November 2022

November 28 - Genie v22.11

Module

Version

genie

22.11

genie.libs.health

22.11

genie.libs.clean

22.11

genie.libs.conf

22.11

genie.libs.filetransferutils

22.11

genie.libs.ops

22.11

genie.libs.parser

22.11

genie.libs.robot

22.11

genie.libs.sdk

22.11

genie.telemetry

22.11

genie.trafficgen

22.11

Upgrade Instructions

pip install --upgrade ats[full] # For internal user
pip install --upgrade pyats[full] # For DevNet user

If you have pyATS installed, you can use:

pyats version update

Changelogs

genie

Fix
  • genie.conf

    • Changed default abstraction order to os/platform/model

  • genie.harness

    • Add tims_uid mapping to genie trigger class instance

genie.libs.clean

New
  • iosxe

    • Added warning for removing keys for tftp-boot from next release.git status

    • Added the new clean stage ApplyConfiguration.

Fix
  • iosxe

    • Removed the comment from the reload clean stage schema

genie.libs.conf

genie.libs.filetransferutils

genie.libs.health

genie.libs.ops

New
  • iosxe - cat9k
    • Ops

      • Added Device Ops for cat9k devices

Fix
  • ops
    • Modified Device ops

      • Updated schema to accommodate validation against other parser outputs

genie.libs.robot

genie.libs.sdk

Fix
  • iosxe
    • Modify unconfigure spanning tree priority API

      • Modify API to accept priority as an optional argument

    • Modified/Fixed configure_ipsec_tunnel to swap tunnel mode ipsec just after configuring tunnel ip address.

    • Modified Ping

      • Added ‘extended_data’ variable to Ping.

    • Modified/Fixed configure_ip_on_tunnel_interface class to include ipv4.

    • Added configure_hw_switch_switch_logging_onboard_voltage(switch_number)

      • API to configure hw switch logging onboard voltage

    • Added unconfigure_hw_switch_switch_logging_onboard_voltage(switch_number)

      • API to unconfigure hw switch logging onboard voltage

    • Added configure_hw_switch_switch_logging_onboard_environment(switch_number)

      • API to configure hw switch logging onboard environment

    • Added unconfigure_hw_switch_switch_logging_onboard_environment

      • API to unconfigure hw switch logging onboard volenvironmenttage

    • Added configure_hw_switch_switch_logging_onboard_temperature

      • API to configure hw switch logging onboard temperature

    • Added unconfigure_hw_switch_switch_logging_onboard_temperature

      • API to unconfigure hw switch logging onboard temperature

    • Added configure_clear_logging_onboard_switch_temperature

      • API to configure clear logging onboard switch temperature

    • Added configure_clear_logging_onboard_switch_environment

      • API to configure clear logging onboard switch environment

    • Added configure_clear_logging_onboard_switch_voltage

      • API to configure clear logging onboard switch voltage

    • Modified ConfigIpOnInterface

      • New parameter secondary in config_ip_on_interface to set the IPv4 address as secondary

    • Modified RemoveInterfaceIp

      • New parameter ip_address, mask and secondary in remove_interface_ip to remove the secondary IPv4 address

    • Modified configure_dot1x_cred_profile API

      • Changed the command, updated the parameters(added passwd_type)

  • blitz

    • Fix for Container->List->Leaf testcase for Gnmi Rpc node grouping

    • Process leaf list value for proto encoding before appending it in opfields

    • Fix for validation of property having list type value.

    • Modify gnmi operations to pass credentials for clear-channel mode.

    • Fix for detecting the start of next stream.

    • Correcting multiple key order in opfield as while converting GetResponse() to dictionary, the key orders are not preserved.

    • Change passing parameter to path_elem_to_xpath() function from decode_update()

    • Fix for opfields appending the json_dicts having lists and dict in it.

    • Set default timeout only for GNMI STREAM mode

    • Fix for verify_opfield returning True with Failed log_msg

    • Fix for gNMI ON_CHANGE subscription.

    • Fix GNMI bytes field parsing

  • sdk/powercycler

    • Fixed default auth argument for SNMPv3

New
  • iosxe
    • Added configure_spanning_tree_vlan_root

      • API for configure spanning-tree vlan root

    • Added unconfigure_spanning_tree_vlan_root

      • API for unconfigure spanning-tree vlan root

    • Added configure_spanning_tree_guard_loop

      • New API to add the spanning-tree guard loop in an interface using the command

    • Added unconfigure_spanning_tree_guard_loop

      • New API to remove the spanning-tree guard loop in an interface using the command

    • Added configure_spanning_tree_bpdufilter

      • New API to add the spanning-tree bpdufilter in an interface using the command

    • Added unconfigure_spanning_tree_bpdufilter

      • New API to remove the spanning-tree bpdufilter in an interface using the command

    • Added clear_ipv6_route and clear_ipv6_route_all

      • clear ipv6 route vrf {<optional> vrf} {route} and clear ipv6 route vrf {<optional> vrf} {route} *

    • Fix clear_arp_cache

      • Fixing clear_arp_cache api to handle more options

    • Added configure_source_template

      • API for configuring template from a source template

    • Added unconfigure_source_template

      • API for unconfiguring template from a source template

    • Added configure_commands_to_template

      • API for adding configurations to a template

    • Added unconfigure_commands_to_template

      • API for removing configurations from a template

    • Added configure_interface_ip_verify_unicast_source

      • API for configuring ip verify unicast source on a interface

    • Added unconfigure_interface_ip_verify_unicast_

      • API for unconfiguring ip verify unicast on a interface

    • Added configure_interface_ipv6_verify_unicast_source

      • API for configuring ipv6 verify unicast source on a interface

    • Added unconfigure_interface_ipv6_verify_unicast_

      • API for unconfiguring ipv6 verify unicast on a interface

    • Added configure_ip_igmp_static_group api

      • Api to configure igmp static group

    • Added configure_ip_igmp_join_group api

      • Api to configure igmp join group

    • Added configure_ip_igmp_ssm_map api

      • Api to configure ip igmp ssm-map

    • Added unconfigure_ip_igmp_ssm_map api

      • Api to unconfigure ip igmp ssm-map

    • Added an api clear_ipv6_dhcp_binding to clear ipv6 dhcp bindings in the server

    • Added verify_spanning_tree_root_inc

      • New API to verify the spanning-tree root inconsistancy states on an interface

    • Added verify_spanning_tree_loop_inc

      • New API to verify the spanning-tree loop inconsistancy states on an interface

    • Added configure_spanning_tree_guard_root

      • New API to add the spanning-tree guard root in an interface

    • Added unconfigure_spanning_tree_guard_root

      • New API to remove the spanning-tree guard root in an interface

    • Added configure_radius_server_accounting_system API

      • API to configure radius-server accounting system host-config

    • Added configure_service_template_with_inactivity_timer API

      • API to configure service template with inactivity timer

    • Added configure_service_template_with_vlan API

      • API to configure service template with vlan

    • Added configure_service_template_with_access_group API

      • API to configure service template with access group

    • Added configure_class_map_type_match_any API

      • API to configure class-map type control subscriber match-any

    • Added configure_class_map_type_match_none API

      • API to configure class-map type control subscriber match-none

    • Added configure_template_methods_for_dot1x API

      • API to configure template methods for dot1x

    • Added configure_template_methods_using_max_reauth API

      • API to configure template methods using max reauth and timeout

    • Added configure_interface_udld_port

      • API for configure interface udld port

    • Added unconfigure_interface_udld_port

      • API for unconfigure interface udld port

    • Added configure_udld_message_time

      • API for configure udld message time

    • Added unconfigure_udld_message_time

      • API for unconfigure udld message time

    • Added unconfigure_http_client_source_interface api

      • Api to unconfigure http client source interface

    • Added unconfigure_ip_domain_name api

      • Api to unconfigure ip domain name

    • Added configure_ip_http_secure_server api

      • Api to configure http secure-server

    • Added configure_pki_import

      • added to configure pki import

    • Added configure_pki_export

      • added to configure pki export

    • Added change_pki_server_state

      • added to change pki server state.

    • Added dialogue statemenst in configure_pki_enroll

      • added more dialogue statements in configure pki enroll.

    • Added options configure_trustpoint

      • added more options to handle more configs.

    • Added cmd in configure_crypto_pki_server

      • added a cmd for option database_url_storage_location.

    • Added copy_file

      • added api to copy file locally on device.

    • Added configure_cts_aaa_methods

      • API for configure cts aaa methods

    • Added unconfigure_cts_aaa_methods

      • API for unconfigure cts aaa methods

    • Added execute_install_three_step_issu_package

      • Api for executing three step issu package

    • Added configure_interface_ip_verify_unicast_reversepath

      • API for configuring ip verify unicast reverse-path on a interface

    • Added configure_interface_ip_verify_unicast_notification

      • API for configuring ip verify unicast notification on a interface

    • Added configure_interface_ipv6_verify_unicast_reversepath

      • API for configuring ipv6 verify unicast reverse-path on a interface

    • Added unconfigure_commands_to_template

      • API for removing configurations from a template

    • Added request_platform_software_package_clean

      • API for performing request platform software package clean switch on device

    • Added install_autoupgrade

      • API to perform install upgrade on the device

    • Added verify_no_access_session

      • New API to verify if the access-session monitor is present on an interface

    • Added unconfigure_source_template

      • New API to unconfigure the source template on an interface

    • Added configure_ip_igmp_snooping_tcn_flood api

      • Api to configure flood query count

    • Added unconfigure_ip_igmp_snooping_tcn_flood api

      • Api to unconfigure flood query count

    • Added configure_ip_igmp_snooping_last_member_query_interval api

      • Api to configure the IGMP last-member query interval

    • Added unconfigure_ip_igmp_snooping_last_member_query_interval api

      • Api to unconfigure the IGMP last-member query interval

    • Added configure_platform api

      • Api to configure platform license

    • Added configure_license_smart api

      • Api to configure license smart license

    • Added verify_platform_resources API

      • API to verify the platform resources details in the device

    • Added configure_ip_igmp_ssm_map_query_dns api

      • Api to configure ip igmp ssm map query dns

    • Added unconfigure_ip_igmp_ssm_map_query_dns api

      • Api to unconfigure ip igmp ssm map query dns

    • Added configure_stack_power_mode_redundant

      • API to configure mode redundant on stack-power stack

    • Added unconfigure_stack_power_mode_redundant

      • API to unconfigure mode redundant on stack-power stack

    • Added configure_stack_power_default_mode

      • API to configure default mode on stack-power stack

    • Added configure_interface_vlan_standby_ip api

      • API to configure vlan interface standby ip

    • Added configure_interface_vlan_standby_timers api

      • API to configure vlan interface standby timers

    • Added configure_interface_vlan_standby_preempt api

      • API to configure vlan interface standby preempt

    • Added unconfigure_interface_vlan_standby_ip api

      • API to unconfigure vlan interface standby ip

    • Added unconfigure_interface_vlan_standby_timers api

      • API to unconfigure vlan interface standby timers

    • Added unconfigure_interface_vlan_standby_preempt api

      • API to unconfigure vlan interface standby preempt

    • Added configure_ip_domain_timeout api

      • configures the IP domain timeout

    • Added unconfigure_ip_domain_timeout api

      • unconfigures the IP domain timeout

    • Added unconfigure_ip_http_server api

      • unconfigures ip http server

    • Added configure_ip_http_authentication_local api

      • configures ip http authentication local

    • Added unconfigure_ip_http_authentication_local api

      • unconfigures ip http authentication local

    • Added configure_ip_http_secure_server api

      • configures ip http secure-server

    • Added unconfigure_ip_http_secure_server api

      • unconfigures ip http secure-server

    • Added verify_neighbor_count

      • API for verify the neighbor count

    • Added configure_vrf_forwarding_interface

      • API for Creating vrf forwarding on interface

    • Added unconfigure_vrf_forwarding_interface

      • API for Removing vrf forwarding on interface

    • Added unconfigure_call_home api

      • API to unconfigure call-home

    • Added configure_license_smart_usage_interval api

      • API to configure license smart usage interval

    • added api unconfigure_ipv4_dhcp_relay_helper

      • API for unconfiguring ipv4 dhcp helper address in interface

    • addded api unconfigure_ipv6_dhcp_relay

      • API for unconfiguring ipv6 dhcp relay destination in interface

    • Added configure_interface_switchport_block_address

      • API for configure interface switchport block address

    • Added unconfigure_interface_switchport_block_address

      • API for unconfigure interface switchport block address

    • Added configure_interface_logging_event

      • API for configure interface logging event

    • Added unconfigure_interface_logging_event

      • API for unconfigure interface logging event

    • Added license_smart_factory_reset

      • API to clear licensing information from the trusted store and memory

    • Added disable_debug_all

      • API to turn debugging off

    • Added unconfigure_ipv6_mld_snooping_vlan_mrouter_interface

      • API to Unconfigure ipv6 mld snooping vlan mrouter interface

    • Added configure_clear_ipv6_mld_counters

      • API to Configure clear ipv6 mld counters

    • Added configure_ip_igmp_ssm_map_enable

      • API to Configure ip igmp ssm-map enable

    • Added configure_ip_igmp_snooping_vlan_mrouter_interface

      • API to Configure ip igmp snooping vlan mrouter interface

    • Added configure_debug_ip_pim

      • API to Configure debug ip pim

    • Added configure_ip_igmp_snooping_vlan_static_ipaddr_interface

      • API to Configure ip igmp snooping vlan static ipaddr interface

    • Added configure_ip_igmp_snooping_vlan_mrouter_learn_pim_dvmrp

      • API to Configure ip igmp snooping vlan mrouter learn pim-dvmrp

    • Added configure_spanning_tree_portfast

      • API for configure spanning-tree portfast

    • Added unconfigure_spanning_tree_portfast

      • API for unconfigure spanning-tree portfast

    • Added configure_spanning_tree_uplinkfast

      • API for configure spanning-tree uplinkfast

    • Added unconfigure_spanning_tree_uplinkfast

      • API for unconfigure spanning-tree uplinkfast

    • Added configure_spanning_tree_backbonefast

      • API for configure spanning-tree backbonefast

    • Added unconfigure_spanning_tree_backbonefast

      • API for unconfigure spanning-tree backbonefast

    • Added configure_router_bgp_neighbor_remote_as API

      • API to configure the router bgp neighbor

    • Added configure_router_bgp_network_mask API

      • API to configure the router bgp network mask

    • Added configure_router_bgp_neighbor_ebgp_multihop API

      • API to configure the router bgp neighbor ebgp multihop

    • Added configure_stack_power_switch

      • API to configure stack-power switch

    • Added configure_stack_power_stack

      • API to configure stack-power stack

    • Added unconfigure_stack_power_stack

      • API to unconfigure stack-power stack

    • Added GetInterfaceSecondaryIpv4Address

      • New API get_interface_secondary_ipv4_address to retrieve the secondary IPv4 address

    • Added stop_monitor_capture API

      • API for configuring stop monitor capture cli

    • Added configure_virtual_service api

      • Api to configure virtual-service name

    • Added unconfigure_virtual_service api

      • Api to unconfigure virtual-service name

    • Added unconfigure_virtual_service_activate api

      • Api to deactivate virtual-service

    • Added configure_interface_VirtualPortGroup api

      • Api to configure interface VirtualPortGroup

    • Added unconfigure_interface_VirtualPortGroup api

      • Api to unconfigure interface VirtualPortGroup

    • Added get_show_output_exclude

      • API for “Get Show Output Exclude”

    • Added configure_switchport_dot1q_ethertype and unconfigure_switchport_dot1q_ethertype

      • API for configuring switchport dot1q ethertype and no switchport dot1q ethertype

    • Added configure_spanning_tree_mst_configuration

      • API for to add the spanning tree mst configuration

    • Added unconfigure_spanning_tree_mst_configuration

      • API for unconfigure the spanning tree mst configuration

    • Added configure_eui_64_over_ipv6_enabled_interface API

      • API to Configure eui-64 over ipv6 enabled interface

    • Added unconfigure_eui_64_over_ipv6_enabled_interface API

      • API to UnConfigure eui-64 over ipv6 enabled interface

    • Added configure_ipv6_nd_dad_processing API

      • API to Configure ipv6 nd dad processing

    • Added unconfigure_ipv6_nd_dad_processing API

      • API to UnConfigure ipv6 nd dad processing

    • Added configure_service_policy API

      • Added configure_service_policy API

    • Added configure_interface_switchport_port_security_violation API

      • Added configure_interface_switchport_port_security_violation API

    • Added unconfigure_interface_switchport_port_security_violation API

      • Added unconfigure_interface_switchport_port_security_violation API

    • Added configure_interface_dot1x_timeout_txp API

      • Added configure_interface_dot1x_timeout_txp API

    • Added unconfigure_interface_dot1x_timeout_txp API

      • Added unconfigure_interface_dot1x_timeout_txp API

    • Added configure_interface_dot1x_max_req API

      • Added configure_interface_dot1x_max_req API

    • Added unconfigure_interface_dot1x_max_req API

      • Added unconfigure_interface_dot1x_max_req API

    • Added configure_interface_dot1x_max_reauth_req API

      • Added configure_interface_dot1x_max_reauth_req API

    • Added unconfigure_interface_dot1x_max_reauth_req API

      • Added unconfigure_interface_dot1x_max_reauth_req API

    • Added configure_interface_dot1x_eap_profile API

      • Added configure_interface_dot1x_eap_profile API

    • Added unconfigure_interface_dot1x_eap_profile API

      • Added unconfigure_interface_dot1x_eap_profile API

    • Added configure_interface_dot1x_auth_vlan API

      • Added configure_interface_dot1x_auth_vlan API

    • Added unconfigure_interface_dot1x_auth_vlan API

      • Added unconfigure_interface_dot1x_auth_vlan API

    • Added configure_interface_dot1x_auth_vlan_no_resp API

      • Added configure_interface_dot1x_auth_vlan_no_resp API

    • Added unconfigure_interface_dot1x_auth_vlan_no_resp API

      • Added unconfigure_interface_dot1x_auth_vlan_no_resp API

    • Added unconfigure_ip_route_cache API

      • API to unconfigure ip route-cache on interface

    • Added configure_scale_ipv6_accesslist_config API

      • API to configure acls under ipv6 access-list

    • Added configure_aaa_authentication_login API

      • API to configure aaa authentication login

    • Added configure_aaa_default_group_methods API

      • API to configure aaa default group methods

    • Added configure_aaa_authorization_exec_default API

      • API to configure aaa authorization exec default

    • Added configure_aaa_accounting_update_periodic API

      • API to configuring aaa accounting update newinfo periodic

    • Added configure_aaa_accounting_identity_default_start_stop API

      • API to configure aaa accounting identity default start-stop

    • Added configure_radius_attribute_8 API

      • API to configure radius-server attribute 8 include-in-access-req

    • Added configure_radius_attribute_25 API

      • API to configure radius-server attribute 25 access-request include

    • Added configure_radius_attribute_31_mac_format API

      • API to configure radius-server attribute 31 mac format ietf upper-case

    • Added configure_radius_attribute_31_send_mac API

      • API to configure radius-server attribute 31 send nas-port-detail mac-only

    • Added unconfigure_subinterface API

      • API to unconfigure subinterface

    • Modified config_ip_on_interface API

      • Modified API to configure ipv6 link-local address

    • Added configure_license_smart_transport_cslu api

      • Api to configure license smart transport cslu type

    • Added unconfigure_license_smart_transport api

      • Api to unconfigure license smart transport type

    • Added configure_license_smart_url_cslu api

      • Api to configure license smart url to cslu type

    • Added unconfigure_license_smart_url_cslu api

      • Api to unconfigure license smart url from cslu type

    • Added configure_line_console api

      • Api to configure line console on a line

  • blitz

    • Added support for gnmi 0.8

    • Added proto folder containing protofiles, protomodels and script to generate models from protofile

~
Update
  • iosxe
    • Modified configure_fnf_exporter API

      • Corrected the source_int parameter

genie.libs.parser

Fix
  • iosxr
    • Modified ShowPceIPV4PeerDetail

      • Added Instantiation option for Capabiities to schema as Optional.

      • Added MD5 option to schema as Optional.

      • Added Maximum SID depth option to schema as Optional.

      • Added Last pcerror option to schema as Optional.

    • Modified ShowIsisInterface

      • Added Total bandwidth as Optional parameter to schema.

      • Added Delay normalization as Optional parameter to schema.

      • Added Interval and Offset options in delay normalization to schema.

      • Added Link loss as Optional parameter to schema.

      • Added Metric fallback as Optional parameter to schema.

      • Added Bandwidth and Anomaly options in metric fallback to schema.

      • Modified Adjacency formation, State, Prefix advertisement, Metric, Weight and Mpls as Optional under topology in schema.

      • Added Status option in Ldp sync as Optional parameter to schema.

      • Modified Forwarding address, Global prefix as Optional under address_family in schema.

      • Added <r56> to parse the optional line with the format “LDPv4 Sync Status Achieved”.

      • Added <r57> to parse the optional line with the format “Total bandwidth 1000000”.

      • Added <r58> to parse the optional line with the format “Metric fallback”.

      • Added <r59> to parse the optional line with the format “Bandwidth (L1/L2) Inactive/Inactive”.

      • Added <r60> to parse the optional line with the format “Anomaly (L1/L2) Inactive/Inactive”.

      • Added <r61> to parse the optional line with the format “Delay Normalization Interval0 Offset0”.

      • Added <r62> to parse the optional line with the format “Link Loss 1”.

  • iosxe
    • Modified ShowLispAR

      • changed the regular expression P2 to match any type of ipv6 address

    • Modified ShowDeviceTrackingDatabaseDetails

      • Enhanced the regex to match “time_left” with format “224 s(7177 s)”

    • Modified Ping

      • Added ‘extended_data’ variable to Ping.

    • Modified ShowIpProtocols

      • Fixed to capture ISIS enabled interfaces properly

    • Modified ShowIpv6Protocols

      • Fixed to capture ISIS enabled interfaces properly

    • Modified ShowCryptoIkev2Stats Added Quantum resistance line to parser.

    • Modified ShowInventoryRaw

      • changed the regular expression P1 to work Temp values.

    • Modified ShowIpOspf

      • Updated regex p12_4 to match warning-only

      • Update regex p33 to match warning-only

    • Modified ShowCdpNeighbors parser

      • Added a new command “show cdp neighbors {interface}” in the existing schema.

    • Modified ShowSwitch

      • Made hw_ver parameter as optional to support some of the outputs witout hw_ver.

    • Modified ShowVersion

      • Added system_fpga_version parameter as optional to support some of the outputs with System FPGA Version.

    • Modified ShowHardwareLed

      • modified code to match code for not having SWITCH match or non stack devices, also for IE3x00 devices

    • Modified ShowIdpromInterface.

    • Added the parser in the proper file show_idprom.py.

  • nxos
    • Modified ShowIpv6MrouteVrfAll

      • Updated regex pattern p5_1 to accommodate bridge only outputs as well.

      • Moved the regex patterns outside of the for loop so that they will

    • Modified ShowRouting

      • Updated regex pattern to match nextop line attr “tunnelid” to match hex properly [0-9a-fA-Fx].

      • Updated regex pattern to match nextop line attr “segid” to only optionally match colon.

    • Modified ShowBgpSessions

      • Added regexes p7_1 and p7_2 in order to correctly parse the outputs where there is a line break due to large AS numbers

    • Modified ShowBgpVrfAllAll

      • Reordered <p3_4> to match after <p3_1>, <p3_2>, and <p3_3> to avoid matching nexthop when a network is the only value on the line.

  • cheetah
    • Modified show_capwap_client_rcb

      • Modified capwap image download, hyperlocation options to schema as Optional.

  • deleted the duplicate parser under iosxe/show_platform.py and iosxe/c9300/show_platform.py.

New
  • iosxe
    • Added ShowIpArpInspectionInterfaces

      • show ip arp inspection interfaces {interface}

    • Added ShowTemplateBrief

      • show template brief

    • Added ShowSwitchStackRingSpeed

      • Parser for show switch stack-ring speed

    • Added ShowPlatformMatmMacTable Parser

      • Parser for “show platform hardware fed switch active matm macTable”

    • Added ShowOspfv3Gracefulrestart

      • added new parser for cli “show ospfv3 {pid} graceful-restart”

    • Added ShowOspfv3FloodList

      • added new parser for cli “show ospfv3 {pid} flood-list”

    • Added ShowOspfv3Events

      • added new parser for cli “show ospfv3 {pid} events”

    • Added ShowOspfv3Neighbor

      • show ospfv3 {pid} neighbor

    • Added ShowOspfv3RetransmissionList

      • show ospfv3 {pid} retransmission-list

    • Added ShowOspfv3RequestList

      • show ospfv3 {pid} request-list

    • Added ShowSdwanAppFwdDpiFlows

      • show sdwan app-fwd dpi flows parser

    • Fixed ShowSdwanAppfwdCflowdStatistics

      • Whole method was under “if output” statement - fixed it

    • Added ShowVlanDot1qTagNative

      • show vlan dot1q tag native

    • Added ShowCefInterfaceVlanBrief

      • show cef interface Vlan {id} brief

    • Added ShowCefInterfacePolicyStatistics

      • Parser for show cef interface policy-statistics

    • Added ShowEnvironmentStack

      • show environment stack

    • Added ShowCableDiagnosticsTdrInt

      • show cable-diagnostics tdr interface {interface}

    • Added ShowSnmpEngineid

      • Parsef for show snmp engineid

    • Added ShowSnmpCommunity

      • Parsef for show snmp community

    • Added ShowSnmpMibBulkstatTransfer

      • Parsef for show snmp mib bulkstat transfer

    • Added ShowLicenseHistoryMessage

      • show license history message

    • Added ShowSdwanUtdDataplaneConfig

      • show sdwan utd dataplane config

    • Added ShowPlatformHardwareFedSwitchStateFwdAsicAbstractionPrintResourceHandleClient_le parser

      • Added ShowPlatformHardwareFedSwitchStateFwdAsicAbstractionPrintResourceHandleClient_le parser

    • Added ShowIpOspfNsr

      • added new parser for cli ‘show ip ospf nsr’

    • Added ShowInterfacesTransceiverSupportedlist

      • Parser for show interfaces transceiver supported-list

    • Added ShowIpArpInspectionStatisticsVlan

      • show ip arp inspection statistics vlan {num}

    • Added ShowTemplateInterfaceSourceBuiltInOriginalAll Parser

      • Parser for “show template interface source built-in Original all”

    • Added ShowlldpErrors

      • added new parser for cli “show lldp errors”

    • Modified ShowBoot and ShowBootSystem

      • Modified regexp of boot mode in ShowBoot parser to display boot mode other then ‘device’.

      • Modified regexp of boot mode and boot variable in ShowBootSystem parser.

    • Added ShowIpv6MldSnoopingVlan

      • show ipv6 mld snooping vlan

    • Added ShowIpv6MldSnoopingMrouter

      • show ipv6 mld snooping mrouter

    • Added ShowSpanningTreeInterfaceDetail

      • Parser for “show spanning-tree interface detail”

    • Added ShowSpanningTreeInterface

      • Parser for “show spanning-tree interface”

    • Added ShowSpanningTreeInconsistentports

      • Parser for “show spanning-tree inconsistentports”

    • Added ShowOspfv3Interface

      • show ospfv3 {pid} interface

    • Added ShowMacroAutoDevice Parser

      • Parser for “show macro auto device”

    • Added ShowPlatformSoftwareNodeClusterManagerSwitchB0Node

      • show platform software node cluster-manager switch {mode} B0 node {node}

    • Added ShowPlatformSoftwareFedStateVpSummaryInterfaceIf_id parser

      • Added ShowPlatformSoftwareFedStateVpSummaryInterfaceIf_id parser

    • Added ShowIpCefSummary

      • Parser for show ip cef summary

    • Added ShowPlatformRewriteUtilization

      • parser for chec the rewrite utilization

    • Added ShowAdjacencySummary

      • parser for show adjacency summary

    • Added ShowOspfv3

      • show ospfv3

      • show ospfv3 vrf {vrf_id}

    • Added ShowOspfv3DatabaseSummaryDetail

      • show ospfv3 database database-summary detail

      • show ospfv3 {process_id} database database-summary detail

    • Added ShowRunSectionOspfv3

      • show running-config | section ospfv3

    • Added ShowPmVpInterfaceVlan parser

      • Added ShowPmVpInterfaceVlan parser

    • Added ShowMacAddressTableCount

      • show mac address-table count

    • Added ShowOspfv3StatisticDetail

      • New parser for “show ospfv3 {pid} statistic detail”

    • Added ShowInstallCommitted

      • show install committed

    • Added ShowLoggingOnboardSwitchClilog parser

      • for ‘Show logging onboard switch {switch} clilog’

    • Added ShowLoggingOnboardSwitchActiveStatus parser

      • for ‘show logging onboard switch active status’

    • Added ShowLoggingOnboardSwitchActiveUptimeDetail parser

      • for ‘show logging onboard switch active uptime detail’

    • Added ShowLoggingOnboardSwitchContinuous parser

      • for ‘show logging onboard switch {switch_num} {include} continuous’

    • Added ShowPlatformPmPortDataInt parser

      • Added ShowPlatformPmPortDataInt parser

    • Added ShowMacAddressTableCountVlan

      • Parser for show mac address space

    • Added ShowIpDnsView

      • show ip dns view parser

    • Added ShowAccessSessionsInfo

      • show access-session info

    • Added ShowAaaDeadCriteriaRadius Parser

      • Parser for “show aaa dead-criteria radius”

    • Added ShowCdpTraffic Parser

      • Parser for “show cdp traffic”

    • Added ShowCdpInterface Parser

      • Parsre for “show cdp interface”

    • Added ShowCdpEntry Parser

      • Parser for “show cdp entry”

    • Added ShowCefInterface Parser

      • Parser for “show cef interface {interface}”

    • Added ShowCefInterfaceInternal Parser

      • Parser for “show cef interface {interface} internal”

    • Added parser

      • Added ShowIpAdmissionCache parser

    • Added parser

      • Added ShowAccessSessionEventLoggingMac parser

    • Added ShowAaaSessions parser

      • Added ShowAaaSessions parser

    • Added ShowDot1xStatistics parser

      • Added ShowDot1xStatistics parser

    • Added ShowAaaMemory parser

      • Added ShowAaaMemory parser

    • Added ShowPlatformSoftwareWiredClientSwitchR0 parser

      • Added ShowPlatformSoftwareWiredClientSwitchR0 parser

    • Added ShowPlatformAuthenticationSbinfoInterface parser

      • Added ShowPlatformAuthenticationSbinfoInterface parser

    • Added ShowPlatformHostAccessTableIntf parser

      • Added ShowPlatformHostAccessTableIntf parser

    • Added ShowPlatformSoftwareFedSwitchStateIfmIfIdIf_id parser

      • Added ShowPlatformSoftwareFedSwitchStateIfmIfIdIf_id parser

  • added showiparpinspectionlog

    • show ip arp inspection log

  • iosxr
    • Modified ShowRcmdIsisEventSpf

      • show rcmd isis {isis} event spf {spf_run_no}

    • Modified ShowRcmdIsisEventPrefix

      • show rcmd isis {isis} event prefix {prefix_name}

    • Added ShowRcmdIsisEventPrefixLastDetail

      • show rcmd isis {isis} event prefix {prefix_name} last {event_no} detail

      • show rcmd isis {isis} event prefix {prefix_name} detail

    • Added ShowRcmdIsisEventSpfLastDetail

      • show rcmd isis {isis} event spf last {event_no} detail

      • show rcmd isis {isis} event spf {spf_run_no} detail

    • Added ShowRcmdProcess

      • show rcmd process

    • Added ShowRcmdInterfaceEvent

      • show rcmd interface event

  • show access-session info switch {switch} r0