April 2023

April 25 - Genie v23.4

Module

Version

genie

23.4

genie.libs.health

23.4

genie.libs.clean

23.4

genie.libs.conf

23.4

genie.libs.filetransferutils

23.4

genie.libs.ops

23.4

genie.libs.parser

23.4

genie.libs.robot

23.4

genie.libs.sdk

23.4

genie.telemetry

23.4

genie.trafficgen

23.4

Upgrade Instructions

pip install --upgrade ats[full] # For internal user
pip install --upgrade pyats[full] # For DevNet user

If you have pyATS installed, you can use:

pyats version update

Changelogs

genie

Fix
  • harness
    • Modified Verifications

      • Enhanced to output diff when Verification fails and keep attempting

  • base
    • Enhanced CleanAPI

      • Added template argument to overwrite template

genie.libs.clean

New
  • iosxe
    • Modified install_image stage

      • Added issue upgrade option

    • Modified reload stage

      • Added license option to check and fix license inconsistency on device

genie.libs.conf

genie.libs.filetransferutils

Fix
  • iosxe
    • Modified FileUtils class

      • Fix send_cli_to_device function to work properly with destination directory

genie.libs.health

genie.libs.ops

genie.libs.robot

genie.libs.sdk

New
  • iosxe
    • Added configure_ip_arp_inspection_on_interface

      • New API to configure ip arp inspection on interface

    • Added unconfigure_ip_arp_inspection_on_interface

      • New API to unconfigure ip arp inspection on interface

    • Added configure_interface_split_horizon_eigrp API

      • API to configure interface split horizon eigrp for ip and ipv6

    • Added unconfigure_interface_split_horizon_eigrp API

      • API to unconfigure interface split horizon eigrp for ip and ipv6

    • Added configure_ospfv3_network_range

      • API for configure the ospfv3 network range

    • Added configure_ospfv3_on_interface

      • API for configure the ospfv3 area and pid on interface

    • Modified configure_ptp_modes

      • Modified/Added ptp destination-mac non-forwardable on device

    • Added unconfigure_ptp_aes67_rates

      • API for unconfigure ptp aes67 rates

    • Added configure_ptp_vlan

      • API for configure ptp vlan on device

    • Added unconfigure_ptp_vlan

      • API for unconfigure ptp vlan on device

    • Added configure_ptp_source

      • API configure ptp source on device

    • Added unconfig_diagnostic_monitor_threshold

      • New API to Unconfgure diagnostics monitor threshold on switch

    • Added unconfig_banner

      • New API to Unconfig day banner

    • Added config_load_interval_on_interface

      • New API to configure load interval on interface

    • Added configure_logging_facility

      • New API to configure logging facility

    • Added configure_login_log

      • New API to configure login log on switch

    • Added configure_logging_host_transport_tcp_port

      • New API to configure logging host transport tcp port

    • Added configure_logging_snmp_trap {type}

      • API configure_logging_snmp_trap alerts,critical,debugging,emergencies,errors etc

    • Added unconfigure_logging_snmp_trap {type}

      • API unconfigure_logging_snmp_trap alerts,critical,debugging,emergencies,errors etc

    • Added unconfigure_netconf_yang_polling

      • API for unconfigure_netconf_yang_polling

    • Added configure_disable_config_key_encryption

      • API configure_disable_config_key_encryption

    • Added configure_spanningtree_sso_block_tcn

      • New API to configure spanning-tree sso block-tcn

    • Added configure_spanningtree_cost_on_interface

      • New API to configure spanning-tree cost

    • Added unconfigure_spanningtree_cost_on_interface

      • New API to unconfigure spanning-tree cost

    • Added unconfigure_spanningtree_sso_block_tcn

      • New API to unconfigure spanning-tree sso block-tcn

    • Added configure_mac_address_table_control_packet_learn

      • New API to configure mac address-table control-packet-learn

    • Added unconfigure_mac_address_table_control_packet_learn

      • New API to unconfigure mac address-table control-packet-learn

    • Added configure_evpn_instance

      • API to configure l2vpn evpn instance

    • Added unconfigure_evpn_instance

      • API to unconfigure l2vpn evpn instance

    • Added configure_evpn_l2_instance_bd_association

      • API to configure VLAN association to EVPN instance

    • Added unconfigure_evpn_l2_instance_bd_association

      • API to unconfigure VLAN association to EVPN instance

    • Added configure_evpn_floodsuppress_dhcprelay_disable_globally

      • API to config l2vpn evpn flooding suppression dhcp-relay disable globally

    • Added unconfigure_evpn_floodsuppress_dhcprelay_disable_globally

      • API to unconfig l2vpn evpn flooding suppression dhcp-relay disable globally

    • Added configure_license_smart_url

      • added api to Configures license smart url smart {url}

    • Added configure_call_home

      • added api to configure to Enter into call-home configuration mode

    • Added configure_exec_prompt_timestamp

      • added api to configure to Exec Prompt Print timestamps for show commands

    • Added configure_flow_record_match_ip

      • API to configure flow record match ip parameters

    • Added configure_flow_record_match_collect_interface

      • API to configure flow record match or collect interface parameters

    • Added configure_flow_record_match_datalink

      • API to configure flow record match datalink parameters

    • Added configure_flow_record_collect_timestamp

      • API to configure flow record match or collect timestamp parameters

    • Added configure_flow_record_collect_counter

      • API to configure flow record collect counter parameters

    • Added execute_request_platform_software_package_install_switch_rollback_auto_copy

      • API to execute request platform software package install switch rollback on-reboot auto-copy

    • Added unconfigure_enable_secret_level API

      • API for unconfigure enable secret level

    • Added configure_ip_arp_inspection_vlan_logging

      • API to configure ip arp inspection vlan logging

    • Added unconfigure_ip_arp_inspection_vlan_logging

      • API to unconfigure ip arp inspection vlan logging

    • Added config_erspan_monitor_session_shut_unshut

      • New API to Configure erspan monitor session shutdown

    • Added unconfig_erspan_monitor_session_no_source

      • New API to Configure no source on erspan monitor session

    • Added unconfig_erspan_monitor_session_no_filter

      • New API to Configure no filter on erspan monitor session

    • Added config_erspan_monitor_session_filter

      • New API to Configure filter on erspan monitor session

    • Added configure_crypto_isakmp_policy

      • added api to configure crypto isakmp policy

    • Added configure_crypto_map_entry

      • updated api to configure crypto map entry

    • Added unconfigure_ip_pim

      • API for unconfigure the ip pim on interface

    • Added configure_mdix_auto

      • New API to configure mdix auto on interface

    • Added unconfigure_mdix_auto

      • New API to unconfigure mdix auto on interface

    • Added configure_switchport_vlan_mapping

      • API to switchport vlan mapping {vlan} on device interface

    • Added unconfigure_switchport_vlan_mapping

      • API to no switchport vlan mapping {vlan} on device interface

    • Added configure_interface_ipv6_isis_router_name

      • API configure ipv6 router under interface

    • Added unconfigure_isis_vrf

      • API to unconfigure vrf under isis

    • Modified configure_isis_with_router_name_network_entity

      • To additionally include vrf under isis

    • Added configure_bgp_isis_redistribution

      • API to configure isis under BGP redistribution

    • Added configure_mpls_te_nsr

      • API to configure NSR for mpls te

    • Added configure_rsvp_gracefull_restart

      • API to configure gracefull restart for rsvp

    • Added configure_ip_source_binding

      • API for to configure ip source binding

    • Added unconfigure_ip_source_binding

      • API for to unconfigure ip source binding

    • Added configure_boot_manual_switch

      • API for to configure boot manual switch

    • Added unconfigure_boot_manual_switch

      • API for to unconfigure boot manual switch

    • Added unconfigure_radius_server

      • New API to unconfigure radius server

    • Added configure_license_smart_transport_callhome

      • added api to configure license smart transport callhome

    • Added execute_license_smart_trust_idtoken

      • added api to execute license smart trust idtoken

    • Added copy_startup_config_from_flash

      • API to copy startup config from the flash memory

    • Added clear_ip_arp_inspection

      • added api to clear_ip_arp_inspection stats and log

    • Added unconfigure_logging_buffered

      • New API to unconfigure logging buffered

    • Added unconfigure_power_efficient_ethernet_auto

      • New API to unconfigure power efficient ethernet auto on interface

    • Added an api clear_ip_ospf_rib to clear rib information from routers configured with ospf

    • Added configure_vlan_group_list and unconfigure_vlan_group_list

      • added api to configure and unconfigure vlan group

    • Added configure_ipv6_dhcp_pool_preifx_delegation_pool

      • added api to configure ipv6 dhcp pool prefix delegation pool

    • Added configure_ipv6_local

      • added api to configure ipv6 local pool or policy

    • Added configure_ipv6_prefix_name_on_interface

      • added api to configure ipv6 address with prefix name on interface

    • Added configure_ipv6_dhcp_client_pd_on_interface

      • added api to configure ipv6 dhcp client pd on interface

    • Updated enable_ipv6_dhcp_server

      • updated api with variable rapid_commit

    • Added configure_logging_buffered_persistent_url

      • New API to configure logging buffered, logging persistent url

    • Added execute_clear_redundancy_history

      • API to execute clear redundancy history

    • Added configure_diagnostic_bootup_level_minimal

      • API to configure diagnostic bootup level minimal

    • Added configure_cos

      • API to configure_cos

    • Modified get_interface_packet_output_rate API

      • Removed dependency with timestamp output

    • Modified configure_ipsec_tunnel API

      • Added arguments to support IPv6 based tunnel

    • Modified config_interface_isis API

      • Added process and metric arguments

    • Added configure_isis_interface_metric API

      • New API to configure ISIS metric under interface

    • Added unconfigure_isis_interface_metric API

      • New API to unconfigure ISIS metric under interface

    • Added get_isis_interface_metric API

      • New API to get ISIS interface metric on interface

    • Modified execute_write_erase API

      • Support multiple devices with Pcall

    • Modified get_routes API

      • Added route and vrf arguments

    • Modified get_next_hops API

      • Added vrf argument

    • Added get_next_hops_with_vrf API

      • New API to get next hop from routing table info

    • Added get_outgoing_interface_with_vrf API

      • New API to get outgoing interface from routing table info

    • Modified restore_running_config API

      • Added delete_after, max_time and check_interval arguments

    • Modified get_vrf_route_distinguisher API

      • Added vrf argument

    • Modified get_devices API

      • Changed testbed argument as optional

    • Added get_devices_simple API

      • New API to get devices based on runtime.testbeds

    • Added check_memory_leaks processor

      • New processor to check memory leak

    • Modified Restore class in abstracted_libs

      • Added timeout argument to restore config

    • Added configure_interface_ip_verify_source

      • API to configure ip verify source on interface

    • Added unconfigure_interface_ip_verify_source

      • API to unconfigure ip verify source on interface

    • Modified configure_ip_arp_inspection_validateip

      • added variable address_type to handle multiple inputs

    • Modified unconfigure_ip_arp_inspection_validateip

      • added variable address_type to handle multiple inputs

    • Added configure_ip_arp_inspection_log_buffer

      • API to configure ip arp inspection log-buffer

    • Added unconfigure_ip_arp_inspection_log_buffer

      • API to unconfigure ip arp inspection log-buffer

    • Added configure_ospf_redistributed_eigrp_metric

      • New API to configure ospf with redistributed eigrp metric-type

    • Added configure_eigrp_networks_redistribute_ospf

      • New API to configure eigrp with redistributed ospf metric-type

    • Added config_interface_ospfv3_cost API

      • API to configure interface OSPFv3 cost dynamic

    • Added unconfig_interface_ospfv3_cost API

      • API to unconfigure interface OSPFv3 cost dynamic

    • Added configure_l2vpn_evpn_flooding_suppression and unconfigure_l2vpn_evpn_flooding_suppression

      • API to Configure and Unconfigure the flooding suppression address resolution disable

    • Added clear_ip_arp_inspection_stats

      • API to Clear ip arp inspection statistics

    • Added the following NVE APIs

      • unconfig_nve_src_intf

      • unconfig_nve_vni_members

      • get_nve_vnis

      • get_nve_interface_tunnel

      • verify_nve_vni_no_entry

      • verify_nve_vni_members_cfg

    • Added execute_clear_platform_software_product_analytics_report

      • added API for execute “clear platform software product analytics report”

    • Added execute_test_platform_software_product_analytics_tdl_periodic

      • added API for execute “test platform software product analytics tdl periodic”

    • Added execute_test_platform_software_product_analytics_data_proc_sql_periodic

      • added API for execute “test platform software product analytics data proc sql periodic”

    • Added get_telemetry_report_all_kpis

      • added API for getting telemetry report all kpis

    • Added verify_license_smart_transport_support_telemetry

      • added API for verifying license smart transport support telemetry

    • Added configure_ipv6_local_pool

      • New API to Configure ipv6 local pool

    • Added uninstall_appliance_package

      • New API to uninstall appliance package

    • Added configure_crypto_map

      • New API to configure crypto map

    • Added delete_mac_acl

      • New API to delete mac ACL

    • Modified configure_mac_acl

      • Modified API to configure mac acl

    • Added unconfigure_mac_acl

      • New API to Un configuring MAC ACL

    • Added configure_switchport_port_security_aging_time

    • Added configure_switchport_port_security_aging_type

    • Added configure_switchport_port_security_maximum

    • Added clear_ipv6_ospf_process API

      • API for clear ipv6 ospf process

    • Added get_traceroute_ipv6_parsed_output

      • API to get parsed output of traceroute ipv6 command

    • Added unconfigure_stack_power_switch

      • API for un configures stack-power switch

    • Added config_policy_map_on_interface

      • New API to configure policy map on interface

    • Added unconfigure_policy_map_on_interface

      • New API to unconfigure policy map on interface

    • Added configure_device_sensor_filter_list

      • added api to configure device-sensor filter-list {protocol} list {list_name} commands

    • Added request_platform_software_process_core

      • added api to configure request platform software process core {process_type}

    • Added request_system_shell

      • added api to login to device system shell

    • Added unconfigure_device_sensor_filter_list

      • added api to unconfigure device-sensor filter-list {protocol} list {list_name} commands

  • linux
    • Added get_snmp_snmpget API

      • API for snmp get request

    • Added get_snmp_snmpgetnext API

      • API for snmp get next request

    • Added get_snmp_snmpwalk_v3 API

      • API for snmpwalk version 3

    • Added set_snmp_snmpset API

      • API to configure via snmpset

  • added unconfigure_stack_mac_persistent_timer

    • New API to unconfigure stack-mac persistent timer

  • common
    • Added verify_ping processor

      • Verify ping result in parallel

    • Modified execute_reload API

      • Added reload_command, error_pattern, devices and exclude_devices arguments

  • blitz

    • Added functionality, that will use timestamps in gnmi Subscribtions to measure transaction_time

  • sdk
    • triggers
      • blitz

        • Added a logic to convert response object to a json to fix the Attribute error

Fix
  • iosxe

    • Modified config_port_security_on_interface

    • Modified configure_archive_logging

      • Added hidekeys, notify syslog fields to API

    • Modified configure_ospf_routing API

      • Modification done to include log_adjacency optional variable

    • Modified clear_flow_exporter_statistics API

      • Modification done to include exporter_name as optional variable

    • Fixed removeMissingComp API

      • Replaced older GNMI get operation with recent one

    • Added enable_system_integrity api

      • API to configure system integrity

    • Modify clear_flow_monitor_statistics API

      • Modified the API by adding monitor_name as argument and switch as optional

    • Modified remove_routing_ip_route

      • Modified the remove ip route API

    • Modified configure_bgp_neighbor_filter_description

      • Fixed the API if condition and description

    • Modified execute_vtp_primary

      • Modified api name in execute vtp primary

    • Modified perform_ssh

      • Added algorithm as an optional argument

    • Modified configure_aaa_authentication_login

      • Added group name argument to the API

    • Modified configure_aaa_authorization_exec_default

      • Added group name argument to the API

    • Modified configure_username

      • Added privilige argument to the API

    • Modified verify_ping API

      • Added AttributeError handling

    • Modified learn_routing processor

      • Fixed initializing default argument value

    • Modified configure_vrf_ipv6_eigrp_named_networks

      • Modified api configure vrf ipv6 eigrp named networks

    • Modified configure_switchport_port_security_mac_address

      • Added optional variable vlan_type to cater vlan parameter

    • Modified configure_switchport_port_security_maximum

      • Added optional variable vlan_type to cater vlan parameter

    • Updated configure_policy_map

      • updated api to configure policy_map

    • Added unconfigure_policy_map_type_service

      • updated api to configure policy_map typ service

    • Modified config_ip_on_interface

      • Added prefix_name options to API

  • common
    • Updated restore_running_configuration processor

      • Enhanced to run in parallel for speed

    • Updated save_running_configuration processor

      • Enhanced to run in parallel for speed

  • added disable_system_integrity api

    • API to unconfigure system integrity

  • blitz

    • Fix to auto validate the keys in response with multiple list entry.

genie.libs.parser

Fix
  • iosxe
    • Modified ShowPlatformSoftwareFedMatmMactableVlan

      • Moved the parser under c9300 folder due to verify_matm_mactable API failure

    • Modified ShowPlatformSoftwareFedQosInterfaceSuperParser

      • modified meter_type regular expression and unit test added

    • Modified ShowHardwareLed

      • Added stack and switch_num options

    • Modified ShowLispEthernetDatabase

      • Added support for parsing IPv6 RLOC addresses

    • Modified ShowStackPowerLoadShedding

      • Fixed parser by adding line.strip()

    • Modified ShowLispDynamicEidDetail

      • Added support for parsing IPv6 map server, map-nofify group and EID addresses

    • Modified ShowLispServiceServerDetailInternal

      • Added support for SGT

    • Modified ShowLispServiceSmr

      • Added support for parsing IPv6 EID addresses

    • Modified ShowLispEthernetMapCachePrefix

      • Added support for parsing IPv6 RLOC addresses

    • Modified ShowLispDatabaseConfigPropSuperParser

      • Added support for parsing IPv6 RLOC addresses

    • Modified ShowLine

      • Added line key to the schema

      • Update regex pattern to support output with and witout line

      • Added logic to handle output that has tty line names cut short

    • Modified ShowInventory

      • Enhanced the parser to get the details of interface type ‘FiftyGigE’ in the output

    • Enhanced ShowDeviceTrackingDatabaseDetails

      • Updated an optional key ‘incomplete’ in schema

      • Enhanced regexp to match ‘time_left’ with form “34 s try 0(6741 s)”

    • Modified ShowLispSessionSuperParser

      • Added support for parsing IPv6 session addresses

    • Modified ShowIpArpInspectionLog

      • Made ‘interfaces’ key as Optional and added unit test.

    • Modified ShowPlatformSoftwareFedQosInterfaceSuperParser

      • Couple of Bind Information parameters are kept as optional and unit test added

    • Modified ShowRunningConfigNve

      • Updated regex pattern <p4_8> to include MVPN address families

    • Updated ShowVtemplate parser

      • Updated parser for “show vtemplate”

    • Modified ShowLispSessionCapability

      • Added support for parsing IPv6 peer addresses

    • Added

      • show platform software fed active vt hardware if-id {ifid}

      • show platform software fed switch {switch_var} vt hardware if-id {ifid}

    • Modified ShowLispSiteDetailSuperParser

      • Added support for SGT

      • Added support for parsing IPv6 registering ETR in merged locators

      • Fixed a parsing issue when short RLOC addresses are used

      • Made instance_id optional in schema

    • Modified ShowPtpPortInterface

      • Added ptp destination mac regex

    • Modified ShowNveInterfaceDetail

      • Add parsing for command ‘show nve interface nve1 detail’, before only ‘show nve interface nve 1 detail’ was supported

      • Add key ‘mcast_encap’ (Optional for backwards compatibility with older IOSXE version show outputs)

      • Add key ‘secondary_ip’ which applies in dual-stack EVPN underlay

    • Modified ShowLispServiceRlocMembers

      • Added support for parsing IPv6 RLOC member addresses

    • Added ShowIpOspfDatabaseDatabaseSummary

      • Parser for ‘show ip ospf database database-summary’

    • Modified ShowLispDatabaseSuperParser

      • Added support for parsing IPv6 RLOC addresses

      • Fixed the ordering of parsing auto-discover-rloc and NO ROUTE TO EID PREFIX

    • Modified ShowPlatformHardwareQfpStatisticsDrop

      • Add logic when there is no global drop stats

    • Modified ShowLispIpMapCachePrefixSuperParser

      • Added support for parsing IPv6 ITR RLOC addresses

    • Modified ShowVrf

      • Fixed to capture route distinguisher status

    • Modified ShowBgpSummarySuperParser

      • Updated regex to capture variation of outputs

    • Modified ShowRedundancyStates

      • Changed unit in schema as optional

    • Modified ShowIpRoute

      • Updated regex to capture variation of outputs

    • Modified ShowIpCefInternal

      • Updated some keys in schema as optional

    • Modified ShowLispEthernetPublication

      • Added support for parsing IPv6 publisher addresses

    • Modified ShowLispSessionRLOC

      • Added support for parsing IPv6 peer and local addresses

    • Modified ShowLispDatabaseEid

      • Made map_servers and locators optional in schema

    • Modified ShowRunningConfigNve

      • Added regex <p3_3_1> to get vxlan encapsulation info

      • Updated regex pattern <p3_4> to accommodate IPv6 mcast group

      • Updated regex pattern <p4_11>, <p4_12>, <p4_13>, <p4_14> to accommodate IPv6 neighbors

    • Modified ShowLispEthernetMapCache

      • Added support for parsing IPv6 RLOC addresses

    • Modified ShowLispInstanceIdServiceStatistics

      • Added support for parsing IPv6 ITR and ETR map resolver addresses

    • Modified ShowLispARDetailParser

      • Added support for parsing IPv6 ETR addresses

    • Fixed ShowPolicyMapTypeQueueingInterfaceOutput

      • Fixed queue status variables queue_limit_bytes, total_drops, bytes_output

    • Modified ShowLispEthernetPublicationPrefix

      • Added support for parsing IPv6 publisher and RLOC addresses

      • Added support for new display format of publisher addresses

    • Modified ShowLispSessionCapabilityRLOC

      • Added support for parsing IPv6 peer and local addresses

    • Added

      • show processes pid

    • Modified ShowPlatformSoftwareWiredClientSwitchActiveFo

      • Modified show platform software wired-client switch active F0

    • Modified ShowLispRemoteLocatorSet

      • Added support for parsing IPv6 RLOC addresses

    • Modified ShowLispPublicationConfigPropSuperParser

      • Added support for parsing IPv6 publisher addresses

    • Modified ShowLispIpv4Publication

      • Added support for parsing IPv6 publisher addresses

    • Modified ShowLispDynamicEidSuperParser

      • Added support for parsing IPv6 map server addresses

New
  • iosxe
    • Modified ShowPolicyMapTypeSuperParser

      • Added ‘burst_bytes’ and ‘rate_bps’ keys support to super parser

    • Modified ShowVlanPrivateVlan

      • Modified ports key as optional

    • Modified ShowCryptoEntropyStatus

      • Modified regular expression to support “CPU jitter”. new change in above 17.10 release.

    • Added ShowCapabilityFeatureMonitorErspanSourceDestination

      • “show capability feature monitor erspan-source”

      • “show capability feature monitor erspan-destination”

    • Added TracerouteIpv6 Parser

      • Parser for “traceroute ipv6 address”

    • Added ShowSdwanAppqoeStatus parser

      • Parser for “show sdwan appqoe status”

    • Added ShowSdwanAppqoeServiceChainStatus parser

      • Parser for “show sdwan appqoe service-chain status”

    • Added ShowSdwanAppqoeDreoptStatus parser

      • Parser for “show sdwan appqoe dreopt status”

    • Added ShowSwitchStackPorts parser

      • Parser for “sh switch stack-ports”

    • Added ShowIsisSrv6LocatorsDetail

      • added parser for show isis srv6 locator details

    • Added ShowPlatformSoftwareTdlContentBpConfig Parser

      • Parser for “show platform software tdl-database content bp config {mode}”

    • Added ShowCableModem

      • show cable modem

      • show cable modem {cm_ipv4_or_ipv6_or_mac}

      • show cable modem rpd {rpd_ipv4_or_ipv6_or_mac}

      • show cable modem rpd id {rpd_mac}

      • show cable modem rpd name {rpd_name}

      • show cable modem cable {cable_interface}

    • Modified ShowPlatformHardwareQfpStatisticsDrop

      • add a new command show platform hardware qfp active statistics drop

    • Added ShowPlatformSoftwareFedMatmMactableVlan

      • parser for ‘show platform software fed active matm macTable vlan {vlan}’

      • parser for ‘show platform software fed switch {mode} matm macTable vlan {vlan}’

    • Added ShowPlatformSoftwareFedSwitchQosInterfaceIngressNpd Parser

      • Parser for “show platform software fed {switch} {mode} qos interface {interface} ingress npd”

      • “show platform software fed {mode} qos interface {interface} ingress npd”

    • Added ShowPlatformSoftwareFedQosInterfaceIngressNpdDetailed Parser

      • Parser for “show platform software fed {switch} {mode} qos interface {interface} ingress npd detailed”

      • “show platform software fed {mode} qos interface {interface} ingress npd detailed”

    • Added ShowPlatformSoftwareFedQosInterfaceEgressSdkDetailed Parser

      • Parser for “show platform software fed {switch} {mode} qos interface {interface} egress sdk detailed”

      • “show platform software fed {mode} qos interface {interface} egress sdk detailed”

    • Added ShowPlatformSoftwareFedQosInterfaceIngressSdk Parser

      • Parser for “show platform software fed {switch} {mode} qos interface {interface} ingress sdk”

      • “show platform software fed {mode} qos interface {interface} ingress sdk”

    • Added ShowPlatformSoftwareFedQosInterfaceIngressSdkDetailed Parser

      • Parser for “show platform software fed {switch} {mode} qos interface {interface} ingress sdk detailed”

      • “show platform software fed {mode} qos interface {interface} ingress sdk detailed”

    • Added ShowLldpCustomInformation

      • show lldp custom-information

    • Modified ShowClnsProtocol

      • Added lsp_mtu in schema

    • Modified ShowInterfaces

      • Added out_broadcast_pkts to exclude

    • Modified ShowIsisTopology

      • Added show isis {address_family} topology to cli_command

    • Modified ShowIpRouteDistributor

      • added updated to exclude

    • Modified ShowIpv6RouteDistributor

      • Added updated to exclude

    • Modified ShowRunInterface

      • Updated schema to capture ISIS level

    • Added ShowRunInterfaceAllSectionInterface

      • New parser show running-config all | section ^interface

    • Added ShowRunSectionVrfDefinition

      • New parser show running-config | section vrf definition

    • Added ShowMplsTrafficEngAutoroute Parser

      • Parser for “show mpls traffic-eng autoroute”

    • Added ShowMplsForwardingTableSummary Parser

      • Parser for “show mpls forwarding-table summary”

    • Added ShowDeviceClassifierAttachedDetail Parser

      • Parser for show device classifier attached detail

    • Modified ShowDeviceClassifierAttachedInterfaceDetail Parser

      • Modified to cater super parser

    • Added ShowInterfaceEtherchannel

      • show interface {interface_id} etherchannel

    • Added ShowInterfacesPrivateVlanMapping Parser

      • Parser for show interfaces private-vlan mapping

    • Added ShowSwitchStackPortsDetail

      • Parser for cli ‘show switch stack-ports detail’

    • Added ShowDlepCounters

      • Added new parser for show dlep counters

    • Added ShowDlepConfigInterface

      • show dlep config {interface}

    • Added ShowXfsuEligibility

      • show xfsu eligibility

    • Added ShowBannerMotd Parser

      • Parser for show banner motd

    • Added ShowPlatformHardwareFedSwitchQosQueueStatsInterface Parser

      • Parser for ‘show platform hardware fed {switch} {switch_var} qos queue stats interface {interface}’

      • ‘show platform hardware fed {switch_var} qos queue stats interface {interface}’

    • Added ShowPlatformHardwareFedSwitchQosQueueStatsInterfaceClear Parser

      • Parser for ‘show platform hardware fed {switch} {switch_var} qos queue stats interface {interface} clear’

      • ‘show platform hardware fed {switch_var} qos queue stats interface {interface} clear’

    • Added ShowL2protocolTunnelInterface

      • parser for show l2protocol-tunnel interface <>

    • Added ShowL2protocolTunnelSummary

      • parser for show l2protocol-tunnel summary under c9300

      • parser for show l2protocol-tunnel summary under c9500

    • Added ShowTableMap Parser

      • Parser for “show table-map {map}”

    • Added ShowIpIgmpGroups

      • parser for ‘show ip igmp groups’

    • Added ShowCtsInterfaceSummary

      • show cts interface summary

    • Added ShowIpv6MldGroups

      • parser for to verify the mld groups

    • Added ShowIpv6MfibSummary

      • parser for toverify the ipv6 mfib summary

    • Added ShowMplsTrafficEngLinkManagementAdvertisements

      • Parser for show mpls traffic-eng link-management advertisement

Add
  • iosxe
    • Added ShowL2vpnEvpnMcastLocal

      • show l2vpn evpn multicast local

    • Added ShowL2vpnEvpnMcastRemote

      • show l2vpn evpn multicast remote

    • Added ShowL2vpnEvpnCap

      • show l2vpn evpn capabilities

    • Added ShowRunSectionL2vpnEvpn

      • show running-config | section l2vpn evpn

    • Added ShowL2vpnEvpnVpwsVc

      • show l2vpn evpn vpws vc id detail

      • show l2vpn evpn vpws vc id <vc_id> detail

    • Added ShowL2vpnEvpnVpwsVcPreferredPath

      • show l2vpn evpn vpws vc preferred-path

genie.telemetry