July 2023

July 25 - Genie v23.7

Module

Version

genie

23.7

genie.libs.health

23.7

genie.libs.clean

23.7

genie.libs.conf

23.7

genie.libs.filetransferutils

23.7

genie.libs.ops

23.7

genie.libs.parser

23.7

genie.libs.robot

23.7

genie.libs.sdk

23.7

genie.telemetry

23.7

genie.trafficgen

23.7

Upgrade Instructions

pip install --upgrade ats[full] # For internal user
pip install --upgrade pyats[full] # For DevNet user

If you have pyATS installed, you can use:

pyats version update

Changelogs

genie

Fix
  • harness
    • Modified Discovery

      • Instatiated synchro dicts earlier to avoid race condition

genie.libs.clean

New
  • iosxe/cat9k

    • Updated the rommon boot clean stage by adding recovery credentials and

  • iosxe

    • Updated dialogs on reload clean stage to support asr1k.

    • Added new clean stage RommonBoot for iosxe

    • Added directory key to install_image stage schema

      • To specify a directory where packages.conf is created

    • Added skip_boot_variable keyto install_image stage schema

      • To skip boot variable handling in install_image stage

genie.libs.conf

genie.libs.filetransferutils

Fix
  • iosxe

    • Update confirm pattern to support Abort Copy prompt

    • Update all file copy patterns to be more strict

genie.libs.health

genie.libs.ops

genie.libs.robot

Fix
  • blitz

    • Fixed decimal_val handling in returns verification

genie.libs.sdk

New
  • iosxe
    • Added enable_cts_enforcement_vlan_list

      • API to configure enable cts role-based enforcement on given vlan range

    • Added configure_default_spanning_tree

      • API to configure default spanning-tree

    • Added configure_access_session_mac_move

      • API to configure access-session mac-move

    • Added unconfigure_access_session_mac_move

      • API to unconfigure access-session mac-move

    • Added hw_module_beacon_RP_active_standby

      • API to configure hw module beacon RP {supervisor} {operation}.

    • Added confirm_iox_enabled_requested_storage_media

      • API to configure iox enabled requested storage media

    • Added set_stack_mode

      • API to set-stack mode

    • Added clear_pdm_steering_policy

      • API for clear pdm steering policy

    • Added configure_interface_bandwidth

      • New API to configure bandwidth on interface

    • Added unconfigure_interface_bandwidth

      • New API to unconfigure bandwidth on interface

    • Added API’s to configure cli commands under gkm group.

      • API to configure_gikev2_profile_under_gkm_group

      • API to configure_client_protocol_under_gkm_group

      • API to configure_gkm_group_identity_number

      • API to configure_rekey_under_gkm_group

      • API to configure_ipsec_under_gkm_group

      • API to configure_server_redundancy_under_gkm_group

      • API to configure_protocol_version_optimize_cli_under_gkm_group

      • API to configure_ip_for_server_local_under_gkm_group

      • API to configure_ipv4_server_under_gkm_group

      • API to configure_pfs_enable_or_disable_under_gkm_group

    • Added configure_interface_no_switchport_voice_vlan

      • API to configure interface no switchport voice vlan

    • Added configure_global_interface_template_sticky

      • API to configure global interface template sticky

    • Added configure_mdt_default

      • API to configure mdt default

    • Added configure_mdt_auto_discovery_inter_as_mdt_type

      • API to configure mdt auto discovery inter as mdt type

    • Added configure_template_pseudowire

      • API to configure template pseudowire

    • Added configure_mpls_ldp_sync_under_ospf

      • API to configure mpls ldp sync under ospf

    • Added configure_member_vfi_on_vlan_configuration

      • API to configure member vfi on vlan configuration

    • Added clear_ip_arp

      • API to clear ip arp

    • Added configure_graceful_reload

      • API to configure graceful reload

    • Added api execute_dir_file_system

      • API to show files present in the filesystem or the subdirectory of the filesystem

    • Added upgrade_hw_module_subslot_sfp cli

      • API to upgrade hw-module_subslot <slot number> sfp <sfp number> <Image path>

    • Added configure_fnf_flow_record

      • API for configure_fnf_flow_record

    • Added unconfigure_route_map_route_map_to_bgp_neighbor API

      • Added unconfigure API corresponding to configure_route_map_route_map_to_bgp_neighbor

    • Added unconfigure_bgp_redistribute_static API

  • sdk

    • Version pinned pysnmp and pyasn1 to fix the type error in execute_power_cycle_device api

Fix
  • iosxe
    • Modified reset_interface

      • added return statement

    • Modified configure_flow_exporter

      • Added if condition to configure source {source_int} on flow exporter

    • Fix vrf syntax for configure_management_routes API

    • Modified configure_service_policy_with_queueing_name

      • added return statement to return the output

    • Modified unconfigure_table_map

      • renamed “unconfigure_table_map” api to “unconfigure_table_map_values” due to duplicate api name

    • Modified configure_table_map

      • renamed “configure_table_map” api to “configure_table_map_values” due to duplicate api name

    • Added unconfigure_400g_mode_for_port_group_onsvl api

      • API to unconfigure 400g mode for port group svl

    • Added configure_400g_mode_for_port_group_onsvl api

      • API to configure 400g mode for port group svl

    • Modified configure_route_map_route_map_to_bgp_neighbor API

      • Refactored to remove and optimize redundant codes

    • Modified configure_bgp_redistribute_static API

      • Added route_map to pass route-map to redistribute static command

    • Modified configure_route_map API

      • Added set_extcommunity to set extcommunity in route-map

    • Modified unconfigure_route_map API

      • Changed permit to Optional argument to delete whole route-map

    • Modified restore_running_configuration API

      • Added condition to avoid the case which Unicon capture prompt

  • blitz

    • Fixed gnmi auto-validation, caused by modifying orginal rpcdata object in GnmiMessageConstructor

genie.libs.parser

New
  • iosxe
    • Added ShowWirelessMeshApBackhaul

      • show wireless mesh ap backhaul

    • Added ShowWirelessTagSiteSummary

      • show wireless tag site summary

    • Added ShowWirelessProfileFlexSummary

      • show wireless profile flex summary

    • Added ShowNmspStatus

      • show nmsp status

    • Added ShowAppHostingDetail

      • show app=hosting detail

    • Added ShowApBleSummary

      • show ap ble summary

    • Added ShowAwipsStatus

      • show awips status {mac_address}

    • Added ShowRomMonSwitchR0

      • parser for show rom-mon switch {switch_num} {process}

    • Added ShowIpOspfRibRedistribution

      • added parser for “show ip ospf rib redistribution”

    • Fixed ShowIpOspfDatabaseExternal

      • added metric_type to the parser “show ip ospf database external”

    • Added ShowIpv6OspfInterface

      • Parser for show ipv6 ospf interface {interface}

    • Added ShowIpv6OspfNeighborDetail

      • Parser for show ipv6 ospf neighbor detail

    • Added ShowL2vpnAtomVc

      • Parser show l2vpn atom vc

    • Added ShowLispPlatformSmrKnownLocatorsParser

      • Parser for “show lisp platform smr known locators”

    • Added ShowLispDecapsulationFilterParser

      • Parser for “show lisp instance-id <iid> decapsulation filter”

    • Updated ShowLispServiceRlocMembers

      • Made field “members” optional in ShowLispServiceRlocMembersSchema

      • Fixed incorrect CLI

    • Updated ShowLispServiceSmr

      • Fixed incorrect CLI

      • Made field “prefixes” optional in ShowLispServiceSmrSchema

    • Updated ShowLispPublisherSuperParser

      • Added support for “?” for field “type”

    • Updated ShowIpv6CefInternal parser

      • Added support for parsing LISP smr state “smr_enabled” in “subblocks”

    • Updated ShowLispIpMapCachePrefixSuperParser

      • Added support for parsing 2-digit expiration time in the format of xdxxh

    • Added ShowPlatformHardwareFedSwitchQosQueueStatsInterface

      • parser for ‘show platform hardware fed active qos queue stats interface {interface}’

      • parser for ‘show platform hardware fed switch {switch_num} qos queue stats interface {interface}’

    • Added ShowPlatformHardwareFedSwitchQosQueueStatsInterfaceClear

      • parser for ‘show platform hardware fed active qos queue stats interface {interface} clear’

      • parser for ‘show platform hardware fed switch {switch_num} qos queue stats interface {interface} clear’

    • Added ShowPerformanceMeasurementSrPolicy

      • show performance-measurement sr-policy

      • show performance-measurement sr-policy detail

      • show performance-measurement sr-policy private

      • show performance-measurement sr-policy verbose

      • show performance-measurement sr-policy detail verbose

      • show performance-measurement sr-policy detail private

      • show performance-measurement sr-policy private verbose

      • show performance-measurement sr-policy detail private verbose

      • show performance-measurement sr-policy name <name>

    • Added ShowControllerVDSLlocal parser

      • Parser for “show controller vdsl {interface} local “

    • Added ShowIpNatRedundancy Parser

      • Parser for “show ip nat redundancy”

    • Added ShowIpPimAutorp Parser

      • Parser for “show ip pim vrf {vrf ID} autorp”

    • Added ShowSdwanClientInterface Parser

      • Parser for “show platform hardware qfp active feature sdwan client interface <interface name>”

    • Added ShowSdwanOmpMulticastRoutes Parser

      • Parser for “show sdwan omp multicast-routes”

    • Added ShowSdwanOmpMulticastAutoDiscover Parser

      • Parser for “show sdwan omp multicast-auto-discover”

    • Added ShowSdwanSecurityInfo Parser

      • Parser for “show sdwan security-info”

  • iosxr
    • Added ShowSegmentRoutingSrv6Locator

      • parser for ‘show segment-routing srv6 locator’

      • parser for ‘show segment-routing srv6 locator {locator_name}’

  • nxos
    • Added ShowHardwareInternalTctrlUsdDpllState

      • parser for ‘show hardware internal tctrl_usd dpll state’

  • viptela
    • Added ShowOrchestratorReverseProxyMapping Parser

      • Parser for “show orchestrator reverse-proxy-mapping”

Fix
  • iosxe
    • Modified ShowAvcSdServiceInfoSummary

      • Added support for secondary address

      • Added support for Never in last connection

      • Added support for case when status is DISCONNECTED but IP is given

      • Simplified parsing

    • Modified ShowFabricApSummary

      • Added support for IPv6 for IP address

      • Added support for spaces by creating more adecuate regex

      • Added support for different join states

      • Simplified parsing

    • Modified ShowLispIpMapCachePrefixSuperParser

      • Added some enhancement

    • Modified ShowLisp

      • Added some enhancement for capability list

    • Modified ShowLispInstanceIdService

      • Added some enhancement

    • Modified ShowPlatformSoftwareFedQosInterfaceIngressNpiDetailed

      • made ‘mark_value’ and ‘mark_type’ as optional keywords

    • Modified ShowKeyChain Parser

      • Modified key id regex to accept both string and numeric keys

      • Added 3 new fields - whether keychain is macsec, cryptographic algorithm of key chain and lifetime of macsec keychain

    • Modified ShowPolicyMapTypeSuperParser Parser

      • Fixed p14_1 regex

    • Modified ShowDeviceTrackingCountersVlan Parser

      • Fixed dropped_message_info regex

    • Modified ShowDlepNeighbors

      • Updated schema and parser to accommodate multiple neighbors under same interface

    • Modified ShowIpv6Mfib Parser

      • Fix p8 regex

      • Added support for L2LISP v6 decapsulation on interface L2LISP0.1502

    • Modified ShowMonitorCaptureBufferDetailed Parser

      • Added new cli

      • Added 3 new keys in Schema

    • Modified ShowMonitorCaptureBuffer Parser

      • Added new cli

    • Modified ShowSdmPrefer Parser

      • Modified macsec_spd_entries key as Optional to support NAT template

    • Modified ShowPolicyMapTypeQueueingPolicyname Parser

      • parsing some more data ‘cir_bps’, ‘bandwidth_remaining_ratio’, ‘priority_level’

      • made ‘class_val’ as optional

    • Modified ShowRunInterface

      • Added 109 and 110 regex for sampler outputs

    • Modified ShowRunAllSectionInterface Parser

      • Added 6 new fields - macsec_enabled,macsec_access_control, mtu, mka_policy, mka_primary_keychain, mka_fallback_keychain

    • Modified ShowRunInterface Parser

      • Added 6 new fields - macsec_enabled,macsec_access_control, mtu, mka_policy, mka_primary_keychain, mka_fallback_keychain

    • Modified ShowRunningConfigNve

      • added optional key ‘arp_ndp_suppression’

      • extended optional key ‘learn_ip_addr’ to l2vpn_global dictionary

    • Modified ShowVersion Parser

      • Modified key id regex to accept optional string

    • Modified ShowLispPublisherSuperParser and ShowLispPublisherSuperParserSchema

      • Making “type” optional for backward compatibility

      • Adding unit test for output without the type column

    • Modified show l2route evpn multicast smet

      • Removed <evi_etag> containing CLI commands which are not required anymore

    • Fix for ShowCryptoIkev2SaDetail parser

      • IOS Change in output syntax “Quantum-safe Encryption using Manual PPK” and “Quantum-safe Encryption using Dynamic PPK”

    • Modified ShowIpv6Mfib

      • Modified p8 to support ipv6 vxlan nexthop address

    • Modified ShowOspfv3Interface

      • Updated regex pattern <p1_1> to accommodate all types of interface indices.

  • ios
    • Modified ShowKeyChain Parser

      • Added old parser code here as that code is matching output of ios show command

  • iosxr

    • Modified show cef details

  • added <drop>, <source_rib> keywords in schema as optional and changed <load_distribution>, <weight_distribution> as optional.

    • Changed the regex pattern for <p1>, <p4>, <p8>, <p9>.

  • nxos

    • Modified show access-lists summary

    • Modified ShowModule

      • Modified the line of code and regex pattern for p3,p4

      • Changed the golder_output2_expected.py file value

    • Modified ShowInterfaceStatus

      • Modified the line code and regex pattern for p1

    • Modified ShowIpEigrpTopology

      • Fix issue in cli command list

    • Modified ShowIpv6EigrpTopology

      • Fix issue in cli command list

    • Fix for ShowModule parser

      • Updated regex for much more tightly controlled matching

  • updated <statistics>, <fragments> in schema as optional.

    • Changed the regex pattern for output.

  • fixed unexpected argument error when cli method of class showl2routeevpnmulticastsmet called

New/Fix
  • iosxe
    • Added ShowLispSubscription

      • show lisp instance-id {instance_id} ipv4 subscription

      • show lisp {lisp_id} instance-id {instance_id} ipv4 subscription

      • show lisp locator-table {locator_table} instance-id {instance_id} ipv4 subscription

      • show lisp eid-table {eid_table} ipv4 subscription

      • show lisp eid-table vrf {eid_table} ipv4 subscription

      • show lisp instance-id {instance_id} ipv6 subscription

      • show lisp {lisp_id} instance-id {instance_id} ipv6 subscription

      • show lisp locator-table {locator_table} instance-id {instance_id} ipv6 subscription

      • show lisp eid-table {eid_table} ipv6 subscription

      • show lisp eid-table vrf {eid_table} ipv6 subscription

      • show lisp instance-id {instance_id} ethernet subscription

      • show lisp {lisp_id} instance-id {instance_id} ethernet subscription

      • show lisp locator-table {locator_table} instance-id {instance_id} ethernet subscription

      • show lisp eid-table {eid_table} ethernet subscription

      • show lisp eid-table vrf {eid_table} ethernet subscription

    • Added ShowLispServerSubscription

      • show lisp instance-id {instance_id} ipv4 server subscription

      • show lisp {lisp_id} instance-id {instance_id} ipv4 server subscription

      • show lisp locator-table {locator_table} instance-id {instance_id} ipv4 server subscription

      • show lisp eid-table {eid_table} ipv4 server subscription

      • show lisp eid-table vrf {eid_table} ipv4 server subscription

      • show lisp instance-id {instance_id} ipv6 server subscription

      • show lisp {lisp_id} instance-id {instance_id} ipv6 server subscription

      • show lisp locator-table {locator_table} instance-id {instance_id} ipv6 server subscription

      • show lisp eid-table {eid_table} ipv6 server subscription

      • show lisp eid-table vrf {eid_table} ipv6 server subscription

      • show lisp instance-id {instance_id} ethernet server subscription

      • show lisp {lisp_id} instance-id {instance_id} ethernet server subscription

      • show lisp locator-table {locator_table} instance-id {instance_id} ethernet server subscription

      • show lisp eid-table vlan {eid_table} ethernet server subscription

genie.telemetry