp {lisp_id} instance-id {instance_id} ipv4 server {eid}

    • show lisp {lisp_id} instance-id {instance_id} ipv4 server etr-address {etr_address}

    • show lisp eid-table {eid_table} ipv4 server detail

    • show lisp eid-table {eid_table} ipv4 server name {site_name}

    • show lisp eid-table {eid_table} ipv4 server {eid}

    • show lisp eid-table {eid_table} ipv4 server etr-address {etr_address}

    • show lisp eid-table vrf {vrf} ipv4 server detail

    • show lisp eid-table vrf {vrf} ipv4 server name {site_name}

    • show lisp eid-table vrf {vrf} ipv4 server {eid}

    • show lisp eid-table vrf {vrf} ipv4 server etr-address {etr_address}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv4 server detail

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv4 server name {site_name}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv4 server {eid}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv4 server etr-address {etr_address}

  • Added ShowLispIpv6ServerDetail

    • show lisp instance-id {instance_id} ipv6 server detail

    • show lisp instance-id {instance_id} ipv6 server name {site_name}

    • show lisp instance-id {instance_id} ipv6 server {eid}

    • show lisp instance-id {instance_id} ipv6 server etr-address {etr_address}

    • show lisp {lisp_id} instance-id {instance_id} ipv6 server detail

    • show lisp {lisp_id} instance-id {instance_id} ipv6 server name {site_name}

    • show lisp {lisp_id} instance-id {instance_id} ipv6 server {eid}

    • show lisp {lisp_id} instance-id {instance_id} ipv6 server etr-address {etr_address}

    • show lisp eid-table {eid_table} ipv6 server detail

    • show lisp eid-table {eid_table} ipv6 server name {site_name}

    • show lisp eid-table {eid_table} ipv6 server {eid}

    • show lisp eid-table {eid_table} ipv6 server etr-address {etr_address}

    • show lisp eid-table vrf {vrf} ipv6 server detail

    • show lisp eid-table vrf {vrf} ipv6 server name {site_name}

    • show lisp eid-table vrf {vrf} ipv6 server {eid}

    • show lisp eid-table vrf {vrf} ipv6 server etr-address {etr_address}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv6 server detail

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv6 server name {site_name}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv6 server {eid}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv6 server etr-address {etr_address}

  • Added class ShowDlepClients

  • Added class ShowDlepNeighbors

  • Modified ShowLispExtranet

    • Updated schema,regex patterns and logic to handle updated device output from show command

  • Added ShowCryptoEntropyStatus

    • show crypto entropy status

  • Added ShowPlatformSudiPki

    • show platform sudi pki

  • Added ShowPlatformHardwareAuthenticationStatus

    • show platform hardware authentication status

  • Added ShowCryptoIkev2StatsExt

    • show crypto ikev2 stats ext-service

  • Added ShowCryptoPkiServer

    • show crypto pki server

  • Added ShowCryptoSessionRemoteDetail

    • show crypto session remote {remote_ip} detail

  • Added ShowCryptoSessionRemote

    • show crypto session remote {remote_ip}

  • Added class ShowCtsRoleBasedSgtMapAll

    • show cts role-based sgt-map all

    • show cts role-based sgt-map all vrf <vrf> all

  • Added class ShowCtsSxpConnections

    • show cts sxp connections

    • show cts sxp connections vrf <vrf>

  • Added class ShowCtsSxpSgtMapBrief

    • show cts sxp sgt-map brief

    • show cts sxp sgt-map vrf <vrf> brief

  • Added ShowInterfacesSummary

    • show interfaces summary

    • show interfaces {interface} summary

  • Added ShowIpv6Mfib

    • show ipv6 mfib

    • show ipv6 mfib {group}

    • show ipv6 mfib {group} {source}

    • show ipv6 mfib verbose

    • show ipv6 mfib {group} verbose

    • show ipv6 mfib {group} {source} verbose

    • show ipv6 mfib vrf {vrf}

    • show ipv6 mfib vrf {vrf} {group}

    • show ipv6 mfib vrf {vrf} {group} {source}

    • show ipv6 mfib vrf {vrf} verbose

    • show ipv6 mfib vrf {vrf} {group} verbose

    • show ipv6 mfib vrf {vrf} {group} {source} verbose

  • Added ShowIpv6Mrib

    • added the new parser for cli “show ipv6 mrib route”

    • show ipv6 mrib route

    • show ipv6 mrib route {group}

    • show ipv6 mrib route {group} {source}

    • show ipv6 mrib vrf {vrf} route

    • show ipv6 mrib vrf {vrf} route {group}

    • show ipv6 mrib vrf {vrf} route {group} {source}

  • Added ShowIsisRibRedistribution

    • show isis rib redistribution

  • Added ShowLicenseTechSupport

    • show license tech support

  • Added ShowLispRegistrationHistory

    • ‘show lisp {lisp_id} instance-id {instance_id} {address_family} server {eid} registration-history’

    • ‘show lisp {lisp_id} instance-id {instance_id} {address_family} server registration-history’

    • ‘show lisp {lisp_id} instance-id {instance_id} {address_family} server {address_resolution} {eid} registration-history’

    • ‘show lisp instance-id {instance_id} {address_family} server registration-history’

    • ‘show lisp server registration-history’

  • Added ShowPlatformHardwareChassisFantrayDetailSwitch

    • show platform hardware chassis fantray detail switch {mode}

  • Added ShowPlatformHardwareChassisPowerSupplyDetailSwitchAll

    • show platform hardware chassis power-supply detail switch {mode} all

  • Added ShowPlatformSoftwareCpmSwitchB0CountersDrop

    • show platform software cpm switch {mode} B0 counters drop

  • Added ShowPlatformSoftwareCpmSwitchB0CountersPuntInject

    • show platform software cpm switch {mode} B0 counters punt-inject

  • Added ShowPlatformSoftwareCpmSwitchB0IpcDetail

    • show platform software cpm switch {mode} B0 ipc detail

  • Added ShowPlatformSoftwareCpmSwitchB0IpcBrief

    • show platform software cpm switch {mode} B0 ipc brief

  • Added ShowPlatformSoftwareCpmSwitchB0ControlInfo

    • show platform software cpm switch {mode} B0 control-info

  • Added ShowPlatformSoftwareCpmSwitchB0Resource

    • show platform software cpm switch {mode} B0 resource

  • Added ShowIdpromInterface

    • show idprom interface {mode}

  • Added ShowPlatformSoftwareBpCrimsonContentConfig

    • show platform software bp crimson content config

  • Added ShowPlatformSoftwareNodeClusterManagerSwitchB0Node

    • show platform software node cluster-manager switch {mode} B0 node {node}

  • Added ShowPlatformSoftwareNodeClusterManagerSwitchB0Local

    • show platform software node cluster-manager switch {mode} B0 local

  • Added ShowPlatformSoftwareTdlContentBpConfig

    • show platform software tdl-database content bp config {mode}

  • Added ShowPlatformSoftwareTdlContentBpOper

    • show platform software tdl-database content bp oper {mode}

  • Added ShowPlatformSoftwareNodeClusterManagerSwitchB0Counters

    • show platform software node cluster-manager switch {mode} B0 counters

  • Added ShowPlatformSoftwareBpCrimsonCounterOper

    • show platform software bp crimson content oper

  • Added ShowPlatformSoftwareBpCrimsonStatistics

    • show platform software bp crimson statistics

  • Added ShowStackwiseVirtualBandwidth

    • show stackwise-virtual bandwidth

  • Added ShowMdnsSdControllerDetail

    • Parser for Show Mdns-Sd Controller Detail

  • Fixed ShowDeviceTrackingDatabaseInterface parser

    • Modified regexp to match network_layer_address and link_layer_address

  • Fixed ShowRunInterface parser

    • Added regexp to grep ipv6_nd_raguard_attach_policy and device_tracking_attach_policy

  • ShowIsisRib

    • Added the ability to parser the cli command show isis rib flex-algo

  • Added ShowLispIpv4ServerExtranetPolicyEid

    • show lisp instance-id {instance_id} ipv4 server extranet-policy {prefix}

    • show lisp {lisp_id} instance-id {instance_id} ipv4 server extranet-policy {prefix}

    • show lisp eid-table {eid_table} ipv4 server extranet-policy {prefix}

    • show lisp eid-table vrf {vrf} ipv4 server extranet-policy {prefix}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv4 server extranet-policy {prefix}

  • Added ShowLispIpv6ServerExtranetPolicyEid

    • show lisp instance-id {instance_id} ipv6 server extranet-policy {prefix}

    • show lisp {lisp_id} instance-id {instance_id} ipv6 server extranet-policy {prefix}

    • show lisp eid-table {eid_table} ipv6 server extranet-policy {prefix}

    • show lisp eid-table vrf {vrf} ipv6 server extranet-policy {prefix}

    • show lisp locator-table {locator_table} instance-id {instance_id} ipv6 server extranet-policy {prefix}

  • Added ShowPolicyMapTypeInspectZonePair

    • show policy-map type inspect zone-pair {zone_pair_name}

    • show policy-map type inspect zone-pair

  • Modified ShowVlanId

    • Added support vlan-name to be more diverse, including “ “, “-”, “_”

• iosxr

  • Added ShowEventManagerEnv

    • show event manager environment

    • show event manager environment all

    • show event manager environment | include {event_name}

  • Added ShowEventManagerPolicyRegistered

    • show event manager policy registered

    • show event manager policy registered {type}

    • show event manager policy registered {type} | include {eemfile_name}

  • Added ShowEventManagerPolicyAvailable

    • show event manager policy available

    • show event manager policy available {type}

    • show event manager policy available {type} | include {eemfile_name}

  • Added ShowRipIpv6

    • show rip ipv6

    • show rip ipv6 vrf {vrf}

  • Added ShowRipIpv6Statistics

    • show rip ipv6 statistics

    • show rip ipv6 vrf {vrf} statistics

  • Added ShowRipIpv6Database

    • show rip ipv6 database

    • show rip ipv6 vrf {vrf} database

  • Added ShowRipIpv6Interface

    • show rip ipv6 interface

    • show rip ipv6 vrf {vrf} interface

• generic

  • Modified ShowVersion

    • Added Optional <os_flavor> key to schema to better handle IOSXR show version output

• nxos

  • Added ShowForwardingIpv4Recursive

    • show forwarding ipv4 recursive

    • show forwarding ipv4 recursive vrf {vrf}

• ios

  • Added ShowPolicyMapTypeInspectZonePair

    • show policy-map type inspect zone-pair {zone_pair_name}

    • show policy-map type inspect zone-pair

Fix

• iosxe

  • Modified ShowMdnsSdSpSdgStatistics

    • Added support to agent and sp

  • Modified ShowMdnsSdSummaryVlan

    • Added support to agent and sp

  • Added TracerouteMPLSIPv4 parser

    • traceroute mpls ipv4 {addr} {mask}

  • Fixed ShowInterfacesStatusErrDisabled parser

    • Modified regexp to grep all kind of reasons

  • Fixed ShowFlowRecord Schema

    • Modified match_list and collect_list to Optional arg in schema as those are not mandate

  • Modified ShowAccessLists

    • Add support to role-based acl

  • Modified ShowIpPimTunnel

    • Modified to support different address family and vrf

  • Modified ShowIsisRibSchema

    • Added a new key to differentiate output by level type

    • Changed the flex algo key to contain a set of associated prefixes

    • No backwards compatibility

  • Modified ShowIsisRib

    • Modified a regex to parse lines starting with Prefix-SID index

  • Modified ShowSegmentRoutingTrafficEngPolicy

    • Added regex pattern p3_1 to handle different output

    • Added regex pattern p6_1 to handle different output

  • Modified ShowStormControl

    • Added support for pps/bps

    • Added support for command “show storm-control”

  • Modified ShowStormControl

    • Added support for Unknown-Unicast

  • Modified ShowInterfacesSwitchport

    • Fixed issue when parsing single interface that belongs to a port channel

  • Modified ShowLispServiceSummary

    • Fixed missing router ID when no banner

    • Added support for maximum db and map-cache values

  • Modified ShowRomVarSchema

    • Added “default_gateway,ip_address,crashinfo,subnet_mask” field to schema.

  • Modified ShowRomVar

    • Modified Regular Expression to handle if any value is provided with “” or without codes. Also modified to deal spaces in regular expression.

    • For few variables added len check for value. if value for that key is empty then that key will not be added to master key i.e rommon_variable.

  • Modified ShowBgpAllDetail

    • Updated the Schema to handle ‘binding_sid’ field

    • Added regex p20 and p20_1 to match the binding_sid

• generic

  • Modified ShowVersion

    • Modified schema key <model> to <pid>

• viptela

  • Modified ShowSystemStatus

    • Refactored parser to adhere to standard parser format

    • Modified almost all regexes and logic

• nxos

  • Modified ShowBgpSessions

    • Updated regex pattern p6_1 to split up ‘nei’ from ‘linklocal_interfaceport’